I used SW Extreme block on raw drywall with all kinds of sharpie writing on it. It covered great and almost looked like a finish coat. On mobile home wall paneling I used SW Prep Rite Latex Primer with a Emerald as a top coat and turned out great too..
Great video, I love the Zinsser and the Kilz products. I also use Kilz 2 for sealing things that don't need the original oil-base Kilz. A great example is peeling paint on exterior wood trim on the outside of my house. I just spot primed the bare spots where the paint peeled off with some Kilz 2 before top-coating. Another case where you want to use primer even on already-painted surfaces is when you're painting over old oil-base finishes on woodwork, cabinets or furniture. The previous owner of my house painted the banister that was originally an old lacquer finish. They just used regular latex paint without any primer, and now you can scrape the paint off with your fingernail. That's why you always need a bonding primer like the Zinsser 123 before your new water-base paint. Another good one from Zinsser is Cover Stain. It's tough to work with, but great for certain applications.
I worked at Lowes in paint for 10 years..and I worked at Home Depot paint dept for a short time recently..and we didn’t carry the Gardz or the Pro triple 9. People asked for it but we didn’t carry it. Zinsser 123 has always been my favorite primer.
Thank you for your video. I taped off some walls around windows I was priming, but when I removed the blue tape it took old wall paint with it in random chunks and the brown drywall paper was exposed. I wanted to cry! I have never had such a disaster of painting. I already have the Zinsser 1-2-3, so was happy to hear I could prime these exposed areas of drywall with that and not make yet another trip to the paint store!!! I'm not sure why this happened in the first place though. I am guessing I sand down any rough edges then prime, then paint. If I need to level with some spackle, does the spackle go ON TOP of the primer or under it? Thank you. The only reason I didn't hire a professional was time. OMG, last time I will paint for myself. Oy!
Heya Paul. I do believe 123 is acrylic water-based not latex. Just thought I would share. I much prefer acrylic over latex but I am a rookie and i know little, but I know I like acrylic paint 🙌🏼
Dude...... thanks so much. I’ve got a rent house that I had to scrape the entire master bedroom paint. I wasn’t sure what to use on the bare drywall. Imma use the gardz now.
Great info Paul! I’ve used all of these except Guardz over the years. Have some water damage right now I need to take care of. My house is all old plaster and lathe, so no drywall here. It can be a pain, but I never get accidental dents or holes...this stuff is tough! Have a great new year. Live long and prosper!
You mentioned still having to prime over PVA drywall sealer/primer. I just sealed 170 sheets of drywall with 15gal. Of PVA. Should I use a primer or will paint with primer in it work? Love your videos. I’ve been following your videos for a long time and they’ve helped me a lot.
i believe in priming exterior surfaces with 1-2-3 especially much older homes, the primer and top coat act as one finished product 1-2-3 bonds very well whereas just coating a finish paint does not so much. jobs last many many years compared to just toping with a finish coat.
Like 68! How are you buddy? A good primer is half the battle! Love killz! I always use that primer! That stuff will cover anything! Great stuff! Zinsser is another great product! Great informational video too! Enjoyed the video from beginning to end! 👍 Always a full watch from the Animal Papa! Hope all is well with you my friend! Take care till next time and stay in touch! 🙂👍❤️
Mahalo Brother for your ON POINT recommendation. I recently had my "Happy Wife Happy Life Kitchen renovation" completed and the electricians made a whole bunch of fun for me throughout the ceiling, so before i paint, i need to smooth down my chunky Mtn of mud...but after that...I will use that spray primer, painting the ceiling white so no primer for that, and my accent wall is green, which i will be only repainting the same or a little darker green( Paul, the little patch work on the green, would you suggest i primer a green spray because the new paint be absorbed? or no need) Mahalo again for all your help...Dana from Oahu...
I use the BIN Shellac-based primer as a foundation coat on all my bare interior wood (moulding) that will be painted. Dries fast, good knot/grain coverage and dries quickly. I do have a question. What would you use for remodeling where you have a combination of dry wall surfaces - new bare drywall with mud, existing painted drywall that butts to the new stuff, and painted with spackle patches? I'm guessing the 1-2-3? Thanks.
So, use the 123 product for NEW drywall? I just installed and level 4 finished my basement and level 2 finished the garage. Should I use 123 for both areas? Thanks. Helpful video!
Great info, thanks! I pulled some chair rail off and scrapped the loose/flakey latex paint - 123 should lock down the edges of the loose paint right? Going to sand the rest of the wall with 60 grit (eggshell latex) and skim coat - should I prime everything with 123 before skimming? Thanks is advance!
We carry the SW high build spray can primer for spot priming, Zinsser Shields wall paper primer for obviously what the name states, Zinsser Bull Eye 123 primer as a general wall primer, instead of Gardz we like Zinsser BIN shellac based primer for mostly trim work and of course Roman Rx-35 PRO-999 for bare sheetrock walls. We spray almost all our primers except the Roman and have found these work the best. PVA primer is for amateurs... lol.
So don’t bother with using a pva primer for new drywall repair? I thought that was a must now I’m a bit confused can you please explain thanks in advance….
you might not know about newly plastered walls but i’ll ask anyway…. what do you recommend for blueboard with new plaster? is KILZ 2 latex good for new plaster? since this plaster is as smooth like glass, would you use a foam roller? what are your recommendations for fresh new smooth plastered walls?
QUESTION....Wife pulled off wallpaper in bathroom and damaged the drywall. I used Gardz over all of the drywall because the drywall was bubbling. After the repairs should I use a PVA primer over everything before paint?? Suggestions??? Thanks
Yeah, i sprayed some oil based, a few minutes without respirator & got a sore throat.. fk now i wear a mask just rolling latex. If your rolling out whole rooms the fumes give me respiratory issues.
I'm getting ready to seal my walls after wallpaper removal. The original walls were painted and orange peal textured before wall paper was applied. I washed walls with warm water using towels to remove most of glue. This removed some of old texture and down to the drywall in some places. I'm going to retuxture walls and after that seal with oil based Kliz. Most recommend oil based primer after removing wall paper. My buddy says use latex primer because latex paint over an oil base is not reccomended.....I think he has old information.. Latex primer will wet the glue and lift it in my experience. What's your recommendation or experience suggest? Thanks for the how to videos!
What are your thoughts on Kilz Restoration (aka Max) primer? Have an 80 year old house where the trim/doors were originally painted with oil based and at some point have had a latex based on top. Have to scrape some of it, sand, and sometimes have a hard time with flaking when the oil based layer starts showing. Thanks!
Really enjoy your work. What is it about the brown paper that causes the drywall mud to bubble? You mentioned in a previous video that regular primer will not seal the brown paper. Why is that? Thanks.
I was also wondering what would be good for unpainted popcorn. I know some people just roll on a few coats of oil primer and leave it at that. (I'm not planning on smoothing anything though).
my living room is currently has mustard color on the wall and i want to paint Taupe white over that, do i need to prime before i start painting Taupe white?
So I just removed popcorn ceiling in a few rooms and I definitely can see some of the yellow joint tape. I have to skim coat everything to get it smooth but I’m not sure if I should use the water based surface sealer or the oil based primer before skim coating it. What do you recommend?
Issue in my house is someone primed over vertical stripes in my living room...my whole room is white now, but there are faint shadow lines of vertical stripes. Would you recommend a skim coat of drywall or a high build primer and sand? Thanks
Bought a house, it has trim in excellent condition that was painted in oil base paint but ugly shade and has yellowed. Which primer should I use to cover this with a water base paint? TIA.
I have mold on my walls so im looking to replace them with new Drywall anyway but, is painting them with Zinsser mold killing "Primer" to prevent future mold on the new drywalls a big no no? Should i just use regular primer on new walls? Thanks for response 🙏
Hey Paul I have peeling paint inside on knockdown walls, I have decided to seal them up with primer and start fresh. Would you recommend an oil base primer for that? I was thinking coverstain
I did a repair on my cathedral ceiling corner replacing some loose tape where house settled. I used plus 3 drywall compound as topcoat. The original paint is latex. Is it ok to use kiltz original or zissner 123 over the repaired areas and edges of original paint before repainting? Do I need to let the kiltz dry long time? Thanks.
Please help, i have a old house with plaster and i used confill to fill the cracks and have skim coated the walls with lite mud, what primer should i used before paint?
Latex is pealing off prior oil-based trim. Wanting to paint over this mess. Will Zinzzer 123 prevent the peel off if i sand and prime with that before painting?
Aloha! Mr Paul, what primer do you recommend using over skimmed coated walls in a bedroom? I recently purchased Kilz 3 Premium Primer because internet recommends it, but I would like to know what the pros think? A big Mahalo from the Hawaiian Islands.
@@PaulPeck Thank you so much. It's been a bit confusing choosing a primer. Is that primer good at filling voids I might have missed during sanding and my last sanding check?
I sprayed some Kilz on a few spots on freshly skim coated wall. After I painted PVA the parts with Kilz have a different sheen and are “flashing”. Will that go away once I paint?
Hello I had a leak from my shower my downstairs plasterboard wall was all wet I had new plaster on it after weeks got it paints but I have small stain mark ans some part I have powder like peeling off what paint do I need on it please
Hey Paul one more question. Do you recommend sanding the primer and in between coats of paint. What grit of sand if so. Again, thanks for the info. Love the channel
No problem, I really enjoy your videos and also like that you are a humble teacher that interacts with all of us here online. Thanks, Paul! 🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸
Gardz. This is one of the specifications it was designed for. The watery consistency makes it a lot easier to apply (brushing corners and rolling out walls) than pva or full bodied primers. It is a primer/sealer, so the surface is uniformly sealed and ready for topcoating. I prefer a smaller nap roller than Paul mentioned (1/2"), to better control the drips etc. I only mention this in case you would find 1/2" nap too messy.
Hi Paul my channel was hacked I have resubbed to you I hope you do too Tyfs ❤ Have a nice day hope to see you soon Happy new Year!! Just saw you at Duty Rons.
Bulls eye 123 says all surfaces even ceramic… glossy stuff etc Do not buy it peels extremely easy! Waste of money and time. Maybe is good for drywall But nothing else!
![⚔️จำกัดเวลา⚔️ [พากย์ไทย] ซอร์ดอาร์ตออนไลน์ ซีซั่น 1 - ฉบับมัดรวมทุกตอน](http://i.ytimg.com/vi/ohkfBVDXLSA/mqdefault.jpg)
Here's a great video to watch next:
How To Skim Coat Your Ugly Ceiling With a PAINT ROLLER!
th-cam.com/video/9cKFJZNfdKQ/w-d-xo.html
I used SW Extreme block on raw drywall with all kinds of sharpie writing on it. It covered great and almost looked like a finish coat. On mobile home wall paneling I used SW Prep Rite Latex Primer with a Emerald as a top coat and turned out great too..
1-2-3 is good for wallpaper installation when you’re doing double cuts. It prevents the wallpaper from pulling off the primer.
Great video, I love the Zinsser and the Kilz products. I also use Kilz 2 for sealing things that don't need the original oil-base Kilz. A great example is peeling paint on exterior wood trim on the outside of my house. I just spot primed the bare spots where the paint peeled off with some Kilz 2 before top-coating. Another case where you want to use primer even on already-painted surfaces is when you're painting over old oil-base finishes on woodwork, cabinets or furniture. The previous owner of my house painted the banister that was originally an old lacquer finish. They just used regular latex paint without any primer, and now you can scrape the paint off with your fingernail. That's why you always need a bonding primer like the Zinsser 123 before your new water-base paint. Another good one from Zinsser is Cover Stain. It's tough to work with, but great for certain applications.
The Zinsser 123 water based primer also has great adhesion properties if you need to paint/prime something that most paint doesn't want to stick to.
I worked at Lowes in paint for 10 years..and I worked at Home Depot paint dept for a short time recently..and we didn’t carry the Gardz or the Pro triple 9. People asked for it but we didn’t carry it. Zinsser 123 has always been my favorite primer.
Thank you for your video. I taped off some walls around windows I was priming, but when I removed the blue tape it took old wall paint with it in random chunks and the brown drywall paper was exposed. I wanted to cry! I have never had such a disaster of painting. I already have the Zinsser 1-2-3, so was happy to hear I could prime these exposed areas of drywall with that and not make yet another trip to the paint store!!! I'm not sure why this happened in the first place though. I am guessing I sand down any rough edges then prime, then paint. If I need to level with some spackle, does the spackle go ON TOP of the primer or under it? Thank you. The only reason I didn't hire a professional was time. OMG, last time I will paint for myself. Oy!
Heya Paul. I do believe 123 is acrylic water-based not latex. Just thought I would share. I much prefer acrylic over latex but I am a rookie and i know little, but I know I like acrylic paint 🙌🏼
Dude...... thanks so much. I’ve got a rent house that I had to scrape the entire master bedroom paint. I wasn’t sure what to use on the bare drywall. Imma use the gardz now.
Great info Paul! I’ve used all of these except Guardz over the years. Have some water damage right now I need to take care of. My house is all old plaster and lathe, so no drywall here. It can be a pain, but I never get accidental dents or holes...this stuff is tough! Have a great new year. Live long and prosper!
Great information as always Paul! you're knowledge is so helpful to us all! Sharing you tonight!
You mentioned still having to prime over PVA drywall sealer/primer. I just sealed 170 sheets of drywall with 15gal. Of PVA. Should I use a primer or will paint with primer in it work?
Love your videos. I’ve been following your videos for a long time and they’ve helped me a lot.
Kilz is great stuff after doing a drywall repair....I agree....good video.
i believe in priming exterior surfaces with 1-2-3 especially much older homes, the primer and top coat act as one finished product 1-2-3 bonds very well whereas just coating a finish paint does not so much. jobs last many many years compared to just toping with a finish coat.
I didn't see this question answered in the other comments. What primer woud you recommend over skim coated walls that will be painted?
You could use Gardz, but 123 is great in that scenario
Like 68! How are you buddy? A good primer is half the battle! Love killz! I always use that primer! That stuff will cover anything! Great stuff! Zinsser is another great product! Great informational video too! Enjoyed the video from beginning to end! 👍 Always a full watch from the Animal Papa! Hope all is well with you my friend! Take care till next time and stay in touch! 🙂👍❤️
Mahalo Brother for your ON POINT recommendation. I recently had my "Happy Wife Happy Life Kitchen renovation" completed and the electricians made a whole bunch of fun for me throughout the ceiling, so before i paint, i need to smooth down my chunky Mtn of mud...but after that...I will use that spray primer, painting the ceiling white so no primer for that, and my accent wall is green, which i will be only repainting the same or a little darker green( Paul, the little patch work on the green, would you suggest i primer a green spray because the new paint be absorbed? or no need) Mahalo again for all your help...Dana from Oahu...
Man thanks for that guard tip you are right I was splashing the stuff everywhere thanks for sharing the video you have a new friend here
I really love Kilz. Great informative Video Paul!!! You expert knowledge is amazing my friend!!!
Removed an entire house worth of wallpaper. Gardz was crucial to success! If you have a Menards near you, they sell it there.
Thanks for sharing and have a great holiday!
I use the BIN Shellac-based primer as a foundation coat on all my bare interior wood (moulding) that will be painted. Dries fast, good knot/grain coverage and dries quickly. I do have a question. What would you use for remodeling where you have a combination of dry wall surfaces - new bare drywall with mud, existing painted drywall that butts to the new stuff, and painted with spackle patches? I'm guessing the 1-2-3? Thanks.
So, use the 123 product for NEW drywall? I just installed and level 4 finished my basement and level 2 finished the garage. Should I use 123 for both areas? Thanks. Helpful video!
Best Damn Video on primer! Thank you again Paul!
Those primers are just ok I use GRIPPER now it's the best; hands down the best,and it DON'T STINK
Great info, thanks! I pulled some chair rail off and scrapped the loose/flakey latex paint - 123 should lock down the edges of the loose paint right? Going to sand the rest of the wall with 60 grit (eggshell latex) and skim coat - should I prime everything with 123 before skimming? Thanks is advance!
We carry the SW high build spray can primer for spot priming, Zinsser Shields wall paper primer for obviously what the name states, Zinsser Bull Eye 123 primer as a general wall primer, instead of Gardz we like Zinsser BIN shellac based primer for mostly trim work and of course Roman Rx-35 PRO-999 for bare sheetrock walls. We spray almost all our primers except the Roman and have found these work the best. PVA primer is for amateurs... lol.
So don’t bother with using a pva primer for new drywall repair? I thought that was a must now I’m a bit confused can you please explain thanks in advance….
Great info! The right primer is so important to the final finish
you might not know about newly plastered walls but i’ll ask anyway….
what do you recommend for blueboard with new plaster?
is KILZ 2 latex good for new plaster?
since this plaster is as smooth like glass, would you use a foam roller?
what are your recommendations for fresh new smooth plastered walls?
QUESTION....Wife pulled off wallpaper in bathroom and damaged the drywall. I used Gardz over all of the drywall because the drywall was bubbling. After the repairs should I use a PVA primer over everything before paint?? Suggestions??? Thanks
Yo Paully Paul! Great info and vid as always. Hope you had a wonderful holiday! Take care my man.
Bulls eye shellac does not clean up with mineral spirits or thinner. You clean your brush or roller with warm water and ammonia.
Thanks very helpful, the paint information was helpful also .
I use 999 for sealing down brown sheetrock under-paper.
Yeah, i sprayed some oil based, a few minutes without respirator & got a sore throat.. fk now i wear a mask just rolling latex. If your rolling out whole rooms the fumes give me respiratory issues.
That guardz stinks something fierce. Airflow & Mask up!.. we call it a weenie roller up near Chicago. (Chicago hot dogs I guess)
Awesome video on primers my dude
See you on Blood x stream brother. Love your content. Keep up the hard work!!
I'm getting ready to seal my walls after wallpaper removal. The original walls were painted and orange peal textured before wall paper was applied. I washed walls with warm water using towels to remove most of glue. This removed some of old texture and down to the drywall in some places. I'm going to retuxture walls and after that seal with oil based Kliz. Most recommend oil based primer after removing wall paper. My buddy says use latex primer because latex paint over an oil base is not reccomended.....I think he has old information.. Latex primer will wet the glue and lift it in my experience. What's your recommendation or experience suggest? Thanks for the how to videos!
I've used Gardz over the remaining glue that I couldn't scrape off and it seals it down for latex paint quite well.
What are your thoughts on Kilz Restoration (aka Max) primer? Have an 80 year old house where the trim/doors were originally painted with oil based and at some point have had a latex based on top. Have to scrape some of it, sand, and sometimes have a hard time with flaking when the oil based layer starts showing. Thanks!
What’s the best primer for new drywall to hide tape lines
Really enjoy your work. What is it about the brown paper that causes the drywall mud to bubble? You mentioned in a previous video that regular primer will not seal the brown paper. Why is that? Thanks.
Hi, just found your channel. Quick primer question...what are the Kilz2 and Kilz3 primers used for?
Great info. Thank you
Great video😊
Which of those would you recommend to roll over unpainted popcorn ceiling before skim coating to get a smooth surface?
I was also wondering what would be good for unpainted popcorn. I know some people just roll on a few coats of oil primer and leave it at that.
(I'm not planning on smoothing anything though).
what about when you have fresh skimcoated walls? Prime so paint is not so absorbed, or just paint with all the dust or prime over sanding dust ?
Great video - Thank you. Is it possible to use oil based primer after applying drywall compound and cover it by water based paint?
Hey Paul,
Can I use the Kilz Spray oil based primer on a ceiling repair and knockdown texture if the paint is latex based?
my living room is currently has mustard color on the wall and i want to paint Taupe white over that,
do i need to prime before i start painting Taupe white?
So I just removed popcorn ceiling in a few rooms and I definitely can see some of the yellow joint tape. I have to skim coat everything to get it smooth but I’m not sure if I should use the water based surface sealer or the oil based primer before skim coating it. What do you recommend?
probably kilz if you need to cover stains, otherwise gardz works fine and is easier to clean
Great video!!!!
What about priming over VOG ? I was thinking the 1-2-3
Issue in my house is someone primed over vertical stripes in my living room...my whole room is white now, but there are faint shadow lines of vertical stripes. Would you recommend a skim coat of drywall or a high build primer and sand? Thanks
Bought a house, it has trim in excellent condition that was painted in oil base paint but ugly shade and has yellowed. Which primer should I use to cover this with a water base paint? TIA.
I have mold on my walls so im looking to replace them with new Drywall anyway but, is painting them with Zinsser mold killing "Primer" to prevent future mold on the new drywalls a big no no? Should i just use regular primer on new walls? Thanks for response 🙏
Hey Paul I have peeling paint inside on knockdown walls, I have decided to seal them up with primer and start fresh. Would you recommend an oil base primer for that? I was thinking coverstain
Best for sealing or covering cigarette smoke before texturing ceilings?
I did a repair on my cathedral ceiling corner replacing some loose tape where house settled. I used plus 3 drywall compound as topcoat. The original paint is latex. Is it ok to use kiltz original or zissner 123 over the repaired areas and edges of original paint before repainting? Do I need to let the kiltz dry long time? Thanks.
Please help, i have a old house with plaster and i used confill to fill the cracks and have skim coated the walls with lite mud, what primer should i used before paint?
I found a quartz size can of Gardz at Ace Hardware.
How much was it? Thanks
My house has old oil based paint on all the walls what primer should I use to be able to top coat in a water based paint
I would use Kilz Original. It’s an oil base primer and it’s made for painting over it with latex paints.👍🏻 I hope this helps. -Paul
@@PaulPeck I live in CA we cant buy that no oil based anything now its crazy.
did you say to use primer after using pva primer?
Latex is pealing off prior oil-based trim. Wanting to paint over this mess. Will Zinzzer 123 prevent the peel off if i sand and prime with that before painting?
Aloha! Mr Paul, what primer do you recommend using over skimmed coated walls in a bedroom? I recently purchased Kilz 3 Premium Primer because internet recommends it, but I would like to know what the pros think? A big Mahalo from the Hawaiian Islands.
Hey there Cindy! My go to primer after skim coating is Zinsser 123. I hope this helps from the East coast of Florida. -Paul
@@PaulPeck Thank you so much. It's been a bit confusing choosing a primer. Is that primer good at filling voids I might have missed during sanding and my last sanding check?
I sprayed some Kilz on a few spots on freshly skim coated wall. After I painted PVA the parts with Kilz have a different sheen and are “flashing”. Will that go away once I paint?
Can I use any primer on high gloss oily kitchen walls?
Hello I had a leak from my shower my downstairs plasterboard wall was all wet I had new plaster on it after weeks got it paints but I have small stain mark ans some part I have powder like peeling off what paint do I need on it please
Can you prime and paint over wallpaper glue?
After you’ve used the spray can, do you do anything special to it? I had a spray primer the gunked up
What primer do use to paint over wallpaper / rv walls ?
Yo! Nate Diaz does drywall now
What are your thoughts on Kilz 3 Premium versus the Zinsser?
What are you priming.? I definitely prefer The Zinsser123.👍🏻 But the Kilz Premium isn’t a bad product either. I hope that helps. -Paul
@@PaulPeck I'm changing a deep red wall to a light grey/beige. My concern is that the color will bleed through. Thanks!
What's the best primer to use over oil base if you're going to paint water-based over it ?
I would use an oil base primer like Kilz Original or Zinsser Cover Stain. Then you can paint with latex and you won’t have any adhesion issues.👍🏻
How long does it take for guards to dry before you start muddling #drywalltube
Can I use Gardz Problem Surface Sealer over already painted, but sanded latex painted surfaces because I am trying to resolve flashing problems?
Yes, you can use Gardz for that.👍🏻
Hey paul. Just had new drywall hung in are kitchen on the walls and ceiling. Which primer should I use for the new drywall.
I would use the Zinsser 123. 👍🏻
Thank you
Hey Paul one more question. Do you recommend sanding the primer and in between coats of paint. What grit of sand if so. Again, thanks for the info. Love the channel
Hello, are you able to mud over the gardz & 1 2 3 primers? 😊🇺🇸 thanks 👍
Yes, you definitely can mud right over either of those products Semper Fi!👍🏻 I really appreciate you watching and commenting my friend!😎 -Paul
No problem, I really enjoy your videos and also like that you are a humble teacher that interacts with all of us here online. Thanks, Paul! 🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸👍🇺🇸
What is best primer to use after I have skim coated a wall? So confused -
Gardz. This is one of the specifications it was designed for. The watery consistency makes it a lot easier to apply (brushing corners and rolling out walls) than pva or full bodied primers.
It is a primer/sealer, so the surface is uniformly sealed and ready for topcoating. I prefer a smaller nap roller than Paul mentioned (1/2"), to better control the drips etc. I only mention this in case you would find 1/2" nap too messy.
@@TobiasRaphael1 Thank you I've been searching for this answer...
I used Zinsser Gardz for newly skim coated wall and after one day later it’s completely peeled off rubbish!!
@@1987yuksel strange. I had excellent results with my gardz over skim coated walls. No peeling after several years.
👏👏👏👏👏👏
Hi Paul my channel was hacked I have resubbed to you I hope you do too Tyfs ❤ Have a nice day hope to see you soon Happy new Year!! Just saw you at Duty Rons.
I thought it was Steve o
😂😂😂
Bulls eye 123 says all surfaces even ceramic… glossy stuff etc
Do not buy it peels extremely easy! Waste of money and time. Maybe is good for drywall But nothing else!