Nice video,but my qx7 don't have the D8 option,can it be changed? Or it has something to do with the version of the transmitter? Thanks,have 5 receivers now that ai can't Bind..i only have D16,LR12 and OFF.. :(
Hola , estuve viendo tu video y vi en una parte que decis que se puede desconectar la telemetria , yo compre la Taranis Qx7 para usarla con un receptor Delta 8 en un helicoptero viejito un KDS 450 electrico pero esta practicamente sin uso . Lo unico que tiene este modelo es servos , giroscopo , motor electrico y receptor , al lado de un drone es praticamente analogico . Mi pregunta es lo puedo volar con la telemetria apagada ? mi helicptero vuela totalmente manual no como los drones que dependen de los satelites para ubicarse y poder retornar por cualquier motivo . Y si lo puedo volar con telemetria apagada , no es necesaria una SD Card. , estoy en lo cierto ? saludos desde Argentina , Santa fe cap. .
This is all looks so simple, but have been going round in circles with this one. Do you know of a scenario whereby the lights appear to show the binding as successful (i.e. green light solid and red light flashing) but I get no stick feedback in Betaflight, and when I turn off the controller the lights stay on on the receiver? (i.e. solid green, flashing red)?!
I think your supposed to turn the reciever off then power it on again then it should be good. But I dont know for sure so only try stuf if your comfotable with doing it.
What is the little white plug for? If I'm going to run the D4R-ii in analog mode (is that PWM?) , powered by an Emax 30A ESC, do I plug the ESC into CH4 for both power to the Rx & to control the throttle?
Great video, but mine doesn't work like that. When I select BND so the QX7 beeps, I hold down the button by the light on the X4R rx, I get solid red and green. I pull the power from the drone, press BND again to stop it beeping, return to menu but when I plug the drone back in I just get a blinking red. Any ideas?
I don't get the popup whitch says:8 ch telemetry on or off and 16ch telemetry on or off. I am using the absolute latest version of open tx wich is 2.2. Which version are you using in this video? Or what else could it be that I dont get that popup?
I forgot I had set the advanced bind options in the companion when I flashed the radio. I was a little surprised to see the popup myself. If you dont see it that will be fine, it will bind all 16 channels to the one receiver by default (which is what you want). If you DO see it you either accidently set it (like I did) in which case pick the one I picked, or you know what you are doing.
Hi. first of all, thanks for your video. It's the only one which explains the solid red/green light. I have tried to follow the steps and flashed eu2_170213.bin to my Taranis Q X7 bootloader, the X4R_LBT_build151118.frk to my external device (X4RSB) and XJT_LBT_build151223.frk to my internal device but the solid light remain. I am totally desperate now, not sure what I am doing wrong. The Taranis is set to D16, with channels 1-16 but when TX is searching and RX is plugged in, solid lights remain. I also flashed OpenTX 2.2 with eu mode checked HELP PLEASE.....
+T1M1985 I've never swapped to the EU firmware. Did it bind on the original firmware? I'm sure someone has done a video on how to get this working. Reflash it all again.?
Tap the 3 line button to bring up the model menu and then Tap page to get to the first page.. Scroll down.. When you make a new model its literally the first page you see, just down a bit.
+kampkrieger I have to admit I had to watch my own video on how to bind the receiver when I tested frskys fc. Binding is something I don't do enough to remember it properly.
the menu of this thing is quite unintuitive. there is pressing menu, and pressing menu longer, and then you navigate with page.... it is my first remote with a display and more complexity. I bound my tiny cute XMR to it :-) But a tutorial should start with: "Turn it on"
does my frsky fcc receiver need to be flashed first? It seems bound and I have the armed set, but not getting props to spin
Same here
Let me know if you figured out something
Thank you, this helped me out a lot.
A quick tip: to switch between upper case and lower case letters... highlight the letter and hold the enter button.
This transmitter will match all types of receiver
Damn, my Taranis is not doing this beep sound when I hit the Bnd button. Does it have to make a sound?
Nice video,but my qx7 don't have the D8 option,can it be changed? Or it has something to do with the version of the transmitter? Thanks,have 5 receivers now that ai can't Bind..i only have D16,LR12 and OFF.. :(
Hola , estuve viendo tu video y vi en una parte que decis que se puede desconectar la telemetria , yo compre la Taranis Qx7 para usarla con un receptor Delta 8 en un helicoptero viejito un KDS 450 electrico pero esta practicamente sin uso . Lo unico que tiene este modelo es servos , giroscopo , motor electrico y receptor , al lado de un drone es praticamente analogico . Mi pregunta es lo puedo volar con la telemetria apagada ? mi helicptero vuela totalmente manual no como los drones que dependen de los satelites para ubicarse y poder retornar por cualquier motivo . Y si lo puedo volar con telemetria apagada , no es necesaria una SD Card. , estoy en lo cierto ? saludos desde Argentina , Santa fe cap. .
This is all looks so simple, but have been going round in circles with this one. Do you know of a scenario whereby the lights appear to show the binding as successful (i.e. green light solid and red light flashing) but I get no stick feedback in Betaflight, and when I turn off the controller the lights stay on on the receiver? (i.e. solid green, flashing red)?!
Steve Collins I am having the same problem. Did you get it figured out?
I think your supposed to turn the reciever off then power it on again then it should be good. But I dont know for sure so only try stuf if your comfotable with doing it.
Mine shows xjt d16 on internal. What’s xjt?
Hello
I have a D8r ii plus and then i bind it to my qx7 the servos work but the red light is lit all the time?
What is the little white plug for?
If I'm going to run the D4R-ii in analog mode (is that PWM?) , powered by an Emax 30A ESC, do I plug the ESC into CH4 for both power to the Rx & to control the throttle?
trying to bind mine to the baby hawk r and i dont have the option for D8? D 16 and LR 12
I'd say because it's new it would be d16 anyway, but the European version of the firmware won't do d8, so you won't see the option.
i down loaded the latest open tx 2.2 and installed the firm ware. we are bound and working.
Great video, but mine doesn't work like that. When I select BND so the QX7 beeps, I hold down the button by the light on the X4R rx, I get solid red and green.
I pull the power from the drone, press BND again to stop it beeping, return to menu but when I plug the drone back in I just get a blinking red. Any ideas?
Sam Butcher its been a month now,how did you figure it out?
Hey, me too. I tried everythink and it doesnt work. Any ideas?
Very helpful, thank you so much
I don't get the popup whitch says:8 ch telemetry on or off and 16ch telemetry on or off. I am using the absolute latest version of open tx wich is 2.2. Which version are you using in this video? Or what else could it be that I dont get that popup?
I forgot I had set the advanced bind options in the companion when I flashed the radio. I was a little surprised to see the popup myself. If you dont see it that will be fine, it will bind all 16 channels to the one receiver by default (which is what you want). If you DO see it you either accidently set it (like I did) in which case pick the one I picked, or you know what you are doing.
very useful thank you
Hi. first of all, thanks for your video. It's the only one which explains the solid red/green light. I have tried to follow the steps and flashed eu2_170213.bin to my Taranis Q X7 bootloader, the X4R_LBT_build151118.frk to my external device (X4RSB) and XJT_LBT_build151223.frk to my internal device but the solid light remain. I am totally desperate now, not sure what I am doing wrong. The Taranis is set to D16, with channels 1-16 but when TX is searching and RX is plugged in, solid lights remain. I also flashed OpenTX 2.2 with eu mode checked HELP PLEASE.....
+T1M1985 I've never swapped to the EU firmware. Did it bind on the original firmware? I'm sure someone has done a video on how to get this working.
Reflash it all again.?
My Qx7 doesnt beep when in binding mode, does anyone know how to fix this??
Sebastián Aramburo I’m
Having this same problem, can you help me ?
i want to get the TX and RX for my Wizard. thx
KennyLee NYC same
Taranis QX7 Instruction Manual:
www.frsky-rc.com/wp-content/uploads/2017/07/Manual/X7%E8%AF%B4%E6%98%8E%E4%B9%A620161228.pdf
Taranis QX7s Instruction Manual:
www.frsky-rc.com/wp-content/uploads/2017/07/Manual/X7S/Manual-X7S-1709111.pdf
And a nice tutorial:
rcdiy.ca/taranis-q-x7-tutorial-first-flight-setup/
this is only on the international versions,not the lbt!!!
PDF Instructions for the D4R-II
www.frsky-rc.com/wp-content/uploads/2017/07/Manual/D4R-II.pdf
.PDF Instructions for the X4R & X4R-SB
www.frsky-rc.com/wp-content/uploads/2017/07/Manual/X4R%20X4RSB%20CPPM.pdf
get on with it geeze
+Bryan Strong never! You will hear me waffle on and you'll like it! :)
screw it! You are not starting at 0, I dont know how to get into this setup screen. NOt a tutorial !! :(
Tap the 3 line button to bring up the model menu and then Tap page to get to the first page.. Scroll down.. When you make a new model its literally the first page you see, just down a bit.
thank you, but already got it done somehow, so complicated... :D
+kampkrieger I have to admit I had to watch my own video on how to bind the receiver when I tested frskys fc. Binding is something I don't do enough to remember it properly.
the menu of this thing is quite unintuitive. there is pressing menu, and pressing menu longer, and then you navigate with page.... it is my first remote with a display and more complexity.
I bound my tiny cute XMR to it :-)
But a tutorial should start with: "Turn it on"
GET ON WITH IT ALREADY!!!! Why do people take 9 mins to talk about a process which takes 10 seconds.
"Quick tip"
10 minutes to bind a receiver? Not really a “ quick tip”
I didn't want to call them hot tips and get a TH-cam ban.