Make a Multifunctional 4 in 1 Hydraulic Press - DIY TOOLS
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2023
- Make a Multifunctional 4 in 1 Hydraulic Press - DIY TOOLS
Thanks for watching
Mig / mag welding machine : amzn.to/2qEiqgR
Tig welding machine : amzn.to/2VI9J4E
Grinder Makita : amzn.to/3r7cW9m
My Cameras :
Sony 4K : amzn.to/3HelJxO
Panasonic HD : amzn.to/3IIZ1hy
Subscribe : / giannipirola
IF I WANT TO SUPPORT DONATE HERE:
www.paypal.me/gpfaidatediy
#multifunctional #hydraulicpress #giannipirola
Follow me on social media :
/ giannipirola_fai_da_te...
/ gpfaidate
giannipirola.blogspot.it/
/ 1414458128855698
/ giannipirola71
Hello see you soon with a new project
ATTENTION: Informative video not to be replicated, all the actions of this video have been performed safely. So I do not take any responsibility in case of accidents in the replication of this object. - บันเทิง
Super Gerät!!! Versuche mal Rohre zu biegen , die mit Sand gefüllt sind. Rohr mit einem Hplzpfropfen verschließen, feinen, trockenen Sand (ca. 2 mm) einfüllen, durch stoßen und klopfen sauber verdichten und den zweiten Holzwürfel hineinschlagen. Durch stoßen den Seind weiter verdichten und die Holzpfropen nachschlagen bis nichts mehr geht . Jetzt kannst du das Rohr wie gwohnt biegen . Das Ergebnis wird dich überraschen und befriedigen . Zum Schluss Holzpfropfen durch erwärmen des Rohres entfernen und Sand entleeren. Stirnholzwürfel verwenden , diese passen sich automatisch dem Rohr an.
Ok thanks
Very well done both the press build and the video production in making this awesome press. You gave me some great ideas that I want to incorporate into my press build. Thank you very much.
Thanks👍 👋
I like this one, its versatile and not too hard to build. Thanks for posting this tutorial.
Thanks👍👋
great idea! thanks for the inspiration
Thanks👍👋
Bel progetto, semplice, pratico e funzionale.Bravo come sempre.
grazie mille ciao
Super boulot. Merci pour la vidéo.
Merci mon ami 👍👋
Bravo Gianni, ottimo progetto!!!!👍👍👍👏👏👏👏👋👋👋👋
Grazie mille ciao👋👋
Awesome work !!! Greetings from Austria.
Thanks👍👋
Complimenti Maestro 🔝🔝🔝🔝
Grazie miller ciao👋👋
@Gianni Pirola Fai Da Te . Mi sembra strano che un video del genere abbia ottenuto solo 8428 visualizzazioni in nove mesi,per me questo video avrebbe dovuto avere invece milioni di visualizzazioni perchè è davvero spettacolare. Complimenti Gianni !
Grazie mille. TH-cam dopo tanti anni non l'ho ancora capito 😁😁. Ciao Ciro grazie 👍👋
@@GianniPirolaFaidate A chi lo dici, anche io ho postato dei video davvero ben fatti , ma non hanno avuto successo , vedo invece che altre persone pubblicano delle vere stronzate ed hanno invece un grande clamore ! Boh ! A volte mi sento avvilito e scoraggiato per questo Gianni !
@@CiroCerullo eh si ti capisco, infatti non ho mai fatto affidamento sulle visualizzazioni. Non ho aspettative quando pubblico, come va va. Tanto lo faccio per passione e passatempo. 👍😉
Ogni tanto rispunti ed è sempre incredibile ciò che ci regali Gianni! Grazie!
Fai da te... fai da te... ma forse non ci rendiamo conto di che consentano lavoro ingegneristico c'è dietro ogni tuo progetto. È allucinante quello che fai e come l'hai studiato prima. Sei il numero 1 Gianni!
P.s. finisco di guardarlo domattina! 🤣
Grazie infinite Vale Ciao
Not sure how much pressure your jack can make, but with enough pressure it will sheer those upper location-pins off ... and whatever is on the press at that time will hurt you ! Dont do it man ! So please put in some stronger upper-pins, made from high-grade steel, not 10 or 12mm crs.
Other then that, I'd say this is good functioning, good looking and well-presented press. 👍
Accident waiting to happen sorry
Genio total Gianni! Abrazo desde Argentina!
Gracias hola 👍👋
Good work. We shared this video on our homemade tools forum this week 😎
Thanks 👍👋
Grande Gianni! Ottima realizzazione 👍👍👍👍
Grazie Lorenzo ciao
Super bravo, complimenti.
Grazie ciao 👍👋
Super video !!! Complimenti..
Grazie ciao 👍👋
Muy bueno. Felicidades...
Gracias hola 👍👋
Man that is a brilliant idea, I wish you could make more for sale , thank you for sharing 🙏
I'm thinking of making pdfs with the measurements, or even selling it. we'll see in a while. thanks so much Gianni
Well, there were a few design choices I would probably have done differently, but I can't deny that what you came up with all seems to work rather well (And I've always had a bit of a reputation for over engineering and over complicating projects like this).
Nice work.
Thanks my friend 👍👋
Tantissimi complimenti Gianni a tutta questa impressione mole di lavoro. Un caro saluto
grazie amico mio ciao
Good project. Nice video.
Thanks👍👋
Sempre belle idee ciao grande 😉
Ciao Max Grazie
@@GianniPirolaFaidate 💯
excelente idea , tengo una prensa que construí igual a la tuya pero con todas esas ideas la convertiré mas funcional , gracias por tus aportes , un saludo desde CALI- COLOMBIA.
GraIe mille ciao 👍👋 Italia 🇮🇹🇮🇹
Plenty of good ideas here. Had to scan though maybe 5 minutes.
Thanks👍👋
Bellissimo progetto! Amo il fatto che dai i colori del “canale yt” a fine lavoro a tutte le creazioni 😁
Grazie molte ciao 👋👋
Superbe réalisation
Merci 👍👋
This one of the best DIY videos I have seen. Great idea, were can I get the plans?
hi thank you very much. Unfortunately I don't have the exact measurements. however the u-shaped plates are 100*500 mm and the rods are 60*8*50 mm. HI
Очень круто! Я рад, что мне попалось это видео.
большое спасибо, пока
Parabéns guerreiro excelente seu trabalho
Obrigado amigo hola 👍👋
La realizzazione della pressa è la mia preferita
Grazie Nik ciao
Mi sembrava di averli già visti questi progetti!!
Certo ho voluto raggrupparli per rendere l idea delle varie funzioni
Complimenti Gianni progetti stupendi 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Me gusto la idea
Gracias amigo hola👍👋
Exelente amigo buena idea el gato hidráulico de cuantas toneladas estas usando
È due tonnellate ma si può mettere più forte. Ciao amigo hola 👍👋
Nice
Thanks 👍👋
questa realizzazione mi piace davvero! gran bel lavoro.
P.S.
hai mai pensato di fareun pdf con le quote e i materiali utilizzati?
Grazie mille, ci penserò. Ciao 👋👍
Amazing job, great combo of many very usefull tools we can see on YT, adjustable width of the circle bending device is also very nice. Couldn’t imagine this kind of took l without a hydraulic jack I subscribe ! 👍🏿👍🏻
Thanks👍👋
to prevent the plates and rods from rolling it is necessary to make restrictive rings
Ok grazie ciao
Bravo Gianni, hai realizzato una bella pressa con tanti utili accessori, ne prenderò spunto, e da tempo che ne voglio realizzare una, ma adesso è arrivata l'ora, eventuali misure? , Grazie e ciao
Grazie molte Rocco, la misura della base è 50*10 ed è alta 50. Ma le misure non le metto mai perché sono soggettive in base alle esigenze. Ciao
@@GianniPirolaFaidate infatti, grazie cmq in questi casi basta lo spunto, ciao Gianni
Muito bom 👍👍🇧🇷
Obrigado amigo hola 👋👋
What's the "4" in the one? Good job though! Really nice 👍👍👍
Thanks 👍👋
Buongiorno Gianni, complimenti per i tuoi progetti, vorrei chiederti per favore se mi poi dire dove acquisti questi profili di ferro così spessi...Internet? Voglio fare diversi lavori ma non so' dove acquistare del ferro così spesso.Grazie in anticipo.
Devi necessariamente andare da un fabbro Nei negozi non li trovi. Ciao Grazie 👍💪
Please tell me how many tons is your hydraulic jack? Thanks a lot
I used the 2 ton one. HI
ottimo lavoro il martinetto da quante tonnellate è?
Ciao, è da 2 tonnellate. 👍👋
Magnifique travail ! Quelle est l’hauteur de la presse svp ?
50*50*10. Merci mon ami 👍👋
@@GianniPirolaFaidate merci 🙏
Ottimo lavoro. E' possibile avere una lista con dimensioni e spessori del ferro usato. Grazie
Ciao, non ho le dimensioni ma l esterno è 500* 500*100 mm questo può aiutarti. Ciao Grazie
Bonjour. Où avez vous trouvé les ressorts svp ? Il y a une référence spéciale?
Merci
Bonjour, je les ai recyclés d'une machine à laver. Ce sont les ressorts de support du panier. au revoir merci
@@GianniPirolaFaidate 🙏
Molto interessante, bravo! Cosa hai speso circa per il lavoro completo? ...sto seriamente pensando di farne uno anche io😁
Sulle 50 euro. Ciao Grazie
@@GianniPirolaFaidate fantastico!
Sumunistra las medidas de los cortes de los matetiales,para replicarlas por favor
Lo siento, todo está hecho en este momento. pero las medidas exteriores son 50*50*10 cm. Adiós gracias
👍👍
👍👋
Do a tube roller!
Thanks👍👋
👍👍👍👍
Thanks👍👋
👏🏻👏🏻👏🏻👍🏻👍🏻👍🏻✊🏻✊🏻✊🏻
Thanks👍👋
Bitte beim Bohren keine Handschuhe tragen UVV (Unfallverhütungsvorschriften) Danke 😁
Oooook 👍👋
Дядя запомни, нельзя давить прессом на внутреннюю обойму подшипника ☝️
Hai ragione. Grazie
А можно размеры и чертежи!? Пожалуйста 🙏
Чертежей к сожалению у меня нет, размеры 500*500*100 мм. Я все сделал на данный момент. Привет мой друг 👍👋
what meaning of 1° sir?1ft sir?
Seit wann presst man lager über den innenring ein, auch wenn es nur wenige mm sind.
Immer wieder diese pfuschereien
Click bait
Thanks👍 👋
@@GianniPirolaFaidate jederzeit, pfusch ist halt in, in wie insta usw... 😂😂😂
Les soudures ☹️☹️☹️
У меня гораздо лучше и мощнее, зачем столько городить не понимаю.
👍👍👍
На серьёзных щах сделал хрень для опресовки консервных банок...
Thanks😁👍
Do you have any build plans? This looks amazing! I would love to build one myself.
Hi, unfortunately not they are all done at the moment I don't have any measurements, sorry.