SKY JACK - How to operate a Scissor Lift

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024

ความคิดเห็น • 61

  • @ishowyouapple
    @ishowyouapple 7 ปีที่แล้ว +14

    You were born to teach people how to do things. Great explanations and great job!

    • @ixlift
      @ixlift 6 ปีที่แล้ว

      : )

  • @misribanda5555
    @misribanda5555 7 ปีที่แล้ว +6

    The instruction is nice and clean. Simplicity makes a life easier.

  • @phreespirit2730
    @phreespirit2730 6 ปีที่แล้ว +7

    I don’t know what you tAlk’n about, that was my training video, I start work this Monday and I didn’t have a clue how to operate the bloody thing until now✅🤩🇺🇸.. .. thanks, you just certified me😂😂😎

  • @UmairAwan-nz9cq
    @UmairAwan-nz9cq 3 หลายเดือนก่อน

    It's like a good video of all TH-cam.. because good massage and good training and good safely video according to me .. last msg is so beautiful this is only video don't use himself.. first you trying keep lesson and training and then use operating this machine ❤

  • @ivanechevarria7605
    @ivanechevarria7605 6 ปีที่แล้ว +3

    Excellent, simple and clear recommendations, easy to understand!!

    • @raymondharlall
      @raymondharlall  6 ปีที่แล้ว +3

      Ivan Echevarria thanks for taking the time to comment 👌🚨

  • @Greengrass777
    @Greengrass777 7 ปีที่แล้ว +2

    Very clear and simply define basic instructions. Very helpful

  • @robertpoore2420
    @robertpoore2420 5 ปีที่แล้ว +2

    Thank you for the run down , I had my heights training and training for the ESP and tomorrow I am practicing driving the darn thing and on the 21 am being tested for my license for it. So I may watch this couple more times. It would been cool if you did the circle check before operating it. But thanks

  • @federicos9821
    @federicos9821 8 ปีที่แล้ว +3

    hi, nice vídeo man thanks for the info. i have one question. what could happen if you are lifted and you get an oil leak or a power failure? would it gently come down or would it smash to the ground?

  • @chadsimmons6347
    @chadsimmons6347 4 ปีที่แล้ว

    i use one of those lifts everyday hanging pipe in a parking garage, we get garbage rentals, that dont work very well, but its much better than working off a ladder

  • @Johnny_the_5
    @Johnny_the_5 8 ปีที่แล้ว +3

    thank you for the lesson and information.

    • @raymondharlall
      @raymondharlall  8 ปีที่แล้ว +1

      +Johnny Westbrook you are welcome. thank you for following all my videos

  • @nicolemugishabashirahishiz5363
    @nicolemugishabashirahishiz5363 ปีที่แล้ว

    Dear trainor. I hope you are doing well. I appreciate the training. In my country there is no kind of this machine but i see that we need it very much. Should you send me the bill to buy it from your country to Bujumbura? Thank u.

  • @frankvisscher5596
    @frankvisscher5596 7 ปีที่แล้ว +2

    fall protection is required even at ground level when moving the scissor lift. Railings mean nothing if it is tipping over. You may not like it but thats the law. Section 85 of the Regulation for Industrial Establishments (Reg. 851)
    When a worker is in an elevated work platform (such as a scissor lift) that is more than three metres above ground they must be protected from falling. Assuming the lift is secured from moving, then the guard rails of the lift would prevent the worker from falling. However, when the lift is moving there is a risk that a worker could be ejected regardless of the height of the guard rail, and thus needs to be protected from falling. The employer should require workers wear fall protection as a reasonable precaution to protect the worker from a hazard, as per clause 25(2)(h) of the OHSA.
    In addition, it would be expected that employers are aware of and observing the manufacturer’s instructions for the scissor lift, which could include a worker wearing fall protection.

    • @raymondharlall
      @raymondharlall  6 ปีที่แล้ว

      Frank Visscher thanks you very much for sharing 👌

    • @dman2188
      @dman2188 6 ปีที่แล้ว +2

      Railings mean nothing if its tipping over and so does wearing a harness .. that's why people in charge of safety have reputations as idiots sometimes .. because they use the law to justify why we should do something and not common sense

    • @stevepatenaude8976
      @stevepatenaude8976 5 ปีที่แล้ว

      The manufacturer and OHSA state that while in motion you must be tied off

  • @luxurycarkey7207
    @luxurycarkey7207 6 ปีที่แล้ว

    Great video also what nike shoes are you wearing they look comfortable thanks

  • @hangngoaigiare
    @hangngoaigiare 7 ปีที่แล้ว +1

    great video for an amateur

  • @tallboylifts
    @tallboylifts 7 ปีที่แล้ว +1

    Hi Raymond, There is a cushion valve in the hydraulic wheel drive. I want to understand how it functions.

    • @raymondharlall
      @raymondharlall  6 ปีที่แล้ว +1

      J&G Work Formula I am not familiar with the Machanic’s

  • @waynevietnam
    @waynevietnam 7 ปีที่แล้ว +3

    Pretty good video but I was surprised to hear that 3 meters is 9 feet.

  • @samanthablinn3468
    @samanthablinn3468 8 ปีที่แล้ว +4

    The only thing I heard was the information about the height requirements when fall protection is required. OSHA actually considers a scissor lift to fall under the scaffolding category. You do not have to wear fall protection as long as the guard rails are adequate.

    • @nathanrayburn4659
      @nathanrayburn4659 7 ปีที่แล้ว +1

      Anyway you can tell me where it says that so I can show my safety coordinator

    • @Phongtech
      @Phongtech 7 ปีที่แล้ว +1

      www.oshatraining.com/Fall-Protection-Requirements-for-Aerial-Lifts.php explains why you don't need a harness

    • @vjfjv
      @vjfjv 7 ปีที่แล้ว +4

      fall protection is required even at ground level when moving the scissor lift. Railings mean nothing if it is tipping over. You may not like it but thats the law. Section 85 of the Regulation for Industrial Establishments (Reg. 851)
      When a worker is in an elevated work platform (such as a scissor lift) that is more than three metres above ground they must be protected from falling. Assuming the lift is secured from moving, then the guard rails of the lift would prevent the worker from falling. However, when the lift is moving there is a risk that a worker could be ejected regardless of the height of the guard rail, and thus needs to be protected from falling. The employer should require workers wear fall protection as a reasonable precaution to protect the worker from a hazard, as per clause 25(2)(h) of the OHSA.
      In addition, it would be expected that employers are aware of and observing the manufacturer’s instructions for the scissor lift, which could include a worker wearing fall protection.

    • @jimmycrayton9254
      @jimmycrayton9254 7 ปีที่แล้ว +1

      Samantha Mangan l

    • @raymondharlall
      @raymondharlall  7 ปีที่แล้ว +2

      Frank Visscher thank you for your valuable input sir.

  • @burhamkarimb560
    @burhamkarimb560 6 ปีที่แล้ว +1

    Don’t worry about him please he is from any where is ok 👍🏼

  • @tristanmathesonsinventory2443
    @tristanmathesonsinventory2443 6 ปีที่แล้ว +1

    Pat on the back for that

  • @정우산업렌탈
    @정우산업렌탈 7 ปีที่แล้ว +1

    very good~~

  • @muhammedessam8032
    @muhammedessam8032 4 ปีที่แล้ว

    I want catalog of electric control ,please

  • @alfredodiaz7000
    @alfredodiaz7000 3 ปีที่แล้ว +1

    Personally I wouldn’t want to wear a harness because if it tips over, you just built a human catapult and you will probably get squished.. that’s just me though.

    • @raymondharlall
      @raymondharlall  2 ปีที่แล้ว +1

      thank you for you comment. I really appreciate you. Be sure to support my channel by Subscribing :) Raymond

  • @iceagestoneage8067
    @iceagestoneage8067 6 ปีที่แล้ว +1

    thanks

    • @raymondharlall
      @raymondharlall  6 ปีที่แล้ว +1

      thank you for watching and commenting

  • @burhamkarimb560
    @burhamkarimb560 6 ปีที่แล้ว +1

    Don’t worry wherever he from. Any way he is a. Normal person.

  • @ixlift
    @ixlift 6 ปีที่แล้ว +1

    Please come and see our machine.

    • @raymondharlall
      @raymondharlall  6 ปีที่แล้ว +1

      william wei thanks would love to 😃

  • @bechirboukedi8768
    @bechirboukedi8768 8 ปีที่แล้ว +1

    easy use do u show us corrective default.

  • @jmtexx
    @jmtexx 3 ปีที่แล้ว

    So why put on the lever if it will do nothing for you? also the strap needs to be by your pecs.

    • @raymondharlall
      @raymondharlall  2 ปีที่แล้ว

      thank you for you comment. I really appreciate you. Be sure to support my channel by SUBSCRIBING :) Raymond

  • @disjonrickjacobs689
    @disjonrickjacobs689 8 ปีที่แล้ว +1

    how you drive a forklift

  • @stevesmith-wc2gb
    @stevesmith-wc2gb 7 ปีที่แล้ว +1

    It actually says 6ft

  • @ammarbasrah1362
    @ammarbasrah1362 3 ปีที่แล้ว

    schematic diagram for scissor lift power and control circuit plz

    • @raymondharlall
      @raymondharlall  2 ปีที่แล้ว

      thank you for you comment. I really appreciate you. Be sure to support my channel by SUBSCRIBING :) Raymond

  • @Tonyyail
    @Tonyyail 4 ปีที่แล้ว

    Fuck a harness if I die , I die

  • @bechirboukedi8768
    @bechirboukedi8768 8 ปีที่แล้ว +2

    spare part stock .

  • @laurenbermingham4406
    @laurenbermingham4406 6 ปีที่แล้ว +1

    You’re all talk pal
    No elevation, Irwin is on a course tomorrow and you’ve been no help whatsover. Thanks for nothing!!