ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- In this video i show you how to open the Ducky ONE mechanical keyboard. after it's opened, you can repair or mod it.
PLEASE NOTE THIS WILL VOID YOUR WARRANTY. ALSO, I AM NOT RESPONSIBLE IF YOU BREAK OR DAMAGE YOUR KEYBOARD.
Hey bud, been a hot minute, but your video helped me when I took apart a Ducky One I bought ages ago. Thanks for putting this video up.
hello, i have a ducky shine 2 for a couple of years now and i found your video since im looking to change my keyboard case for a care that my keys are raised completely from the case itself. i dont know if you ever saw it or if its even possible but your video is really well made, it will help a lot.
Thanks mate! Very detailed video. Typing this from my shitty old chiclet keyboard, waiting for the glue on my ducky's destroyed usb connector to dry...
My Ducky One's Q key is out of order and I gonna swap it with a seldom used key... This is helpful. Thanks a lot
This video Helped me. Thankyou!
This video helped me a lot today, thank you!
Damn your videos save my day, it's hard to find this kinda videos and I kinda scared if I will break my keyboard.
Same! I found this video because I'm scared to disassemble my copy without knowing what's gonna happen. 😅
Hello. Your video was very helpful in showing how the opening of a mechanical keyboard MIGHT be accomplished, but it only got me so far. My situation appears to be unique, in that I have a DAS mechanical keyboard and opening the top two corners of the keyboard seems a bit different from your demonstration. What are the chances that you have a similar video for a DAS keyboard or can point me in the direction of just where I might find one? Thanks much for your video demonstration. It is appreciated.
can you do a disassembly of the Shine 6?
From doing this myself to customise a Ducky Shine 6. There are a total of 8 screws on the bottom of the keyboard. The first 5 are visible. The 6th is under the warranty sticker, unlike in this video you can't get the warranty sticker off in one piece. The 7th and eighth screws are under the small round rubber feet in the corners (not the square feet).
Once all those screws are removed you can loosen the clips at the top and bottom of the case as shown in this video using a credit card or similar.
HTH.
you da real guide bro thx
How to remove the usb connector plz ???
Thanks so much for this video!
Super helpful, thank you!
And how to disassemble Ducky one 2?
I have one question. How do you lube the cherry stabilizers?
Thanks for making this video, this is a very specific thing to want to do and I am glad I checked youtube.
When I removed the 5pin usb connector I did it from the other end (by accident) which is much easier however it seems I have damaged the keyboard by connecting it back but flipped the other way around. Is that possible? One way I get a message saying "usb not recognized" and the other way I get no message. No lights either way, completely dead. Checking with a volt meter I get 4.99V to the main pcb. Is there a fix to this or did I really break my ducky with reverse polarity?
afaik , ducky one is the only keyboard that has Nkey roll over over usb
It registers ALL keys when pressed , while most mech. keyboards only register 6 or 8 keys over sub
When you go to windows hardware , you,ll notice that the ducky one it seen as2 separate keyboards .
I think that's the way they do it
Are those PBT key caps? I didn't know Ducky made PBT key cap if they are. Thats the only negative thing about my Shine 3, the cheapo, thin ABS keycaps. Replaced them with some PBT caps frpm Aliexpress and it's amazing what a difference it makes. It feels and sounds so much better. Although I have to say, I do miss the Ducky branding on the windows keys and space bar.
they do make pbt double shot (rgb capable) keycaps. My Ducky One Rgb came with them.
Hi Tygier100, the whole second row on my Knoll? K100-109RGB-10Key gaming keyboard. Any ideas on where the bad trace might be?
So I snapped one of the casing clips off on my ducky, how do I fix it?
I have a different keyboard but it dissembles the same way. I cant figure out how ti take the corners off. Any tips?
Do you (or anyone else) have any tips for sourcing the LEDs themselves? I found someone on alibaba but they say I have to order 50 of them as a minimum (!). I only want to replace a couple LEDs
Hi. Mine is tkl version 1687s and someday i update the firmware (from the official website) but failed. do u know how to fix it?
does it have a metal backplate?
yes
My brother spilled some tea on my keyboard, and after unplugging it and letting it dry the left alt key is gummed up. I was hoping you might be able to recommend any course of action. I've got isopropyl alcohol, but I don't know if there is a proper way of cleaning mechanical switches or if im just screwed.
Lunch Box try to switch the switch
Great stuff. thanks for the detailed walkthrough. I have to ask, does the ducky one have the dreded "ping" noise from the metal backplate? My shine 3 tkl is slowly driving me insane.
+Johan Lindroos not on my unit. it's very quiet.
+tygier100 I thought as much. Shine 5 and One series seem ping free. Thanks!
Is there any way to open the switches themselves for lubing without de-soldering or is it impossible with the mounting plate in the way?
I'm interested in this, too.
You need to de-solder. the keys are on top of the mounting plate, and the only way to remove that plate would be to remove the keys. there is a small lip in the side of the switches.
You know how many people just spend 15 minutes explaining a mechanical keyboard. FUCKING ANNOYING! Thanks for the tear down.
can you disassemble a One 2 RGB version?
Does your warranty still last if you open it up but don’t modify anything?
My understanding is no. By opening it you void the warranty.
Lots of electronics have this on them (like a Playstation for example). A lot of repair activists are moaning about this a lot because its obviously very anti consumer.
Hey Bro, if i want to replace my switch do i must desolder the led pins too?
Or just the switch???
If you still looking for an answer; usually the led are attached to the top of the switch, I suggest to desolder the led too.
Thanks
Do you recommend any specific LED for these keyboards? One of the LED on mine has become dimmer than the rest and I'm not sure what I need to replace it with.
3mm flangeless. but it's very hard to color match since each batch of LED will have a different color. best bet is to send in for warranty replacement.
Here is the thing, My keyboard got wet and it's "Ins, Del, End, PgUp, PgDn" led was on at minimum brightness when it signals off. It turns on correctly with all the effects and not visible under the keyboard. Should I try to open it to dry it or leave it be?
Harry Tsang did u fix it ?
whats that white connector called
Thank you!
Tim Horton's represent!
Sthanks buddy
thank you
are the keys soldered on to the pcb?
yes they are
i bought the ducky one fullsize no backlight but it is possible to add leds?
A better bet tu just leave it that way or buy another keyboard.
i think it only works with blue leds coz there is a blue led version of the full size one
could you show me how to solve a problem im facing , i recently bought this keyboard about a month or so and my fingers are inlove with the keys and somehow , when i hit Enter it automatically hits capslock , and types SHFK, and i cant also use my backspace , because it also types in some random numbers like /31241 or something like that . it really annoys me pls help me pls im in despair
+Vyrix Lysteria was it water damaged? seems like some traces are shorted inside, or the diodes/IC are broken.
good thing i have the warranty , having it repaired now , thanks btw
The FN/Function key on my Duck One TKL RGB won't work. I've tried many online key testers and still nothing. The main problem with this, is that my RGB backlighting is stuck on rainbow and I want to change it to red. However, you can only change the RGB via pressing the FN key. Does anyone know how I can change the RGB without pressing FN? I tried using my other keyboard to hold down FN, however it didn't work for obvious reasons but that was the best I could come up with.
hold the two windows keys for 5 seconds will reset the board.. might help
So my D switch got messed up. Can I replace it with another switch anywhere on the keyboard?
Do you mean like it doesnt work 100%? because i have that problem with my W and D switches. they work fine if i press them *straight* down but if there is any sideways movement it will give plank and my character stops moving. Did you try replacing it with another switch and did it work?
@@Henqqad44 did you fix your issue..have the same issue on my w key?
@@talhamirza8053 i sent it back to the store so they can look at it. They havent said anything yet, im hoping they will give me a new one..
whats that wire inside of the keyboard called
A usb
seee them balls in the mechanism well mine are falling out and it makes a noise when i tilt it
I almost broke mine ;))
Does it work with a one 2 mini?
OwO Wraith. I think it does
@@sket4446 shit but its too hard for me to swap my x and y with holy pandas switches bc im to dumb to disolder
wew using ur ear cleaning tools
"fifteen minutes" it took me an hour to get the clips off
haiiiiiiiiiiiii :3