Thank you for making this video and keeping it up. My Toshiba has been running almost non stop for 13 years and this video helped me get in to replace the thermal paste and service the fan. I would have never guessed that strip above the keyboard pulled off to reveal hidden screws.
Thank you so much for this video. I managed to disassemble and clean my late mother's Toshiba Satellite L655 laptop. It was my first time doing this on a laptop. Everything went smoothly. The laptop is now cooling itself perfectly!!
Thank you very much for the Video. The second Laptop that i cleaned today (earlier before a lenovo x220). But this one was much easier, you have much more space. Running smooth again. Now its getting a ssd and it should be good for another few years!
Thanks for the video! What type of gloves are you wearing & what is the brush type? Is it natural or synthetic? I am trying to gain insights into any necessary precautions & the reasons for them, as I have no prior experience with this except for replacing my laptop screen; I took no precautions at that time except to unplug the computer & remove the battery first. Also, It would be great if you could label those parts you're removing! :)
Thanks for sharing. I cleaned my Toshiba laptop and replace thermal paste according to video. However, there is no display in the screen, so connected another TV with HDMI cable, but still no display. I think, there is a problem in gpu or motherboard. How can i fix it?
Hi, The maximum RAM the C670 can take is actually 16 GB (PC3-10600) & the maximum CPU that is still supported is an i7 2670QM. 😉😎😆 I've read on forums that maybe an i7 2860QM/2960XM too could fit... 😑 In fact I've read on 3 Russian sources (websites) that you could squeeze in an i7-2820QM or i7-2860QM CPU on the motherboard. 🤔😲😨😕 With that the faster DDR3 RAM could be added as well (1600 MHz I mean here). 😇🤗 AIDA64 software even suggests the HM65 chipset could support an insane amound of 32 GB ! So 2x 16 GB DDR 1600 MHz type. But those cost like a minimum of $240... 🤔😨😳 Best Regards,
Hello Sir i need help. after i clean my toshiba L655 loptop and assemble it when i plug in the ac source it turn wont turn on but the power led light it blink after i forcely pluged in the ac source what should be the problem?? I Hope you can answer my question immediately because i really need to use it my loptop
I'd replace the CPU on this laptop. It is currently i3 330m. I'd like to put some of the following: i7 640m, i7 620m, i7 740QM, i7 720QM, i5 580m or i5 560m. Does this motherboard support any of the specified processors? Thanks for the answer.
Skander Kamoun I think it should be just a metal clip holding it. Instead of pushing side wise (the cmos battery) try to stick in a thin object between the clip and battery and between the motherboard and battery. I doubt there would be an actual glue there.
once again overkill why did you take the ram out to just clean the cooling fan you made this look much harder than it was when a can of compressed air would of did a better job plus the laptop wouldnt even need to be took apart wow great job thanks for nothing my thought
Hello Sir i need help. after i clean my toshiba L655 loptop and assemble it when i plug in the ac source it turn wont turn on but the power led light it blink after i forcely pluged in the ac source what should be the problem?? I Hope you can answer my question immediately because i really need to use it my loptop
Hello Sir i need help. after i clean my toshiba L655 loptop and assemble it when i plug in the ac source it turn wont turn on but the power led light it blink after i forcely pluged in the ac source what should be the problem?? I Hope you can answer my question immediately because i really need to use it my loptop
***ENG: Links to screwdrivers and parts in the description under the video*
***RUS: Ссылки на отвертки и заменяемые детали в описании под видео*
Hey! I have a question. Is this laptop good for gaming?
Thank you for making this video and keeping it up. My Toshiba has been running almost non stop for 13 years and this video helped me get in to replace the thermal paste and service the fan. I would have never guessed that strip above the keyboard pulled off to reveal hidden screws.
This was my first laptop clean and it was a success thanks to this video, now the laptop is working like a charm again, thank you
Thank you so much for this video. I managed to disassemble and clean my late mother's Toshiba Satellite L655 laptop. It was my first time doing this on a laptop. Everything went smoothly. The laptop is now cooling itself perfectly!!
Дело мастера боится. Отличная работа. Ещё бы реверс добавить для сборки, пусть даже в ускоренном режиме.
Thank you very much for the Video.
The second Laptop that i cleaned today (earlier before a lenovo x220).
But this one was much easier, you have much more space.
Running smooth again. Now its getting a ssd and it should be good for another few years!
Thanks for the video! What type of gloves are you wearing & what is the brush type? Is it natural or synthetic? I am trying to gain insights into any necessary precautions & the reasons for them, as I have no prior experience with this except for replacing my laptop screen; I took no precautions at that time except to unplug the computer & remove the battery first. Also, It would be great if you could label those parts you're removing! :)
Thanks! This is great! Going to do it tomorrow! Can you upgrade the CPU and Graphics card in this model?
+E Fox you can upgrade CPU, but there is no way to upgrade GPU
Hi, thanks for the fast reply! Think I'll go ahead and upgrade the CPU and RAM.
Thanks for sharing. I cleaned my Toshiba laptop and replace thermal paste according to video. However, there is no display in the screen, so connected another TV with HDMI cable, but still no display. I think, there is a problem in gpu or motherboard. How can i fix it?
Did you get it working?
@@jamesfranko5098 No, still broken
You've helped me a lot. Thank you!!!
Hi,
The maximum RAM the C670 can take is actually 16 GB (PC3-10600) & the maximum CPU that is still supported is an i7 2670QM. 😉😎😆
I've read on forums that maybe an i7 2860QM/2960XM too could fit... 😑
In fact I've read on 3 Russian sources (websites) that you could squeeze in an i7-2820QM or i7-2860QM CPU on the motherboard. 🤔😲😨😕
With that the faster DDR3 RAM could be added as well (1600 MHz I mean here). 😇🤗
AIDA64 software even suggests the HM65 chipset could support an insane amound of 32 GB ! So 2x 16 GB DDR 1600 MHz type. But those cost like a minimum of $240... 🤔😨😳
Best Regards,
Hey! I have a question. Is this laptop good for gaming?
İ have no for gaming man
Which games
Hello Sir
i need help.
after i clean my toshiba L655 loptop and assemble it when i plug in the ac source it turn wont turn on but the power led light it blink after i forcely pluged in the ac source what should be the problem??
I Hope you can answer my question immediately because i really need to use it my loptop
Thank you so much. Subscribed.
Great Job. Thanks a lot!
Mrb. Sayenizde kendi işimi kendim düzgün bir şekilde yaptım. Teşekkürler. Abone oldum. Like attım. 👍
I'd replace the CPU on this laptop. It is currently i3 330m. I'd like to put some of the following: i7 640m, i7 620m, i7 740QM, i7 720QM, i5 580m or i5 560m. Does this motherboard support any of the specified processors? Thanks for the answer.
what's laptop's model?
@@RegeleEdge satellite l650
@@kokosbambus idk i have L655
@@RegeleEdge motherboard is same
@@kokosbambus if u say... my laptop has an i5 480m in it
Im terrified thinking of disassembled (my own) laptop,
Because when I put it back together it won't turn on or something
It definitely will turn on if you re-assemble correctly. I've taken a few laptops apart and I can say that it's not something to be afraid of.
Really great job :) BUT HOW THE HECK TO ASSEMBLE IT??????????????????!!!!!!!!!!!!!
+Belkahla Achraf Watch movie from the end ;D. P.S. Great movie I cleaned my laptop and changed thermal paste, thanks!
thanks! it helped a lot
How to remove the cemos battery to replace it ? it is glued on it ?
Skander Kamoun I think it should be just a metal clip holding it. Instead of pushing side wise (the cmos battery) try to stick in a thin object between the clip and battery and between the motherboard and battery. I doubt there would be an actual glue there.
Yeah I finally figured it out and i had a graphic card problem. Now it's fine thanks a lot
You are King
para que los guantes?
Top!!
You unscrewed the cpu cooler in the wrong way, you gotta do it crosswise otherwise you risk damaging the cpu die..
it didn't want to turn on when I got it all together again.. it give me lights that it has power but doesn't work!
what can be the problem?
Ayman Reddah i can turn on but the screen wont respond
6:40 i have a glue here which I cannot get rid off :/
Спасибо!
My laptop stop working after applying this 😢
Yeah i did it well
once again overkill why did you take the ram out to just clean the cooling fan you made this look much harder than it was when a can of compressed air would of did a better job plus the laptop wouldnt even need to be took apart wow great job thanks for nothing my thought
Are you sure about this?
Hello Sir
i need help.
after i clean my toshiba L655 loptop and assemble it when i plug in the ac source it turn wont turn on but the power led light it blink after i forcely pluged in the ac source what should be the problem??
I Hope you can answer my question immediately because i really need to use it my loptop
Hello Sir
i need help.
after i clean my toshiba L655 loptop and assemble it when i plug in the ac source it turn wont turn on but the power led light it blink after i forcely pluged in the ac source what should be the problem??
I Hope you can answer my question immediately because i really need to use it my loptop
Do you know how to fix it?
@@angelesc2033 actually no sir but i carefully disassemble it with care
MOHAMMADTAHA M. LABUAN JR. I am having the same issue as I was reapplying the thermal compound because my laptop was overheating
MOHAMMADTAHA M. LABUAN JR. your laptop is still broken?
@@angelesc2033 for now its working but in other charger not its original charger