SKODA FABIA Instrument Panel NOT WORKING (Mk1 99-07)
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- In this video I fix an electrical malfunction on the instrument cluster on a Skoda Fabia 1.9 PD MK1 (99-07) which is similar to other VW/Audi/Seat/Skoda models
Please Like this video:👍 • SKODA FABIA Instrument...
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • SKODA FABIA Instrument...
Buy Harvey a Coffee: ko-fi.com/hatb...
I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: Race_car / Bill Higley - Mini Vandals /Tonto - Silent Partner / youtube_audiolibrary / also music by Audionautix.com is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0)Images licenced under creative commons attribution license by 2.0. To view a copy of this license, visit creativecommon...
![[🔴LIVE] งานประกาศรางวัล MAYA TV AWARDS 2024 : มายามหาชน](http://i.ytimg.com/vi/nwmWYXXVwBY/mqdefault.jpg)
Some people's instrument clusters don't work on the fabias becouse of cracked solder joints from all the vibrations and temperature changes, only solution is to resolder them. I had this problem on my interior light on my fabia when you pushed on it it would light up, after resoldering every solder joint and bending back the spring contacts on the switch it works. Are you going to do a video on the airbag light? I bought an vag kkl 10€ diagnostic cable when you get used to it, it is a pretty handy tool. When you get the vcds lite or vag com 409.1 full version you can change features on the comfort unit (for the electric windows,... you should have it), program keys, test instrument cluster warning lights, lcd displays, the rpm meter, speedometer,... Or adjust power steering power level, adjust service intervals,.. It is a very powerfull tool when you learn how to use it, if you get it also get the service manuals so nothing get changed ireversably or damage. If you have any questions or want help leave it in the replay to this comment. Thanks for the great videos.
Thanks, I have already covered the dry solder joints on this board before @: th-cam.com/video/rEqad2PR0Lg/w-d-xo.html. In this video I believe the problem was moisture on the contacts from condensation caused by me leaving the widow open in hot weather during a downpour. these boards do get dry solder joints though from cyclic and extreme temperature changes as well as vibrations as you rightly say and I may have more of these lurking amidst it's underbelly. I haven't yet got VagCom, but intend to get it at some stage, my mate will clear the airbag light (well spotted) when I put the car back on the road for the MOT - no worries, I know why it's there, (did some work without disconnecting the power!) I would like to do more on the vehicles electronic fixes, but It is not my field so only an amateur at it. If you have any fabia electronic stories and fixes you would like to share feel free to share those on the channel or PM me I would appreciate that. Thanks for liking my videos and supporting the channel 👍 :-)
@@HatBoyHarvey No worries, keep the great work up. The vag kkl adapter works on vag cars older than 2006 some newer ones also work.
Thank you sir! Very thorough and helpful, as always. God bless you!
Thanks, you are very welcome :-)
I watch all your videos with curiosity and admiration... You are a good friend... I also have a 2006 model gasoline 1.2 Fabia... You are a lot of help in this regard... I'm glad to have you, my dear friend... I express my RESPECT and LOVE...
You're very welcome, you have a great fabia, look after her well my friend :-)
Skoda fabia profosörü sensen dostum .Çok teşekkürler iyi yayınlar.
Çok teşekkür ederim.
კარგი ნამუშევარია... ყველაფერი მაქსიმალურად და ანალიტიკურად....
წარმატებები ყველას
gmadlobt, chemo megobaro, bednieri mamodzravebeli :-)
you are the king , take care 👍
I have Skoda Rapid Tdi 2013 Stage 1 done. Have driven 2000km after doing so. I have just changed the battery and after new battery is set, the speedometer stopped and glowplug signing on. There is no pickup issue at all. Only kilometre reading stalled. Checked the ECM terminals, no ABS sensor issue detected. On scanner Speed reading is showing though , checked speed needle motor on scanner Ok. All error codes are erasing but Error code P061000 cannot be cleared. What to do ??
Make sure your earth connections are all good. Maybe the new bat needs coding again .correctly. Has it got stop/start and Kessy? If so you need vcds to code. If you have installed a chip tune - that chip may have failed. Check back with manufacturer to test and replace. Try taking out connections to instrument cluster, clean out connections with electrical contact spray and. Re-connect.
@@HatBoyHarvey ok 2 things i will check a) Earthing b) clean speedometer cluster socket terminals
No Kessy , it is remote operated without push at the door. And i did via Master Slave file download process from Diamond Trix , no chip tune
@@b-deep_bom shouldn't be the tune then, but you could try reverting it to standard again as a test to see if is that. Do you not think it's got something to do with the bat change? It was working fine before, right? Let me know how you get on :-)
Hello. I don't have check engine light when I bought it. I saw it after week after. What are the possibility why I dont have it?. Thank you
Which engine do you have?
@@HatBoyHarvey skoda fabia combi 1. Thanks
@@jocelynplumos6799 engine?
@@HatBoyHarvey 1.4 16 V
@@jocelynplumos6799 often the PCV valve needs replacing along with the crank case breather unit on this engine. Oxygen sensor could also be faulty and if you have idle, misfire issues then coil packs, plugs may need replacing. If you have access to an OBD2 diagnostic device it will narrow it down easier without spending unnecessarily :-)
Lol. I think the problem in the middle of Paris is the excessive heat and not moisture. Regards HBH.
I parked my car in the centre once; when I returned there was bumps and scrapes to the front and rear, terrible parking!
@@HatBoyHarvey and the things are getting worst 😂
Hi, i have a fabia mk1 and whilst driving every 40 or so miles the dash will bleep then the oil, power steering, handbrake and abs light will come on and the revs, speedo and temp gauge will drop and stop working, when I switch the engine on and off this resolves, do you have any experience of this? And would you suggest it could be a faulty instrument cluster?
Thanks!
Hmm, sorry to hear your having this issue. It sounds like a connection problem to me, check the connection to the ecu and ground connection and then, yes, look at the instrument cluster. Look for loose/damp connections and on the pcb, dry solder joints with cracks and if needed re-flow them. If you don't have much look then obd2 to read any fault codes especially when you think it is working ok. Work methodically and don't rush it :-)
Having the same issues mate , did you find a solution
I had this problem everything was flashing on my panel. I resoldered and it's working fine but the speed indicator still going crazy (especially in the zone 40-80kmh it starts being unstable and go back to zero when moving). Any other ideas could be causing this kind of malfunction. No warning lights come on.
The problem has returned and I haven't fixed it yet. No power and light ATM. Car failed in middle of nowhere. Had to get towed back.
@HatBoyHarvey I have the aqw engine and I'm currently thinking if it is worth swapping it with bbz but the engine rebuild I think will make the cost enormous. I had a lot of problems with this car during the year especially electronics. I don't know what to do actually and where to start.
@@THEWOWGODOFGEAR you use another torch
Thanks for the really clear video. I will do just as you did on a quiet dry day, I will be ever so careful about those cluster screws as I hate losing them where I can't reach them.
Ok..: you have been lucky, but what if the instrument cluster keeps beeping random lights?
Well we can deal with that when it happens as the older the circuit board gets that would seem inevitable, but until then I won't sleep with 'what if's' :-)
Dostum fabia arıza lambasını nasıl söndürebiliriz teşekkürler.
Hangi ışığa, arızaya ve OBD2 Teşhis aracına ihtiyaç duyup duymadığına bağlıdır. Basit bir şeyse, düzeltmek ışığın sönmesine neden olur. Herhangi bir arıza bilmiyorsanız, bir OBD2 okuyucusuna ihtiyacınız olacaktır. Arabanın hangi arıza belirtileri var?
Ce i-ai facut ?
Trebuie să am mai multă grijă să nu las ferestrele deschise în timpul unei furtuni pe viitor :-)
S-au aprins in mers ,martorii de la Abs,Esp si frana de mană ! Pe tester ,imi spune pompa ABS !
Защо трудно се върти волана напоследък на тази кола
Я не уверен, на каком видео вы это видели, но с рулевым управлением все в порядке. гидроусилитель руля работает очень хорошо, без проблем. это только немного грязно
The clock says you were 2 minutes looking for that screw. But yea iv have the same issue with screws falling into the abyss
We need to try harder :-)
I'm following your instructions this morning hopefully this works for me. Tell me did the cluster stay working afterwards
Kolay gelsin benim aracım la aynı bu araçta evap sistem ecu da nereye baglı elektrik gelmiyor bunun hakkında bir video çekebilrmisiniz teşekkürler.
Arabamda bu motorda buhar yok. boşaltma valfini değiştirin ve vakum sızıntılarını ortadan kaldırın
Muy buen video, muchas gracias desde Colombia
gracias, eres muy bienvenido :-)
hi harvey ! thanks for your videos, very well explained, and very pedagogically filmed. i was wondering if it is possible to add speed regulator on a fabia which have not that option.
You can add cruise control to most fabia bar the very early basic models. You will need to add it in adaptations with vcds or other obd2 diagnostic device.
Thank you so much for a informative video, very useful. My Skoda Fabia 1.9 sdi 01 makes a rattling noice in idle, any existing video to troubleshoot it? Many thanks in advance for any advise.
depends where the noise is coming from - inside or out? The exhaust rear heat shield fixings corrode causing the shields to become loose and rattle. Inside the central air vent attached pipes can become detached and vibrate. Engine and it could be just the tappets. Hope this helps :-)
@@HatBoyHarvey thanks heaps! The noise is louder outside on the passenger side. I will check all the points you have suggested and will thank you more once I’m able to fix the issue. If not, can I bring the car to you? :)
@@elsonrodrigues5214 it also could be something on the brakes or maybe just a loose under tray plastic. Have a go rummage about to feel for something; Sorry can only offer you online help :)
Hi. Skoda fabia mk1 has footwell light?
Nup!
Привет друг, твои видео работ безупречны
спасибо, вам очень рады :-)
Thank you,.very nice video! Furthermore, give your driverseat a proper wash? ❤ Thanks again for all your videos!
My garage:
Fabia -08
Superb -12
Thanks, Oh no! someone spotted my slovenly lack of interior maintenance, I was hoping to get away with that until my great aunt Gertrude could wash it :-)
@@HatBoyHarvey 😊😊😁
Is possible to put a speedometer to fabia 2001 from fabia with restyling speedometer,i think on fabia model 1 are both
Changing the instrument cluster will need the ECU coding
to adapt it and you will need the keys for that model too.
Hi I’ve the same problem on my Skoda Octavia 2009. Would your fix work on it.
All I've done here is disconnect it and then reconnect it. I believe this was down to the car stood idle for some time and moisture affected the contacts so if you think your scenario is the same it is worth a try. Don't forget to disconnect the neg earth lead before. Octavia will be very similar :-) the other thing it can be with these older cars I'd dry solder joints on the PCB which is worth checking for before you reinstall it. If you are careful with a soldering iron re-flow any joints that show cracking :-)