Almost April 2024 and both of my SRs are running Klipper, one with a Sherpa Mini extruder it printed in CF PETG and a .6 Micro swiss high flow. It's the best workhorse out of over a dozen printers I've had on the farm. Its' brother runs PETG all day every day...
@@chrismay2298 wow cool combinations, i just did klipper and spoilt my SR bed😢. Didn’t know delta z-offset is different from Cartesian n bed slingers. Reluctant to go back Marlin. Sherpa good? Bought HGX-lite with nema14 ( might weight down the head ) .I have yet to install on SR as it’s z is not easy to set, looking thru several videos didn’t have detail on the Z-offset setup.
I know it's been 2 years, but I am considering getting one. I have a QQ-S, but it's not what it used to be. Time to upgrade to SR... I have 9 other printers and I like the deltas because the print isn't moving during printing, so delicate parts print well.
possibly why cura didn't catch the printing limits is that it records the printable area as a cylinder but a delta printer's area is more of a cone. A decent way the built in cura profile could deal with this is to reduce the height by 50mm or so to better reflect this.
Definitely bought this printer based off of this video. Was close to buying the ender 3 s1 but after seeing this printers bed doesn't move, and you're impression of it, seemed like a no brainer! Finishing my 1st iron man helmet and started a Mandolorian and it's been easy to get into this hobby!
So I'm here and I'm alive and I just have to say I like the printer but I have to look into extension bars like you said about the Bill Volume I want something a little taller
Hey, I’m buying a 3d printer soon and I was considering the Eder 3 max. It would be awesome if you relied that printer because your channel is what made me want to go in to 3d printing, your opinion of it would help a lot.
Hi frank! Quick question! As far as buying replacement parts for the flsun. How cheap or accessible is it? Specially compared to an ender? Love love your work!!
Frank. Thank you so much for your content. I want to start a small business for my son in 3D printing and your content is helping me so much. He is on the spectrum and wants to make fidgets for kids. Can you recommend a program to use? I’m totally new at this and want to make the right decision. Thank you Frank.
I’m convinced. Is my first one. My partner and I are starting a small business as a hobby. You mentioned to the 400 upgrade version that’s coming. Thoughts on that? It seems that it will be out very soon. I just watched your other video the top 3 you chose!
@@FranklyReviewed we will get that one. Always wanted to print helmets, castles, and other things! Now I need to get better at painting and learning the how to…
Hi Frank great video but do you think the bed size should be bigger even if the bed is turned so it would be like a diamond so a corner would point out the front then maybe I would buy one
Would you mind sharing, after you level it, do you have to play with the Z axis at the start of a print? On my CR10S Pro V2, after each levelling adventure, I still have to adjust the Z; always lowering it. I hope a fixed bed would eliminate this issue.
hey Frank, I was wondering if you have shared your support settings for this printer? I keep running into issues where removing supports leaves ugly, "raw" walls behind. Even with removing brims!
I got a flsun qqs and I've been having issues just getting it to print. Can't find any videos on dialing it in and was wondering what settings do you use for the super racer?
Hey Frank looking to buys my 1st printer I was leaning towards the ender3 v2 then I saw this video what would you recommend for a beginner such as myself?
What do you think about this I was wanting to get the flsun400 but it’s on preorder but I can just buy two super racers an get them Amazon prime in one day. For closely the same price what will I benefit more from.
Love your channel! I am looking at starting making cosplay outfits. First I plan to do is a Mando helmet for my fiance. Is this still your choice for best printer or has something else come along? Is the larger V400 worth the price increase?
Properly set up and assuming all parts work as intended a base Ender 3 will make prints just as nice as a prusa printer. You're paying for the name and the promise that all the parts will work, that's it. Everything else is on you to make it work, you just gotta put the time and effort in.
@@FranklyReviewed thank goodness cause its already here and this video had me scared I wasted 200$ if you have one does it work as good as the one in this video?
Alright Frank, since its been about 5 months since this review... from what ive noticed you dont tend to make too many upgrades to your printers. Are there any you would recommend for this one? Ordered it and should be arriving tuesday. Got 5015 fans/printed better exhaust ports, printed better filament roller, and will be getting a better filament tube. Aside from these are there any upgrades you could see getting for the super racer?
We have had extensive conversations. You know the problems I have had in the past. Does this company have a customer service representation line that can be reached in an actual human being be talked to? In case of malfunction. Is this one that you would think I could use? Do you give this your sign of approval?
This video wasn’t sponsored or paid. They sent me this printer to test and review honestly and openly so that’s what I did. I’d you have had an alternative experience with it, feel free to share in a comment or make your own TH-cam video about it
Unrelated to 3d printing but I love your positive attitude and energy, really something to aspire to. Just got into 3d printing a few weeks ago and I've been having the best time, your content really helped me get into it!
Agreed, I just got a SR. Highly recommended as S1& T1 coming u might have a good deal of old stock. No complicated structures like corexy or belt routing with lots of mechanical parts here n there. Yes reliable, Start print & go to sleep. Only it will be even be better with a direct drive out of the box. Thanks for sharing bro ❤. Also wish to see if u will Include klipper o direct drive to it soon.
Tbh I'm a beginner in 3D printing and I was about to buy the Ender 3 S1, but after looking around about the FLSUN... I'm super tempted to buy it above all the rest XD I still have time, but I will definitely keep this one in mind
I have this printer, it's OK, phenomenal No but I'm not sure any 3d printer out there is. The advantage of this printer in one look is roller bearings over plastic rollers but that will be seen over time as not all bearing material is equal. Lubrication is a must and not well documented. Probably best to pull the WO horsey bit on the touch pad and bridle it back a bit for the the best results. They are on the correct course with slide bearings but for the low cost of 608 or similar type bearing I'm not sure what any of these manufactures are waiting for. An excellent 608 or better on a flat track. They are all still selling either defeat or high maintenance. In this hobby/trade to many have become accustomed to mods, they really need to start selling printers that work as well or better then a paper printers. They don't and they need to be that good for the price. A color laser for this price does much more and is quite accurate through it life expectancy. Just some thoughts. hp tech.
Just bought this printer. Assembled it. Ran 3 test prints flawlessly and beautifully I might add. However , after removing the sd card and working with Cura on the pc I sliced a small program to try and when I went back to the printer it no longer saw my sd card. Oddly while in the print menu showing everything blank as if it had no card , I pushed the sd card to eject it and it suddenly showed the card files. I pushed it back in and it allowed me to load a program but just froze forever. I tried a new sd card. Same exact issue. You could see the files but only if you ejected the card. It also froze during another leveling attempt. I’ve slated it for return today and I want to give this another try so I’ll get another whenever I get refunded. Have you ever heard of this or had this issue ? Also the USB port seemed dead. Never lit up any thumb drive lights nor saw anything on them. I tried multiple sd cards and thumb drives. Nothing.
I got one and put and assembled it but when i do the test print (the nut and bolt) the print just slips off and i dont know what to do and i auto leveled.
I was having the same problem and I solved it by flipping the bed over to the smooth glass side. I couldn't get anything to stick to the textured side but the smooth side has been working great for me.
I also clean the bed with a water & vinegar mix. About 1/3 vinegar, 2/3 water with 1 drop of dishwashing liquid. (old glass cleaning trick) For PLA I go about 55 to 60 degrees preheat and it should stick.
Thankyou for your video I have been wanting to get into 3d Printing for awhile just never sure which printer to get and after watching this video i bought This Printer so thankyou again
I want to build armor and helmets. Has anyone done that with this printer? If so, did it work? In the video je said it may work I wanna make sure it does before I buy it cause it looks so cool
Just started using this as my first printer and it's amazing, do i need to turn it off every time i finish the print to cool down the bed or is there another option? Thanks in advance!
There are no best settings. Every printer is different, then you have countless different filaments and you need to print models differently. Don’t go into the hobby thinking there’s one solution for everything. It takes time to learn
As always I love how honest you are with everything and also the fact that we are both working on making Tengen's swords. If you're ever up for the challenge of making sephiroths sword that's like 7 1/2 feet long tell me😅I got the files
Full Helmet capable ? Can't seem to get a clear answer in the FB groups. Typically print 23 inch helmets. Mostly Red Hood sized but Mando sized would be cool. Want to know for certain before I pull the trigger.
@@FranklyReviewed Looking forward to your review I was tempted to grab one from presale. If it can reduce the time as significantly for a full helmet that'll be wildly impressive.
Does this printer have a good repairability? it seems like the kind of printer that is really hard to repair once something breaks down (due to how weird it looks). And how would you compare it's precission to CR10 and ender 3 S1? I really loved the reliability aspect of this printer, and i'm aware creality printers are not very reliable. so if the precission on this one is higher i might go for this one. i'd love to hear your thoughts on this.
@@FranklyReviewed wow thanks for responding!! If you see this, i think an interesting topic for a video series is tier listing all the printers you have used on a accuracy tier list, reliability tierlist, speed tierlist....(etc). Specially with christmas coming some people might want a 3D printer, and those tierlist might be very useful to them (and it's a pretty unexplored topic)
I'm sorry this is off topic but I don't know where else to go. My super racer nozzle scrapes the top of prints and at around 15 CMS it really rams into prints until it rips them off the print bed. It's not a layer adhesion issue because I can hear a sharp crack when it does this and I can't dislodge the prints unless I let the bed cool first. I've increased the z hop to 2 mm, enabled / disabled combing, retraction and also set the extruder to 70 % at which point it is really under extruding, yet it consistently snaps prints. I can't get a response back from flsun. I'd really appreciate any advice or troubleshooting steps.
I’ve bought this one and two of the Sv03 based off of your recommendations but have nothing but issues with the SV03 and print quality issues right out the box with the FL Sun Racer as well. I’ve been printing for a while so it’s not my first rodeo but I think they pay extra attention during their QA process when they send it to a TH-camr with lots of subscribers, not your fault but everyone else is taking a gamble as you never know if you will get a lemon or a printer where you spend more time fixing it then printing with it. I love your content but recommendations are not always true for others if the same care is not taken for others by the manufacturer during their QA process.
I have to say that’s very odd. I do what I can to avoid those fluff printers, and I can see for a fact this one was delivered from an Amazon processing center. I also bought 5/6 of my own SV03s from various suppliers with all the same reliable results. I’m sorry you’ve had this issue with this printer tho, the other people I’ve seen with it have had nearly identical success with it as I have.
@@FranklyReviewed Not your fault and thank you sir. It’s just the name of the game for the lowere end printers, my CR10s printed amazing right off the bat and so did my Zortrax M200 and Affinity 2 but my solidoodle 3, SV03’s and FL Sr just didn’t print great from the get go but I’m just replacing what I can to make it useable.
No lie. To date? Best printer I’ve ever used
What CoreXY printers have you used?
Some Qidi techs, the Sermoon D1, and I think my Flashforge ADV4 is a core XY? I think?
Does this have a built in light too?
Ok, I bit the bullet and got this one to be my first printer. Excited and nervous all at the same time. 😵💫
@@Pr0t0typeSky same. Just brought it in from the car. Don’t know where I’ll put it, once assembled, which probably won’t be this weekend.
Almost April 2024 and both of my SRs are running Klipper, one with a Sherpa Mini extruder it printed in CF PETG and a .6 Micro swiss high flow. It's the best workhorse out of over a dozen printers I've had on the farm. Its' brother runs PETG all day every day...
@@chrismay2298 wow cool combinations, i just did klipper and spoilt my SR bed😢. Didn’t know delta z-offset is different from Cartesian n bed slingers. Reluctant to go back Marlin. Sherpa good? Bought HGX-lite with nema14 ( might weight down the head ) .I have yet to install on SR as it’s z is not easy to set, looking thru several videos didn’t have detail on the Z-offset setup.
I know it's been 2 years, but I am considering getting one. I have a QQ-S, but it's not what it used to be. Time to upgrade to SR...
I have 9 other printers and I like the deltas because the print isn't moving during printing, so delicate parts print well.
You can catch them at microcenter for $250 sometimes now. Got mine on Klipper and a Sherpa Mini direct drive.
@@chrismay2298 No microcenters nearby... I'm thinking ordering direct from FLSUN
First comment Lez go. Luv the vids
possibly why cura didn't catch the printing limits is that it records the printable area as a cylinder but a delta printer's area is more of a cone. A decent way the built in cura profile could deal with this is to reduce the height by 50mm or so to better reflect this.
Looks like I found my next printer. Thanks Frank!
I replayed the ending like 10 times…. 😂😂
Something I have and will always do lol
Worth it
Definitely bought this printer based off of this video. Was close to buying the ender 3 s1 but after seeing this printers bed doesn't move, and you're impression of it, seemed like a no brainer! Finishing my 1st iron man helmet and started a Mandolorian and it's been easy to get into this hobby!
Im curious, were you able to fit the entire mandalorian helmet on it or did you split it in multiple parts?
I would like to know as well. Let us know, thanks.
YES I WANNA KNOW TO
I'm also here for your monthly reminder to finally let us know
Any feedback after 11 months?
So I'm here and I'm alive and I just have to say I like the printer but I have to look into extension bars like you said about the Bill Volume I want something a little taller
Best video ending I've ever seen lol
would this be good for making a buster sword?
I really appreciate your review. We are looking for reviewers, would you like to review Longer's 3D printer & laser engraver?
Hey, I’m buying a 3d printer soon and I was considering the Eder 3 max. It would be awesome if you relied that printer because your channel is what made me want to go in to 3d printing, your opinion of it would help a lot.
Finally found the printer I’m going to get
Hi frank! Quick question! As far as buying replacement parts for the flsun. How cheap or accessible is it? Specially compared to an ender?
Love love your work!!
Frank. Thank you so much for your content. I want to start a small business for my son in 3D printing and your content is helping me so much. He is on the spectrum and wants to make fidgets for kids. Can you recommend a program to use? I’m totally new at this and want to make the right decision. Thank you Frank.
Start on TinkerCAD!
Should I pre order the FLSUN V400 instead?? I was about to get this, But I saw the new one! So i think I'm gonna get the V400.
Have you printed a helmet on this print and do you care to share your experience as compared to the CR you usually use in previous videos
I’m convinced. Is my first one. My partner and I are starting a small business as a hobby. You mentioned to the 400 upgrade version that’s coming. Thoughts on that? It seems that it will be out very soon. I just watched your other video the top 3 you chose!
It’s amazing actually
@@FranklyReviewed we will get that one. Always wanted to print helmets, castles, and other things! Now I need to get better at painting and learning the how to…
@@doc8732what's your opinion on this one after 2 months?
@@damienmoreau3859 LOVE IT
Can we get a Cure profile rundown video for what you are using?
On my main channel I have a video on thah
This printer seems nice but for me personaly a little small. I dont need more than a heigt of 100mm but bases with 300+ for my router forms
Hi frank, first of all love your channel. Great videos.
Do you have a way of configuring the SR in fusion 360? The entire flsun line is not there
Damn wish I would have seen this video like 2 weeks ago before I bought my creality CR-10 V3
Best printer....and BEST BLOOPER EVER LOL!!!!
Hi Frank great video but do you think the bed size should be bigger even if the bed is turned so it would be like a diamond so a corner would point out the front then maybe I would buy one
That would mess with the operation of the l delta style print head. The bed can’t be bigger then the circle path the head can travel
Would you recommend this over the cr10s pro V2?
Would you mind sharing, after you level it, do you have to play with the Z axis at the start of a print? On my CR10S Pro V2, after each levelling adventure, I still have to adjust the Z; always lowering it. I hope a fixed bed would eliminate this issue.
For this printer no I’ve never had to touch it
@@FranklyReviewed that would be wonderful.
hey Frank, I was wondering if you have shared your support settings for this printer? I keep running into issues where removing supports leaves ugly, "raw" walls behind. Even with removing brims!
I got a flsun qqs and I've been having issues just getting it to print. Can't find any videos on dialing it in and was wondering what settings do you use for the super racer?
I’ve just been using the standard Cura profile for mine
Can it do nylon?
Hey Frank looking to buys my 1st printer I was leaning towards the ender3 v2 then I saw this video what would you recommend for a beginner such as myself?
What do you think about this I was wanting to get the flsun400 but it’s on preorder but I can just buy two super racers an get them Amazon prime in one day. For closely the same price what will I benefit more from.
Love your channel! I am looking at starting making cosplay outfits. First I plan to do is a Mando helmet for my fiance. Is this still your choice for best printer or has something else come along? Is the larger V400 worth the price increase?
I have an Ender 3 and am hoping to go up in bed size. Is the bed bigger than an Ender3?
A little bit bigger yesh
But have you used a Prusa? ignoring the price of them of course 0_0
Properly set up and assuming all parts work as intended a base Ender 3 will make prints just as nice as a prusa printer. You're paying for the name and the promise that all the parts will work, that's it. Everything else is on you to make it work, you just gotta put the time and effort in.
I believe you went past be parameters of the printer because it prints in a cone shape and cura doesn't understand that
Would you recommend this over the Creality 3D Printer CR-10S Pro V2 as a first printer?
I wish he had answered that one 😅
So can i print full size helmet?
In pieces yes
@@FranklyReviewed how to split them?
I just got a creality ender 3 I dont know if its a good 3d printer to use or not?
It is!
@@FranklyReviewed thank goodness cause its already here and this video had me scared I wasted 200$ if you have one does it work as good as the one in this video?
Video The Real First 3D Printed Building 1930's
Do you recommend this for beginners?
Yeah I actually do
Alright Frank, since its been about 5 months since this review... from what ive noticed you dont tend to make too many upgrades to your printers. Are there any you would recommend for this one? Ordered it and should be arriving tuesday. Got 5015 fans/printed better exhaust ports, printed better filament roller, and will be getting a better filament tube. Aside from these are there any upgrades you could see getting for the super racer?
Hello! No sir. I run it still stock AF and it’s still kicking ass
Is this still true?
So I want a printer like this but with a biggest platform for around 500$
This or the ender 3 s1/pro for quality prints(smooth prints etc) ?
I bought both. Love them both! The S1 is great. The FLSun SR is so much fun to watch, and the print quality is superb.
@@emilcost8613 If you could only have one, which would you choose?
Hi
We have had extensive conversations.
You know the problems I have had in the past.
Does this company have a customer service representation line that can be reached in an actual human being be talked to?
In case of malfunction.
Is this one that you would think I could use?
Do you give this your sign of approval?
Bro big fan can y buy me one
paid ad
This video wasn’t sponsored or paid. They sent me this printer to test and review honestly and openly so that’s what I did. I’d you have had an alternative experience with it, feel free to share in a comment or make your own TH-cam video about it
Unrelated to 3d printing but I love your positive attitude and energy, really something to aspire to. Just got into 3d printing a few weeks ago and I've been having the best time, your content really helped me get into it!
Well thank you so much
Agreed, I just got a SR. Highly recommended as S1& T1 coming u might have a good deal of old stock. No complicated structures like corexy or belt routing with lots of mechanical parts here n there. Yes reliable, Start print & go to sleep. Only it will be even be better with a direct drive out of the box. Thanks for sharing bro ❤. Also wish to see if u will
Include klipper o direct drive to it soon.
Running Klipper and a Sherpa Mini on mine and it's absolutely killer! Microcenter had them for $250... Score!
Tbh I'm a beginner in 3D printing and I was about to buy the Ender 3 S1, but after looking around about the FLSUN... I'm super tempted to buy it above all the rest XD I still have time, but I will definitely keep this one in mind
Have you tried the newer v400?
I have this printer, it's OK, phenomenal No but I'm not sure any 3d printer out there is. The advantage of this printer in one look is roller bearings over plastic rollers but that will be seen over time as not all bearing material is equal. Lubrication is a must and not well documented. Probably best to pull the WO horsey bit on the touch pad and bridle it back a bit for the the best results. They are on the correct course with slide bearings but for the low cost of 608 or similar type bearing I'm not sure what any of these manufactures are waiting for. An excellent 608 or better on a flat track. They are all still selling either defeat or high maintenance. In this hobby/trade to many have become accustomed to mods, they really need to start selling printers that work as well or better then a paper printers. They don't and they need to be that good for the price. A color laser for this price does much more and is quite accurate through it life expectancy. Just some thoughts. hp tech.
Heya, still sold on this one?
Would you still recommend this printer? I'm going to buy a second printer to start selling going away presents for my squadron
Yep!
Just bought this printer. Assembled it. Ran 3 test prints flawlessly and beautifully I might add. However , after removing the sd card and working with Cura on the pc I sliced a small program to try and when I went back to the printer it no longer saw my sd card. Oddly while in the print menu showing everything blank as if it had no card , I pushed the sd card to eject it and it suddenly showed the card files. I pushed it back in and it allowed me to load a program but just froze forever. I tried a new sd card. Same exact issue. You could see the files but only if you ejected the card.
It also froze during another leveling attempt.
I’ve slated it for return today and I want to give this another try so I’ll get another whenever I get refunded.
Have you ever heard of this or had this issue ?
Also the USB port seemed dead. Never lit up any thumb drive lights nor saw anything on them. I tried multiple sd cards and thumb drives. Nothing.
My cat recognizes your intro
Which filament works best for this printer?
I got one and put and assembled it but when i do the test print (the nut and bolt) the print just slips off and i dont know what to do and i auto leveled.
I was having the same problem and I solved it by flipping the bed over to the smooth glass side.
I couldn't get anything to stick to the textured side but the smooth side has been working great for me.
@@fanofentropy2280 so you unscrew the bed then flip it??
@@Wafflz Yes, just undo the 6 bolts holding the three clamps and flip the bed over.
I also clean the bed with a water & vinegar mix. About 1/3 vinegar, 2/3 water with 1 drop of dishwashing liquid.
(old glass cleaning trick)
For PLA I go about 55 to 60 degrees preheat and it should stick.
@@fanofentropy2280 thank u so much imma try this when i can 👍
Thankyou for your video I have been wanting to get into 3d Printing for awhile just never sure which printer to get and after watching this video i bought This Printer so thankyou again
Your videos are what got me to finally take the plunge on 3d printing and I just ordered this which will make printer number 2. Keep up the good work.
I want to buy this but my bank account says otherwise
I love my Super Racer! Glad you dig it as well!
Is it good for beginners?😶
Yep!
I want to build armor and helmets. Has anyone done that with this printer? If so, did it work? In the video je said it may work I wanna make sure it does before I buy it cause it looks so cool
It’s definitely possible but you just need to get comfortable cutting 3D files up to print
Just started using this as my first printer and it's amazing, do i need to turn it off every time i finish the print to cool down the bed or is there another option? Thanks in advance!
You can let it sit. It auto cools down
What setting do you use . Pls let us know. Like which settings are best overall for printing fine models
There are no best settings. Every printer is different, then you have countless different filaments and you need to print models differently. Don’t go into the hobby thinking there’s one solution for everything. It takes time to learn
As always I love how honest you are with everything and also the fact that we are both working on making Tengen's swords. If you're ever up for the challenge of making sephiroths sword that's like 7 1/2 feet long tell me😅I got the files
Master thy Sword
le me guess...affiliate link?..everything you "review" is just awesome...i get it
That’s very much not true in multiple aspects lol 😆
Now I want one of these even more! Great breakdown! Does Cura have a profile for this printer or do you have to modify another printer’s profile?
Yep! It’s in Cura
Full Helmet capable ? Can't seem to get a clear answer in the FB groups. Typically print 23 inch helmets. Mostly Red Hood sized but Mando sized would be cool. Want to know for certain before I pull the trigger.
Ehhhhh it’s maybe just a TADDDDD to small. But the new V400 I just got 100% can do full helmets
@@FranklyReviewed Looking forward to your review I was tempted to grab one from presale. If it can reduce the time as significantly for a full helmet that'll be wildly impressive.
Does this printer have a good repairability? it seems like the kind of printer that is really hard to repair once something breaks down (due to how weird it looks).
And how would you compare it's precission to CR10 and ender 3 S1?
I really loved the reliability aspect of this printer, and i'm aware creality printers are not very reliable. so if the precission on this one is higher i might go for this one.
i'd love to hear your thoughts on this.
It may be slightly more complicated to repair but still not that hard. Standard nuts and bolts and all the same parts of other printers
@@FranklyReviewed wow thanks for responding!! If you see this, i think an interesting topic for a video series is tier listing all the printers you have used on a accuracy tier list, reliability tierlist, speed tierlist....(etc). Specially with christmas coming some people might want a 3D printer, and those tierlist might be very useful to them (and it's a pretty unexplored topic)
Would you recommend FLSUN or the fokoos odin-5? I've watched both of your reviews and love the break down on them.
The FLSUN honestly
@@FranklyReviewed Thank you Franky! Hope too me you at a Con one day.
I see a bunch of videos recommending octoprint and klipper on a raspberry pi, for this printer, is this something you recommend?
I don’t really use either so I’m not sure. I prefer SD cards
@@FranklyReviewed as always, thank you, I’ll hold off on them for now. Maybe, I’ll look into them after my 100th benchy
If I'm looking to grab a printer as a beginner for stuff like helmets and props should I go with the SV03, CR10s Pro V2 or this?
I would do the pro v2
@@FranklyReviewed any extra upgrades you'd recommend for the pro v2? Also what about CR10s Pro V2 vs the Ender 5 Plus?
Did you get the ender 3 v2? I can tell you some upgrades I did, but learn your printer first then start upgrading
I'm sorry this is off topic but I don't know where else to go. My super racer nozzle scrapes the top of prints and at around 15 CMS it really rams into prints until it rips them off the print bed. It's not a layer adhesion issue because I can hear a sharp crack when it does this and I can't dislodge the prints unless I let the bed cool first.
I've increased the z hop to 2 mm, enabled / disabled combing, retraction and also set the extruder to 70 % at which point it is really under extruding, yet it consistently snaps prints. I can't get a response back from flsun. I'd really appreciate any advice or troubleshooting steps.
would you recommend this over the cr-10s pro v2?
Honestly? I’m not sure. They’re both amazing
@@FranklyReviewedand if you could get only one between the CR-10s V2 and the Flsun V400?
I’ve bought this one and two of the Sv03 based off of your recommendations but have nothing but issues with the SV03 and print quality issues right out the box with the FL Sun Racer as well. I’ve been printing for a while so it’s not my first rodeo but I think they pay extra attention during their QA process when they send it to a TH-camr with lots of subscribers, not your fault but everyone else is taking a gamble as you never know if you will get a lemon or a printer where you spend more time fixing it then printing with it. I love your content but recommendations are not always true for others if the same care is not taken for others by the manufacturer during their QA process.
I have to say that’s very odd. I do what I can to avoid those fluff printers, and I can see for a fact this one was delivered from an Amazon processing center. I also bought 5/6 of my own SV03s from various suppliers with all the same reliable results. I’m sorry you’ve had this issue with this printer tho, the other people I’ve seen with it have had nearly identical success with it as I have.
@@FranklyReviewed Not your fault and thank you sir. It’s just the name of the game for the lowere end printers, my CR10s printed amazing right off the bat and so did my Zortrax M200 and Affinity 2 but my solidoodle 3, SV03’s and FL Sr just didn’t print great from the get go but I’m just replacing what I can to make it useable.
Print a better spool 🧵
First
Cap
Dude the price of these are gonna skyrocket now
Probably lol
How long do you think it would take to print a full mando helmet with this printer at good quality?
Probably 40-ish hours
@@FranklyReviewed thank you, love your content