Woodturning a large Spalted Birch Bowl
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Woodturning a large Spalted Birch Bowl
And answering /showing if a 1HP lathe can handle a bowlsaver system?
My Website
www.bybrandstru...
Sponsor:
www.traedrejerb...
Video Colour and Material List:
Hampshire Sheen Microcrystalline Wax
www.traedrejer...
Hampshire Sheen Cellulose Sanding Sealer
www.traedrejer...
Hampshire Sheen Danish Oil
www.traedrejer...
Hampshire Sheen Complete products
www.traedrejer...
WoodCut Bowlsaver
www.traedrejer...
If you wish to support my channel please follow the link below
paypal.me/Supp...
The videos are for entertainment only. Woodturning is dangerous. Always seek professional advice and training before using the Lathe or any power tools. If you have any uncertainty before performing any woodturning procedure, stop and learn a safer method. Do not attempt any technique simply because you saw it in one of my videos, I might be doing them wrong!
Very beautiful, spalted wood is amazing,👍👍
Thank you very much, and thank you for watching .. stay safe and have a great day 😀
Хорошая работа, красивая! Рука мастера видна!!! Good job, beautiful! The master's hand is visible!!!
Hi Ivan, thank you very much for the kind comment, i really appreciate it .. 😀😀 And thank you for watching .. stay safe and have a great day 😀😀
Masterpiece 👌🏆 I love it.
Thank you very much i really appreciate your comment .. Thank you for watching . Stay safe and have a great day .. 😀😀
Beautiful bowl with unique and well structured shape.
Thank you very much for the comment i really appreciate it .. Have a great day and stay safe 😀
Really like the shape, nicely proportioned too.
Thank you very much 😀 And thank you for watching .. Stay safe and have a great day 😀
An incredible art piece that will, I am sure, make it for generations to come. I have been experimenting with wet sanding Danish Oil into cracks to stop the cracks and so far been successful. The fill created by the oil is a little darker, but it has always come out looking more like a natural blemish in the wood. Thanks again for an amazing share. Stay safe and keep warm as your winter comes there in the Northern hemisphere.
I have to try that with the Danish Oil .. Thank you very much for the tip.. and thank you very much for the nice comment and for watching my videos.. I really appreciate it .. I hope you have an amazing day and stay safe 😀😀😀😀
Nice spalted wood. I like the shape of the rim. Wel done.👌
Thank you very much .. and for watching .. Have a great day and stay safe 😀😀
what a fantastic design that bowl is I love that rim
Hi Steven, thank you very much for the comment and for watching I really apprciate it 😁Stay safe and have a great day 😁😁
Cool bowi ..outstanding grain...seal with either shellac or sanding sealer ...stay safe...press on 😎
Thank you for watching and for the comment i appreciate it .. I will use your tip next time it come op thanks .. stay safe and have a great day 😀
Beautiful wood and such an unusual design. ❤️
Thank you very much 😀 I am still new to turning so I try to do so many new thinks to see what stile an shape I like, and sometimes I get lucky 😀😀 Thank you for watching .. stay safe and have a great day 😀
It looks good. Thank you.
thank you for watching and for the kind comment i really appreciate it .. stay safe and have a great day .. 😀😀
Very nice form. That is why I like your channel - you produce pleasing, artful pieces.
Thank you very much for that comment I really appreciate it and it makes me wont to turn more .. 😀😀😀 And thank you for watching my videos .. Have a great day and stay safe 😀😀
Love this bowl !
Hi Angelina, Thank you very much 😀 and thank you for watching i really appreciate it .. stay safe and have a great day 😀
very nice turning, came out great
Thank you very much 😀 and thank you for watching .. Have a great day and stay safe 😀
Using an accelerator with CA can reduce the coloring effect as well, it hardens before penetrating and filling the pores of the wood as much. But as was stated before, sealed wood pores will stop the CA from getting in there. Very nice bowl, spalted birch is great.
Hi William, thank you for the tip with the accelerator. I have to try that too.. Thank you very much for watching.. have a great day and stay safe 😀
Nice work, Kim! I have the same problem with using CA glue - best solution I have is to spot sand the surface where the glue was applied.
Hi Rick, Thank you for watching and for the comment 😀 I have done the same with spot sanding, and it works to a degree but special in punkey wood it is har to remove completely, but I got some god tip to with sanding sealer before using the CA I am gonna try that next time.. i have 8 more rough turned blanks from this birch tree with spaltning, so there will be plenty of opportunity to try it out 😀 Have a great day Rick, and stay safe 😀😀 ..
At first i thought it was going to be a wheel or something. Really nice wood and great shape!
Glad you liked the shape I do to, it came out pretty ok .. thank you very much for watching .. stay safe and have a great day 😀😀
Great work, enjoyed watching your techniques. End product looks great.
Thanks so much, i really appreciate it and that you spend time watching my videos ... stay safe and have a great day 😀😀
Looks like the same hollowing tool I bought recently, also using 12mm carbide. Mine might be a bit shorter though.
Haven't worked much with it yet but it cuts very well.
It is a really good tool, i made the handel my self and the handel is around 50 cm as I remember .. when you use it remember to take the tool rest a little more back than normal else the tool will flip on you, dont go past the flat part.. i wont tell you how I know LOL, thank you for watching .. stay safe and have a great day .. 😀
@@WOODTURNINGBYBRANDSTRUP Yup, been there, done that. 😀
Ooh, that was an adventurous undercut rim 😲 Very well done👍 And you were rigth to keep the beautiful spalted grain intact - so gorgeous 🏆 Thank you for such an enjoyable vid🙏 Be safe too. -Mike😷
Hi Mike, Thank you very much for the kind comment and for spending time to watch my videos.. I really appreciate it .. i hope you have an amazing day and stay safe 😀😀😀
Lovely spalting in the wood. To begin with, I did not like the shape of the rim, but it grows on you. Well done. I assume the wood was wet or semi dry since you needed to coat it to prevent spitting.
Hi Sigurdur, Yes it was a little wet like 18 % moisture 😀 and yes the spalting in this Birch is amazing, i can alomst not waite tu turn the rest of the blanks from this log 😀 Thank you for watching .. stay safe and have a great day .. 😀
Hi Any sanding sealer should do before using ca glue I use chestnut love your videos. Dave in the uk
Hi Dave, thank you for the tip, i dont know why I did not think about that 🙄 Thank you very much for watching and for the comment i really appreciate it .. Stay safe and have a great day 😀😀
I have luck with ca colouring by sealing the surface first. Ca still sticks. I use shellac.
Hi Stive, Thank you for watching, and ty for the tip i will 100 % try that next time I Need CA on a smal crack.. Stay safe and have a great day 😀
Same here. A little sanding sealer just around the crack stops it soaking into the surrounding wood.
@Ian Kaos I will 100 % try that next time i need to close a little crack with ca .. Thank you very much.. and also for watching my video.. stay safe and have a great day ..
Lovely bowl. I have the same lathe, where did you get the S shape tool rest?
Hi Mike, it is a great lathe :-) I just added 190 kg to it and it made it a hole different lathe .. The tool rest is a Robert Sorby Modular tool rest system www.robert-sorby.co.uk/woodturning/woodturning-accessories/modular-tool-rest-system/l766-4-toolrests Thank you for watching .. stay safe and have a great day 😀😀
WOODTURNING BY BRANDSTRUP I think I’m going to add a shelf to the lower part of the legs to see if I can stable it a bit more. Thanks for the link. Hopefully you’ll see my channel on TH-cam soon.
@@mikewickham1767 Looking forward to see you channel when you make it,, one other thing i did was to remove the rubber feet, i found them to course most of the vibration i had on the lathe .. beside off balanced blanks ofc :-) if you wont to see a picture how i did it send me a mail .. my mail is in the channel about tab :-)
Hej Kim,
Det er bare så smukt når birk får svamp 😃. Super spændende form du giver den, rart at se noget der er lidt anderledes!
Fik lige kigget på din shop, og du er jo lige ved siden af mig (Er i Næstved).
Fortsæt det gode arbejde!
/Lars
Hej Lars, Nej Næstved er ikke langt væk 😀 Drejer du selv ? og hvis du gør er du velkommen til et shop besøg hvis du er interesseret, også hvis du ikke drejer naturligvis 😀 .. tak fordi du så med, pas på dig selv .. // Kim 😀😀
Hej Kim,
Ja, drejer selv lidt i fritiden, det er mig der har siden fb.me/lpwooddenmark
Kunne da være hyggeligt med et shop visit 😃
Mvh Lars
@@bysonderby Jeg har sendt besked på messenger :-9