Grandthumb treated the gun like they advertised. The marketed the gun poorly And that’s gonna haunt them for a While. I don’t hunt and only use stuff for “tactical” mall ninja shooting.
I agree, the gun was marketed incorrectly or designed incorrectly for their intended application. This isn't going to be a military service rifle. It's accurate enough to be a great hunting rifle or range rifle. But even for a SHTF rifle, I would choose something else.
Garand Thumb is also an AR guy. I just don't see him (or MAC) promoting any bullpup as go-to-war rifles. With exception of the FAMAS (which are nearly impossible to get, all bullpups on the market now share the same flaw of being a closed system and are more difficult (than conventional military rifles) to clear when malfunctions occur. For civilian use, however, it's not that big of a deal.
Military Arms Channel and this is why I come to your channel. Never an ounce of bs. I’ve actually been using your content to push 300blk for the meth houses in my departments area so thanks for that video
Glad to see DT has “fixed” the rifle. I had 1 that would never fired more than 3 rounds without getting a stuck case. I eventually sold it because DT refused to fix the rifle. DT blamed all my malfunctions on the ammo even though that same ammo ran fine in all my other 308 rifles. I sold my rifle before a lot of other TH-cam channels posted videos of their rifles doing the same thing. Once that happened DT had to do something and could not blame everything else for their rifles issues.
The Riddler this was a smart move. I had too much hope in mine and held it for way too long. Stuck cases were only 1/5th of the issues I had, so I feel your frustration. 3 trips back and DT refused to refund me after all of it...
I mean they pretty much did set the rifle on the right track, albeit it may take a bit longer for the rifle to get where it needs to be (which is a disappointment and a half). Works well enough with milsurp that it can keep up with InRangeTV's Karl at 3-gun matches comes with a sick warranty now too.
Chalk me up as another happy MDR .308 owner. And frankly, I think the vast majority of negative "reviews" on this rifle are from people who adopted extremely early - GarandThumb and Inrange both had issues and InRange stuck around and actually helped improve the gun. They had early-rollout problems, which is really common. Props to the company for seeing it through and making the 2 parts they changed free retro-fits to existing customers. I've got the updated version with the wider extractor and the 6-position gas system (which you can adjust without removing the handguard, it's got a little cut-out in the end. Just put a long flathead screwdriver down from the muzzle-end and slot it in, adjust as needed, the window in the handguard is just to make it easier to see what setting you're on) - I have never had a malfunction. The closest thing to a malfunction I've had was when manually ejecting a live round - you have to charge the thing aggressively to get it to nudge the round into the ejection shute. So I baby-handed it and got a round lodged in the shute - simply re-racking it harder solved that. Definitely user error and has not happened again. I agree, it's a fantastic hunting rifle. I've taken several coyotes, at least a dozen porcupines, and 1 deer with mine. It's easy to walk through the woods with, store in a car, and lug around in general. It doesn't seem to care about cold weather either - I've hunted in snow and ~15 degrees with it and it didn't care. That's more down to intelligent lube selection though - I'm a big fan of Ballistol, it just never gums up. It's on the heavy side for a hunting rifle but with a good 2 point sling you dont notice it hiking around because it's just so compact. In addition to hunting there's another role I think the rifle fills really well - but only if outfitted with a longer barrel. It's a hell of a DMR, or a shorter range urban-type sniper. With my 20-inch (ES-Tactical, check them out, they do 6.5 creed barrels for it too!) barrel installed, plus the can, and a 1-8x PA Platinum Griffin optic, it's still under 10.5lbs, and at least a foot shorter than a comparable silenced .308 non-bullpup. Plus it balances exactly on the pistol grip. I'm getting phenominal accuracy with that aftermarket barrel and the compactness lets me carry a full length barrel, silenced semi-auto through the woods no problem at all. The 20 inch barrel makes the gun easily an 800m capable point target shooter, and not nearly as punishing without a can on the end. I think it fits that role a lot better than the role of battle rifle - mostly because I'm not sure a battle rifle has a place in modern combat. The M4 and its derivatives work just fine for close to mid range stuff with the 77gr pills, and longer range engagements are handled by the DM or an attached sniper team. Nobody seems to need a compact battle rifle. A compact DMR/SASS though....that idea has legs. I'm just some shmoe though, what do I know :) It's definitely my favorite semi-auto .308 - twice as accurate as any M1A I've shot (they all seem to be 2MOA guns no matter what you do to them), same weight, shorter, doesn't destroy brass like an AR-10, cleans like a big piston AR. And it puts all my brass in a nice little pile right in front of me for hand-loading. I did a trigger job on mine and it responded extremely well to that - it was the only part of the rifle I wasn't happy with out of the box. I'm sure any competent gunsmith could massage yours with even better results - I'm just some dude with a garage. Last note in case anyone actually reads this far - you can run the rifle without the ejection shute, if you got it gummed up with mud or sand or something. It pops off with a fingernail and with that removed, the rifle ejects at a 90 degree angle, just like any rifle, and you can still swap which side it ejects from. Very well designed system, IMO.
Excellent video! Between you, InRange and Garand Thumb, this rifle is getting evaluated but good! It looks like the bugs are being worked out, but it's taking time. Kudos to Desert Tech for listening and taking comments to heart.
@@Militaryarmschannel i used my MDR in bolivia with Ghost recon wildlands for MONTHS. Never cleaned it once, ran 200.000+ rounds through it, sometimes 4-5 mags in full Auto. Never had a jam, nothing failed so far and accuracy is like day 1
Another great video; Also, great interview on Dr. Gorka's channel. Nice to see you spreading a great message to what is happening to your channel and other channels like yours. Keep doing a great job !!! Hooah !!!
I’ve been running a recently purchased MDRx in 223/556 for the last few months. The rifle has been flawless. I waited for all of the upgrades to become standard. For me, that proved to be a smart decision. I’m enjoining this gun so much, this is the only long gun I’ve shot since I got it. I’m running with a 1 MOA reticle with backup iron sites. I’ve taken this out to 200 yards...with great success. I like everything about this gun. Being left handed, this is like a dream come true. I can shoot with my friends and convert this to right handed for them in a minute or two. I agree with Mac...on all accounts.
@@toddk1377 That was my hunting rifle for about 4 years+ I will say, I have my M1A set up for hunting suppressed, and it does kinda suck if you need to walk very far. Mine weighs 14.6 pounds with a loaded 10 round mag.
In my case the MDR was mostly reliable with commercial 308, but I never got through a single mag with anything 7.62 NATO without a failure. I just got mine back after sending it in (~3 months) for all the updates, and after 300 rounds of various military ammy, it's been flawless. And you can adjust the gas through the little window, you just need a small screwdriver ir stick, a flashlight, and a good set of eyes (or for me, reading glasses).
You had the port cover w/ scissor mechanism fly off too, just like mine did once! LOL Good stuff. Mine, however, did not feed another live round- it just left the spent brass hanging locked into the extractor. Thanks for your great vids! Love that you're honest with your experiences.
I'm working on a bullpup kit for G3 rifles. The charging handle placement and collapsible stock have made it easy so far. Closing off the trigger mechanism is a pain without any plastic molding or milling equipment.
I had the chance to shoot one the other day (.308)....damn cool ass rifle. The owner was a leftie and had it left-side eject....crazy fast to switch it to right-side eject for me to shoot right handed.
I mean, it's pretty good. The malfunction in this video is pretty easy to explain though and makes a lot of sense. Just seems like the ejection arm plate didn't hold on to the upper securely.
Thanks as always for showing us the truth. I think this is completely acceptable at certain price points, but for what DesertTech is asking, they still have a lot of work to do. Regardless, I hope they get some support. Bullpups are the future (just like semi autos were to revolvers) so we need more people working on them now! Manual of arms, ergonomics, reliability, trigger pull etc will follow in time. Hang in there!
MAC...have you tried or looked at DT’s new MDRX improvements? I’ve held off purchasing one of these for a while...but it looks like DT is making an honest and (hopefully) solid attempt to correct all of the problems that you and others have brought front and center. Thanks for the work you do in this forum.
I appreciate the video, and the effort you put into the update of new parts. I like the idea of this rifle, but I'll keep my LMT MWS, which has run 100% with every type of ammo I've tried, PMags and Lancers too. My latest update to the MWS is a Cloud Defensive OWL, huge and awesome.
Some of the accuracy issues you are having may be because of it being a bullpup. Since the weight is more centralize it has a smaller moment of inertia, this means it is more sensitive to small movements. It is also rotating around an axis closer to your shoulder. Try resting the front of the gun closer to the end of the barrel and being extra careful to hold your shoulder still.
I think it’s cool that they recognize that you have fans. Doesn’t surprise me that they bent over backwards for you. Then again most of these companies really care about their customers experience. Just not usually at the president of the company level lol. Nice long shot! Worse malfunction I ever had was a bolt shear during a looong firefight in Mosul in 2004. First and last time I ever saw it. Sometimes weird things happen. Then again I’ve also had a pop no kick in my long career as a shooter. Maybe it’s just me lmao.
That Tactacam is really cool. Being able to see what you see through the scope makes the videos much more entertaining. Can you make a video explainig how it works?
Had the same type malfunction repeatedly on my old (A1) Styer AUG when I tried a new, longer barrel (20"). Had to do with the gassing. When I put the factory barrel (16" w detachable suppressor) back on it went back to normal, reliable operation. Though both barrels have the gas port in the same place, for some reason the non-suppressed 20" had the problem but the suppressed 16" did not. My guess- This type malfunction is basically a failure to eject because the bolt group doesn't go back far enough to fling the spend case out. It begins loading a new cartridge before the spent one is actually ejected. Take the suppressor off and it certainly will not happen; or just adjust the gas port to send more gas back to cycle the action. I guess it could be the opposite (is over-gassed) but that doesn't seem to make sense to me.
that actually happened to me with an ar15 and an cheap surplus mag. as the spent case was ejecting, a round popped out of the mag and slammed the spent case up, stopped the ejection and threw the live round floating in the receiver
San Diego California just passed a bill you have to have a proved DOJ lock box and have your weapons in it at all times you're not allowed to leave any weapon outside of the box in your house if a cop sees that you get 6 months in jail
The only one I would consider is the Tavor 7. I have a pre-production one I'm testing but it has accuracy issues. They are resolving the accuracy issues. If they accomplish that, it will be the 308 bullpup to beat.
Okay I got Idea for fixing Gas adjust on this MDR Rifles. Need connect cabal all way trigger somewhere near trigger flick 6 direction 6 setting Gas pressure adjust.
Can you do a RDB comparison? I have heard the Kel tec RDB will be getting an update, and also be availible in 308 and 6.5 Creedmore. I love the ACSS reticle I recommend them to everyone, they are just so easy to use
I will never bet my life on a bullpup rifle period. The couple I've owned both had feeding issues over several brands of ammo. Sold them both within 3 months of ownership. They do look cool however 🍻🇺🇸
Steven there’s about 4-5 TH-cam content creators who’ve used this rifle - all have demonstrated major failures in the 308. I’m eager to see how the 556 fairs.
Garand Thumb also had some issues but that's been well before the MDR came out with fixes. That being said, the new MDRs in .308 are pretty decent. InRangeTV's Karl ran it fine in 3-gun competitions
I have one of the early mdrs like yours. It’s ran well with a couple of malfunctions. They’ve been a bound up case that gets halfway caught in the ejection shoot. I’d really like for a 3rd party to make an ejection cover that’s a more traditional brass deflector.
Have any thoughts or interest in acquiring the 5.56 conversion for the rifle? Also, the issue with the original line of rifles was that it didn't handle a wide variety of different ammunition well. Milsurp ammunition in particular seemed to have issues(as pointed out by InRange), but the updated rifle appears to work flawlessly.
.308 Winchester is a far better hunting round than 6.5 Creedmoor. More flexibility and more energy at responsible hunting ranges, not to mention far better bullet choices. Unless one is too sensitive for the mild recoil of .308 Winchester.
Less than 200rds and my July 18 built rifle is going back. Rear pin broke out out both sides of frame. Federal and PMC factory ammo. Pretty disappointing. Hoping to get all the updates I requested. Mine always ran suppressed....ripped off plenty of rims not suppressed. New gas regulator fixed that. Still want this rifle to work....nice layout but needs stronger steel parts.
I will keep my RFB thank you very much, I know that some malfunctions can be a pain to clear due how the RFB is designed, but the MDR is way too over engineered. I believe that IWI got it right with keeping the bolt/action as simple a possible. I know that concept is not as left hand friendly as the MDR tries to be, but it keeps everything reliable. I know that everyone is different, but as someone who is left handed and left eye dominate; prescription glasses and ergonomics have allowed me to shoot quite well right handed.
Could be. Unfortunately the failings of the ACR were pretty much 100% due to Bushmaster's screwing around, and not anything wrong with the design itself. The Tavor 7 looks interesting, but I doubt it will be better, since the MDR already does things, inherently, better than it ever will - namely ambidexterity, barrel swap ability, and the trigger. Plus, the 5.56 Tavor is kind of a piece of shit, so I don't hold out a lot of Hope for its Big Brother
Be nice if someone did a video on "back pressure" with different cans, I realize you couldn't cover ever gun or every suppressor but a general run down on the procedure. Perhaps which ones are better for different applications or how to tune your gun to be the most efficient.
The window cuts in the handguard are just so you can see what gas setting you're on. It's nearly impossible to adjust the gas system through the handguard.
Tim - I have a MDR 6.5 creedmoor barrel, hit me up if you'd like to give it a shot. Happy to send it to you for testing.
ACSS reticle is seriously the best medium range reticle.
@NSA 000 wat
Grandthumb treated the gun like they advertised. The marketed the gun poorly
And that’s gonna haunt them for a
While. I don’t hunt and only use stuff for “tactical” mall ninja shooting.
I agree, the gun was marketed incorrectly or designed incorrectly for their intended application. This isn't going to be a military service rifle. It's accurate enough to be a great hunting rifle or range rifle. But even for a SHTF rifle, I would choose something else.
@@Militaryarmschannel spot on!
Nice comment dude honesty level over 9000
Garand Thumb is also an AR guy. I just don't see him (or MAC) promoting any bullpup as go-to-war rifles. With exception of the FAMAS (which are nearly impossible to get, all bullpups on the market now share the same flaw of being a closed system and are more difficult (than conventional military rifles) to clear when malfunctions occur. For civilian use, however, it's not that big of a deal.
Military Arms Channel and this is why I come to your channel. Never an ounce of bs. I’ve actually been using your content to push 300blk for the meth houses in my departments area so thanks for that video
Keep up the scope cam work man it looks great.👍
Boer Sniper Very interesting
I love the view that camera provides us, the viewer .👍
We're glad you like it!
Glad to see DT has “fixed” the rifle. I had 1 that would never fired more than 3 rounds without getting a stuck case. I eventually sold it because DT refused to fix the rifle. DT blamed all my malfunctions on the ammo even though that same ammo ran fine in all my other 308 rifles. I sold my rifle before a lot of other TH-cam channels posted videos of their rifles doing the same thing. Once that happened DT had to do something and could not blame everything else for their rifles issues.
The Riddler this was a smart move. I had too much hope in mine and held it for way too long. Stuck cases were only 1/5th of the issues I had, so I feel your frustration. 3 trips back and DT refused to refund me after all of it...
I mean they pretty much did set the rifle on the right track, albeit it may take a bit longer for the rifle to get where it needs to be (which is a disappointment and a half). Works well enough with milsurp that it can keep up with InRangeTV's Karl at 3-gun matches
comes with a sick warranty now too.
Wow. I'd never buy anything from DT based on that alone.
Chalk me up as another happy MDR .308 owner. And frankly, I think the vast majority of negative "reviews" on this rifle are from people who adopted extremely early - GarandThumb and Inrange both had issues and InRange stuck around and actually helped improve the gun. They had early-rollout problems, which is really common. Props to the company for seeing it through and making the 2 parts they changed free retro-fits to existing customers.
I've got the updated version with the wider extractor and the 6-position gas system (which you can adjust without removing the handguard, it's got a little cut-out in the end. Just put a long flathead screwdriver down from the muzzle-end and slot it in, adjust as needed, the window in the handguard is just to make it easier to see what setting you're on) - I have never had a malfunction. The closest thing to a malfunction I've had was when manually ejecting a live round - you have to charge the thing aggressively to get it to nudge the round into the ejection shute. So I baby-handed it and got a round lodged in the shute - simply re-racking it harder solved that. Definitely user error and has not happened again.
I agree, it's a fantastic hunting rifle. I've taken several coyotes, at least a dozen porcupines, and 1 deer with mine. It's easy to walk through the woods with, store in a car, and lug around in general. It doesn't seem to care about cold weather either - I've hunted in snow and ~15 degrees with it and it didn't care. That's more down to intelligent lube selection though - I'm a big fan of Ballistol, it just never gums up. It's on the heavy side for a hunting rifle but with a good 2 point sling you dont notice it hiking around because it's just so compact.
In addition to hunting there's another role I think the rifle fills really well - but only if outfitted with a longer barrel. It's a hell of a DMR, or a shorter range urban-type sniper. With my 20-inch (ES-Tactical, check them out, they do 6.5 creed barrels for it too!) barrel installed, plus the can, and a 1-8x PA Platinum Griffin optic, it's still under 10.5lbs, and at least a foot shorter than a comparable silenced .308 non-bullpup. Plus it balances exactly on the pistol grip. I'm getting phenominal accuracy with that aftermarket barrel and the compactness lets me carry a full length barrel, silenced semi-auto through the woods no problem at all. The 20 inch barrel makes the gun easily an 800m capable point target shooter, and not nearly as punishing without a can on the end.
I think it fits that role a lot better than the role of battle rifle - mostly because I'm not sure a battle rifle has a place in modern combat. The M4 and its derivatives work just fine for close to mid range stuff with the 77gr pills, and longer range engagements are handled by the DM or an attached sniper team. Nobody seems to need a compact battle rifle. A compact DMR/SASS though....that idea has legs. I'm just some shmoe though, what do I know :)
It's definitely my favorite semi-auto .308 - twice as accurate as any M1A I've shot (they all seem to be 2MOA guns no matter what you do to them), same weight, shorter, doesn't destroy brass like an AR-10, cleans like a big piston AR. And it puts all my brass in a nice little pile right in front of me for hand-loading.
I did a trigger job on mine and it responded extremely well to that - it was the only part of the rifle I wasn't happy with out of the box. I'm sure any competent gunsmith could massage yours with even better results - I'm just some dude with a garage.
Last note in case anyone actually reads this far - you can run the rifle without the ejection shute, if you got it gummed up with mud or sand or something. It pops off with a fingernail and with that removed, the rifle ejects at a 90 degree angle, just like any rifle, and you can still swap which side it ejects from. Very well designed system, IMO.
@@chadhaire1711 Should be = wish was? Ah, the internet. Such a lovely place.
@@chadhaire1711 If you can build the same rifle and put it out on the showroom floor for less than $1500, go for it. You'd be a very rich man.
When you first said "This..." I almost thought I was watching a Doug Demuro video
This is a (year) brand new (car name)
Loving the scope cam! As someone who hasn’t yet gotten the opportunity to shoot a rifle, it put a smile on my face seeing what it would be like :)
Hope you get the opportunity sooner or later!
Hope one day you'll be able to dude
If you're ever in east tn I'd be happy to let you shoot a few, I love watching someone shoot for the first time.
Where you from?
Boomerisadog I have shot before but but never a rifle. If I’m in the area I’ll let you know :)
Excellent video! Between you, InRange and Garand Thumb, this rifle is getting evaluated but good! It looks like the bugs are being worked out, but it's taking time. Kudos to Desert Tech for listening and taking comments to heart.
That scope and camera combo is bad ass
I've shot this rifle extensively in the division 2. Never had a single malfunction.
My Division 2 MDR runs great as well.
@@Militaryarmschannel i used my MDR in bolivia with Ghost recon wildlands for MONTHS. Never cleaned it once, ran 200.000+ rounds through it, sometimes 4-5 mags in full Auto.
Never had a jam, nothing failed so far and accuracy is like day 1
Another great video; Also, great interview on Dr. Gorka's channel. Nice to see you spreading a great message to what is happening to your channel and other channels like yours. Keep doing a great job !!! Hooah !!!
Thank you!
Making 500 yards look easy lol that's awesome. I like that view
thanks for the update
I’ve been running a recently purchased MDRx in 223/556 for the last few months. The rifle has been flawless. I waited for all of the upgrades to become standard. For me, that proved to be a smart decision. I’m enjoining this gun so much, this is the only long gun I’ve shot since I got it. I’m running with a 1 MOA reticle with backup iron sites. I’ve taken this out to 200 yards...with great success. I like everything about this gun. Being left handed, this is like a dream come true. I can shoot with my friends and convert this to right handed for them in a minute or two. I agree with Mac...on all accounts.
Completely agree with you and I ain't paying that price for a hunting rifle haha
$2300 rifle , $1200 scope and with match ammo best group of 2moa ? Nah !!
Especially one that doesn't function as good as a $500 ar10 from psa
@@DeltaBadeMaker; WORD !!
I wouldn't pay that much for that rifle either. I'd rather spend the money on a M14 or M1A.
@@toddk1377 That was my hunting rifle for about 4 years+ I will say, I have my M1A set up for hunting suppressed, and it does kinda suck if you need to walk very far. Mine weighs 14.6 pounds with a loaded 10 round mag.
When I shot one, it had one of those hexagonal(octagonal?) OSS suppressors that matched the lines of the handguard very well. It looked nice.
The scope cam footage was amazing. You were ringing steel like its nothing.
In my case the MDR was mostly reliable with commercial 308, but I never got through a single mag with anything 7.62 NATO without a failure.
I just got mine back after sending it in (~3 months) for all the updates, and after 300 rounds of various military ammy, it's been flawless. And you can adjust the gas through the little window, you just need a small screwdriver ir stick, a flashlight, and a good set of eyes (or for me, reading glasses).
You should do a hip firing video using the camera/scope by using your iPad display as your aiming point.
Accurate 80s hip fire WHAT?!?!?!
Fuckin' A! I second this!
Imagine doing that, but the display is part of a mask or glasses. Real future right there
INRANGETV also had problems with theirs. Their 5.56 conversion has had no problems.
They made another video about all the fixes made to the gun, the .308 ran fine.
I just watched your initial MDR videos and now this:D
Great.
This in scope footage is really cool!
The one I shot with IV8888 this year at 600 yards worked well it's just the cost of the rifle that puts me off.
You had the port cover w/ scissor mechanism fly off too, just like mine did once! LOL Good stuff. Mine, however, did not feed another live round- it just left the spent brass hanging locked into the extractor.
Thanks for your great vids! Love that you're honest with your experiences.
Its still one of the best looking guns to me.
I'm working on a bullpup kit for G3 rifles. The charging handle placement and collapsible stock have made it easy so far. Closing off the trigger mechanism is a pain without any plastic molding or milling equipment.
So..uh...Any news on this?
I had the chance to shoot one the other day (.308)....damn cool ass rifle. The owner was a leftie and had it left-side eject....crazy fast to switch it to right-side eject for me to shoot right handed.
Look at the smile on Tim’s face at the start. You know he loves this gun
Mack it's awesome! Thank you.
That makes sense to me. That thing would be a Hog Killer down here in Texas👍🇺🇸
See there already Texas tested 👍
This video made me go out and shoot my RDB. That el cheapo rifle has been spot on for me since I got it two years ago.
I really like the idea of this rifle. I so badly want it to be good.
I mean, it's pretty good. The malfunction in this video is pretty easy to explain though and makes a lot of sense. Just seems like the ejection arm plate didn't hold on to the upper securely.
Bull pups will be good in 5-10 years ... I hope 🤞
That camera is cool AF!
Thanks as always for showing us the truth. I think this is completely acceptable at certain price points, but for what DesertTech is asking, they still have a lot of work to do. Regardless, I hope they get some support. Bullpups are the future (just like semi autos were to revolvers) so we need more people working on them now! Manual of arms, ergonomics, reliability, trigger pull etc will follow in time. Hang in there!
You definitely helped clear things up for me, thanks.
Great shooting
Thank you.
Bought a Kel-Tec RDB instead. Third of the price of an MDR with nitride barrel and super reliable so I'm very happy.
Funny you say that when even the RDB and RFB had all sorts of components breaking when they first came out, that including firing pins
@@kniter01 Third of the price with less complicated mechanisms
@@shanesizemore3654 sure and that's fine. Money is money.
The RDB doesn't shoot .308 Winchester.
MAC...have you tried or looked at DT’s new MDRX improvements? I’ve held off purchasing one of these for a while...but it looks like DT is making an honest and (hopefully) solid attempt to correct all of the problems that you and others have brought front and center. Thanks for the work you do in this forum.
I appreciate the video, and the effort you put into the update of new parts. I like the idea of this rifle, but I'll keep my LMT MWS, which has run 100% with every type of ammo I've tried, PMags and Lancers too. My latest update to the MWS is a Cloud Defensive OWL, huge and awesome.
That tactacam is awesome!
Some of the accuracy issues you are having may be because of it being a bullpup. Since the weight is more centralize it has a smaller moment of inertia, this means it is more sensitive to small movements. It is also rotating around an axis closer to your shoulder. Try resting the front of the gun closer to the end of the barrel and being extra careful to hold your shoulder still.
Love the tactacam footage!
Sharp bullpup. Enjoyed your interview with Sen Gorka.
Thanks man.
Bring back the torture test!!!
We are, we're having to change ranges... it's a constant issue for us.
Hey MAC! Would be you be able or willing to do a comparison video between the Tavor 7 and MDR? 😁
I think it’s cool that they recognize that you have fans. Doesn’t surprise me that they bent over backwards for you. Then again most of these companies really care about their customers experience. Just not usually at the president of the company level lol. Nice long shot! Worse malfunction I ever had was a bolt shear during a looong firefight in Mosul in 2004. First and last time I ever saw it. Sometimes weird things happen. Then again I’ve also had a pop no kick in my long career as a shooter. Maybe it’s just me lmao.
I got a es-tactical barrel in 6.5 creedmoor before I took delivery of my mdr a few months ago and love the barrel
Thank you.
inrange guys say that while the 308 version has trouble the 223 is fully reliable. and you can easily swap calibers.
My .223 kit didn’t work at all and I had to return it.
Mac makes it look easy.
Interesting malf! Glad you caught that one on video :)
Love the scope cam
Excellent update thank you
That Tactacam is really cool. Being able to see what you see through the scope makes the videos much more entertaining. Can you make a video explainig how it works?
Had the same type malfunction repeatedly on my old (A1) Styer AUG when I tried a new, longer barrel (20"). Had to do with the gassing. When I put the factory barrel (16" w detachable suppressor) back on it went back to normal, reliable operation. Though both barrels have the gas port in the same place, for some reason the non-suppressed 20" had the problem but the suppressed 16" did not. My guess- This type malfunction is basically a failure to eject because the bolt group doesn't go back far enough to fling the spend case out. It begins loading a new cartridge before the spent one is actually ejected. Take the suppressor off and it certainly will not happen; or just adjust the gas port to send more gas back to cycle the action. I guess it could be the opposite (is over-gassed) but that doesn't seem to make sense to me.
I like the MAC-EYE vision!
been waiting for tavor 7 for possible deer rifle. might go with desert tech undecided
that actually happened to me with an ar15 and an cheap surplus mag. as the spent case was ejecting, a round popped out of the mag and slammed the spent case up, stopped the ejection and threw the live round floating in the receiver
San Diego California just passed a bill you have to have a proved DOJ lock box and have your weapons in it at all times you're not allowed to leave any weapon outside of the box in your house if a cop sees that you get 6 months in jail
Nice package. Really like acss reticle. Is there a bullpup 7.62x51 that you could recommend that you would consider "combat ready"?
The only one I would consider is the Tavor 7. I have a pre-production one I'm testing but it has accuracy issues. They are resolving the accuracy issues. If they accomplish that, it will be the 308 bullpup to beat.
Cool. Thanks. What mags does it use? Or are they proprietary?
Thanks for all you do!
Okay I got Idea for fixing Gas adjust on this MDR Rifles. Need connect cabal all way trigger somewhere near trigger flick 6 direction 6 setting Gas pressure adjust.
Can you do a RDB comparison? I have heard the Kel tec RDB will be getting an update, and also be availible in 308 and 6.5 Creedmore. I love the ACSS reticle I recommend them to everyone, they are just so easy to use
I'm looking forward to the Texas hunt you mentioned.
I had to put my shades on to watch the last part of this video. The glare was crazy 😜
I should have put a warning in the video.
Military Arms Channel you some James reeves tactical short shorts to get some sun on those legs😂
I will never bet my life on a bullpup rifle period. The couple I've owned both had feeding issues over several brands of ammo. Sold them both within 3 months of ownership. They do look cool however 🍻🇺🇸
I have lusted after an MDR since it was announced (and now the Tavor 7) but I cant afford the price point...yet.
Echs BeeThree I’m waiting for the Tavor 7
I remember when the original mdr video went up
Damn, Tim! Leave it to you to break it in ways that no one has managed before.
It was InRange that had the issues. There 5.56 model is the one that has worked flawlessly.
Steven there’s about 4-5 TH-cam content creators who’ve used this rifle - all have demonstrated major failures in the 308. I’m eager to see how the 556 fairs.
Garand Thumb also had some issues but that's been well before the MDR came out with fixes. That being said, the new MDRs in .308 are pretty decent. InRangeTV's Karl ran it fine in 3-gun competitions
I have one of the early mdrs like yours. It’s ran well with a couple of malfunctions. They’ve been a bound up case that gets halfway caught in the ejection shoot. I’d really like for a 3rd party to make an ejection cover that’s a more traditional brass deflector.
That malfunction reminds me of one I had with my AR10, it was the extractor, Wich they replace the whole bolt for me. Never done it since, 10 years.
Liked hearing about the optic, are you going to do a full video on that particular product line ?
I like the upside down smilie face reticle
Have any thoughts or interest in acquiring the 5.56 conversion for the rifle?
Also, the issue with the original line of rifles was that it didn't handle a wide variety of different ammunition well. Milsurp ammunition in particular seemed to have issues(as pointed out by InRange), but the updated rifle appears to work flawlessly.
.308 Winchester is a far better hunting round than 6.5 Creedmoor. More flexibility and more energy at responsible hunting ranges, not to mention far better bullet choices.
Unless one is too sensitive for the mild recoil of .308 Winchester.
All nonsense.
8:40 what a cute looking scope reticle aha
When you shoot upsidedown, you get a nice SMILING FACE in your optic!
Less than 200rds and my July 18 built rifle is going back. Rear pin broke out out both sides of frame. Federal and PMC factory ammo. Pretty disappointing. Hoping to get all the updates I requested. Mine always ran suppressed....ripped off plenty of rims not suppressed. New gas regulator fixed that. Still want this rifle to work....nice layout but needs stronger steel parts.
The failure of the 308 Desert Tech broke my heart
You know they've made changes to fix those starting issues right?
I will keep my RFB thank you very much, I know that some malfunctions can be a pain to clear due how the RFB is designed, but the MDR is way too over engineered.
I believe that IWI got it right with keeping the bolt/action as simple a possible. I know that concept is not as left hand friendly as the MDR tries to be, but it keeps everything reliable. I know that everyone is different, but as someone who is left handed and left eye dominate; prescription glasses and ergonomics have allowed me to shoot quite well right handed.
There's nothing more complex about how the MDR cycles versus the RFB, they're just different.
RedGoblin I’ve had an X95 for a few months now and it has been running all kinds of ammo absolutely flawlessly. Cannot recommend it enough.
I just saw that PA just put out a 2.5-10 gold line, that would a good match
Try Hornady 155gr ELD match, so far the only load I can get sub (.85) MOA groups. Sadly Federal gold medal match, didn't do so well in my MDR
Your Poor Left index finger Brother. Ouch!! Looks way better, but I know how bad that had to hurt.
It's good to go now, it's just a little uglier than before.
@@Militaryarmschannel LOL. Glad you still have it. Take care my friend.
Another rifle I womt be able to afford for years!
Nice!
Looks like a cool rifle
I feel like this is becoming the ACR
Plus I got a feeling the Tavor 7 will do what that does better
Could be. Unfortunately the failings of the ACR were pretty much 100% due to Bushmaster's screwing around, and not anything wrong with the design itself. The Tavor 7 looks interesting, but I doubt it will be better, since the MDR already does things, inherently, better than it ever will - namely ambidexterity, barrel swap ability, and the trigger. Plus, the 5.56 Tavor is kind of a piece of shit, so I don't hold out a lot of Hope for its Big Brother
You might have sold a tacticam with the scope mount. I may run one in some long range matches. Looks pretty cool.
finger looks like its healing up well MAC
It’s doing good. A bit uglier than before but otherwise it’s fine. 👍
@@Militaryarmschannel good to hear
Liked n subscribed awesome videos love em
They should make a semi auto bullpup sniper. I think it's gonna be the first bullpup semi auto sniper.
Walther wa 2000. Came out in the early 80’s I think.
Be nice if someone did a video on "back pressure" with different cans, I realize you couldn't cover ever gun or every suppressor but a general run down on the procedure. Perhaps which ones are better for different applications or how to tune your gun to be the most efficient.
I guess running running gold medal match ultra premium mega beast mortgage refinancer rounds helps eliminate ammo being the cause of problems lol.
Love the tacticam :)
The window cuts in the handguard are just so you can see what gas setting you're on. It's nearly impossible to adjust the gas system through the handguard.
Yes, I know.
Good video , Pale nein white leg near the end . Then you ask not to make fun of your legs . ? Did your legs turn pink or Red by the end of your day ?
12:52 When MAC uses his ultimate technique.
?