Revell: 1968 Ford Mustang GT 2 in 1 Part 1

Links to the products i use are bellow
I Was not paid to say or do anything. These are my honest opinions uncensored.
Want to support this channel, why not become a patron! And also get your chance at winning one of my finished builds:
www.patreon.com/thescalemodel...
Visit my webshop(for euopean vieuwers: www.thescalemodeler.com
Or my Amazon Shop for US vieuwers:
www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
www.thescalemodeler.com/brand...
My airbrushes and setup:
1BAR(20PSI) of air pressure through the gun.
amzn.to/2xGv8JT
amzn.to/2xHccdW
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
amzn.to/2yp5T25
amzn.to/2J8l1n1
The booth i made myself:
• How To: Build a Spray ...
Zero paints store locator:
www.zero-paints.com/Dealer_Lis...
Grey Primer: www.thescalemodeler.com/produ...
Clear: www.thescalemodeler.com/produ...
Colors: www.thescalemodeler.com/categ...
General Tools: amzn.to/2xGdDOB
Sanding sticks:
amzn.to/2JDydEt
amzn.to/2l1FWOV
Tape:
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
Tape with plastic sheet: amzn.to/2hIy82f
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Cutter: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Clearparts glue: amzn.to/2EQMTyt
CA Gleu: amzn.to/2zb0jhg
Plastic Cement: amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves:amzn.to/2ypuTqd
Tweezer: amzn.to/2hIxj9F
Brushes: amzn.to/2xG77r3
Decals Solutions:
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers: amzn.to/2zptYoa
amzn.to/2z8WREd amzn.to/2zFEgjS
Sanding sponges: amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders: amzn.to/2ypbjtT
Panelline accent color: amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice: amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
Camera Gear:
GoPro: amzn.to/2DDfRgz
Head Strap: amzn.to/2DHiiio
Links
www.thescalemodeler.com/brand...
plamoz.com/
www.scalemotorsport.com/
/ yellowhouseclub
www.uscp-ua.com
Check out Scaled world and get your builds featured!
scaledworld.net/
/ scaledworld
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds,unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at [e-mail]
Also don't forget to like us on Facebook for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by TH-cam Audio Library
&
ampletunes.com/
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

[@andrewdrabble8939]

That green was just screaming 'Bullitt'

[@byrontaylor9235]

I like this color scheme it works better than you would've imagined. Now im a somewhat new subscriber and I've been binge watching your videos jumping around to your videos going from current to much older builds. My comments are new but bare with me I'm still going through them and im loving everyone of them

[@reconranger1370]

I really enjoy your videos and I generally learn something new each time I watch. For example. I've seen you use silver in the past to make the Yellow come out better. I am going to try that with the tips of propellers on WW2 aircraft. They never seem to come out as I want them to. Great video, thanks for sharing!

[@aanas_evo1713]

Amazing work! Love what you do, always satisfying ✊

[@Ranger89212]

love the color scheme 👍👍👍

[@jerryjohnsonii4181]

Great choice on the color Sir

[@AppleGeniusInc]

I took this exact kit and made a Bullitt replica with it

[@the_bmx_tim2815]

I did a mad max style build with this chassis and the body of a 1994 Civic. It was interesting. 😂

[@andrewdrabble8939]

I bought the Bullitt themed kit just to find out this particular 2 in 1 kit has all the parts to produce one. Had to buy one because the paint wouldn't adhere to the body of the Bullitt properly and got ruined

[@BibleStudyReview]

That is 3000 grit, not 300 grit as it says in the description...unless you want to remove the primer you just put on. 😆.
PS: love all the videos!

[@glb1948]

can you tell me what brush that you use on detailing your dashboards...interiors..etc...

[@liorof]

That color scheme is great!!!

[@chancekoehler7578]

@TheScaleModelingChannel
So you do put together models that people send you?

[@ggj1987]

I’m going to take a wild guess and say the 3rd car is a Shelby Cobra

[@christopher.m.estelow]

What's the easiest way to sand the mold lines away from the windshield pillars because it's such a thin space to get something in there?

[@lucascornet553]

Hello, i want to know why do you do this line withe the black maker and after you sanding? Thanks!

[@thehughfarffchannel5499]

Would love to see you work on a foxbody!

[@Dillusionz]

I am looking for some vintage model kit. Do you have any favourite to recommand.

[@19Dejo81]

Hi Tom,when you sand down body before primer,do you wash it in some detergent etc. or you just blow dust with airbrush?

[@TheScalemodelingChannel]

Just blow it off and brush it out of the tight areas

[@Matt19Videos]

Hello Again just wondering how you deal with old tamiya decals if you already encountered that. Im still Making The Mini and The Decals are old. Im wondering What should i do so it could not break. (Can You Make A Video Abt this?)

[@oldmancrow6676]

Do you or have you in the past ever done body paint with rattle cans? If not would you be willing to paint a body build with rattle cans? I do love your airbrush skills and wish I had those same skills myself. This Mustang looks amazing. You do fantastic work brother.

[@TheScalemodelingChannel]

I have. multiple videos have been made and posted on the channel

[@oldmancrow6676]

I’ll look them up. Thank you for the response.

[@dallasdandigitalproduction393]

Beautiful Mustang. Whats the device called that you use to hold the body as you paint? Thx

[@TheScalemodelingChannel]

Tamiya paint stand. Link is in the description

[@josephstanczak4340]

Can you explain the use of the fine line tape to outline the 10mm tape you already laid down? What does that accomplish? Really learning a lot from your vids (subscriber) - excellent quality.

[@TheScalemodelingChannel]

Its easier to stick down on the sharper edges then a wide piece

[@BibleStudyReview]

With the Zero paints, is there any cleaning of the needle between coats because of drying?

[@TheScalemodelingChannel]

Nope

[@DavidMarzola]

Great video. Can you amplify what is a mold line is and how you recognize it? Hard to see on the video.

[@TheScalemodelingChannel]

Mould lines are lines left behind from the moulding proces when the kit is made, this is a line where to mould halves meet. This is a line that sticks out on top of parts where no lines are supposed to be, they are in different places on every different kit.

[@DavidMarzola]

@@TheScalemodelingChannel Thank you

[@DavidMarzola]

@@TheScalemodelingChannel I have been modeling for years doing aircraft this is my first introduction to doing cars. I understand about the mold lines, but what I don’t know is how to recognize mold line from what is supposed to be on the car body. Sorry for the dumb question. Do enjoy videos. Easy to follow and give info for a beginner car molder.

[@NeonsStyleHD]

Can't believe you've not done a motorcycle. Could you do one please?

[@jamesedward4283]

Vidoes are awesome and great tips, but I do have one question, im crutly working on a 69 dodge charger r/t painted B5 blue with a white hard top, but im have a tough decision on what interior color i should do, so question is how do you chose interior color?

[@TheScalemodelingChannel]

Same way i choose an exterior color, i look at what i like

[@jamesedward4283]

@@TheScalemodelingChannel alright thank you

[@jimoray]

Do you clean the airbrush for every paint coat?

[@TheScalemodelingChannel]

No. Just inbetween a color change

[@sunbeamtiger6722]

Dear Tom,
I am currently building a Revell 1969 Ford Boss 302 Mustang.
The outside color of the body is yellow/orange. Inside roof is black and engine bay is black as well.
What is the best sequence to spray it? Inside first? Or outside and then masking for spraying the engine bay.
Alternatively I could go with a brush for the engine bay.
Do you have a recommendation?

[@TheScalemodelingChannel]

outside and then masking for spraying the engine bay

[@sunbeamtiger6722]

Thank you for the swift response! Will give it a try now...

[@Toppervision1]

I really like those colors! Lovin' this build. So is the silver base coat just for a yellow, or would it be good for any light color on a dark body? Like white?

[@TheScalemodelingChannel]

For any light color

[@Toppervision1]

@@TheScalemodelingChannel Aha, ok. Thank you.

[@Wesley_C]

It reminds me Bullitt.

[@melted_pistons]

You should build the 1/16 scale mustang model. I don’t know the brand but I had one and I’ve seen them in stores. It’s a different build but a chance to get some really intricate details

[@the_bmx_tim2815]

I think I know the kit you are talking about, those ones are extremely expensive, I seem to only see $450 and up when I see them.

[@melted_pistons]

Timothy Halbrook really? I got one a few years ago for I beleive $50 at a Hobby Lobby. And everyone knows Hobby Lobby is always overpriced