You sir are a legend when it comes to restoring speakers and subs. Nothing but huge love and respect for what you're doing. So please keep up the awesome work and I promise to keep coming back for more and sharing your video's with as many people as I possibly can because you definitely deserve it.👊😲👍
Excellent restoration of the bass loudspeaker box. The only thing I would do is clean the solder contacts, then run the wires from the other side of the motherboard through those tiny holes and solder them directly to the PCB that way. I have done this a few times on toys made in China that had the wires soldered in the way you soldered them to at 23:59. Wires the way you soldered them are prone to breaking and bending. The way I soldered them, the wires were less than twice as prone to breaking and bending. As for painting, I would use a spray because it covers a larger area and has fewer streaks than painting with a roller or brush. The painted area with a spray is smoother. Otherwise, the restoration was wonderful. Kudos to you on this.
What a wonderful work! 👏👍 But please notice that, some rust and the Yamaha logo need to paint. The new controller cap is nice, but i would like the original controller cap, Should be back on.
Fa váz része kívülről szép meg minden, csak nem igazán tartós, (papám asztalos volt, sok bútort restaurált), elektronikai része is gányolás, jobb kialakítása is lehetett volna. Kételyes az egész vagy szét fog hullani vagy az le fog füstölni.
@@jr-dance2841 Si te refieres a las planas que no van conectadas a nada, Son Woofers pasivos, usan la presion del subwoofer para otorgar mas definicion al sonido, Es por ese motivo que la caja no tiene salida de aire.
интересно, ему хоть кто-нибудь сказал что резиновые кольца одеваются на пассивки, также как на голову, а не сверху накладываются). он ведь увидел в какойто момент, что так не должно быть))
Interesting dual passive radiator design - makes the box as small as possible while tuned very low at the expense of some efficiency and a steeper roll-off on the very bottom of the response - but the benefit is that it sounds a lot bigger than it is.
A similar design approach was used by Carver in making the True Subwoofer. Very small footprint, but it pumped out massive amounts of bass. An engineering marvel in it's time.
From the old case, try to remove the paper with the label with a hairdryer, cut it out and stick it on the new case. It was necessary for you to use putty before painting to fill in the defects of the hull blank.
Hi @Mr.Electricity, nice work. What is that material you smear onto the surface after 11:03 ? Not everywhere, just so. Some kind of resin maybe ? (You burnish that later too with the whole surface). Is it for filling very small holes and uneven points maybe ?
Loved it. But the main driver, passive radiators, and the side panel could have been cleaned better.
Excelent Renovation CONGRATULATION You are a Profesional gretens from 🇨🇦
Like 59 👍 video
22k
23k
Hi, I'm your big fan, I'm from Indonesia, I'm very happy to see your restoration content, it's very good
Primera vez que veo unos radiales de ese tipo.
Transformador toroidal, sub Woofer de excelente calidad.
Yamaha tiene mucha calidad
You sir are a legend when it comes to restoring speakers and subs. Nothing but huge love and respect for what you're doing. So please keep up the awesome work and I promise to keep coming back for more and sharing your video's with as many people as I possibly can because you definitely deserve it.👊😲👍
Very good restoration 👍👍👍Thanks for sharing
You restored this YAMAHA's woofer beautifully just like the original, but you missed the brand logo...!
จข
Subwoofer**
Jag
Классный сабвуфер получился. Респект.
не разу он не классный, 18:47 посмотри на резинки пассивных излучателей. Все кривые косые перетянул он их уж очень сильно.
@@torty7737 😀 бывает
Максим, сколько лет?
@@МихаилВелоСаба 35
Новая плата отвалится через час от вибрации.
Excellent restoration of the bass loudspeaker box. The only thing I would do is clean the solder contacts, then run the wires from the other side of the motherboard through those tiny holes and solder them directly to the PCB that way. I have done this a few times on toys made in China that had the wires soldered in the way you soldered them to at 23:59. Wires the way you soldered them are prone to breaking and bending. The way I soldered them, the wires were less than twice as prone to breaking and bending. As for painting, I would use a spray because it covers a larger area and has fewer streaks than painting with a roller or brush. The painted area with a spray is smoother. Otherwise, the restoration was wonderful. Kudos to you on this.
Wow very good👍👍
*Паяльник жесть! Таким только в 90-х пытали в задний проход походу)*
Нечего ты не понимаешь в колхозе и бракоделии
Excellent restoration, as always. the only thing missing is that you would have placed the Yamaha brand in front of it, but it turned out great
It wasn't a genuine Yamaha to begin with though, as evidenced by the logos not being accurate. 🙂
Ok
Like make a new one..very beautiful…superb work….
wow who knew something could be restored as well as that shows we all can save the world bit by bit and put the time in to repair/restore something
Awesome. สุดยอดมากครับ จาก ไทยแลนด์
Wow you. Like video
Damn satisfying 👌🏼🔥❤️
❤️ From Bangladesh 🇧🇩
What a wonderful work! 👏👍 But please notice that, some rust and the Yamaha logo need to paint. The new controller cap is nice, but i would like the original controller cap, Should be back on.
Excellent skills displayed. This took a lot of effort and it came out nicely. That plate amp has a huge transfomer.
Very nice 👍 video. Like
This is like asmr it’s beautiful sounds
Thats a real restoration vedio
Ang sarap panoorin yung mga ganito...
Жидкий бас, радует глаз!
Bravi ben riuscito cassa amplificata 👍👍👍👍👍👍
அருமையான வேலை திறன்
good...... kreatif 👍👍👍
Хорошая работа.
Oh don’t I just love Yamaha there one of my first favorites
Igazán szép, és lenyűgöző munka.
Fa váz része kívülről szép meg minden, csak nem igazán tartós, (papám asztalos volt, sok bútort restaurált), elektronikai része is gányolás, jobb kialakítása is lehetett volna.
Kételyes az egész vagy szét fog hullani vagy az le fog füstölni.
Harika bir video olmuş 👍
Bien hecho, restauracion detallada y de calidad. Felicidades...
Great Job! 👍
đỉnh đó anh zai
Muito bom o trabalho da caixa !, mas o subwoofer e os radiadores mereciam uma reforma também 👍🏼
Las medidas? Me gustaria hacerlo se ha de escuchar muy bien ...buen trabajo mucha dedicacion y amor en esto del audio...
good job sir , I like your Table Saw good idea
great restore, but should have put a flat ring over the pasive membranes, that way they would stay 100% flat to the box surface
You great 👍
Cảm ơn bắc chia sẻ
cara não criticando seu trabalho isso tá lindo vc e uma lenda mais acho que os radiadores tanbem mereciam uma reforma
Wow so talented. You got game!
Good 👍
Thanks to share.
молодец хорошая работа🙂
Bien hecho, restauracion detallada y de calidad. Felicidades
Disculpa que función tiene las otras cornetas?
@@jr-dance2841 Si te refieres a las planas que no van conectadas a nada, Son Woofers pasivos, usan la presion del subwoofer para otorgar mas definicion al sonido, Es por ese motivo que la caja no tiene salida de aire.
Супер,моё любимое оформление для саба у меня тоже Саб с двумя пассивными излучателями на мой слух лучший бас от такого оформления.
интересно, ему хоть кто-нибудь сказал что резиновые кольца одеваются на пассивки, также как на голову, а не сверху накладываются). он ведь увидел в какойто момент, что так не должно быть))
Interesting dual passive radiator design - makes the box as small as possible while tuned very low at the expense of some efficiency and a steeper roll-off on the very bottom of the response - but the benefit is that it sounds a lot bigger than it is.
A similar design approach was used by Carver in making the True Subwoofer. Very small footprint, but it pumped out massive amounts of bass. An engineering marvel in it's time.
@@MeTuLHeD velodyne microvee
@@dwade3fly7 The Microvee drops off quite steeply below 40hz...making it more of a midwoofer than a subwoofer.
It has been a while, since I had seen a passive radiator.!
Great job mate, well done !!!
Amazing sub
Creative video, like it, thanks for sharing :)
1st comment
👏👏👏👏👏👏👏👏👏👏👏👏🤩😍👍 I love these type of subwoofer boxes very much
This is so satisfying
well done ....😀
Excellent job
It looks like it has a beastly sound and bass, good job
Nice!🤯🤯💯💯♥️♥️
Great work 👍
Looks awesome
The plate amp was uh.... Doing just fine lol
Great job though. Really really good box
Que satisfação ver um vídeo desse ♥♥♥
God job👍🙏🇮🇩
Good job .. looks perfect
music :- lets get naked
speaker :- got dressed 😂✌👌👍
From the old case, try to remove the paper with the label with a hairdryer, cut it out and stick it on the new case.
It was necessary for you to use putty before painting to fill in the defects of the hull blank.
Very good
Good job
Good for bass 👍
Awesome bro
Bom dia excelente trabalho perfeito
س٢س٢٢ي٢٢ئ٢٢٢ؤصس٢ئ٢٢٢٢٢ؤ٢ي٢ي٢٢
ؤ٢ؤ٢٢
Nice job .
Really appreciate the work
It sound good nice bass
svaka ti cast druze
Got to love a passive radiator sub
crazy man....
What happened to the output transistors from the heatsink prior to removal?
Wow very good😘
Good wark
Hi @Mr.Electricity, nice work. What is that material you smear onto the surface after 11:03 ? Not everywhere, just so. Some kind of resin maybe ? (You burnish that later too with the whole surface). Is it for filling very small holes and uneven points maybe ?
It’s for insulation
It's red insulation varnish
Хорошая работа Олег
Wow, that Rare subwoofer Yamaha
Es emocionante ver que un artefacto que no servia se trasforme en nuevo
Good
Good ✨✨✨👍👍❤️❤️
Loooklike restoration i want you for make and upgrade my microlab woofer
Superb
Yamaha masih ngeluarin gk ya produk kaya gini
What Model/Year is this? Is it for Hi-Fi or for studio? Thanks!
nice work :)
congrats !!!! can i ask what is the yellow filler called ??? u use a lot
What paint do they use? It's very beautiful
Провода нужно обмотать противоскрипной лентой, а заднюю крышку сажать на прокладку.
Very nice
Muito bom, mas depois de tanto trabalho tinha tb limpo os cones e surround do driver activo e dos radiadores passivos .
Nice
Restauracion de los parlantes de mr.electricity
Bravooo olé olé olé