How to Fix Oven Convection Fan (covers many makes and models)
ฝัง
- เผยแพร่เมื่อ 28 ธ.ค. 2017
- Oven Convection Fan Fix. Fix that broken convection fan that doesn't spin and makes an audible hum as it tries to run. This fix is easy and straight forward that anyone can do. This is how to fix your oven if the fan is not turning.
Stove doesn't power on? This might be the problem.
• How to fix an Oven tha...
#convection #oven #diy #fix - ยานยนต์และพาหนะ
I want to echo Eric Corvers comments EXACTLY! My samsung convection oven had the same fan motor issue and I followed your video to a t. Absolutely perfect video. Thank you very much!!!!
Thank you so much Junk Man. This video was EXCELLENT!!!! You covered EXACTLY what I needed to do in order to fix my Samsung convection oven fan by replacing the motor. Bought the new motor on amazon and re-wired the connector just like you described. PERFECT! Keep up the great work.
Our Jennair stove convection fan always goes on recently. Never did before while using conventional baking. We never used convection, but now the fan always kicks on. Why all the sudden this is happening? THUMBS UP!!!
My heating element had literally melted down, I needed a Prybar to get it out, your video was very helpful thank you.
Thanks for the help!
You helped me fix my oven. Thanks! :)
Exactly what I needed!
This helped a lot! Thank you!
Glad it did. Don't forget to like the video!
Great video thanks
nice! happy new year .
Great help with motor diagnosis. My motor wouldn't spin freely, but after removing motor I noticed the two bearing were dry but there was no damage yet to bearings. Each of the bearings had a hole in bearing shields showing felt for lubrication. A little oil in each hole and we are cooking again. Fan spins like new, oven heat up time back to normal.
Yes, this is my first thought here too -- these convection fans usually seize up because the bearings dry out. Re-lubrication should fix that. My other thought re the plug issue that happened in this video: my first instinct would have been to carefully remove the plug housing from the old fan and slip it onto the prongs of the new fan.
Did you have the motor off to lubricant the bearings?
This was the issue for my Samsung Duo. The fan was making a horrible sound, and hadn't seized yet. Took the fan apart, cleaned everything and applied 3 in 1 oil to the felt pads. Fixed the issue and running fine again (I think Samsung forgot to apply oil to the felt when assembling). $7 bottle of oil and a couple of hours of taking it apart and putting it back together again without buying a new fan motor. Thanks!
Very helpful video. Well done except the music is not necessary. Thumbs up overall. Thanks!
I appreciate it, thanks
thanks!
Nice, very clear instructions. Thank you.
Thanks for the great video! Having same problem. Can you point me to the part number for this?
That might be application specific. Check RepairCinic's website it is good for figuring out the mfgr part numbers.
Nice tutorial! Sub'd :)
Thanks. check out a few of my other videos and share them around if you like.
Thx boss
Good man good
Thanks for taking the time to make this video 😎👍 Do you know if by switching the wire locations on the motor would it matter,? Just want to know if you think the motor would reverse rotation if the wires were not put on the same terminals ? , not even sure if it’s possible.?
It is an AC motor, so no.
What should I do if the fan isn't making any weird noises and I can spin it easily but the isn't turning on? The two smaller ones work fine just not the large one
Hi Junk man, the front of my stove has drippings which are visible would you suggest separating the door and the glass to clean or would that cause serious problems. Please let me know. Thanks
Sure why not
if fan doesn't work AND oven doesn't get warm either, does fixing the fan solve both problems? If not, can you direct me to how to fix the heating elements?
No, the fan is a separate issue, however the heating elements are right there and just un-bolt.
spinning like a top!
On a Samsung convection range model ne595r1 can the convection fans be disconnected or bypassed for the oven to operate without convection?
Yes, I ran this oven with out the fans for a little while until I got the new fan installed.
@@thejunkman great thank you. Very easy to follow tutorial.
We check the fan motor with the Ohm meter and it read ok. Sure it is motor?
It could be the board not sending a signal to the motor, but that is easily checked with a volt meter.
Does a gas oven fan not working, mean that dangerous gas (carbon monoxide?) is leaking into my kitchen and home?
IsThat part Universal? I have an LRE3083ST
More or less. Its just an electric motor.
Why does this model have 3 fans? what is the advantage of that? Is it just air flow?
Yes it all has to do with air flow that's how a convection oven works
I don’t know if our fan has EVER worked. What do you do then?
Test and see if the fan leads get power.
I have the same oven., when turned on fan starts working for a few minutes, than shuts down and then will not come back on., help
Might be the same problem as seen here except your fans run long enough to then thermally shut down.
Is there a temperature sensor shutting fan down or is this fan running all the time while oven is on
Yes. There is a thermal switch on the back of the oven. It is there as also a safety for if the oven gets over a certain temp it trips and needs reset. However it wears out over time, especially if you use the self cleaning option a lot.
So I am uncertain what my problem is, fan or sensor.
Would you have a part number for fan, possibly for both?
Thanks
No I would not, or not handy. I use a site called RepairClinic to find my part numbers, then search the internet for the best price. I am not affiliated with that site in any way though.
My fan isn't working, but it spins freely. What would that be?
It could still be the fan. Test the leads when the oven is on.
@@thejunkman hey junkman, my leads aren't hot, when it is supposed to be on, i'm not sure where that line is coming from on the circuitboard, is there a diagram anywhere?
How i can test oven fan i dont know it not working
Turn the oven on, hit bake convection. If the fans starts spinning, it is working.
i just bought a home that has a Samsung oven and the fan is permanently "ON" blowing out of the front grill. How do i turn this off please?
Probably a relay is stuck in the "on" position. This may be on the board.
You might want to add what brand this stove is (???)
This is a Samsung, however this problem and even the parts span multiple brands and models.
Ok, we repair men appreciate it when you call out the brand in your videos. Other than that it was a good video
No "commontator" in that motor. Motors with comutators have brushes and will run on either AC or DC. That shaded pole induction motor will run on AC only.
Thanks for the tip!
It should matter which way the connectors go on as that would be the polarity of which way the fan spins
These are ac motors
part number?
"Commetators in the motor".... you mean bearings?
Nice video but the real problem = Samsung I'll never buy any of their appliances again
I have had this for almost 10 years before this fan gave out. I would say that is pretty good reliability.