Taranis QX7 - First Initial Setup Steps
ฝัง
- เผยแพร่เมื่อ 1 พ.ย. 2024
- This video will show you the first initial setup instructions for your new Taranis QX7 radio. Make sure to watch the next video in the series on how to setup the switches for BetaFlight.
My Freestyle Rig
iFlight XL5 - goo.gl/wnRrC6
Matek F405 CTR - goo.gl/WaHf4u
2306 2500kv - goo.gl/283qkM
GemFan 5043 Wind Dancers - goo.gl/UqgBPf
Foxeer Predator - goo.gl/8vG83c
AKK Ultimate Vtx - goo.gl/BbaexV
My FPV Gear
Fat Shark Dominator V3 - goo.gl/WUV2QG
Taranis Qx7 Radio - goo.gl/1psTEk
GoldBat - goo.gl/NFQB7a
Duo Charger - goo.gl/tKqJ9r
Drone Bag - goo.gl/q29t9Q
Amazon Influencer Shop www.amazon.com...
Find me on social media at:
Facebook - FPV_EvilMunkey
Twitter - FPV_EvilMunkey
Instagram - fpv_evilmunkey
AirVuz - goo.gl/DDXdmk
#taranis #taranisqx7 #taranissetup
I have watched lots of videos on this subject, and this is the most straight forward one. Thanks a lot, it was really helpful!
Thank you
Thank you for this great info. It is just a bit dated as the new Taranis QX7 has different menus in some places but was easy to follow along. Thanks!
Thanks yes this is a older video
Thanks for doing a great video with all visable. Was easy to follow along
The JR bay in the back will hold my TBS crossfire module. For my extended FPV rc Summit's radio link I need for my channel.
Thanks again for making it a bit easier. I didn't even try to fiddle around before I watched.
Your welcome glad it helped. Thanks for watching
Yes the bay in the back will hold a crossfire. I use the full version and works fine
This is the first video I opened after receiving the Qx7 S. Great video, thank you!
Thanks and thanks for watching
Did you get yours running? I get mine delivered tomorrow and tryna see how to simulate this first. Any recommendations?
11:44 where can I find more about this component? Or will you tell us what the external part does?
@@rtony209 yeah it was up and running great! My one recommendation would be to update the firmware as soon as you get it. My power button would flicker even after turning it off, firmware update solved it. Good luck with your application!
It's a module bay for like the TBS Crossfire system, or a multi protocol module.
Thank you! I am so interested in this, but it is a bit overwhelming. I am a noob. This was helpful.
It is at first. Once you figure it out your all set. This is by far my favorite radio.
I'm having trouble binding, I have a new Arris 220 I think I lost the profile somehow, how can I bind my controller to my drone? Any sort of link to a video or somebody who shows initial setup
Thanks for the great video. I bought the transmitter a few days ago and the video is a great help to me.
Thanks and thanks for watching
Thanks Michael. I'm a noobie to the hobby and as you know there's a HuGH learning curve this this awesome hobby. In fact enough to put more grey hair on my already grey head. If you can, i would love more dumb details. Lol. I know it may be boring to some, but for the new guy it's life altering. Lol. Also can save marriages. Lol. Ie, actually going threw the download process of open tx, step by step unziping, making folder etc, binding a model, osd commands and how to do them lol etc etc thx again for the video. New sub and looking forward to your content.
Michael D
Fancy seeing you here Mikey....... Yahooo......... And thanks FPV_EvilMunkey for the video for my new FPV setup
Did you ever get a response?
pots means potentiometer not "little squares the"😂😂 i think u forgot to move therr pots back and forth like you did the sticks.✌🏽💚 keep being awesome thanks for the help
What could the pots be used for on the q x7?
If you lift the battery tray out, you can plug and unplug the power jack before you remove the back casing.
Ya actually I've done the battery mod. Already tha is for the info.
Nice! I want to chance the tray to a real battery instead :)
Thanks! i just turned on my Qx7 and i was like "WTF now"?!?!?. lol
Your welcome glad the video helped.
I felt the same way when I turned on the RC... lol
Thx.. Just ordered this one. This will give me a head start.
Thanks for watching
Not much of a head start cause when you get it you'll probably have to watch 3 more times. When you actually get it in your hands stupid will fall apon you. Good luck lol
'you go in and mess with those...' -is that telling us anything? ' you go all back up again and hit 'select' but your hitting 'exit'. -whatever.
I just found that I have 2.3.11 -a lot different. You should say what version of OpenTx your working with.
Okay thanks for the feedback. 👍
Excellent video as usual...
!!! I need some help please !!! I have an eflite viper 70 mm edf and I bind my Taranis QX7 with Spektrum Rx AR636A AS3X using the JP4IN1 Jumper Multiprotocol Module....... everything is working good, but I don't know how to make the Safe works, how can I assign a switch to enable or unable that option?..... I'll appreciate any help... thank you....
Thank you. I honestly don't know anything about that module. I only use the TBS Crossfire.
Orange rx Tx6i or frsky taranis qx7 for rc plane?
It is taranis qx7 just for racing drone?
I don't know about modules I only use Crossfire. This can be used for planes yes.
Will this work with any drone? What makes this better then the one's that come with the drones that you buy?
Hey dude, I need help. I have a Taranis Q X7 controller, which worked perfectly for months. But a problem just appeared, when the sticks are centered, it shows on the screen that they are actually not, they're at about a 2.5 degree angle, both of them. This affects flying pretty badly, do you know how I could fix this ?
the link to this transmitter is from racedayquads and they give you an option to iclude a battery! but i need the battery charger so can you give me a link?
Is that how you set the alert for remote battery or plane battery? Can you set more that 1?
Mike, thanks very much you helped me tremendously nice video
Video muy impresionante y muy bien explicado , por favor pasenlo al español hablado , gracias y saludos desde santa fe cap. , Argentina.
great video thanks for the info
Your welcome and thanks for watching
Ok, I've been trying to search how to power on the Taranis without having to press and hold, but have no luck.
You seem to be able to just click on the button and your Taranis switches on immediately, is there some sort of configuration I need to set?
I have a Taranis Q X7S.
Should be the same setup as mine. Try reaching out to FrSky directly.
Yeah, actually got the answer to why a few weeks back. Basically the latest OpenTX firmware forces you to hold the power, whereas one of the older firmwares allows you to just press the power without holding it down to turn on or off.
Is this transmitter buddy box capable?
Yes, I believe so there is a trainer mode option.
Yes. That is the main purpose to the momentary switch on the transmitter.
Great vid.. love the intro/outro
Your welcome glad it helped
Firmware update files are no longer on the FrSky website.
I just went to the FrSky site and clicked on the download section and picked my radio the QX7 and all the firmware is there. www.frsky-rc.com/taranis-q-x7-3/
How do you know what version it currently is?
I’m getting ready to order this because I have a wizard x220 on its way from China , what receiver would you recommend and why there’s so many choices I don’t wanna order the wrong one
Thanks in advance
I like the FrSky XSR it's small and has a good range
Mike's Drones and More
Thanks man I should have the taranis and that receiver Monday or Tuesday more questions when my wizzard gets here :) keep up the great videos
No problem glad to help
Where can I find the Rick and Morty sound pack?
Open Google. Search for Taranis Rick and Morty Sound Pack
Thanks👍
You're welcome glad it helped
I'll keep you updated in the coming days, I will be receiving mine very shortly. One of my very first purchases towards fpv.
Good video but where the hell is the second part? =P
I've been super busy I'll try and get it
Part 1 and only.
Haven't had a chance to do the follow up video.
why not use the PC program to setup and then download to Tx?
I like programming from the radio
easier for user to use PC..are we here for the user or the views?
what battery does it use
Lots of options. Stock is 6 AA batteries but, I am using a 2S 3000mah lipo now.
This is not initial setup if you have models inside when you turn it on.
Um you have to setup models in order to show people how.
Thank you
@@FPVEvilMunkey that don't make no sense, you have to show us how to set up models. How can you do that if one is already set up, my main question is how do I bind. Also I have a tiny hawk that says I should be in d8 and all I can find is d16
sup mikey good job
Thanks
Initial setup? Don't you have to bind something first
Lol ur throttle n ur "rottle",,, roll
Hey thanks for watching. Yep from Colorado so I have a Southwestern accent.