Not only a simple Press Brake attachment // Laser Engraver with the xTool S1
ฝัง
- เผยแพร่เมื่อ 23 มี.ค. 2024
- Plans in Millimeter: madebythemetalist.etsy.com/de...
Plans in Inch:
madebythemetalist.etsy.com/de...
This time I built a segment press brake. This can not only be mounted on my 20T hydraulic press
• DIY 20 TON Workshop Pr...
but can also be used on any hydraulic press. The whole project turned out to be very universal, not only because everyone has the opportunity to use this press brake on every press, but you also have the opportunity to build your own matrices according to your needs.
Sheet metal bender: • DIY Sheet Metal Bender...
Sheet metal roller: • How to build a DIY She...
Flat steel roller: • DIY Rollbender Roller ...
20ton Press brake: • DIY 20 TON Workshop Pr...
Buildplans to my projects:madebythemetalist.etsy.com
Big thanks to xTool for this awesome laser. This will brings my work on a other level and I have so much ideas with this thing, stay tuned ;)
get your laser: www.xtool.com/products/xtool-...
Friends and Sponsors from my Channel:
xTool Laser: xtool.com/
Stepcraft CNC: shop.stepcraft-systems.com/Home
ESAB Welding and cutting esab.com
Kemper Welding Fume extractions: www.kemper.eu/en - วิทยาศาสตร์และเทคโนโลยี
Great job, great skills, great editing, no talking 👌
One of the reasons i like this channel is the editing.
Pretty quick presentation with the highlights only.
I appreciate that the editing can take a long time too.
Thank you 😊
Yes I always edit the videos so that I would like to watch them myself
Dirk, you are definitely a pro, very nicely done my friend!!!
God Bless 🙌 🙏 Jay.
Another nice build Dirk, I am about half way through a similar build but with the addition of a bearing & broaching press. The trick is getting them all to play nicely together without loosing any accuracy or consistency. A couple of parts from your build are better designed than mine so they will find their was onto my build, thank you kindly.
Next episod of the best yt show on the world. Buckling up and watching.
What alloy was the aluminum? 4T bullnose/die radius for 5356 and at least 2T for 5052? Otherwise the aluminum will stress crack along the outside of the bends. Also, in general, if the inner shoulders of the lower die aren't radiused or lined with paper or plastic sheets (?) there is a 'tear zone' initiated by the scoring of the die's shoulders in the 50 series sheet and plate. Sure seen lots of tanks and other marine fabrications done with knife edge upper dies that ended up ruining perfectly good aluminum sheet that doesn't act the same as steel in a press brake.
Ya, when I was in high school screwing around in the metals shop the aluminum sheet would crack when you bent it exactly as you described.
Very nice project, nicely done. Thank you.
Thanks you 😊
Yet another fantastic project! Thanks for sharing.
Beautiful in it's simplicity. Very well thought out, as usual!
Einfach genial die Umsetzung 🤗 Immer wieder erstaunlich was du alles aus ein paar Rohren, Winkeln und Flachmaterial machst 🙌 Auch dieses mal wieder "on-point" den Film für den Abend serviert mit handwerklichem Können, sauguter Kameraarbeit und Schweissporno 👀 Bin jetzt schon gespannt, was als nächstes kommt 👍
Vielen Danke für das Lob!
Grüße 👋
Unbelievable magnificant and the most beautiful template, given free to all of us, to do it ourselves. Just masterly😃💯💥💪
Not free, but I do understand why not.
Awesome work from beginning to end. Great work brother.
Sehr schönes Projekt!
Vielen Dank Manni 😁
Super cool project as always
That's a really nice build. Cheers SteveO
Thank you 😊
👍🙌👏SUPER!!!
Отличная оснастка к прессу!
Поскольку у меня есть 30т пресс надо будет сделать на досуге. Вещь полезная.
Thank you 😊
Genial, bin gespannt was als Nächstes kommt 😍
Vielen Dank 😊 Ja das wirst du wohl als erstes mitbekommen 😉
@@TheMetalist ich befürchte es 🤣🤣🤣
Einfach wieder herrlich 😁 Video und Ergebnisse 🤩
Vielen Dank 👋
Nicely done
Beautiful man. I have one I bought that has no fingers. You've convinced me to modify the top die for bending boxes.
dope af, gona try it
compact , convenient , apparently very strong ( 1/4" plate ) ? and manually operated - what's not to like knocked it out of the park again , my friend "great work" thanks for sharing
One of these days, this man is gonna fabricate a metalist clone of a bridgeport mill
Good job! Without lathe and milling machine!
Always on top👍😉
Thank you 😊
Ein Rohrbiege Bausatz und was um Rohre auf Gärung zu Bohren wäre echt Bombe 😅
Ja könnte ich mal bauen 😅 wüsste auch sofort wie 😅
Excelente trabajo
vom youtuber zum TV-Star :-), schöner Bericht über deine berufliche Tätigkeit.
Vielen Dank 😊 kann/darf leider nicht privat davon teilen, ist schon sehr interessant 😁
Ich Feier dich für die Tools 👌💪
Vielen Dank 😊
Simple. Yeah, that's... that's exactly what I was thinking
richtig geil, jetzt nur noch elektrische Hydraulik pumpe und Fußpedal perfekt!
Vielen Dank 😊
Ja stimmt....vl kommt das noch 🤔
Grüße
Waouuuu !!! Very good job 👍❤
Работа с металлом мне всегда нравилась 😊
Удачи вам 😊. Я ✍️ ся ,вы???
Nice! Good channel! Liked and subscribed.
Nice work . :)
I'm hoping you do a vertical tube bender soon be so good to finish out my own little shop after making this
Did you use a special rod to weld on the edge or just regular steel filler rod?
Yes its a special hard coating
Now i can be metal bender too...
At 14:01, it says r = 20. To me, though, it looks like the diameter is 20, not the radius.
This took me WAAAY more than 16 minutes!!! Whats up with that? I feel tricked. 😂
Very nice project, i like that is quite compact. I guess that aditional weld on edge is for strength, isn't it? What fill material was used?
Yes its a hard coating. I have to take a look on the box
Are your TIG machines setup with all hand controls or do you have foot controls also?
I have bought but in this video it is just hand control
hello: from minute 14:00 I see a bar with a diameter of 20 millimeters. The radius will therefore be 10 millimeters, not 20. Or am I wrong?
😂😂😂 you are 100% right, i missed that
Браво. 🤝👍👌
Thank you 😊
I really like your videos, this one is very well done. Why did you weld off the edge of the blade, what is the significance of that?
I guess to harden the steel
Thank you 😊 yes its a hart coating
Was hast du für einen adapter am akkuschrauber zum gewindeschneiden?
That was Mental ! . . . er I mean Metal ;-))
What quind of grinding disc du you use? It looks pretty efficient thanks
Why weld the edge of the press dies at the beginning? Hardening hack?
Yes the editing is great, but,, a commentary can go along way to helping if someone wants to reproduce this project.
Do you sell plans?
Is there any update to the black hammer? I am waiting quite a while now. Thank you
Hi Florian,
The black ones have problems with the coating at the moment. But they should be available soon. You could also have one with a different coating
@@TheMetalist,
No, I love black so I will wait. Thank you for the update.
@@FlorianH0867 thank you for your patience😊
Hola . De cuantas toneladas es tu prensa ?
With that Mickey Mouse welding, you know that your toy will fall apart after a day of use.
Wow was für eine Megageile Arbeit ,sieht aus wie bei unserer großen NC Kantbank im Betrieb .Wo hast Du den die kurzen Einsätze gekauft ,die sehen wirklich original wie unsere im Betrieb aus mit der Laserbeschriftung 👍😉 Grüße Marko
Vielen Dank, welche kurzen Einsätze meinst du.
Grüße
@@TheMetalist Alles ok TH-cam ist an der Stelle hängengeblieben wo die Leiste gesägt und gelasert wurde 😉👍Habe es nochmal angeschaut alles Top selbst gemacht 😁
Wow!!!!
what grinding disc. are those?
aber sind das 90° ?
👍
Is this aluminum or steel? I notice alot of American videos are aluminum. Do you have steel videos as well or is it just aluminum. Kindly clarify on what material you are using...
The sparks give it away
I really like the part where the video almost entirely shows him building one thing. Then he demonstrates a COMPLETELY DIFFERENT and press designed ENTIRELY DIFFERENT. And even goes so far as to assemble the original build at the end and does even bother to a piece of 24g sheet metal with it.
You people are all VERY easily impressed.
affengeil 😏
Danke schön 😁 👋
Pure masterpiece video and one of the cleanest metal work on YT, the thread taping seems to be butter 🤩. This very straightforward assemblying of those manifold parts makes me suspect an insane eyeball precision ☺️. Just 2 question , what’s the tonnage of the jack ? Why the thread taping seems to be so smooth and easy, is it a Downcut bit ? Thanks !! 🙏🏼🙏🏾
😎👏👏👏👏👏👏👍
+
As a tool maker, you got the concept, your execution needs work. Learn metallurgy and heat treatment