Test Salt Water Levels and How to Adjust Salt Level in Pool 3 ways

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ม.ค. 2025

ความคิดเห็น •

  • @caddyzig
    @caddyzig ปีที่แล้ว +1

    Glad you passed the bicep hardness test! 😂

  • @jessec377
    @jessec377 7 หลายเดือนก่อน +1

    Is there a reason to not just take the reading straight from the pool?

  • @jefferymcknight1166
    @jefferymcknight1166 9 หลายเดือนก่อน +1

    Thanks so much. Love the video. I agree with your logic of using a digital meter, but having the more costly test strips as a back-up if the reading from the digital meter is questionable. QUESTION: When using test strips, do I need to fully submerged the test strip in the pool water container? You mentioned during the video that you only put about an inch of pool water in the test container.

  • @jefferymcknight1166
    @jefferymcknight1166 9 หลายเดือนก่อน +1

    Thanks so much. Loved the video. And I agree with your logic of using a digital meter, but having the test strips as a back up, should the digital meter reading be questionable. I am going to purchase a digital meter. QUESTION: Should your digital meter begin to read incorrectly, does your meter allow you to do a calibration with a standardized calibration fluid?
    QUESTION: Does the test strip need to be fully submerged in pool water in the sample container? You mentioned in the video that you had about an inch of water in your test container this would not allow the test strip to be fully submerged.

    • @FamilyDIYtv
      @FamilyDIYtv  9 หลายเดือนก่อน +1

      think it only needs to be in a small amount of water, it should have amount on side of tester ! thanks for comment !

  • @christis1975a
    @christis1975a 8 หลายเดือนก่อน

    Hmm I add a lot chlorine in my pool due winter I didn't care a lot and I had off my salt system and my meter from 3000 went to 4000ppm is it normal chlorine to rise salt levels ?

  • @raveytzib2055
    @raveytzib2055 10 หลายเดือนก่อน +1

    Can test salt water with regular chlorine tester

    • @FamilyDIYtv
      @FamilyDIYtv  10 หลายเดือนก่อน

      really how ? i need to know !

    • @raveytzib2055
      @raveytzib2055 10 หลายเดือนก่อน

      @FamilyDIYtv it was a question forgot the ?

    • @FamilyDIYtv
      @FamilyDIYtv  10 หลายเดือนก่อน +1

      @@raveytzib2055 ha - I don’t know of a way to. If you find out - share !

  • @markwisner3972
    @markwisner3972 6 หลายเดือนก่อน

    My Hayward cell shows what it thinks is the current salt value on the app. It is never really accurate. It is usually high by 150 to 200 PPM. I have the electronic meter, and it is right on. I verify it at the local pool store, which tests water for free. The electronic meter is always close to the pool companies test.
    To add salt, I put it into my leaf rake/skimmer and hang it in front of a jet. Come back in 10 minutes, the salt is dissolved and the only thing left in the leaf skimmer is crud that was mixed in the salt that is not salt, like small rocks or sea shell fragments. My guess, that may be the source of the calcium that clogs up the salt cell.

  • @vickybaby40
    @vickybaby40 8 หลายเดือนก่อน

    Thank you! Bought meter - Appreciate your help so much!

  • @awc723
    @awc723 5 หลายเดือนก่อน

    for $25 just buy a new digital ever 1-2 years...