Mechanical engineer here. Gotta say, I absolutely love the "jump on it and rock it back and forth" method of evauating structural stiffness and deflection.
Great to see you back at it. I am building a food truck with a 14' box (from scratch) on a 1967 C40 Chassis. I have wavered back and forth over doing a small slide out to gain more floor space. Your version kept popping up in my head and just the other day I watched your other video on the slide out and was 90% sure I'm doing it. After watching this its 100% Thank you for posting these, I don't think the average person realizes just what a PIA it is to do the work and take time to record it.
Thanks Jeff! It's certainly not easy to film and do the work, but I do enjoy the process, I'm glad you're enjoying the videos. Good luck with your build! Reach out if you need any tips. Cheers
Your prob done by now but I would just put a suspension lock up system in the back end of the truck and then the only movement would be in the tyre side walls which would be minimal. Cool video mate... I'm watching in NZ
I have been so eager to see THIS build in particular.... the way you did the door was genius... and I'm STILL trying to figure out how you'll make this slide out AND pop up and down. I didn't realize you had to solve this additional support problem also. Anyway.... I'm glued to this build and I've been eager to see how you complete it. Can't wait to see it progress to being finished.
Thanks Tyler! I'm so pleased you're enjoying the process. I'll be installing the slide out room roof in the next month or so, I'm still figuring it out myself to be honest. Thanks for watching
Awesome build. I was looking for inspiration to put a slide out on a much smaller van so this build is perfect to watch. I don't think you would have to put the support legs on the slide out directly, I think this could actually cause the channels on the slide out to ware quicker as it will be holding the weight of the wind hitting the truck. You could look at fitting them under the main body. If you use the big hydraulic ones you could even use it to level it out which would be useful.
great solution. its a long time since you done this but id be looking to support to box and not the slide out room. you support just the room and you have all the weight of the box pivoting on the slide mechanism itself. IMO make support legs for the truck box and allow the slide out room to hang.
Hi Dan, one of the biggest causes of flex that you overlooked is the Stainless "C" channel will flare open [with load] near the outside entrance over time. This is why USA slide outs rails are inside square tubing. You will need to remove those "K" braces on the slide out and box the "C" channels.
Hi Dan, how about powered RVJacks on the chassis like a lot of RVs have. You could tie it into the electrical for the slide out so as it goes out the Jacks go down and support the whole vehicle. Just a thought.
I just discovered your channel and I think your truck build is very interresting, although I haven’t watched all of the videos yet. Good idea to add a support leg to stabilize it. What’s the extension going to be used for? Bathroom is my first guess, to allow for easy drainage away from the main body of the vehicle. Or do you have another plan for it?
Horizontal and vertical members only=deflection. A few diagonal members in the frame itself stops deflection more effeciently than adding supports all over the place.
That’s awesome Dan. You mentioned flexing on the box. Do you have flexible box to chassis mounts? I’m at that stage with my FTS700. Would love to see your set up.
Magnetic electric door locking mechanism check it out bro they use them on security doors you usually have to tap a button to release the magnetic 🧲 door locking mechanism very strong trust me😮😉✨👌💯🙋💯👌 think about it check it out on TH-cam videos just a suggestion ✨🧲🙏👋 Simpson from UK England "
Mate. Those stairs are AWESOME. I’m just about to start my own build and ran across your videos today.
Mechanical engineer here.
Gotta say, I absolutely love the "jump on it and rock it back and forth" method of evauating structural stiffness and deflection.
Damn... you are a one man team of experts! I am learning a lot from your team.
Glad to hear it, thanks for watching
Great to see you back at it. I am building a food truck with a 14' box (from scratch) on a 1967 C40 Chassis. I have wavered back and forth over doing a small slide out to gain more floor space. Your version kept popping up in my head and just the other day I watched your other video on the slide out and was 90% sure I'm doing it. After watching this its 100%
Thank you for posting these, I don't think the average person realizes just what a PIA it is to do the work and take time to record it.
Thanks Jeff! It's certainly not easy to film and do the work, but I do enjoy the process, I'm glad you're enjoying the videos.
Good luck with your build! Reach out if you need any tips. Cheers
Dan I can't give you any advice but I can say that I think you are doing a brilliant job and can't wait to see how things go. Cheers
Hahaha thanks Cameron!
I kind of liked the way barges drop down a support pole instead of the anchor procedure
Very impressive, Dan. I like the way the support acts like the third leg on a tripod and stabilises the whole thing.
Thanks Geof!
Looking to build a caravan myself thank you for giving me ideas 💡
Awesome intro this week! Can’t wait to see this project proceed!
Thanks Cam!
This is awsome art of camper .
Really enjoyed the Video. The way you executed the tension Support is brillant. I love it!
The Video was super interesting
Thank you! And thanks for the suggestion, keep em coming!
Your prob done by now but I would just put a suspension lock up system in the back end of the truck and then the only movement would be in the tyre side walls which would be minimal. Cool video mate... I'm watching in NZ
I have been so eager to see THIS build in particular.... the way you did the door was genius... and I'm STILL trying to figure out how you'll make this slide out AND pop up and down. I didn't realize you had to solve this additional support problem also. Anyway.... I'm glued to this build and I've been eager to see how you complete it. Can't wait to see it progress to being finished.
Thanks Tyler! I'm so pleased you're enjoying the process. I'll be installing the slide out room roof in the next month or so, I'm still figuring it out myself to be honest. Thanks for watching
Awesome build. I was looking for inspiration to put a slide out on a much smaller van so this build is perfect to watch. I don't think you would have to put the support legs on the slide out directly, I think this could actually cause the channels on the slide out to ware quicker as it will be holding the weight of the wind hitting the truck. You could look at fitting them under the main body. If you use the big hydraulic ones you could even use it to level it out which would be useful.
bravo
great solution. its a long time since you done this but id be looking to support to box and not the slide out room. you support just the room and you have all the weight of the box pivoting on the slide mechanism itself. IMO make support legs for the truck box and allow the slide out room to hang.
Hi Dan, one of the biggest causes of flex that you overlooked is the Stainless "C" channel will flare open [with load] near the outside entrance over time. This is why USA slide outs rails are inside square tubing. You will need to remove those "K" braces on the slide out and box the "C" channels.
Well done!
Hydraulic levellers you can use" 👌💯🙋😉🤔
Excelente trabajo, impresionante. Bendiciones
Dan, think about "feets" of estabilization on the truck, to estabilize all the truck, and not only the slide out.
Leveling Jack's on RV should stabilize body roll and eliminate the need for drop leg
excelente!!!! muy util para mi proyecto!!!!!. Mi Tiny House tendrá un slide out y estaba tratando de resolver las mismas cuestiones.
A short Acrow style prop might do, with the quick adjustments.
Something like that would work well, alloy to keep the weight down too
Would like to see your finished work
Hi Dan, how about powered RVJacks on the chassis like a lot of RVs have. You could tie it into the electrical for the slide out so as it goes out the Jacks go down and support the whole vehicle. Just a thought.
Not a bad idea, I am trying to minimise the amount of electric actuators at this point, I've got so many I'm worried about failures
@@dancampion ahh, makes sense!!!
very cool..
Thanks mate
Debes probarlo si funciona el mecanismo de deslizamiento,con 1000 kgs o 1000 litros de agua.encima.
That’s because like a camper it comes out ant hits the interior walls to stop deflection
I just discovered your channel and I think your truck build is very interresting, although I haven’t watched all of the videos yet. Good idea to add a support leg to stabilize it. What’s the extension going to be used for? Bathroom is my first guess, to allow for easy drainage away from the main body of the vehicle. Or do you have another plan for it?
Horizontal and vertical members only=deflection. A few diagonal members in the frame itself stops deflection more effeciently than adding supports all over the place.
Question plse - what's yr main reason/s for a slideout?
Guid rails mate similar to a lathe carriage
That’s awesome Dan. You mentioned flexing on the box. Do you have flexible box to chassis mounts? I’m at that stage with my FTS700. Would love to see your set up.
I do, I also sell the plan's and CAD drawings of the design
How much is it to install this
Mby build the leg on the truck and not on the slide out room, could be more practical and solves the issue of the suspension distraction
Show
Legs should be the way to go
Legs is the only way
So you need stabiliser similar to those used in caravans?
Something like that, but stabilisers on steroids
Hi Dan did you build your stair case or buy it pre built?
I bought it, it's called the revolution glowstep I think...
Magnetic electric door locking mechanism check it out bro they use them on security doors you usually have to tap a button to release the magnetic 🧲 door locking mechanism very strong trust me😮😉✨👌💯🙋💯👌 think about it check it out on TH-cam videos just a suggestion ✨🧲🙏👋 Simpson from UK England "