Quick Tips for Curing Screen Printing Ink
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Products used in this video:
Laser Temp Gun: screenprintdir...
Warrior Heat Gun: screenprintdir...
Wood Squeegee: screenprintdir...
Aluminum Frame: screenprintdir...
Check out these easy tips to ensure you properly cure your ink every time! These tips are valid for curing ink with a heat gun, heat press, conveyor dryer, or flash dryer.
No matter what you use to cure your ink you must ensure you do the following
1. Cure at the cure temperature stated on the ink container
2. Cure the ink for the recommended time stated on the ink container
3. Use a laser temperature gun to ensure the ink is hitting the proper temperature
4. Perform a stretch or wash test once the ink is printed and cured to guarantee the ink is cured before going into full production
Let us know if you have any questions or comments in the comments.
Thank you, this is very helpful!
Glad it was helpful!
Nice, quick and simple
Thank you! We try and make videos simple so people can follow along easily.
Could it work with plastisol?
Good question! Yes, this would work regardless of the ink being used.
Does the flash replaces the oven?
We wouldn't say it replaces it but if you do not have a conveyor dryer then the flash can definitely step in its place to get you by.
Is this water base ink?
it sure is !