5 Speed Bench Top Drill Press Assembly Harbor Freight Central Machinery Item
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Have you ever asked, Is the harbor freight drill press any good? How can harbor freight sell tools so cheap? Is the central machinery drill press any good? Harbor freight drill press reviews!
Central Machinery 5 speed drill press is assembled and reviewed in this video. See the Pros and Cons of this drill press. Check out Amazons drill presses they offer. And if it is an Amazon Prime item then it will ship for free. amzn.to/2JYKbtA
Amazon also has a great drill press made by WEN for under $80. See it with this link amzn.to/2HWOi7M
Bench mount drill press has 5 speeds and a built-in swivel lamp
Central Machinery - Item#60238
All-purpose bench mount drill press for the home or shop. Professional accessories include a built-in work light and tilt table. The bench mount drill press features an adjustable depth stop with gauge and formed steel base and head for optimal durability.
*Adjustable table locks in place
*A depth stop with gauge
*Cast iron base and head
*Table rotates 360° and tilts 45° left and right
*Heavy duty ball bearing motor
Support my channel by Visiting these links!
Nesco Dehydrator: amzn.to/3ZleI7p
Vacuum Marinade Tumbler: amzn.to/3Jd5wfs
Vans World Amazon Store: www.amazon.com/...
JerkyGent Subscription: bit.ly/3p8XCZk
Commercial Dehydrator: amzn.to/2L4gyYV
Vans World ETSY Shop: VansWorld.etsy.com
TubeBuddy: www.tubebuddy.c...
Contact me at:
vans1world@gmail.com
Van's world Merch
teespring.com/...
Some links maybe affiliate links in this video description.
#howto #diy #craft
I'm a 64 year old woman and tools are so intimidating for me. I just bought this drill press and got stuck at one part of putting it together. You just made this so easy for me! Thank you sooooo much!
You're a 64 year old woman, but you're also an awesome 64 year old woman. :)
I love harbor freight, they actually have amazing customer service and they have a great return policy. I got my large drill press from them and it runs like a champ
I’ve been using this one since October. It’s been great. I wish I had the tall one.
i broke the depth guage right off the bat when I started drilling i didnt realize it wasnt tight enough and slipped down and snapped right off not up like he says in the video. Also when i went to put the chuck on with the 2x4 it bent the plate your work sits on. You can see his flexing in the video and i had to use pennies to get it back to square. So i would maybe use a 4x4 standing up against the bottom plate so that doesnt happen. As soon as i get a chance im gonna weld up a new plate. buyer beware. all in all i was able to accomplish my task and its held up pretty good other wise. Great video
I’m glad I watched this because the manual had me put the pivot on the wrong side.
I’m telling ya. Harbor freight needs to make instructional videos on their products. They’d definitely get a whole lot of views. Lol
Props for the heads up on the plastic part too
To prevent table damage, swing it out of the way, retract the jaws and install the chuck with a plastic face mallet or a hammer and block.
Thanks for making the video. I couldn’t understand what the directions were telling me when attaching the chuck.
No problem. Enjoy that drill press. It’s a great addition to your shop. 😁👍
@@VansWorld I’ve never owned a drill press. Might be a basic question but do people use vices to hold the wood down they are drilling holes on.
I see the drill press has 2 slots where you put what you’re drilling into. Is there specific clamps used in there
Couldn't for the life of me figure out how to install the chuck. I couldn't find it in the instructions.... Your video was a life saver! Thank you sir!!!
When installing the chuck, the force of me pushing down broke the welds on the support table. Awesome
Thanks. I couldn’t figure out how to attach the chuck.
Genius! I bought the 10" one last week and got most of the assembly done, but the chuck was like THIS CAN'T be just pressed onto the spindle like that w/ nothing holding it, and couldn't figure out how to put that belt housing handle on. Thanks so much!
Awesome. Your welcome. But your right. It doesn’t seem possible for the chuck to stay in there so easily.
I’m going to get one should work fine for the small projects I have. Thanks for review
No problem. It’s a great drill press. 😁👍
Just bought one and needed a little help installing. Thank you.
Glad I could help
Just got one for Christmas and tried to install and was having problems getting the top on. Even with the set screws out and using a mallet, I couldn’t get it all the way on. I watched your video and it just slid on perfectly. I’ll return it and try another one. Appreciate the detailed video to confirm my suspicions.
👍😁 I hope your next one is better.
I found that after putting the check on that it bent my plate a little bit
Hmm I’ll check mine to see if it’s out of level.
How much pressure is needed to set the chuck? I also saw the plate bending. I may try to support the plate with a piece of 2x4 if it takes significant pressure.
Thanks for the video. The drill press is decent for the price. I couldn’t expect more for what I paid. No matter what you buy there is always a better model somewhere but I like this one for now.
Thank you so much. I Love my new tool and I really appreciate you taking the time to make this video
My chuck wobbles is put it on same way you did
Thank you for all the information I just got one too and needed help with the chuck install and the belt set up helped a lot as well as I didn’t know about the difference between top and bottom set up for steel drilling thank you so much I really appreciate it
Glad it helped
Your vid is clear, step-by-step and presented in a calm pleasing manner. Thank you!
Awesome thank You!
Hey have you looked at jerky subscriptions? I just subscribed to one that sends different jerky from all over the USA to try. Click this link to check it out. bit.ly/3p8XCZk
Thank You for your comment and for watching
Thank you for taking the time to explain so well how to set this drill up!
Appreciate you taking the time to make this video. It was very helpful for me not ever using a drill press. Only thing I still am unsure about is operating the depth apparatus. Would have been great to see you actually set it and use it a time or two. I still don’t understand how the numbers will help me at all, cause when I start to lower the drill it doesn’t contact the material for a given distance and the numbers are then irrelevant. Like I said , never used a drill press before and I’m just now diving into the DIY/engineering/tool life, got tired of having to rely on a particular mans’ time schedule to get small projects done . So I will do them myself 💪🏼 😎
Very efficient video. It gets right down to how to do it without a lot of excessive talk
Thanks man, just installed mine. The chuck had me worried but I got it.
Lol. The chuck had me worried too. I thought this thing is gonna fly off here or wobble. It’s a handy thing to have around. 👍😁
I assembled my machine today thanks to you my friend! I really appreciate it(:
My pleasure. I appreciate you. 👍😁
Hey man thanks so much just got this tool I think I can put it together now👍🏻
I just love the help you've given me with these videos! I bought and used the spray painter and it worked great. Do you think this drill press is OK for use on porcelain and ceramic plates?
It should since it has multiple speeds. Thanks for the kind words and for watching 👍😁
That cheesy plastic depth stop busted the first time I looked at it funny. After it broke into three pieces, I told it a few things about its momma.
After a lot of poking around the internet looking at dozens of replacements, NONE of which would fit, I finally found some dude in Texas who makes and sells a machined (or maybe 3D printed) aluminum part for $35. Installed one on mine and it works just fine.
This was very helpful. Next time please show how to use the tilt function. thank you.
Ok. Sure will. Thank you 😁👍
The user manual says to bolt the base to something solid FIRST STEP for safety.
I thought the chuck had to go all the way up! 🤦♂️
Thanks for the video!
You bet
Nice was going to grab one, thanks for the video
Pretty good investment.
Do the stock handles unscrew from the rods, or are they glued on?
Very informational video and really on point you did a great job thank you
You should use a lubricant for drilling through metal. Simple dish soap will do and make less of a mess than oil
Your handle is 'Trump News Network', and you have a thumbnail showing the numbers 45 on top and 47 below.
Trump will never be president again. You can forget about that ever happening again, and maybe you can move on with your life. It's better for you now, and more so in 2024.
@@paulraymond1804 After a year and a half of Biden in the White House Mickey Mouse could get elected president. I'm sorry about your TDS and liberalism. Both are pretty scary mental disorders and it must make your life very hard. Keep going to therapy and take your meds when you're supposed to. I know there isn't a cure available right now but there is always hope. Good luck and God bless.
@@thetrumpnewsnetwork7503 I don't live in America, idiot. 😄
Hey any advice for drilling through glass
Awesome video, you helped me set this thing up, never used one before, thank you for doing this!
I have that was given to me with out the chuck. Where can I buy that separately?
The video was awesome. I loved the "better whoa"! I read the previous comments and feel the same way about the chuck. Is it supposed to go all the way to the top? cuz if so mine doesn't. My son helped with that and was really putting the pressure to it when better whoa came out of my mouth.
I haven't tried to use it yet....buying drill bits next.
Thanks!
It’s a great tool to have around for sure. Especially if a straight hole is needed. I used mine last year to drill 45 degree holes into blocks of 4”x4” to make carpenter bee traps. It made the process 100% better. 👍😁
I just assembled mine and I can't for the life of me understand how the chuck is able to stay on. You literally just press it down. I still can't figure out how it stays in place. Does anyone know?
Excellent video. Bought one last week works just like you said.
I wish I’d gotten the taller one. Lol. Thanks for the feedback and for watching 😁👍
ihank you your video was very helpful
Glad it was helpful!
My husband likes harbor freight they have pretty good prices there
They really do. Great place. How ya been? I hope your feeling better
Thanks for making this video - helped me get mine setup!
Hey just got mine fired up to try for first time an I notice there’s quiet a wobble when I turned it on what should I do? Maybe I dident put enough pressure installing the chuck if so how do I get it off to redo? Really excited to use pretty bummed out I’m sitting here so seeking advice
Thanks for the video.it really helped me put it together.
No problem. Thank you for watching and leaving a comment 👍😁
Iv watched two videos now and everyone's machine is so quiet. Mines super loud and rumbly. Does anyone have any ideas why?
Your chuck could be loose.
Is it fixed or does it still make a noise?
Hey have you looked at jerky subscriptions? I just subscribed to one that sends different jerky from all over the USA to try. Click this link to check it out. bit.ly/3p8XCZk
Thank You for your comment and for watching
Nice video thanks ..
👍😁
Good to see you Van I hope all is well up your way my friend awesome video take care
Every thing is great here in Georgia. We need to meet up some time Berg
Thank you, you got right to business, good job.
Appreciate it 👍😁
Great video , great explanations..bad audio quality .. but great job,truly a wonderful video
Thanks for the feedback. I’m upgrading my camera and I’m going to an iMac computer for better editing quality. I hope lol. Hopefully the future videos will be lots better.
@@VansWorld I look forward to it ...you have def got my sub
👍😁
My table won't lock the same model
Thanks so much! This was super helpful!
Awesome. Thanks for the feedback 👍😁
Thank you for the info.
Great video thanks
I just got mine and it Seems good for the price especially with the coupon, I wonder if the motor is supposed to run a little hot the way it does?
I haven’t noticed mine running hot. Not sure.
th-cam.com/video/6Xzu47eU3lo/w-d-xo.html yea I guess they do get Hot, this makes 3 that I know of doing it. Like one guy said that likes doing HF reviews - it's just one step up from a toy!
That was an awesome review. I don't know more than I did when this video started. Thanks for the share. You have a great weekend, my friend. ATB ~ Shirl
Thanks. Im sorry for the boring guy toy video lol. Is there anything you would want to see?
@@VansWorld I pass it on to my sons. I don't know of anything off hand. I watched it all...didn't understand it :-) but I still liked it. I have been with you for such a long time that whatever you put up, I watch. I may miss one once in a while but I do try to catch most of them. ♥
Your so sweet ☺️
@@VansWorld Not really :-)
😂 and humble
Great video!
Greaty video very helpful thanks!
👍😁 I’m still enjoying it. It was a great purchase
@@VansWorld I put mine together finally about two or three days ago and its a rugged little unit, thanks!
Thank you! This was very helpful in setting up my drill press.
Very helpful video man!
Looks awesome!!!
Thanks brother
ano ba ang # ng capcetor yan boss
Good vid.
My chuck just keeps falling off no matter how hard i do it
Take it back to harbor freight. There must be something wrong with the shaft
Thank you for doing this video. This helped me out a lot
Good unboxing bud
Thanks man. It’s been a good one so far. Been using it since October.
This must be an older generation because you missed some parts
anyone else receive a bent table?
Oh no. That sucks. Take it back. I think you have 30 days from the time you bought it. And you shouldn’t need a receipt. They can look it up by your phone number 👍😁
Great video. Thanx!
My pleasure. Thanks for taking the time to comment 👍😁