great talent. I would have been more helpful without the music but I got the gist of it. I would have liked to have seen the products used and the amounts would have been helpful as well.
Thanks for taking the time to make this video and post it. Very informative, beautiful craftsmanship. I learned several things about the process I hadn't known before. Thank you !
COuld you give us some tips on the plaster ? ...... how much time did it took to harden ? ..I feel like it hardens so fast and when I try to create the plaster form it rips out and have little holes all around the liniar border made from 100%plaster with water .... Thanks in advance
Thank you very much for this video. It's very helpful. One suggestion for future videos is to lower the music volume in your mix. It's difficult to hear you. Other than that, fantastic video!
I have been working with this for 20 years. In Russia, they do it differently: they make the part on the table, then mount it to the surface. For manufacturing use high-strength plaster. What is shown in the video, called "broach in place," this method is not qualitatively done. There are also pluses- it is not necessary to mount. In any case, it's nice to see the work of a professional!
the advantage of this technique is also a stronger adhesion to the building surface. I much prefer molding on a table, but sometimes it makes more sense to work directly on the wall or ceiling. for the type of mold he's using, I would prefer the table for sure though.
@@timothyhofmeister1832 After manufacturing on the table, the product is glued with special glue, the adhesion is very good. If it becomes necessary to remove the product, it will be very difficult to do)) In my practice, the need for manufacturing on walls and ceilings was very rare. Usually these are curved walls with a non-constant radius. Although even in this case, you can make a wall template and do everything on the table. I made many different products: columns (with canillures, with entasis), cornices, moldings (including radius and oval), etc. By the way, hello to you, colleague)
@@user-lg1un6mj6t it's nice to hear from a colleague from elsewhere. Are you from Russia? It's very rare for us to run anything directly on the wall. I personally have never done it except for school where we learn some older techniques that aren't commonly used. I work in Stuttgart, Germany, so there isn't too much plaster molding here. In Berlin they have a lot of it. Very large church ceilings or the inside edge of a large dome of a government building are two examples of where one might work directly on the surface. with a radius of 5 or 10 meters, you can't pull it on the table, so it's done directly on the ceiling. I believe this type of work is often done differently in every country. I'm still a student of plastering with only 4 years work experience, but I've done a lot of extra research at my vocational school. I plan to try making my own youtube videos in the future for plastering. if you ever make a video, I'd love to see how you do things in Russia. Have a nice day.
@@timothyhofmeister1832 Hello again! Yes I am from Russia). To be more precise, I'm from St. Petersburg. There is a lot of plaster molding here, so I have a lot of experience). And you are from Germany. Actually, it’s not far away) I studied German at school, though I don’t remember anything now. Only some words and phrases (Guten Tag! Ich heise Leonid. Ich lebe in Sankt-Petersburg. Ich habe 40 yare alt))). You say you can't make parts with a diameter of 5-10 meters on the table? You can do) And I did such. If you start your own channel on TH-cam, I will definitely subscribe to it, it is interesting to see how colleagues from Germany work. I don't have my own videos, because usually I work alone and there is no one to shoot videos. But if it does, I'll post it.
Excellent, although I don't get why you mix some plaster then make the circle and add water and then more plaster but allow to sink before mixing? Why not just mix it all at once?
Hi John. I didn't quite get what all the materials used were.What was the plaster mix you initially put on the table from which you made a well? Did you use pure water and casting plaster for the well centre. Was any retarder used?
Both are valid traditional techniques. If it's just a straightforward escutcheon, it's easier to do it in-situ because it requires fewer tools and can be done in one day, whereas a more complicated design with sculptural detail would need a mold. Furthermore, in-situ plaster work can achieve concave profiles more easily.
Putty Lime is created when natural rock is broken up and added to water. It is then referred to as Quicklime which burns.( I know first hand I was unfortunate to slip and fall into a lime pit when serving my time as a plasterer back in the sixties.) The Quicklime is left too cool for several weeks until it forms a putty, Which was used for both plastering and bricklaying. hope that answers your question. ps you can use hydrated lime make sure it is the type for plasterwork just soak it in a drum or bucket for a couple of weeks and it will form a putty which you then have to put through a fine sieve.
james f o'hare Intereasting, thank you for the info ...and how aproximative is the raport on hydrated lime and water ? 50-50 ? or ? So that I understand it carefully .... hidrated lime is Calcium oxide (CaO) ????because in my native language it has another name and Im not sure if its the same material. Thanks once again you are awesome !!!
I got taught this when I started out and we would have made this on the bench ,100 times easier!! And then marked it out and fixed to ceiling, don’t see why you would do it upside down , pointless
If it was a renovation of a part it would be necessary to do it directly on the ceiling. But you are tired of nothing. This method is not worth doing on the ceiling. Why not do it on the floor or on a table? You have the diameter and so simple...
...and who thought it was a good idea to put that horrible music over this video? I couldn't understand a word that was said, so I learned absolutely nothing.
The ambience music is steamrolling over everything. I can not hear a word the guy is saying.
Good to see real craftsman still exist. Amazing work
One of the best plaster videos I have ever seen. Beautiful work Enzo.
great talent. I would have been more helpful without the music but I got the gist of it. I would have liked to have seen the products used and the amounts would have been helpful as well.
Thanks for taking the time to make this video and post it. Very informative, beautiful craftsmanship. I learned several things about the process I hadn't known before. Thank you !
Lorenzo is a good craftsman, bit scared for his lectrical skills, I was thinking that bulb was going to explode! Lorenzo!
Good job mate haven't seen that since I was kid watching my dad.
I have done many times my favorite thing to do have run them as big as 12’ with smaller ones inside Great video
I use to make those!!!! I made my own jig with a drywall trowel and I used Excalibur one coat plaster! You do some beautiful work!!!!!
COuld you give us some tips on the plaster ? ...... how much time did it took to harden ? ..I feel like it hardens so fast and when I try to create the plaster form it rips out and have little holes all around the liniar border made from 100%plaster with water .... Thanks in advance
Now that was awesome very talented!
Beautiful job, wonderful to see this
I like your protection plastic setup around work place. Very profesional.
Good work Enzo
Thank you very much for this video. It's very helpful.
One suggestion for future videos is to lower the music volume in your mix. It's difficult to hear you. Other than that, fantastic video!
Thanks much appreciated.
I have been working with this for 20 years. In Russia, they do it differently: they make the part on the table, then mount it to the surface. For manufacturing use high-strength plaster. What is shown in the video, called "broach in place," this method is not qualitatively done. There are also pluses- it is not necessary to mount. In any case, it's nice to see the work of a professional!
the advantage of this technique is also a stronger adhesion to the building surface. I much prefer molding on a table, but sometimes it makes more sense to work directly on the wall or ceiling. for the type of mold he's using, I would prefer the table for sure though.
@@timothyhofmeister1832 After manufacturing on the table, the product is glued with special glue, the adhesion is very good. If it becomes necessary to remove the product, it will be very difficult to do)) In my practice, the need for manufacturing on walls and ceilings was very rare. Usually these are curved walls with a non-constant radius. Although even in this case, you can make a wall template and do everything on the table. I made many different products: columns (with canillures, with entasis), cornices, moldings (including radius and oval), etc. By the way, hello to you, colleague)
@@user-lg1un6mj6t it's nice to hear from a colleague from elsewhere. Are you from Russia? It's very rare for us to run anything directly on the wall. I personally have never done it except for school where we learn some older techniques that aren't commonly used. I work in Stuttgart, Germany, so there isn't too much plaster molding here. In Berlin they have a lot of it. Very large church ceilings or the inside edge of a large dome of a government building are two examples of where one might work directly on the surface. with a radius of 5 or 10 meters, you can't pull it on the table, so it's done directly on the ceiling. I believe this type of work is often done differently in every country. I'm still a student of plastering with only 4 years work experience, but I've done a lot of extra research at my vocational school. I plan to try making my own youtube videos in the future for plastering. if you ever make a video, I'd love to see how you do things in Russia. Have a nice day.
@@timothyhofmeister1832 Hello again! Yes I am from Russia). To be more precise, I'm from St. Petersburg. There is a lot of plaster molding here, so I have a lot of experience). And you are from Germany. Actually, it’s not far away) I studied German at school, though I don’t remember anything now. Only some words and phrases (Guten Tag! Ich heise Leonid. Ich lebe in Sankt-Petersburg. Ich habe 40 yare alt))). You say you can't make parts with a diameter of 5-10 meters on the table? You can do) And I did such. If you start your own channel on TH-cam, I will definitely subscribe to it, it is interesting to see how colleagues from Germany work. I don't have my own videos, because usually I work alone and there is no one to shoot videos. But if it does, I'll post it.
Must work in Hollywood, turns music volume up so loud you can't hear the dialog at ALL.
Brill to watch but easyer to buy a mold and plonk it up
Brilliant mate,🕯☕️🚬🇬🇧
Gotta keep building up the plaster since you can't put the whole glob on at once
Wunderschön....mit viel Handwerker Liebe gemacht..Gratulation..Michael M. Stuckateur Meister
Nice ...
Excellent, although I don't get why you mix some plaster then make the circle and add water and then more plaster but allow to sink before mixing? Why not just mix it all at once?
Respect
Great
Would have been better without the music, it was hard to hear you
Hi John. I didn't quite get what all the materials used were.What was the plaster mix you initially put on the table from which you made a well? Did you use pure water and casting plaster for the well centre. Was any retarder used?
Great! Yes the music is too loud haha but still learned a lot.
Like watching Steven Seagal with a real job for once. O.o
Haha yes he does look like him! 🤣
Nice job five stars
That's a lot of work... looks beautiful though..
Wouldn't it have been easier to been made in a cast or mold, and then nail and glued to the ceiling?
Both are valid traditional techniques. If it's just a straightforward escutcheon, it's easier to do it in-situ because it requires fewer tools and can be done in one day, whereas a more complicated design with sculptural detail would need a mold. Furthermore, in-situ plaster work can achieve concave profiles more easily.
The work was great! The music was so loud and distracting. It would have been better with no sound but the man talking.
Como se llama la pasta ke usa
what kind of plaster is that it is not hardening out so fast like normal plaster ???
Cornice cement
Molding plaster. And lime.
If you don't mind me asking what type of material are you using?
+chris schweitzer Hi Chris, I'll try to get in touch with the craftsman and get back to you. Cheers.
He was using putty lime for the ring then adding plaster to the water. cheers. good job well done and tidy.
what is putty lime ???
Putty Lime is created when natural rock is broken up and added to water. It is then referred to as Quicklime which burns.( I know first hand I was unfortunate to slip and fall into a lime pit when serving my time as a plasterer back in the sixties.) The Quicklime is left too cool for several weeks until it forms a putty, Which was used for both plastering and bricklaying. hope that answers your question. ps you can use hydrated lime make sure it is the type for plasterwork just soak it in a drum or bucket for a couple of weeks and it will form a putty which you then have to put through a fine sieve.
james f o'hare
Intereasting, thank you for the info ...and how aproximative is the raport on hydrated lime and water ? 50-50 ? or ? So that I understand it carefully .... hidrated lime is Calcium oxide (CaO) ????because in my native language it has another name and Im not sure if its the same material. Thanks once again you are awesome !!!
Such a hassle to make it wright
I can't hear what you're saying because of the music.
Yes and not to mention its annoying
Turn the music down
I got taught this when I started out and we would have made this on the bench ,100 times easier!! And then marked it out and fixed to ceiling, don’t see why you would do it upside down , pointless
Music is to loud.
If it was a renovation of a part it would be necessary to do it directly on the ceiling. But you are tired of nothing. This method is not worth doing on the ceiling. Why not do it on the floor or on a table? You have the diameter and so simple...
...and who thought it was a good idea to put that horrible music over this video? I couldn't understand a word that was said, so I learned absolutely nothing.
Annoying loud music!! I had to stop watching the video after 60 seconds. Please try again without the music.
Too much editing. Black and white, the music, the effects. Please post without all that.
That annoying music just got you a thumbs down . 👎