Jesse from Durante Rentals teaches you how to use a scissor lift with the Genie GS-3232 electric slab scissor. For more info check out duranterentals.com
I just learned how to use this lift at work I was playing around with a fidget spinner drone and got it stuck like 20 feet on a beam, thanks for explaining how to operate it, it was surprisingly easy 👌
It is very important that you perform all of the functions test for the Skyjack Scissor lift because one of the checks involves disengaging the brakes and then reengaging the brakes. If you don't do the function test the brakes may be disengaged before you start operating the lift and if you are on a level surface it may give a false indication that the brakes are working but once you are elevated it might take off rolling on you and there is nothing you can do but hold on and pray.
wow Nice video.. It really helped to know about how to operate a genie scissor lift. I am having a normal scissor lift there functions are also same. Mtandt lanka is a company who provides scissor lift rental at affordable rate.
Great video! Thank you. I'm hoping some here can help! I have a Genie GS3232. Whenever I move full throttle forward, the lift automatically turns to the right. If I throttle slowly it goes straight as intended. Anyone else ever have this issue? Thanks in advance.
I was using a genie lift one time and I was probably about 20ish feet in the air when it decided not to lower itself. Every other function of the lift worked except going down. Also the controls/emergency release on the bottom of the lift wouldn’t work either. Someone had to grab me a ladder and the lift stayed in the air until a maintenance tech could come out...
He mentioned the level sensor, but did not mention the swing arms that deploy when the lift is raised. If you look at the 3:17 mark and watch the very bottom of the lift you see a swing arm come out from under the lift, that's a very important safety feature as well, if that swing arm is blocked by a rock or speed bump the lift will rise ~12 " and then stop. Those swing arms help prevent the lift from tipping over that's what their for but he didn't even mention them. I don't know exactly what they're called but they're kind of like out riggers they help stabilize the lift.
See I’ve been using one the last week and working about 35-40 feet high. Every time you would go up, it would stop at about 12-15 foot. Was concerned so asked the lead man what it was doing. “It stops because the speed changes.” Now I know why it was actually stopping… Fucker was swaying all over the place.
As far as batteries the rental company should be checking that as the renter you should be able to use it with no issues. But always do the normal inspection for safety issues before using it.
That's not what i'm asking. I use it daily to do commercial electrical work in large chain grocery stores where it gets packed with customers. Some store managers don't like it, and I've even had a customer complain to the store manager that I shouldn't be using it if I don't have a spotter due to "osha" rules. I don't believe him, pretty sure he just wanted to complain but I want to be sure that I can use one by myself without getting me or my company fined.
Good video but I was concerned that you did not use any PPE (gloves, safety glasses, fall protection, etc.) when touching the batteries and that you did not drop the safety arm when you reached under the raised platform. These are "little" things to an experienced service technician but they are the things that will get newbies injured or even killed.
Why would you wear fall protection when checking the batteries numb nuts, do you do it suspended from the platform or something? Much easier to do it on the ground.
@@rsoul7282 Charles actually had great point but typed it incorrectly. Use gloves and safety glasses with the batteries and a safety harness getting on the lift. You must have a safety harness on when operating one of these scissor lifts. I don't know why this instructor didn't mention a safety harness..You might possibly be required to wear a hard hat also.. I remember taking a class years ago but can't remember every detail. And to actually refer to somebody that's concerned about using equipment safely as NUMB NUTS is belittling to your own character..
Keneo Fugotti my friend, wearing a harness is absolutely not a requirement when operating a scissor, if you were to fall out of one while wearing a harness in all likelihood you would be killed by smashing into the scissor stack or pull the machine over if you are high enough. The only time you would consider wearing one is if short sighted safety policy at a workplace requests one. Apologies for my previous harsh language.
Loved the demo. Going to rent one soon and wanted a run through. But DUDE! You are clearly 30+, learn to tie your shoes. Especially working in a rental place around equipment. And think about some steel toes.
Hello why am I doing your job when I rent a scissor lift or a material lift they should be inspected before it enters the job site so why is it my job to check your job
This is bullshit, you didn't even smash it into a wall, bust off a limit switch, run the batteries dry, tape up the gate, drop it from a crane, you clearly do not know how to use this machine as it is intended.
Damn, forget luxury cars. I would love one of these plated in 24 carat gold. I would dress to the nines and drive round town like an emperor or a Pharaoh.
Why anybody would pick a genie scissor reach over a Skyjack scissor reach boggles my mind. Everything about Genie brand sucks. Rent a Skyjack you will not be disappointed
worst safety instructional video ever you can not raise or lower platform without safety harness and being tied off also your supposed to lower platform completely before moving
I just learned how to use this lift at work I was playing around with a fidget spinner drone and got it stuck like 20 feet on a beam, thanks for explaining how to operate it, it was surprisingly easy 👌
Thanks for the training - haven't used one of these for a couple of decades, needed a quick refresher
It is very important that you perform all of the functions test for the Skyjack Scissor lift because one of the checks involves disengaging the brakes and then reengaging the brakes. If you don't do the function test the brakes may be disengaged before you start operating the lift and if you are on a level surface it may give a false indication that the brakes are working but once you are elevated it might take off rolling on you and there is nothing you can do but hold on and pray.
Thumbs up! Great demo!
when learning, im told best keep it low down when moving around just for extra stability - thanks for sharing
wow Nice video.. It really helped to know about how to operate a genie scissor lift. I am having a normal scissor lift there functions are also same. Mtandt lanka is a company who provides scissor lift rental at affordable rate.
Great Video
Make sure you're gonna make sure, before you make sure. :-)
thank you vert well done.
Is there a way the top portion can collapse won’t fit through the door
Awesome. Thanks a lot
Can anyone tell me the formula needed to get the allowable speed at a specific height of the lifter for it to not buckle.
Good video thanks
thanks im certified now
Great video! Thank you. I'm hoping some here can help! I have a Genie GS3232. Whenever I move full throttle forward, the lift automatically turns to the right. If I throttle slowly it goes straight as intended. Anyone else ever have this issue? Thanks in advance.
I take it that the 3232 means that it is a 32 ft. lift. am I right?
Engineer Battery not getting charge ,what may be the problem??
Thank you!!
do not physically touch hydraulic lines and fittings during any part of the inspection as this poses a pressure injection hazard to the individual.
Thanks
I was using a genie lift one time and I was probably about 20ish feet in the air when it decided not to lower itself. Every other function of the lift worked except going down. Also the controls/emergency release on the bottom of the lift wouldn’t work either. Someone had to grab me a ladder and the lift stayed in the air until a maintenance tech could come out...
that's scary, by right the Manual Lowering/Emergency Release should play it's role...
I had to climb down the back of one at work today while it was up. No bueno.
Shoulda asked the tech what happened foo
He mentioned the level sensor, but did not mention the swing arms that deploy when the lift is raised. If you look at the 3:17 mark and watch the very bottom of the lift you see a swing arm come out from under the lift, that's a very important safety feature as well, if that swing arm is blocked by a rock or speed bump the lift will rise ~12 " and then stop. Those swing arms help prevent the lift from tipping over that's what their for but he didn't even mention them. I don't know exactly what they're called but they're kind of like out riggers they help stabilize the lift.
I was surprised that the up-down didn't even work until the outriggers were set down, even on a level, indoor surface. but glad I watched the video.
See I’ve been using one the last week and working about 35-40 feet high. Every time you would go up, it would stop at about 12-15 foot. Was concerned so asked the lead man what it was doing. “It stops because the speed changes.”
Now I know why it was actually stopping… Fucker was swaying all over the place.
Is this made for cleaning RV’s?
No. It's made for lifting people.
As far as batteries the rental company should be checking that as the renter you should be able to use it with no issues. But always do the normal inspection for safety issues before using it.
How much is it
more complete instructions , than most, including JLG and Genie
Does anybody know if you need a spotter when operating one? I work by myself and don't want any problems
UFOria212 no you dont, i learned to use,one in five minutes
That's not what i'm asking. I use it daily to do commercial electrical work in large chain grocery stores where it gets packed with customers. Some store managers don't like it, and I've even had a customer complain to the store manager that I shouldn't be using it if I don't have a spotter due to "osha" rules. I don't believe him, pretty sure he just wanted to complain but I want to be sure that I can use one by myself without getting me or my company fined.
In a crowded area with customers or objects I’d recommend having a spotter to reduce the chance of an accident.
Then u dont need a spoter
No industrial equipment shall be operated without a flagman or spotter as per OSHA.
Good video but I was concerned that you did not use any PPE (gloves, safety glasses, fall protection, etc.) when touching the batteries and that you did not drop the safety arm when you reached under the raised platform. These are "little" things to an experienced service technician but they are the things that will get newbies injured or even killed.
Why would you wear fall protection when checking the batteries numb nuts, do you do it suspended from the platform or something? Much easier to do it on the ground.
@@rsoul7282 Charles actually had great point but typed it incorrectly. Use gloves and safety glasses with the batteries and a safety harness getting on the lift. You must have a safety harness on when operating one of these scissor lifts. I don't know why this instructor didn't mention a safety harness..You might possibly be required to wear a hard hat also.. I remember taking a class years ago but can't remember every detail. And to actually refer to somebody that's concerned about using equipment safely as NUMB NUTS is belittling to your own character..
Keneo Fugotti my friend, wearing a harness is absolutely not a requirement when operating a scissor, if you were to fall out of one while wearing a harness in all likelihood you would be killed by smashing into the scissor stack or pull the machine over if you are high enough. The only time you would consider wearing one is if short sighted safety policy at a workplace requests one. Apologies for my previous harsh language.
Where is your harness?
How much to rent?
Hello Jenny. Our rates start at $160 per day. Please call us at 1-800-DURANTE for more info.
Make sure isn't missing any chunk out of it!
mohammad abazari honestly I once used a scissor lift and I didn’t the lift was missing it’s wheels and I almost died
Lol
What will happen if we plug the charger and work???
It damages the batteries over time not recommended
This guy should be a tour guide
Youll wanna put the lock in b4 u stick your arm in there to check stuff
Look i just need to know how to turn the piece of Krap on so i can move it out of my Freight staging lane. GAWD!
F'n Gomer Pyle at the helm in this vid.
Bro same
Safety Glasses, gloves and tied boots shoestrings should also be checked.
I missed the part about doing donuts, fully extended
اريد عرض سعر
Bet OSHA loves this video that has no harness being used
Kenny Lenart you don't need a harness in a scissor reach all that does is cause more chance of getting hurt, you don't fall off your balcony do you?
@@jimritzheimer7465 What about scissors with just a chain on the back and no kick plate? I'm sure you could fall through that
Loved the demo. Going to rent one soon and wanted a run through. But DUDE! You are clearly 30+, learn to tie your shoes. Especially working in a rental place around equipment. And think about some steel toes.
MIKE SCHUMACHER don't do it man rent a Skyjack
Where is your harness buddy
Hello why am I doing your job when I rent a scissor lift or a material lift they should be inspected before it enters the job site so why is it my job to check your job
Pedro Adriano safety guy safety.
so you dont die
I lost count the number of safety violations I saw in this video.
This is bullshit, you didn't even smash it into a wall, bust off a limit switch, run the batteries dry, tape up the gate, drop it from a crane, you clearly do not know how to use this machine as it is intended.
1
No harness? Omg
I think it might be helpful info.. but the background noise is fing terrible. Can't hear much of what you say. I am a tad bit hard of hearing.
Damn, forget luxury cars. I would love one of these plated in 24 carat gold. I would dress to the nines and drive round town like an emperor or a Pharaoh.
You can't see where your hand are on the control panel. Next time zoom in
drunk cam
This is a bad instructional video. Need a close up of the buttons.
Why anybody would pick a genie scissor reach over a Skyjack scissor reach boggles my mind. Everything about Genie brand sucks. Rent a Skyjack you will not be disappointed
worst safety instructional video ever you can not raise or lower platform without safety harness and being tied off also your supposed to lower platform completely before moving