Mate, great video!!! Only to add that as of today (19th November 2021) I had to add "--enable_compute --uac" to the exe in order to run my GPU. Cheers and thank you!
Appreciate the comment and thanks for watching. Do stay tuned for improved content and feel free to reach out if you need any clarifications and guidance ..[т̲̲̅̅н̲̲̅̅є̲̲̅̅ ̲̲̅̅м̲̲̅̅i̲̲̅̅и̲̲̅̅i̲̲̅̅и̲̲̅̅g̲̲̅̅ ̲̲̅̅c̲̲̅̅н̲̲̅̅α̲̲̅̅м̲̲̅̅b̲̲̅̅є̲̲̅̅я̲̲̅̅ ̲̲̅̅@̲̲̅̅ ̲̲̅̅g̲̲̅̅м̲̲̅̅α̲̲̅̅i̲̲̅̅|̲̲̅̅•̲̲̅̅]
@Gary Oak Thanks, i figured it all out now. Went with nicehash because im only using a vega56 and they pay out every 4 hours so i don't have to wait a month to see a payout
Thanks for this! Covered everything so well. Are you advising to run this "as is" and then do all of the OC settings via software (Afterburner, etc)? I'm a bit confused if it's better to find best settings and add to config, or if it's equal to just leave the miner "as is" and use Afterburner or AMD OC for tweaking. Same results with either? Or is one better idea? Thanks!
Thank you! Either way is fine, in the bat file it's better but from what I've seen in teamredminer it does not support that unfortunately unless I missed it! It only shows fan control options but not overclock options
@@MiningChamber Hi,If i use this miner for my 4gb amd rx570 armor cards and bios modded my gpu with polaris what sort of mh/s do you think i might hit?..Around 35 maybe or is that aiming the bar too high.
THanks your help, much appreciated. I want to ask something that you have mentioned Hyper x from windows? 17:19 into the clip, how did you set them up like that? Many thanks in advance.
Followed your instructions and the command prompt just shows the content of the start.eth notepad document but doesn't actually start mining like yours does in the video? I know I replaced the info with my wallet and changed it to US 1 server correctly as well so I'm confused. Using a 6600 XT
Super super helpful. Thank you. Question - I'm mining with a 4GB RX-580, using Kapow to mine Ravencoin. Do I need to set those 4GB card options? (set GPU_MAX_ALLOC_PERCENT=100 set GPU_SINGLE_ALLOC_PERCENT=100 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1) I assume because Kapow/Ravencoin is "4GB video card friendly", that I do NOT? Correct? Thanks...
hey great explanation, i edited the file did everything but upon starting the file for eth it immediately crashes. The command window closes so fast i can't read the error..if there is one edit: took out my camera and started recording to see if i could get a glimpse at what the error was. All i got was "failed to list OpenLL p(something that i can't read right)" edit: got it, it says "Failed to list OpenCL platforms"... what is this? and how do i fix it?
Hey facing an error in teamredminer, Warning: Windows TDR delay value is missing or invalid Warning: Windows TDR DDI delay value is missing or invalid It says it can be fixed but there is a small risk of killing the GPU, I really dont want that to happen. Any solution?
If you have the monitor connected directly to the GPU it shows that error but if you remove the monitor and have your display come out of your motherboard then youl be fine!
Hello good sir, I have a question for you. I own a RX 590 and my card mines better when the memory timing set to 2. Yet, when I typed down the correct lines to the bat file (--clk_timing=2) it doesn't set the correct values, instead I need to do it manually from Radeon Software. So, question: How can I make the bat file to override memory timings?
Thank you Mining Chamber. Started with my first Rx 580. Tried Phoenix first and now TRM. Get "incorrect share from GPU" the whole time. Have lowered my overclocking but still doesn't work. Any help will be appreciated
I did everything according to this video with my rx590 which should give me around 35Mh/s but I only get around 10 and my GPU isn't even working according to task manager, what should I do?
I do the same like he does in video and its still says conection timed out/failed. I dont know what to do. I did not fix it even after week. Did not find solution on redit. Wifi/cable, nothing helped. Any ideas please??
Question someone plz reply i am getting 5.8mhs on kawpow (ravencoin) on rx 560 4gb on my PC compute mode is already on and when i start the miner, it says that its is a single gpu and has a display connected so we will mine at low intensity to make space for rendering which i really dont want how can i increase the intensity? can someone please guide me!?
I did through the command prompt with my RX 5700 XT. Just can’t get watchdog to execute when the GPU hangs, it just keeps accepting jobs and no GPU info. Left it stock and tried to alter it a bit and I get the same results.
Question... at the end of my ETH start batch file do I just have to add --watchdog_script(=X) at the end to get the watchdog script to work or do I have to change anything? im having troubles getting it to work when i do this ... it says i down have it set up.
Hey Bro! really appreciate your work and way of explaining things. Thank you for providing such content. Bro can you kindly tell that does PCIe generation or their x number effects mining? Motherboards have different gen PCIe slots along with various lane size x1/x4/x8/x16 so does this effect mining/hash rate. Also do we need to check CPU lanes available like 28 lanes or 40 lanes? And thank you for making detailed guide for GPU mining. It is really very helpful.
For AMD cards only? I would only go with TRM, Phoenix is not bad, there is also Aquilex which is free and you can find that in my discord server link in description
I used lolminer with my AMD cards for about a month on different coins with ETHASH and ECTHASH pointing to Unmineable. It works great--and it's on my gaming PC so I can use my PC while mining still with about a 26 MH/s rate on each card(dual mining a rx580 and an rx480). I'm about to try Team Redminer to compare for the next month.
Heeh man, i have 1 rx5600xt gb in windows mining along with 2x rx580 8gb i want to make one bat file for RMODE on the 5600xt only. how can is specify these settings in one bat file for every device diff settings? i cant find it on the net. i also have a hive os rig. thats easy but on my pc i need a custom written bat file.
I tried to add a 5700xt to my rig but everytime I try to reboot the system the Hive OS network won't connect to the rig. It says "start job is running (no limit)" If I disconnect the 5700xt the rig will reconnect to Hive OS. Does anyone have any information on what I can do to fix this?
I need more help with this man can I mind cheaper you know on team redminer just team red minor itself? And I've been fighting with him for almost a week now just trying to get them to even stay on or stay stable and I know team red Miner helps cuz I tried out to etchash.
Appreciate the comment and thanks for watching. Do stay tuned for improved content and feel free to reach out if you need any clarifications and guidance ..[т̲̲̅̅н̲̲̅̅є̲̲̅̅ ̲̲̅̅м̲̲̅̅i̲̲̅̅и̲̲̅̅i̲̲̅̅и̲̲̅̅g̲̲̅̅ ̲̲̅̅c̲̲̅̅н̲̲̅̅α̲̲̅̅м̲̲̅̅b̲̲̅̅є̲̲̅̅я̲̲̅̅ ̲̲̅̅@̲̲̅̅ ̲̲̅̅g̲̲̅̅м̲̲̅̅α̲̲̅̅i̲̲̅̅|̲̲̅̅•̲̲̅̅]
Man can someone help me configure so I can mine Shiba Inu on team red Miner like I have to see it literally written down so I can figure this s*** out cuz it's driving me nuts
Brother Can u please make a video about all the software stuffs together. I mean like.... 1. How to install the window 2. How to connect it with your laptop 3. How to run the mining software and start mining. 4. Wher my mined coin will be stored and how to sell it. 5.
Hi.. its much better if your next content could have text like a subtittle.. alot i guess english is not very well like me,😁 and sometimes u talk fast and cant hear clearly what u mean.. thank you
The newly written guide is now out! miningchamber.com/gpu-mining/teamredminer-tutorial/
It's because of this channel I started mining. Now the PC I built for gaming is already payed off.
how much time did it take to pay it off? and how is your video card working after that? did you change thermal paste on it?
@@adpraeter9403 3 months. Working just fine, still gaming still mining. No termal changes needed so far.
Mate, great video!!!
Only to add that as of today (19th November 2021) I had to add "--enable_compute --uac" to the exe in order to run my GPU. Cheers and thank you!
best video on mining in general I've ran into yet
Appreciate the comment and thanks for watching. Do stay tuned for improved content and feel free to reach out if you need any clarifications and guidance
..[т̲̲̅̅н̲̲̅̅є̲̲̅̅ ̲̲̅̅м̲̲̅̅i̲̲̅̅и̲̲̅̅i̲̲̅̅и̲̲̅̅g̲̲̅̅ ̲̲̅̅c̲̲̅̅н̲̲̅̅α̲̲̅̅м̲̲̅̅b̲̲̅̅є̲̲̅̅я̲̲̅̅ ̲̲̅̅@̲̲̅̅ ̲̲̅̅g̲̲̅̅м̲̲̅̅α̲̲̅̅i̲̲̅̅|̲̲̅̅•̲̲̅̅]
Zil Ethereum baby lets go! Team red miner is the best thing that has ever happened to me
Whats the minimum payout on plain eth is it time based or can i edit the minimum payout in a certain file cheers 👍
Amazing video. So much detail, thanks!
Help! when does TRM payout and whats the minimum payout?
Also can i be paid BTC when ETH or does it only pay you in what you were mining?
@Gary Oak Thanks, i figured it all out now.
Went with nicehash because im only using a vega56 and they pay out every 4 hours so i don't have to wait a month to see a payout
Thanks for this! Covered everything so well. Are you advising to run this "as is" and then do all of the OC settings via software (Afterburner, etc)? I'm a bit confused if it's better to find best settings and add to config, or if it's equal to just leave the miner "as is" and use Afterburner or AMD OC for tweaking. Same results with either? Or is one better idea? Thanks!
Thank you! Either way is fine, in the bat file it's better but from what I've seen in teamredminer it does not support that unfortunately unless I missed it! It only shows fan control options but not overclock options
@@davidcooley275 money goes into the pool wallet and pays out after certain thresholds. check the pool you're mining under.
@@MiningChamber Hi,If i use this miner for my 4gb amd rx570 armor cards and bios modded my gpu with polaris what sort of mh/s do you think i might hit?..Around 35 maybe or is that aiming the bar too high.
Good video bro, keep up with the good work
Finished making my mining rig with a Red Devil 13 r9 390x2. Hoping to make a fully optimized mining rig for AMD cards.
How do you check your profit whilst mining using an exodus wallet?
What about being able to check jobs completed from mining?
THanks your help, much appreciated. I want to ask something that you have mentioned Hyper x from windows? 17:19 into the clip, how did you set them up like that? Many thanks in advance.
Followed your instructions and the command prompt just shows the content of the start.eth notepad document but doesn't actually start mining like yours does in the video? I know I replaced the info with my wallet and changed it to US 1 server correctly as well so I'm confused. Using a 6600 XT
how often does it pay out to my ETH address?
Super super helpful. Thank you. Question - I'm mining with a 4GB RX-580, using Kapow to mine Ravencoin. Do I need to set those 4GB card options? (set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100 set GPU_MAX_HEAP_SIZE=100 set GPU_USE_SYNC_OBJECTS=1) I assume because Kapow/Ravencoin is "4GB video card friendly", that I do NOT? Correct? Thanks...
Great video! My favourite is trex miner
love watching all your videos a lot of info and to learned.
Binance Pool does not see my AMD rig name with commands --eth_worker or --ethrig_id. It sees it under name __default___. How to change that?
Is there any way to get rid of the lag of the system while mining with TRM? 5600x+32GB RAM+6900XT
hey great explanation, i edited the file did everything but upon starting the file for eth it immediately crashes. The command window closes so fast i can't read the error..if there is one
edit: took out my camera and started recording to see if i could get a glimpse at what the error was. All i got was "failed to list OpenLL p(something that i can't read right)"
edit: got it, it says "Failed to list OpenCL platforms"... what is this? and how do i fix it?
i have the same problem
Hi tq for informative video, 1 question, how to boost my rx480 8gb with teamredminer? Now my hashrate only 26MH/s
Hey facing an error in teamredminer,
Warning: Windows TDR delay value is missing or invalid
Warning: Windows TDR DDI delay value is missing or invalid
It says it can be fixed but there is a small risk of killing the GPU, I really dont want that to happen.
Any solution?
i have the same error
If you have the monitor connected directly to the GPU it shows that error but if you remove the monitor and have your display come out of your motherboard then youl be fine!
@@MiningChamber Dint work😔
......
Do you have the parameter for auto increase fan speed when the temp hit to certain degree?
Hello good sir, I have a question for you.
I own a RX 590 and my card mines better when the memory timing set to 2. Yet, when I typed down the correct lines to the bat file (--clk_timing=2) it doesn't set the correct values, instead I need to do it manually from Radeon Software.
So, question: How can I make the bat file to override memory timings?
Thank you Mining Chamber. Started with my first Rx 580. Tried Phoenix first and now TRM. Get "incorrect share from GPU" the whole time. Have lowered my overclocking but still doesn't work. Any help will be appreciated
I did everything according to this video with my rx590 which should give me around 35Mh/s but I only get around 10 and my GPU isn't even working according to task manager, what should I do?
I found more stable the SRBMiner for AMD cards. I think TRM does not fully support RX 6000 series like SRB does.
I noticed that SRBMiner is a good option for ergo farming too
I am trying to use this problem but for some reason, I get some error messages but it just closed after that... Not sure how to fix it...
O tried using the command before like you show although it doesn't work? I don't use it and it works
This is for cloud or hardware?
I need a solution for this "warning - gpu 0 could not be mapped to adl, will not have monitor."
hi do you know how to get log ? I put command-line on bat file like this"--log_file" but couldn't ....
So if i've got a normal pc with a 4gb graphyc card (only one) i can start mining eth with this program??
I do the same like he does in video and its still says conection timed out/failed. I dont know what to do. I did not fix it even after week. Did not find solution on redit. Wifi/cable, nothing helped. Any ideas please??
Ive never mined with AMD before. I put my cold storage in for wallet. Will my pay outs just go to that wallet? And how often are pay outs.PLEASE HELP
Hi. A Pool is asking for the Team Red Miner log files. Where can I find that?
Question
someone plz reply
i am getting 5.8mhs on kawpow (ravencoin) on rx 560 4gb on my PC
compute mode is already on
and
when i start the miner, it says that its is a single gpu and has a display connected so we will mine at low intensity to make space for rendering which i really dont want
how can i increase the intensity? can someone please guide me!?
Can you use the GPU for mining and the integrated GPU for the monitor?
do i need enable compute for my rx 5700xt ??
I did through the command prompt with my RX 5700 XT. Just can’t get watchdog to execute when the GPU hangs, it just keeps accepting jobs and no GPU info. Left it stock and tried to alter it a bit and I get the same results.
Question... at the end of my ETH start batch file do I just have to add --watchdog_script(=X) at the end to get the watchdog script to work or do I have to change anything? im having troubles getting it to work when i do this ... it says i down have it set up.
Hey Bro! really appreciate your work and way of explaining things.
Thank you for providing such content. Bro can you kindly tell that does PCIe generation or their x number effects mining? Motherboards have different gen PCIe slots along with various lane size x1/x4/x8/x16 so does this effect mining/hash rate.
Also do we need to check CPU lanes available like 28 lanes or 40 lanes?
And thank you for making detailed guide for GPU mining. It is really very helpful.
Hey bro it's a pleasure! You don't need to worry about the pcie lanes speed, running off if x1 is fine for mining unless it's an RTX 3060
@@MiningChamber Thank you bro for replying and providing guidance. Highly appreciate it !!!
Keep up the good work !!! ☺️
Hello, is there a command to lower the intensity of mining? since in windows 11 I have lag when I maximize or minimize a window, please, thank you
what miner after TRM do you recommend for AMD ? thanks for the video
For AMD cards only? I would only go with TRM, Phoenix is not bad, there is also Aquilex which is free and you can find that in my discord server link in description
@@MiningChamber Phoenix is bad sorry to say that, TRM & nanominer are good for amd cards
I used lolminer with my AMD cards for about a month on different coins with ETHASH and ECTHASH pointing to Unmineable. It works great--and it's on my gaming PC so I can use my PC while mining still with about a 26 MH/s rate on each card(dual mining a rx580 and an rx480). I'm about to try Team Redminer to compare for the next month.
@@droptozro how is trm for ur rx 580? I get 22mh but it’s not finding any pools?
Thank you!
it says "GPU 0 could not be mapped to ADL, will not have monitor" help lol
Ive looked at all your rx5700xt videos and I cannooot get one of my 4 cards stable. Any help? Its an asus rog
How do i know when i did it properly if i go to run start eth file and it opens and immediately disappears?
Heeh man, i have 1 rx5600xt gb in windows mining along with 2x rx580 8gb i want to make one bat file for RMODE on the 5600xt only. how can is specify these settings in one bat file for every device diff settings? i cant find it on the net. i also have a hive os rig. thats easy but on my pc i need a custom written bat file.
Thanks a lot 👌👍🌹
Hello everyone, is there any way to limit the gpu usage with some command or something similar? i mean the trm only use 80% of my gpu instead 100%?
Whyy does my hash rat get cut in half no matter what miner I use when mining reven. Coin.. Using rtx 3060 rug trio.. Everything else I get over. 48mh
Ravencoin is a different algorithm. Hashrates are different for different algos
@@MiningChamber thanks.. But from 49mh to 19mh that's crazy
Mine immidiately closed when I open it. Any Suggestion?
I am new to this.... The setup was very easy. My rx 570 4gb is mining at 220,1 kh/s is that okay?
Hi so I have 5700xt 8Gb, should I pick ETH or ETH 4GB? what is diffrent between these 2?
pick start eth, you cant mine eth with 4gb graphics card anymore
It is highly requested to make a video on TRex miner.
Thanks so much.
Neeb question.... Where/how do you see what you are earning?
could you make a video about amdmemtweak and --ref 20/30 values for polaris? thanks!
So what case do you use for your main pc
Thermaltake core p3
when i open my minner, open and close by itself what is the problem? XD
I get a windows tdr error when i open the miner, is this a problem?
Ironically, TeamRedMiner won't recognize my Hawaii card. RIP.
Hey man what's the best mining software for nvidia rtx 3070
Trex
@@MiningChamber thanks man
I tried to add a 5700xt to my rig but everytime I try to reboot the system the Hive OS network won't connect to the rig. It says "start job is running (no limit)" If I disconnect the 5700xt the rig will reconnect to Hive OS. Does anyone have any information on what I can do to fix this?
Try to check your motherboard bios settings and make sure 4g decoding is on, I have a video on that which you will find from the recent videos
how to you see how many shares your getting
I could only make my 5700xt to go 55mh/s by adding the comand line --eth_config=B608 so play around with it
is crypto going to even be profitable anymore? i just bought gpus but i feel like i should sell them? and take the loss before i lose more
Watch my latest video on it it should give you a good idea
File of star_eth closes after changes, why?
What does the a: r: hw: mean next to the hashrate?
Can i add any cryptocurrency wallet
do you know how i set a intensity?
GOD
How often does team red miner payout?
Thx a bunch bro ☺️
Sam 🎵✌🏻
Pleasure!
ohh, I'm "Ms"
sorry, should've told u earlier ☺️
Thx again :))
@@captivator13 Oh sorry!! it is my mistake >.
@@MiningChamber
No worries friend ☺️
Will these hardware be useful when eth2 launch?
Eth 2.0 video coming out in a day or two
Can you use this with AMD and Nvidia cards together?
Like I mention in the video it's only for AMD cards. You can run Trex with it
6 months later: Ethereum hasn't switched yet to PoS and will probably switch in summer 2022 😂
probably wont switch to PoS for several months or years, if at all
how to use the proxy in this miner？
I need more help with this man can I mind cheaper you know on team redminer just team red minor itself? And I've been fighting with him for almost a week now just trying to get them to even stay on or stay stable and I know team red Miner helps cuz I tried out to etchash.
What is your opinion on cudo miner vs kryptex?
Both are basically the same. I've seen alot of server issues with Kryptex so Cudo might be better
@@MiningChamber Thanks for the reply my man!
How do i find the ip address of my miner?
How to mine ERG Coin Sir?
cant connect to pool host please help
anyone here use this with an RX 580 card? I am trying to configure it to work with miningpoolhub.. can someone help me please
Thank
Appreciate the comment and thanks for watching. Do stay tuned for improved content and feel free to reach out if you need any clarifications and guidance
..[т̲̲̅̅н̲̲̅̅є̲̲̅̅ ̲̲̅̅м̲̲̅̅i̲̲̅̅и̲̲̅̅i̲̲̅̅и̲̲̅̅g̲̲̅̅ ̲̲̅̅c̲̲̅̅н̲̲̅̅α̲̲̅̅м̲̲̅̅b̲̲̅̅є̲̲̅̅я̲̲̅̅ ̲̲̅̅@̲̲̅̅ ̲̲̅̅g̲̲̅̅м̲̲̅̅α̲̲̅̅i̲̲̅̅|̲̲̅̅•̲̲̅̅]
Man can someone help me configure so I can mine Shiba Inu on team red Miner like I have to see it literally written down so I can figure this s*** out cuz it's driving me nuts
Or can I only do it on Phoenix minor and NB minor to get Sheba and payment I'm just trying to get my final payment
I switched from teamred to lolminer and increased my hashrate only because teamred kept crashing 🤔
I have to check out Lolminer !
Can't mining all red warning coming up
I added 2nd gpu and team red miner crashes at startup!!
Double check overclocks for that second gpu
@@MiningChamber I just installed latest TRm and it works from start!
pool have 0h/s plz help
Brother Can u please make a video about all the software stuffs together.
I mean like....
1. How to install the window
2. How to connect it with your laptop
3. How to run the mining software and start mining.
4. Wher my mined coin will be stored and how to sell it.
5.
why are you so quiet i have to bLAST MY VOL TO HEAR YOU
It sounds loud on mine that's weird maybe check your sound mixer settings
Sounds normal to me
Hi.. its much better if your next content could have text like a subtittle.. alot i guess english is not very well like me,😁 and sometimes u talk fast and cant hear clearly what u mean.. thank you
It's not I get less hashrate with this miner
SRBMiner?
I'll make a guide on it soon!
1 st View
⭐⭐⭐⭐⭐
2
Stop the fake comments
its obvious and makes you untrustworthy..
time waster