This operator is a real poet. Every move made with the G's blade is placing material or gouging it out. Stone or rock always presents challenges to any earthmoving machine. Keeping that blade full = production.
Tebrik ediyorum bu ekibi gerçekten çok güzel zevkli çalışıyor, yaptığınız işin hakkını veriyorsunuz, o makinelerin hakkını veriyorsunuz, aldığınız üçretler ana sütü gibi helal olsun. Temiz iş çıkarıp bunu da çok güzel bir şekilde bize gösteriyorsuz. Çok teşekkür ediyorum elinize emeğinize sağlık.
CAT D7 dozer ile güzel orman yolu açma videosu beğendim güzel olmuş emeğine, yüreğine, bileğine sağlık kolay gelsin koca yürekli ustam benim güzel insan hayırlı haftalar hayırlı pazartesiler
The D7 and D85 Komatsu (my choice) are perfect for this. Less fuel and fast cycle times tell that story. Nice job. I hope it doesn't rain before this is graded and packed. Water and clay make YUCK. Great footage. Retirement sucks eh, LOL. This operator has spent a long time in places like this. Nice and smooth and not getting cocky with the R side of the cut. It is easy enough to do as an inexperienced newbie to have a hair straight back ride down a 1 to 1 slope. I did it just once and was once was enough eh.The slope was a bunch less steep about 1/2 way down.
Hello sir, enjoy your retirement, travel around :) I hope you will always be well. Sometimes one misses the past, but when it comes to the dozer, the d7 is definitely a very serial machine. It is measured for our work, most importantly, there is no malfunction, it ends the day well, your comments are valuable, thank you.
Thank you for posting a great video mate. The rock is getting harder as the road is being cut on this section. It is no problem for the D7g and MST 300 Excavator. The operators keep on cutting through the material at a steady and productive pace. I like it 👍catch you on the next video. 🙂🙂
Havin a grader to tune the road as you are pushing is a real blessing. Few times I had one and of course they sent a lowbed in far too early with a feller buncher that got 1/2 way up and we/he had to unload on the slope. Management like that needs to spend a bunch of time on the jump seat without the option to jump. That usually smartens them up eh. Talented people here today eh. The corner shanks and bits sure take a lot of the work and maintence Them all the others I have change hundreds of them over 40 years.
Hello sir, you are very right, but we have to act in line with the possibilities, dozer and excavator receive heavy maintenance every two seasons, grader works very hard, greetings from Turkey.
@@Greyder_mehmet I live and worked in the Mountains of BC Canada. We are a logging and road building is all part of getting to the wood to market.A was a HD Mechanic and machinist when not out there running all the machines and part time forman responsible for everything. Including dealing with the Forest Service. I am retired now and sure miss those high pressure days. Days would fly right pass us if II let it, LOL.
We serviced equip every 300 hours aside from daily greasing by the operator, Then at 600 hours and at 1000 hours every drop of oil/coolant a machine had stocked up. Most times the 1000 hour was done in the bush but sometimes get done in the shop at home. With 5 full logging shows and our road builders we had 18 log trucks and 5 pieces on every block. add on support trucks full of Hydraulic hoses and crimpers and various other things known to fail we had it all figured out to keep every machine moving@@Greyder_mehmet if the tracks or wheels weren't moving something was wrong somewhere. I sure miss it all.
Selamun aleyküm ve rahmetullahi ve bereketuhu hayırlı akşamlar ustam kolay gelsin hayırlı işler bol ve bereketli kazançlar başarılar dilerim sana ve ekip arkadaşlarına hayırlı geceler
@@Greyder_mehmetaleyna ve aleyküm selam ve rahmetullahi ve bereketuhu hayırlı akşamlar ustam kolay gelsin hayırlı işler bol ve bereketli kazançlar başarılar dilerim sana ve ekip arkadaşlarına hayırlı geceler
Maestro buldozero, voy a dar mi humilde opinion, el sobre acarreo de naterial te está consumiendo mucho combustible, solo balconea tu material unos 10 metros, te quita mucho tiempo ir y venir acarreando tu materia, el otro punto es porqué no perfilas tu talud? No creo valla al 1x1, minimo debe tener una inclinacion del 1 al 1/4, otra observacion, porqué no subes 2 zancos para que con solo uno trabajes? Esta hermoso el 7 pero con los 3 zancos estas forzando mucho al motor, saludos desde Puebla, Mexico
Primero que nada amigo, muchas gracias por tus comentarios y sugerencias, creo que entiendo lo que quieres decir, se lo reenviaré al operador, con cariño desde Turquía.
kjo ashte jeta jeme pse nuk i frigona askujte. ka jetu neper male kam punu. tan diten. po njers kam fitu jo me drog. jo teorizum. jo me rrena. dallivere. sheh thojna muslimanet. hallall
yine güzel bir video izliyoruz..🎉🎉Teşekkürler....👋👋
teşekkür ederim 🤝
I can feel the oxygen from here, nice work bro
very much thank you baby
Very impressive, super good operator.
Thank you my friend, I'm glad you like it, I wish you a good time.
Super good operator u.must be American@@Greyder_mehmet
This operator is a real poet. Every move made with the G's blade is placing material or gouging it out. Stone or rock always presents challenges to any earthmoving machine. Keeping that blade full = production.
Hello sir, thank you for your comments. We are doing our best, greetings my friend
Good to go
Hard carve
Dirt moving isn't anything new. What it's about is how you do it you work hard for the bosses that you know are smart that makes a shine in God's eye
Tebrik ediyorum bu ekibi gerçekten çok güzel zevkli çalışıyor, yaptığınız işin hakkını veriyorsunuz, o makinelerin hakkını veriyorsunuz, aldığınız üçretler ana sütü gibi helal olsun. Temiz iş çıkarıp bunu da çok güzel bir şekilde bize gösteriyorsuz. Çok teşekkür ediyorum elinize emeğinize sağlık.
abi güzel yorumlariniz bende size teşekkür ederim, elimizden geleni yapmaya gayret gösteriyoruz, kendine iyi bak selamlar 👋🤝
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
👌
CAT D7 dozer ile güzel orman yolu açma videosu beğendim güzel olmuş emeğine, yüreğine, bileğine sağlık kolay gelsin koca yürekli ustam benim güzel insan hayırlı haftalar hayırlı pazartesiler
merhaba kardeşim selamlar 👋👋
@@Greyder_mehmetmerhaba ustam kolay gelsin hayırlı işler
The D7 and D85 Komatsu (my choice) are perfect for this. Less fuel and fast cycle times tell that story. Nice job. I hope it doesn't rain before this is graded and packed. Water and clay make YUCK. Great footage. Retirement sucks eh, LOL. This operator has spent a long time in places like this. Nice and smooth and not getting cocky with the R side of the cut. It is easy enough to do as an inexperienced newbie to have a hair straight back ride down a 1 to 1 slope. I did it just once and was once was enough eh.The slope was a bunch less steep about 1/2 way down.
Hello sir, enjoy your retirement, travel around :) I hope you will always be well. Sometimes one misses the past, but when it comes to the dozer, the d7 is definitely a very serial machine. It is measured for our work, most importantly, there is no malfunction, it ends the day well, your comments are valuable, thank you.
Railroad rhino
Make a good girdle fitter
Beautiful old dozer - 20 tons and 200 horse power
Yes sir, you have the information, that's great.
Thank you for posting a great video mate. The rock is getting harder as the road is being cut on this section. It is no problem for the D7g and MST 300 Excavator. The operators keep on cutting through the material at a steady and productive pace. I like it 👍catch you on the next video. 🙂🙂
Yes sir, thank you for your compliments on their behalf, everyone knows what to do, there are no problems, love from Turkey.
Wow! That is absolutely incredible!
thank you brother 👋🤝
I'd like to see where those rocks end up sometime ?
🇮🇱💋👍👌❤️🇮🇱
😊🤝🖐️
Another great video Mehmet! I watch these on a 70" 4k tv and it feels like I am there with you.
Hello friend, I'm very glad you liked it, I hope you enjoy it even more, all my effort is for you to watch it.
Havin a grader to tune the road as you are pushing is a real blessing. Few times I had one and of course they sent a lowbed in far too early with a feller buncher that got 1/2 way up and we/he had to unload on the slope. Management like that needs to spend a bunch of time on the jump seat without the option to jump. That usually smartens them up eh. Talented people here today eh. The corner shanks and bits sure take a lot of the work and maintence Them all the others I have change hundreds of them over 40 years.
Hello sir, you are very right, but we have to act in line with the possibilities, dozer and excavator receive heavy maintenance every two seasons, grader works very hard, greetings from Turkey.
@@Greyder_mehmet I live and worked in the Mountains of BC Canada. We are a logging and road building is all part of getting to the wood to market.A was a HD Mechanic and machinist when not out there running all the machines and part time forman responsible for everything. Including dealing with the Forest Service. I am retired now and sure miss those high pressure days. Days would fly right pass us if II let it, LOL.
We serviced equip every 300 hours aside from daily greasing by the operator, Then at 600 hours and at 1000 hours every drop of oil/coolant a machine had stocked up. Most times the 1000 hour was done in the bush but sometimes get done in the shop at home. With 5 full logging shows and our road builders we had 18 log trucks and 5 pieces on every block. add on support trucks full of Hydraulic hoses and crimpers and various other things known to fail we had it all figured out to keep every machine moving@@Greyder_mehmet if the tracks or wheels weren't moving something was wrong somewhere. I sure miss it all.
Kolay gelsin ustaa🎉
kardeşim teşekkür ederim
Selamun aleyküm ve rahmetullahi ve bereketuhu hayırlı akşamlar ustam kolay gelsin hayırlı işler bol ve bereketli kazançlar başarılar dilerim sana ve ekip arkadaşlarına hayırlı geceler
aleyküm selam kardeşim selamlar iyi geceler
@@Greyder_mehmetaleyna ve aleyküm selam ve rahmetullahi ve bereketuhu hayırlı akşamlar ustam kolay gelsin hayırlı işler bol ve bereketli kazançlar başarılar dilerim sana ve ekip arkadaşlarına hayırlı geceler
Merhaba iyi çalışmalar diliyorum
merhabalar teşekkürler efendim
Profesyonel iş
teşekkürler 🤝
Maestro buldozero, voy a dar mi humilde opinion, el sobre acarreo de naterial te está consumiendo mucho combustible, solo balconea tu material unos 10 metros, te quita mucho tiempo ir y venir acarreando tu materia, el otro punto es porqué no perfilas tu talud? No creo valla al 1x1, minimo debe tener una inclinacion del 1 al 1/4, otra observacion, porqué no subes 2 zancos para que con solo uno trabajes? Esta hermoso el 7 pero con los 3 zancos estas forzando mucho al motor, saludos desde Puebla, Mexico
Primero que nada amigo, muchas gracias por tus comentarios y sugerencias, creo que entiendo lo que quieres decir, se lo reenviaré al operador, con cariño desde Turquía.
That loose smoke stack would bother the HELL out of me!
These are the possibilities, my friend.
This series of caterpillar machine is tested in our logging area way back year 1970 to 1986. It's durable.
hello mate, definitely.. very durable bulldozer..
That's a dazzle
kjo ashte jeta jeme pse nuk i frigona askujte. ka jetu neper male kam punu. tan diten. po njers kam fitu jo me drog. jo teorizum. jo me rrena. dallivere. sheh thojna muslimanet. hallall
Pershendetje zoteri, faleminderit per komentet tuaja, me dashuri nga Turqia kudo qe jetoni.
Lucky it wasn't bigger stuff
Won't even need to gravel the new road. It is self graveling.
Definitely my friend, there won't be any mud in here
Angle blades aren't shuvers
Don't feathers with me
Trying to bend the bucket
Try to what they started
Stays at it
cat ashtr cat. 1
दुनिया में #1 दोस्त
sa jam matlletru nji guri i fort 4. 5. ore me nji ven deri. e e thejmi. patjeter. u lodhmi maksimum. patjeter. rruga. si pas planit.
Po miku im sado i veshtire te jete materiali d7g e ben te drejten pershendetje..
Need some dynamite
I wish, my friend, but its use is prohibited in this area.
give me a 963 with clam any day
I will upload it for you my friend
Your excavator operator is digging off his drivers…taboo or rookie 🙄
Our operator is experienced ))
to much bouncing around
Hello friend, problems may occur from time to time with the image.
not the image, the footage, @@Greyder_mehmet
operatorr. i mire
operator is tired dude
Kolay gelsin ustaa🎉
teşekkürler selamlar 👋