Exceptional work, you have done great. The finish is just perfect and flawless. I would suggest you to use a bench grinder motor for wire brush and buffing, this way you will have better control and wont need an extra guy to hold the panel for you. Also it will make you work faster. Anyways you are doing great.
A pretty good job with the limited Tooling you had. But I couldn't hand it back to the Customer. The recess holes for the Screws had not been given ANY Attention. So they still contained Oxidation/Corrosion. And polish residue. Its the small detail that is the most important part of this job.. But still nice work guys 👍
You should use white 100% cotton terry cloths. Those paper towels are scratching it. Looks good for sure but in the right sun light the clarity won’t be completely there
You use 320 and 600 grit paper on this project and 220/400 on other ones then move to felt buffing wheel on grinder and remove the scratches. I would like to know about that polish because when I do it the sand marks are very difficult to get off and I used 800 to get oxidation off followed by felt pad on grinder with Blue Magic (which is supposed to be a “B Cut” polish. What am I missing?
Hi my good friend, the cartoon was really great, but thank you for telling me what the liquid was that you used to pay. I am from Iran and I do not know what it is. Thank you for telling me what it was !!
After polishing I guess he used clear coat. Just a guess because I have seen many auto painters here in Sri Lanka apply clear coat on chrome parts after polishing.
පිරිත් නුලෙන් අදුන ගත්තේ පට්ට මචං❤❤❤❤❤❤
I've ordered a CD50 Benly and it's side cover has also seen better days, so I'll definitely use this video as a guide.
what substance can i use when i don't have B-Cut Super? please answer
අඩෝ මං හිතුවේ උඹලා ඉන්දියන් කාරයෝ කියලා. පට්ට මචී 👌
what substance can i use when i don't have B-Cut Super? please answer
Exceptional work, you have done great. The finish is just perfect and flawless. I would suggest you to use a bench grinder motor for wire brush and buffing, this way you will have better control and wont need an extra guy to hold the panel for you. Also it will make you work faster. Anyways you are doing great.
what substance can i use when i don't have B-Cut Super? please answer
Awesome work. And like the trick of clear coat after buffing that will last longer and no need to buff again and again .👍
what substance can i use when i don't have B-Cut Super? please answer
B cut is a rubbing compound.
1:50 i really enjoyed and laughed on that sound 😂😂😅😅
Nice Video! why do you use clear coat? i ask because I don't know
A pretty good job with the limited Tooling you had. But I couldn't hand it back to the Customer.
The recess holes for the Screws had not been given ANY Attention.
So they still contained Oxidation/Corrosion.
And polish residue.
Its the small detail that is the most important part of this job..
But still nice work guys 👍
जबरदस्त तरीका है काम करने का 👍
I am from INDONESIA 🇮🇩 nice👍
Mantul
Exvellent work. Woh that bike is made in Japan,
what substance can i use when i don't have B-Cut Super? please answer
Used my formula to clean that frozen oil very effective easy to clean the oily engine
Great result! Can I bring my Honda’s too?! 😉👍🏻
Cleaning up the world, one piece at a time! 🌍👍
what substance can i use when i don't have B-Cut Super? please answer
Saludos desde Ecuador.
Genial video brother
I tried it bro. It really works. Thank yoy
creative junior can you tell me the name of oil
Mohammed Safroon i used the brand grand master to remove the paint and larry oil to shine. Ill post it on my video
This is aluminum
Very relaxing video
Impresionante excelente trabajo saludos desde chile
Cómo se llama ese disco amigo ?
Guru of cleanliness
Wax on, wax off, mirror shine. Wow. Superb.
Awesome bro u gave me idea of engine cover modification keep it up bro
@Usman Khan ាា
what substance can i use when i don't have B-Cut Super? please answer
Esto Sii es real No fake!! Muy bueno
i like your video. good job
Nice work.
Damn, thats hella bright. Brighter than may future
I will be there for I know I will iikkkl
F hi Jo IP opp IP opp œo
Admirable. No fue tiempo desperdiciado.
Eso ultimo que le paso con pistola de pintar era eso que se llama laca verdad? por que el motor levanta temperatura y no se si eso aguantara
@@ecopower6245 si aguantará, es claro que va a haber temperatura, pero esa parte no integra el grupo térmico, no pasa nada.
Soap water or normal water sprayed during sanding
I am from Thailand nice and fantastic video
what substance can i use when i don't have B-Cut Super? please answer
after applying clear coat, can i just use a metal polish to maintain its shininess?
awesome transformation.. !! why dont you keep on a cloth when polishing to prevent scratches
what substance can i use when i don't have B-Cut Super? please answer
@@AssassinForPeace can also use compound used for polishing cars
itna to honda ki bhi polish nhi hogi nice bro
lot of work, good results looks better than new
Nice work! Amazing!
Superb Bro
Nice quick work...!
joss beledoss mas..bro..salam sukses
Cant wait to see the frame restoration
o que eu possa me dar uma olhada na sua conta e não sei se o problema não está mais em casa eu vejo o
Bellissimo... gran bel lavoro bravissimi 👍👍👍👍👍
Amazing Bro
මෙක නම් එලමයි🖤
What kind of solvent are you using with the toothbrush clean up old oil. Is it diesel fuel?
Very nice work. Thanks for sharing.
I guess that is kerosene
Petrol
Where can buy the b- cut super polish this product from 🇮🇳 india or sales only in India
Very nice sir
You should use white 100% cotton terry cloths. Those paper towels are scratching it. Looks good for sure but in the right sun light the clarity won’t be completely there
Nice job broooo👌
What type of material is used for making this product clean
Might be the most efficient way I've seen.
Very good !
proud to be Sri Lankan !
Thank you brother
Es necesario cleat coat o lo puedo dejar sin aplicar?
Amazing! Congratulations! You are an artist!
what substance can i use when i don't have B-Cut Super? please answer
Saludos desde medellin Colombia
You use 320 and 600 grit paper on this project and 220/400 on other ones then move to felt buffing wheel on grinder and remove the scratches. I would like to know about that polish because when I do it the sand marks are very difficult to get off and I used 800 to get oxidation off followed by felt pad on grinder with Blue Magic (which is supposed to be a “B Cut” polish. What am I missing?
Baie mooi gedoen
Excellent 💥💥
Very good
Wah yr Bhai 👌👌👌
awesome job
That made in Japan , thats inner making shine too worth watching
Quiero saber como se llama el producto blanco para aplicarlo y hacer este trabajo gracias
Is B CUT an aggressive cutting compound?
Serviço de ótima qualidade parabéns
Agora queria saber qual é essa boina aí e essa cera
Beautiful work
I am new to buffing. Can I have the list of equipment you used, pls?
Sir clear coat mein kya dalte ho
Nice job...Amazeing transformation on that side cover...
Autosol cream also can use?
Ye konsa chemical use kia white colour ka our os sey phli kia use kia tha
Muito lindo ,ótimo trabalho
Hi, please tell me the name of the liquid you use to make it clear and what the liquid is. Thank you.
What is the name of crome pasta?and how much is it my brother?how to order my brother??
Excelente 😮
How long will the buffering last
Amazing 👍
Doesn’t the clear coat just peel off with the heat of the motor?
Hey what kind of clear coat do you use for that?
Wow nice....
This is sick!
Bhai yeh aap order per karte jo ya nhi
nice work. ...
is it work if i’m using Autosol metal polish ?
Hi my good friend, the cartoon was really great, but thank you for telling me what the liquid was that you used to pay. I am from Iran and I do not know what it is. Thank you for telling me what it was !!
After polishing I guess he used clear coat. Just a guess because I have seen many auto painters here in Sri Lanka apply clear coat on chrome parts after polishing.
Zaberdast
What kind of record is he using to shine? And what liquid is the one that applies to it at the end? Thank you
Beautiful 👍👍👍👍❤❤
what substance can i use when i don't have B-Cut Super? please answer
Awsome 👌
Good bro
Verey nice.
Where to get B-Cut super
hello brother what materials do you use to polish
goodjob👍
هذا وصل المنتج هل موجود مصر؟
Parabéns ficou muito bom
Is the clear coat heat resistance?
i also want to know it
Great job!
Perfect work😁😁😁
What did u spray after buffing...???
Clear lacquer 2k
B-cut nya belinya dimana kak..?