Bert your flying style was way better than Kyle's. He was like angry bee in the jungle. I rather like smooth low RPM 3D than hard and not seeing the Heli 3D. Thanks for the video guys.
I like the slower 3D, it shows full control and you just know everything is done on purpose. The harder 3D flights sometimes look like the pilot is just going with the flow but you never know how the pilot intended to get put of the previous manoeuvre and in to the next One.
Its nice to see you boys hanging out again! Bert: next time Kyle comes over, dont make him drink outta the garden hose bro - at least give the man a glass or let his t-shirt dry off before you finish the video!!! Kyle: Hope you make friends with SAB again cause flying my choppers formerly known as kse's is a real mouthful and interrupts my bragging rights. Happy Landings fellas!
Nice video Bert and Kyle. The machine looks pretty impressive. Hope everything is going well out at IRCHA. Wish I were out there with you guys but stuck in China for work. Have fun!
All is good my friend. A lot going right now in my life right now. I'll be back in Orlando at the end of the month. I'll hook up with you then and we can catch up. And BTW, if your old man then I'm old also...lol
hey, I wanted to ask you guys about the main bearing block on how it mounts. I've noticed there is space in between the block and the main plate. The feeder bottoms out on the motor before the block is fully secured. I had to place a washer under the tabs where the bolts go because there was no way I could make it tight without bending the aluminum. I was wondering why my battery, motor and servos were coming down so hot and could never understand why. Until I had replaced a main shaft and noticed the hole for the set screw was drilled further down and from there my problem started. I had to add so many shims which made the shaft go further down. No matter what I do I can't seem to get that main bearing block to sit flush or close enough to not put pressure on the motor bearings. Please look in to this Thanks
Was so nice to see you two guys together again, Kyle and Bert! Many greetings from far Germany! Kyle your flight was awesome as always, sometimes I cannot believe you still see this bouncing little yellow thing, smashing through the air, lol. Bert, I really liked your flight, goes more into the direction how I fly (although I know you normally fly different). Smooth flying is not boring, I guess most people prefer it! Talking about Low rpm.. here is a flight with mine at 60% Throttle :p th-cam.com/video/0LCrpDH_8cs/w-d-xo.html
I do want to build a sab 770 in the event of my next crash with my 700e I never crashed due to pilot error just equipment malfunction. Parts are increasingly hard to get and the place i go has the worst align parts pages everything is mixed up together and half the parts are out of stock.I want to make a permanent switch to sab. I bought my furball competition from anything heli his site is super easy to navigate. i saw a video of you flying on utube on some tv show you were flying a big red heli at least 770 size do you remember what it was. if i build a 770 it has to be red or yellow lol
just watched the video like many have commented below is like the slow aerobatics. I just assembled my 570 & look forward to good things even though it hasn't started out as such. This fire ball compared to my blade 300x a decent step up? As I like the 300 size & really haven't been able to get used to my 450 which is fly barred.
in a nut shel if i already have an align 800dfc nd 700e w/vbar and i was ging to build a kraken but its to expencive and i already have 2 real good big helis not to mention a 6oo nitro . which would you recomend a fire ball or mini comet i just saw simones video with her new wee mini comet I have to asay it looks amazing. are they both same size. the bigest issue i have is another 250 for the neo
how am i setting up my v bar neo ? as an other 450? im using the6.x express 04949 thanks guys btw how far are you from sebastian 32958 I fly at airmasters on 512 off the inner steak
Josh Strahler I think Bert talk about it in other video and explained how to get around that but I don't remember how to get it fixed, try looking at some of his latest videos.
Lets never forget that people like bert paved the way for young buck Kyle hell man , he got me into the hobby bert RESPECT.
Bert your flying style was way better than Kyle's. He was like angry bee in the jungle. I rather like smooth low RPM 3D than hard and not seeing the Heli 3D. Thanks for the video guys.
I’ve just bought the Fireball Havok... I am so excited. I have Blade, Align, KDS, and Walkera.... cannot wait to have the king. SAB
i know I am quite off topic but does anybody know a good place to watch new series online ?
@Benson Jensen i would suggest FlixZone. You can find it by googling =)
@Gavin Blaze yup, been using Flixzone for since march myself =)
@Gavin Blaze Thank you, I signed up and it seems to work :) Appreciate it!!
@Benson Jensen Happy to help :)
I like the slower 3D, it shows full control and you just know everything is done on purpose. The harder 3D flights sometimes look like the pilot is just going with the flow but you never know how the pilot intended to get put of the previous manoeuvre and in to the next One.
I've watched this at least 20 times and never ceases to make me laugh. Absolutely amazing!
Great flights both of you!
Bert & Kyle a really Nice Video & GreatFlying ! I like the Slow flying better ! Thanks for the Video !
Its nice to see you boys hanging out again!
Bert: next time Kyle comes over, dont make him drink outta the garden hose bro - at least give the man a glass or let his t-shirt dry off before you finish the video!!!
Kyle: Hope you make friends with SAB again cause flying my choppers formerly known as kse's is a real mouthful and interrupts my bragging rights.
Happy Landings fellas!
Nice video Bert and Kyle. The machine looks pretty impressive. Hope everything is going well out at IRCHA. Wish I were out there with you guys but stuck in China for work. Have fun!
mtuccio1 hey dude. Long time I see. Hope all is well!
All is good my friend. A lot going right now in my life right now. I'll be back in Orlando at the end of the month. I'll hook up with you then and we can catch up. And BTW, if your old man then I'm old also...lol
Good vid.
WOW impressive as usual! 👍🏻
Kyle you’re the man!!! 😁👍🏻🚁
This and the MINI COMETT are 2 of my favorite HELIS ever. These fly like a much bigger HELI, TOO bad they are discontinuing this AMAZING HELI.
Five dislikes.....haters are everywhere....Great vid! Thumbs Up!
hey, I wanted to ask you guys about the main bearing block on how it mounts. I've noticed there is space in between the block and the main plate. The feeder bottoms out on the motor before the block is fully secured. I had to place a washer under the tabs where the bolts go because there was no way I could make it tight without bending the aluminum. I was wondering why my battery, motor and servos were coming down so hot and could never understand why. Until I had replaced a main shaft and noticed the hole for the set screw was drilled further down and from there my problem started. I had to add so many shims which made the shaft go further down. No matter what I do I can't seem to get that main bearing block to sit flush or close enough to not put pressure on the motor bearings. Please look in to this
Thanks
Was so nice to see you two guys together again, Kyle and Bert! Many greetings from far Germany! Kyle your flight was awesome as always, sometimes I cannot believe you still see this bouncing little yellow thing, smashing through the air, lol. Bert, I really liked your flight, goes more into the direction how I fly (although I know you normally fly different). Smooth flying is not boring, I guess most people prefer it! Talking about Low rpm.. here is a flight with mine at 60% Throttle :p
th-cam.com/video/0LCrpDH_8cs/w-d-xo.html
Hi Simone, thanks for the kind comments :) Hope to see you again some time soon.
Awesome 👍 what cyclic gain is recommended for the high headspeed on the neo?? Thanks 🙏
I want one! 😀
Gosh damn Kyle, you had so much head speed it sounded like it was going to explode but was definitely 2 minutes of chub.
I do want to build a sab 770 in the event of my next crash with my 700e I never crashed due to pilot error just equipment malfunction. Parts are increasingly hard to get and the place i go has the worst align parts pages everything is mixed up together and half the parts are out of stock.I want to make a permanent switch to sab. I bought my furball competition from anything heli his site is super easy to navigate. i saw a video of you flying on utube on some tv show you were flying a big red heli at least 770 size do you remember what it was. if i build a 770 it has to be red or yellow lol
it was science chanel
Nice flying..
lol Bert is like time for kids to have fun in gonna do smooth flight 😂😂👊🏻
i just ordered the red upgraded version lol i just wanted to try sab and get away from blade and align
Thank you for your support Joseph, if you're in the US, be sure to check out BK Hobbies for your Goblin needs, we're part of SAB USA.
just watched the video like many have commented below is like the slow aerobatics. I just assembled my 570 & look forward to good things even though it hasn't started out as such.
This fire ball compared to my blade 300x a decent step up? As I like the 300 size & really haven't been able to get used to my 450 which is fly barred.
I love to fly goblin 280 with low head speed
in a nut shel if i already have an align 800dfc nd 700e w/vbar and i was ging to build a kraken but its to expencive and i already have 2 real good big helis not to mention a 6oo nitro . which would you recomend a fire ball or mini comet i just saw simones video with her new wee mini comet I have to asay it looks amazing. are they both same size. the bigest issue i have is another 250 for the neo
Great flying Bert. Now do a autorotation on this puppy
take a 700 heli and strap a puppy to it, then, then you could literally do autos with a puppy.
Great video guys 😁
Lol I'm 42 I prefer that speed of how Bert was flying lol I fly all my heils that way
how am i setting up my v bar neo ? as an other 450? im using the6.x express 04949 thanks guys btw how far are you from sebastian 32958 I fly at airmasters on 512 off the inner steak
cool guy´s and heli. Like =)
Have you saw any side to side play in the boom to frame mount
Josh Strahler I think Bert talk about it in other video and explained how to get around that but I don't remember how to get it fixed, try looking at some of his latest videos.
Please make a Video of the Goblin Mini Comet
best presentation Video ever-not this attacat flying!!
What about using a 50amp HW esc
I like the slower better you can keep up
Cause all old pilots like doing double piro-flips :P