It would only take me a month to design my own, another month to build it, but a full year to find all the hardware. JSK's designing and building skills are great, his shopping skills are much greater!
Spot on Bob. I've watched this guy for years now and he always amazes me with the parts he uses. I'd have no idea where to start shopping where I live.. That extruded aluminium or whatever it is appears quite regularly but I've never seen it anywhere else but on this channel 🤣
@@Blade1310 These profiles are industry standard. You see this a lot in factories for almost all simple constructions. Here in Germany there's a company called ITEM. They sell all kinds of different parts among those profiles. But there are also a lot of noname brands which are a little cheaper.
@@Watchyn_YarwoodI’ve built from several of JSK’s plans and they are not all brazillion dollar projects. Sure this one is pricey, but if you need a tool like this one, you’d pay significantly more for the store bought version and it wouldn’t be nearly as well built. As far as the cleanliness goes - we should all be striving to improve our work environments. Less clutter is more productivity.
I must admit I envy him for being able to find the parts but also knowing what they are called. Most times I am trying to find parts for projects, I know what I want but don't know what it is actually called, so, I spend days trying different combinations until I get close then refine from there, mostly, I compromise.
During 19 minutes I was desperate, no Double Side Tape. And then at the 20 minutes mark it appears! If one day there is a competition about overengineering with Germany, Mr JSK shall represent Japan.
Very nice design 👍you could add a small shock absorber so the saw doesn't slam down on the end stop so hard when done. Also it would be great to have a vice on each side of the saw blade to hold everything in place for larger pieces and prevent a burr at the end.
Two possible refinements but I could not help thinking that one might want apply some coolant whilst cutting... remembering the machines from school metal work and the time I worked in a factory (aged 14)
У меня сложилось устойчивое ощущение, что кнопка "стоп" долго не проживет, при такой падающей массе на нее в конце реза. А так - конструкция действительно изящная. Респект автору.
What an elegant machine. I love how you built this. Strong but very attractive. Works like you said. Power Hacksaw. Very accurate. I'm impressed. like to see someone try to cut that as well as your machine!
Nice work, but I have a feeling that rthe same amount of money (or maybe a bit more) you can buy a.small bandsaw which works faster and more capable ,(like cut in angles, upgrade possibilities, etc.)
My thoughts exactly! If I had to buy all these parts in the Netherlands, I could buy a nice pre build alternative. And how often do you need to cut that thick rods.
@@wimjanssen8270 If you make things with a lathe then very often :) Also this could be used for various things, like cutting aluminium profiles, steel square tubes, tubes, or various profiles, etc. But if you do that, then probably you want a machine for it, otherwise even this would be beyond the limit. Or there are other machines. Like many woodworker use a chopsaw to cut alu-profiles, most modern tungsten carbide blades could handle it easily. (Or just use a specialized blade).
Absolute fantastic build, million times better than the previous one and a bit more pricy 😉. Your work is much more than masterclass, I am waiting for your next projects, greatings from Germany.
Bonjour Monsieur, c'est bien la première fois que je constate une anomalie dans vos excellentes et formidables réalisations. Dans le mouvement d'une scie à main, l'aller coupe et le retour de la scie se fait en soulageant le poids que vous exercez sur la scie afin de ne pas user exagérément la lame. Dans votre cas la force du retour reste identique à celle du mouvement "aller" et c'est antimécanique. Merci pour vos surprenantes réalisations vidéo qui sont vraiment professionnelle et "haut de gamme" !
I built a hacksaw for 60 dollars. The motor is dc operated and is speed controlled. I got this stuff from Taobo for only 30 dollars. It features two 12 volts lithium batteries and so it was a cordless device , which can be used everywhere without AC supply.
Very cool. Probably needs a bumper/stopper at the bottom to take the impact at the end. An option would be to add an intermediary spring above the off switch to damp the shock. I could see that switch failing after a few hundred cycles. Move the switch down and add an additional L-bracket above with a spring loaded pin that when it bottoms out, just touches the switch. It would take all the impact making it last much longer.
I remember when Meccano set 10 was the thing of dreams! Thanks for this video. I didn't realize the cost of these extrusions had come down so much. I just remember how expensive the Festool ones we used at work were.
Nice job. Two things that will make this better: 1) a hydraulic cylinder to control the downward pressure. 2) a mechanism to lift the blade up on the return stroke.
Уже несколько лет смотрю Ваши ролики, уважаемый.. Очень нравится культура и точность при производстве механизмов и приспособлений. Равняюсь на Вас в своём хобби. Спасибо.
It turned out to be a wonderful machine! I would add a small reservoir and coolant pump only. And of course a base to collect and filter the fluid when working
Something most people fail to acknowledge, a power hacksaw is so much QUIETER than an angle grinder, more accurate with a narrow kerf so less material waste. This isn't a cheap project but a good power hacksaw (if you can find one less than 75 yrs old) or bandsaw isn't cheap either
Brillant as usual! I would be so interested to see how you design such a project. Do you use a software (like Fusion 360)? Do you simply draw sketches? Or are you doing this totally out of your head?
Just sublime, the concept, creation of the parts, bolting together, the aesthetics are just on another level ... just watching this machine being constructed was fantastic, the actual operation was just the icing on the cake 👍 Some people ask why go to all this trouble when you could just buy a machine, they just don't understand the satisfaction of creating your own tools, not only that but this is probably of a superior construction to readily available machines.
It is a wonderful piece of art! , where can you find all parts, hardware, and I think this is very expensive to built, as a hobby it’s ok. Sir you did an excellent job!!!
It's always a pleasure to watch you put these very interesting tools together! Nicely done. While this is pretty automatic, I wonder if a metal cutting bandsaw (Rigid makes several affordable models) might not be a better choice for this? The motor and controller alone would cost about the same I think...
Almost all small bandsaw types require you to "hang around", as they cut fast. Not necessarily a disadvantage, but a power hacksaw can just run in the background while you are doing other things. The other advantage is small power hacksaws use cheap readily available hand hacksaw blades. Or in this case, the hand hacksaw! I have an old Covel Excel - later sold as Craftsman by Sears - that I use 5/8" heavy duty hand hacksaw blades with. over the last 10 years I've made thousands of cuts with it, don't know how I got along without it.
Nice design and build project. However, I am not sure how much all of that cost. The tool market is full of options from the high-end to "GOOD ENOUGH" tools made mostly in China that are so cheap here in the US that it is hardly worth the effort to make one unless it is unique in its functionality. All that said you have a very creative Maker with all the skills needed to make anything you can think of
Nice build. But one very important factor . You need to use a cam follower on the reciprocating beam so the blade does'nt drag on the teeth on the back stroke. You will overheat your part and wear the blade out. The blade can only cut on the power stroke. Hope i dont come across as a smart arse.
👌👌👌👍🏾 - Once again you have built a technical marvel! My admiration! I am a trained precision mechanic and industrial photographer, - and the aesthetic aspect therefore always flows into my assessments. Great compliments, - great master. Many greetings from Mainz Nick
Great stuff from JSK as usual. Thanks. I have a mill with a speed controller, but it has a big fan blowing through the motor at full speed at all times. Running some motors at slow speed for any prolonged period may lead to overheating as their own internal fan blades do not rotate fast enough. I have an old saw of this type. It uses a much more robust blade and the vice can be rotated. Cutting 45 degrees is very useful. As always I see tools and fittings that I have never seen before. I suspect every morning JSK receives an enormous parcel of kit from various manufacturers to showcase on these videos with offers to cut iron or aluminium at any size he wants. Tools and even bicycle bits arrive as well. This must be a great advantage. Keep up the good work.
Beautiful precision, but I’m wondering what is applying downward pressure on the cut piece other than gravity from the weight of the machines arm. Do you need to also hold the handle and apply additional down force???
This is a really great tool that you build here. This is so perfectly made that it is possible to see it trough the magnificent motion of it. What is result is much more close to perfection than the perfection is close to herself. The pleasure of seeing you working is still there, even when you are not working with wood. It is never possible to tell what is the best : your skills, you being meticulous and clean, seeing the Masterpiece being built, the result or the quality of what it can be made with. Domo Arigato Gozaimasu Sensei.
That kind of looks a lot like a garage door mechanism. I wonder if you could repurpose one of those (I had one die on me a few years ago) into something like this.
Thank god this man’s inclinations lean more toward diy tools rather than world domination… I mean let’s face it, the very last thing we need right now is some evil scientist super villain type running around building death rays or mind control serums or any number of the countless ideas beyond the scope of my feeble understanding…. Yes… may we all give thanks… Oh yeah also, another amazing upload brother! Beautiful work as always
Really good, but what i miss is a feature to lift up the blade a bit when it strocks back. Without that, the blade will be wear out much earlier, the more if u saw steel.
@@1SCme Cooling is, on my opinion, not necessary at this slow speed, but, when it cuts often material like aluminium, a lubrication on the blade can really make sense.
@@renetr6771 ...or he could add cooling water and cut faster... I do like the limit stop switch, would like to see a manual e-stop switch on any homemade shop equipment (I want to add to workshop receptacles), rest seems like overkill - these are some expensive components he's putting into this. Not sure how you would life the blade on the backstroke because its depth is changing, but you might be able to add a counterweight, moved by a cam on the motor shaft, to take the weight off the blade. I am in the process of getting a custom home with a large workshop, a hacksaw cutting machine is on my list of projects, so I am picking up bits and pieces.
A prescindere dalla utilità, rimane sbalorditiva l'eleganza con la quale sono eseguiti i lavori. Da parte mia , ho gia nominato JSK in alcuni video di altri.Resta il mio preferito.!!!
Amazing.. I know they're countless craftsmen around.. it's an hightech industrial grade machine.. bit unfair to call it "homemade" though it is homemade.. great job done by those skilled hands ..👍
@@cho4d .. I'm smiling you're right brother.. that's what I said that it's an industrial "grade" machine made with hands.. industrial robots can't shake while human hands do.. still produce as you mentioned novelty piece..
No offense intended, I really love your work, but just the parts alone would cost more than a WEN or Grizzly floor standing model. Again, beautiful work.
1 -- looks as though it could use a vacuum hose to suck up the metal dust. 2 -- might be interesting to put in two vices, and a number of hacksaw blades, to allow it to do multiple sliceouts at once. Might need more weight on the outer edge to do that quickly. 3 -- might, perhaps, use an oil sprayer/dripper at the cut spot, to help increase blade life and reduce heat buildup. Long vid, good work, as usual, sir!!
Nice work. But given the availability of old used cold saws out there, I personally will go for that option. I will get better quality, and it will probably cheaper too, and a lot less hours spent.
A nicely designed and well built project. Depending on the production run needs, I would think a lathe and parting tool could be more effective. A capstan type lathe even more so. I admire the design work and the careful assembly. Efficiency of production would probably dictate using a commercial machine or considering another method. CNC machining is a worthwhile alternative.
As a young trainee I was taught that parting on a lathe is the most difficult to pull off (well besides trepannig). All your settings must be perfect and then there is the cutting fluid selection that must be concocted to match the material that is encountered. . Not only that, the parting tool thickness for that material and diameter would need to be a minimum of .125 width. This width would create a lot of waste for your typical home shop. Most hack saw blades run between .025 & .063 in blade thickness. Also, take into account that most home shops don't have CNC equipment. Many years ago I bought a power hacksaw for under 100.00. I use it to cut material over .750 in dia or square. I has proven to be quite a time saver. Oh, hack saw blades can be had for pennies at garage sales. Cheers.
@@williamparker8318 Ex toolmaker here so I can happily disagree. Of course I recognise that home work and business are different propositions and often require different approaches.
Das Sägeblatt sollte mittels Bohrwasser - Kreislauf gekühlt werden. Eine Auffangwanne mit Pumpe wäre erforderlich sowie ein Sieb. Eventuell ein Stärkeres Sägeblatt. 👍
Question is... how much would the aluminum frame, hardware, motor, controller etc. added up to? Would it be less than a used bandsaw? I bought mine for $100. Really nice workmanship. It was a pleasure to watch.
![[TH] 2024 PMSL SEA W1D5 | Summer | เก็บคะแนนสู่รอบไฟนอล สัปดาห์แรก](http://i.ytimg.com/vi/jSlV6eB1f9k/mqdefault.jpg)
If you like the video, please introduce it to your friends and social media !
Thank you! 👍💪✌
Love the build. Thank for the video.
Yours is way too over complicated and not easy to build yourself. My mates dad was a toolmaker, he built a sturdier and simpler one 50 years ago.
Если есть мотор - пила ленточка и проще быстрее. Дёргает дёргает рука - прошлый век.
😮😮😮😮😮😮 by
It would only take me a month to design my own, another month to build it, but a full year to find all the hardware. JSK's designing and building skills are great, his shopping skills are much greater!
If everyone had 12 brazillion dollars and a surgical lab to work in....
Spot on Bob. I've watched this guy for years now and he always amazes me with the parts he uses. I'd have no idea where to start shopping where I live.. That extruded aluminium or whatever it is appears quite regularly but I've never seen it anywhere else but on this channel 🤣
@@Blade1310 These profiles are industry standard. You see this a lot in factories for almost all simple constructions. Here in Germany there's a company called ITEM. They sell all kinds of different parts among those profiles. But there are also a lot of noname brands which are a little cheaper.
@@Watchyn_YarwoodI’ve built from several of JSK’s plans and they are not all brazillion dollar projects. Sure this one is pricey, but if you need a tool like this one, you’d pay significantly more for the store bought version and it wouldn’t be nearly as well built.
As far as the cleanliness goes - we should all be striving to improve our work environments. Less clutter is more productivity.
I must admit I envy him for being able to find the parts but also knowing what they are called. Most times I am trying to find parts for projects, I know what I want but don't know what it is actually called, so, I spend days trying different combinations until I get close then refine from there, mostly, I compromise.
During 19 minutes I was desperate, no Double Side Tape. And then at the 20 minutes mark it appears! If one day there is a competition about overengineering with Germany, Mr JSK shall represent Japan.
Very nice design 👍you could add a small shock absorber so the saw doesn't slam down on the end stop so hard when done. Also it would be great to have a vice on each side of the saw blade to hold everything in place for larger pieces and prevent a burr at the end.
Yes, the drop at the end looks a little violent. Maybe also move the end switch a little higher to reduce the height of the drop?
actually as the machine reaches the final level it must slow down and must have a soft close system
Two possible refinements but I could not help thinking that one might want apply some coolant whilst cutting... remembering the machines from school metal work and the time I worked in a factory (aged 14)
@@ravebrave8866 Вы правы.
Желательно иметь плавный, конечный выход распилевания.
У меня сложилось устойчивое ощущение, что кнопка "стоп" долго не проживет, при такой падающей массе на нее в конце реза.
А так - конструкция действительно изящная. Респект автору.
What an elegant machine. I love how you built this. Strong but very attractive. Works like you said. Power Hacksaw. Very accurate. I'm impressed. like to see someone try to cut that as well as your machine!
This is the most overengeneered hacksaw i've ever seen, and the cost of materials is ridiculous. Such a pleasure to watch though.
I like how it uses the entire blade. Most of these I've seen have a short cut stroke. This one take advantage of the whole blade.
That was my first observation too..., but it depends of the width of the stock. Can the blade cover the full width of the vice?
Nice work, but I have a feeling that rthe same amount of money (or maybe a bit more) you can buy a.small bandsaw which works faster and more capable ,(like cut in angles, upgrade possibilities, etc.)
@@guitar-jo and complexity increases also the work is get slower because of the continuous transition and setup.
My thoughts exactly! If I had to buy all these parts in the Netherlands, I could buy a nice pre build alternative. And how often do you need to cut that thick rods.
@@wimjanssen8270 If you make things with a lathe then very often :) Also this could be used for various things, like cutting aluminium profiles, steel square tubes, tubes, or various profiles, etc. But if you do that, then probably you want a machine for it, otherwise even this would be beyond the limit. Or there are other machines. Like many woodworker use a chopsaw to cut alu-profiles, most modern tungsten carbide blades could handle it easily. (Or just use a specialized blade).
Yeah, but it wouldn't be DIY porn then...
Riding horses backwards was epic then
This is a very good improvement to your last design. I do really like the the automatic stop and start mechanism. Well done. 👌
Absolute fantastic build, million times better than the previous one and a bit more pricy 😉. Your work is much more than masterclass, I am waiting for your next projects, greatings from Germany.
Mister JSK, você é um excelente professor funcional da paciência para ensinar como se faz e como tomar gosto e jeito pelo que gosta. Nota 1000.
Как говорится, у самурая нет цели, только путь :) Видос очень увлекательный!
Kanał JSK-koubou świetny. Projekty i wykonanie znakomite.
Nice! I'd try to use it with a Japanese pull saw and use it as a very quiet and accurate wood saw.
Bonjour Monsieur, c'est bien la première fois que je constate une anomalie dans vos excellentes et formidables réalisations. Dans le mouvement d'une scie à main, l'aller coupe et le retour de la scie se fait en soulageant le poids que vous exercez sur la scie afin de ne pas user exagérément la lame. Dans votre cas la force du retour reste identique à celle du mouvement "aller" et c'est antimécanique. Merci pour vos surprenantes réalisations vidéo qui sont vraiment professionnelle et "haut de gamme" !
I built a hacksaw for 60 dollars. The motor is dc operated and is speed controlled. I got this stuff from Taobo for only 30 dollars. It features two 12 volts lithium batteries and so it was a cordless device , which can be used everywhere without AC supply.
Very cool. Probably needs a bumper/stopper at the bottom to take the impact at the end. An option would be to add an intermediary spring above the off switch to damp the shock. I could see that switch failing after a few hundred cycles. Move the switch down and add an additional L-bracket above with a spring loaded pin that when it bottoms out, just touches the switch. It would take all the impact making it last much longer.
I remember when Meccano set 10 was the thing of dreams!
Thanks for this video. I didn't realize the cost of these extrusions had come down so much. I just remember how expensive the Festool ones we used at work were.
Thanks for your comment.
I will be making various tools.
I would be happy if I could help many people.
Nice job. Two things that will make this better: 1) a hydraulic cylinder to control the downward pressure. 2) a mechanism to lift the blade up on the return stroke.
Уже несколько лет смотрю Ваши ролики, уважаемый.. Очень нравится культура и точность при производстве механизмов и приспособлений. Равняюсь на Вас в своём хобби. Спасибо.
It turned out to be a wonderful machine! I would add a small reservoir and coolant pump only. And of course a base to collect and filter the fluid when working
Most off the cuts are probably non-ferrous stuff, and I think there is no need for industrial level cutting speeds😅.
No coolant is needed.
@@Bob_Adkins Industrial machines need 'coolant', which serves several purposes other than cooling.
@@BTW... That machine would last 2-3 days of industrial use, but a lifetime of home use. No coolant necessary!
@@Bob_Adkins So, you think cutting fluids are only used as coolant?
Something most people fail to acknowledge, a power hacksaw is so much QUIETER than an angle grinder, more accurate with a narrow kerf so less material waste.
This isn't a cheap project but a good power hacksaw (if you can find one less than 75 yrs old) or bandsaw isn't cheap either
Another excellent example of your workmanship
absolutely wonderful build, I always love to see what you do.
Vc e de uma habilidade , cuidadoso,, calmo, um gênio, parabéns ❤
That's a nice machine. Very well built.
The criticism from the last saw was implemented very well. Now she's perfect. I just think that you could buy one for the cost of the materials. 👍👍👍👍👍
Always learn something from your videos. Thank you.
Brillant as usual! I would be so interested to see how you design such a project. Do you use a software (like Fusion 360)? Do you simply draw sketches? Or are you doing this totally out of your head?
That adjustable brass bearing is lovely. Inspiring as always, thanks.
Love it. Really like the fact that the machine just does such a nice cut. Keep up the good work.
Love and enjoy watching and your willingness to share your genius with us mere mortals. Excellent as always.
Just sublime, the concept, creation of the parts, bolting together, the aesthetics are just on another level ... just watching this machine being constructed was fantastic, the actual operation was just the icing on the cake 👍
Some people ask why go to all this trouble when you could just buy a machine, they just don't understand the satisfaction of creating your own tools, not only that but this is probably of a superior construction to readily available machines.
Superb engineering and craftsmanship. Bravo!
It is a wonderful piece of art! , where can you find all parts, hardware, and I think this is very expensive to built, as a hobby it’s ok. Sir you did an excellent job!!!
Beautiful build as usual. Any idea what all that hardware, motor, and assorted pieces costs?
It's always a pleasure to watch you put these very interesting tools together! Nicely done. While this is pretty automatic, I wonder if a metal cutting bandsaw (Rigid makes several affordable models) might not be a better choice for this? The motor and controller alone would cost about the same I think...
Almost all small bandsaw types require you to "hang around", as they cut fast. Not necessarily a disadvantage, but a power hacksaw can just run in the background while you are doing other things.
The other advantage is small power hacksaws use cheap readily available hand hacksaw blades. Or in this case, the hand hacksaw!
I have an old Covel Excel - later sold as Craftsman by Sears - that I use 5/8" heavy duty hand hacksaw blades with. over the last 10 years I've made thousands of cuts with it, don't know how I got along without it.
Beautiful power hacksaw. We shared this video on our homemade tools forum this week 😎
Thanks
that extruded aluminum tubing is really cool.
like a giant Erector-Set for big kids.
Nice design and build project. However, I am not sure how much all of that cost. The tool market is full of options from the high-end to "GOOD ENOUGH" tools made mostly in China that are so cheap here in the US that it is hardly worth the effort to make one unless it is unique in its functionality. All that said you have a very creative Maker with all the skills needed to make anything you can think of
I don't think anyone is making and selling Power Hacksaws anymore. There aren't any on Aliexpress...
Nice build. But one very important factor . You need to use a cam follower on the reciprocating beam so the blade does'nt drag on the teeth on the back stroke. You will overheat your part and wear the blade out. The blade can only cut on the power stroke. Hope i dont come across as a smart arse.
I guess this should also be true of Die Filer tables yet I've never seen a mechanism which takes the return stroke tooth vulnerability into account.
Respect for the design and for great job!
👌👌👌👍🏾 - Once again you have built a technical marvel!
My admiration!
I am a trained precision mechanic and industrial photographer, - and the aesthetic aspect therefore always flows into my assessments.
Great compliments, - great master.
Many greetings from Mainz
Nick
В 80х работал на заводе, там такие станки, советские, трудились! Только проще и эффективнее. А это... наверное даже Festool, не сделал бы дороже.
Wow, much better than the last one you made.
Good job
Money and unnecessary expensive parts and materials are not a problem for this guy!
I like this very much indeed. No more complicated than necessary. A beautiful construction and not only that, very useful.
I love your Content so much. Thank you for sharing your knowledge!
Outstanding video and a great design. Thanks for posting this!
Great stuff from JSK as usual. Thanks. I have a mill with a speed controller, but it has a big fan blowing through the motor at full speed at all times. Running some motors at slow speed for any prolonged period may lead to overheating as their own internal fan blades do not rotate fast enough.
I have an old saw of this type. It uses a much more robust blade and the vice can be rotated. Cutting 45 degrees is very useful. As always I see tools and fittings that I have never seen before. I suspect every morning JSK receives an enormous parcel of kit from various manufacturers to showcase on these videos with offers to cut iron or aluminium at any size he wants. Tools and even bicycle bits arrive as well. This must be a great advantage. Keep up the good work.
Excellent work 👍👍👍. Thank you for sharing. Be safe 🇨🇦
Excelente criatividade, parabéns!!!👏👍✌️
Just genius! This guy is awesome! 🤯
you my friend are a mad genius , i love it
Beautiful precision, but I’m wondering what is applying downward pressure on the cut piece other than gravity from the weight of the machines arm. Do you need to also hold the handle and apply additional down force???
You must have missed the weight installed above the saw from 16:30 - 17:07 that slides to adjust the pressure.
Men now you made great upgrades !!! Good job 👍👍👍
How accurate is the cut? In my experience the blade of these saws flexes (because of small height and long length) even if you keep it very precise.
This is a really great tool that you build here.
This is so perfectly made that it is possible to see it trough the magnificent motion of it. What is result is much more close to perfection than the perfection is close to herself.
The pleasure of seeing you working is still there, even when you are not working with wood.
It is never possible to tell what is the best : your skills, you being meticulous and clean, seeing the Masterpiece being built, the result or the quality of what it can be made with.
Domo Arigato Gozaimasu Sensei.
That kind of looks a lot like a garage door mechanism. I wonder if you could repurpose one of those (I had one die on me a few years ago) into something like this.
Criatividade associada com o prazer do ensino e com o talento da execução. Obrigado pela inspiração de um mestre!
Very clever but expensive to make it would cheaper to buy one i think
Moc hezké video a šikovný člověk, ale za vynaloženou energii, čas a cenu všeho materiálu mám slušnou profi pásovou pilu.
Thank god this man’s inclinations lean more toward diy tools rather than world domination… I mean let’s face it, the very last thing we need right now is some evil scientist super villain type running around building death rays or mind control serums or any number of the countless ideas beyond the scope of my feeble understanding…. Yes… may we all give thanks…
Oh yeah also, another amazing upload brother! Beautiful work as always
Really good, but what i miss is a feature to lift up the blade a bit when it strocks back. Without that, the blade will be wear out much earlier, the more if u saw steel.
Also set up an adjustable line and collection tray to slowly drip water (or oil) to cool the blade.
@@1SCme Cooling is, on my opinion, not necessary at this slow speed, but, when it cuts often material like aluminium, a lubrication on the blade can really make sense.
@@renetr6771 ...or he could add cooling water and cut faster...
I do like the limit stop switch, would like to see a manual e-stop switch on any homemade shop equipment (I want to add to workshop receptacles), rest seems like overkill - these are some expensive components he's putting into this.
Not sure how you would life the blade on the backstroke because its depth is changing, but you might be able to add a counterweight, moved by a cam on the motor shaft, to take the weight off the blade.
I am in the process of getting a custom home with a large workshop, a hacksaw cutting machine is on my list of projects, so I am picking up bits and pieces.
Que projeto incrível, a máquina é perfeita! 👏👏👏👏👏👏👏👏👏👏
custo beneficio nao compensa o trabalho , mais barato comprar uma serra de fita , mais pratica e barata
@@pompeusantos5795 Ou um policorte com serra ASM. E inversor de frequência. Bonito de ver o trabalho JSK.
PARABÉNS DE BRASIL!!!
Seus projetos e seu capricho é incompatível.
projeto que nao compensa fazer pelo custo dos materiais e mao de obra
Me encanto ! Ya podemos hacer nuestras momedas de oro !
A prescindere dalla utilità, rimane sbalorditiva l'eleganza con la quale sono eseguiti i lavori. Da parte mia , ho gia nominato JSK in alcuni video di altri.Resta il mio preferito.!!!
Well done Kobu...but you need to add some oil to the work piece
Slick!
Have you considered adding a recirculating coolant system?
Marvelous build. If I might ask, what was the cost of the components?
Not cheap.
Possibly the most expensive way to achieve the result.
Great work jsk. Where do you find all your. Peaches parts! LOL appreciate you to share exactly where you get everything. LOL love you man thank you.!
Amazing.. I know they're countless craftsmen around.. it's an hightech industrial grade machine.. bit unfair to call it "homemade" though it is homemade.. great job done by those skilled hands ..👍
industrial it most certainly is not. this is a novelty tool that a bandsaw makes obsolete to be perfectly honest
@@cho4d .. I'm smiling you're right brother.. that's what I said that it's an industrial "grade" machine made with hands.. industrial robots can't shake while human hands do.. still produce as you mentioned novelty piece..
Great job.. No welding, lathe and expensive material.
Nicely done Koubouson
Maestro lei è ad un’altro livello, da piccolo mangiava latte con i Lego. I miei più sinceri complimenti
Absolutely great. As always. 👍😉
ハックソーですね、懐かしいなぁ。 しかもリンクを上手く使った早戻り機構を採用してる所に、感心します。
No offense intended, I really love your work, but just the parts alone would cost more than a WEN or Grizzly floor standing model. Again, beautiful work.
1 -- looks as though it could use a vacuum hose to suck up the metal dust.
2 -- might be interesting to put in two vices, and a number of hacksaw blades, to allow it to do multiple sliceouts at once. Might need more weight on the outer edge to do that quickly.
3 -- might, perhaps, use an oil sprayer/dripper at the cut spot, to help increase blade life and reduce heat buildup.
Long vid, good work, as usual, sir!!
Perfeito parabéns 👏👏👏👏
Nice work. But given the availability of old used cold saws out there, I personally will go for that option. I will get better quality, and it will probably cheaper too, and a lot less hours spent.
It’s not DYI, it industry level!!!❤🎉
A nicely designed and well built project. Depending on the production run needs, I would think a lathe and parting tool could be more effective. A capstan type lathe even more so. I admire the design work and the careful assembly. Efficiency of production would probably dictate using a commercial machine or considering another method. CNC machining is a worthwhile alternative.
As a young trainee I was taught that parting on a lathe is the most difficult to pull off (well besides trepannig). All your settings must be perfect and then there is the cutting fluid selection that must be concocted to match the material that is encountered. . Not only that, the parting tool thickness for that material and diameter would need to be a minimum of .125 width. This width would create a lot of waste for your typical home shop. Most hack saw blades run between .025 & .063 in blade thickness. Also, take into account that most home shops don't have CNC equipment. Many years ago I bought a power hacksaw for under 100.00. I use it to cut material over .750 in dia or square. I has proven to be quite a time saver. Oh, hack saw blades can be had for pennies at garage sales. Cheers.
@@williamparker8318 Ex toolmaker here so I can happily disagree. Of course I recognise that home work and business are different propositions and often require different approaches.
His hands always clean, no matter what he's building😅😅😅
While horizontal bandsaws do exist, this has so much more whimsy, while still managing to be practical.
the cut is astounding smooth
Very clever and well done. Good video. But, you can buy a metal band saw for considerably less than all those parts.
Great work, I really like this version. All its missing is a lifting cam and maybe a coolant mister.
Just curious, do you build many of these machines as design/fabrication exercises as a hobby compared to your normal 9-5 work?
Das Sägeblatt sollte mittels Bohrwasser - Kreislauf gekühlt werden. Eine Auffangwanne mit Pumpe wäre erforderlich sowie ein Sieb. Eventuell ein Stärkeres Sägeblatt. 👍
Parabéns pelo seu projeto bacana e perfeito do Brasil 👏👏👍👍🇧🇷🇧🇷💯❤️
Really nice build. If you put a course tooth blade on you would cut 40mm brass in less than 2 minutes.
Great job dude! Keep up the great work!
Quite wonderful as usual. I’m getting the sneaking suspicion that JSK is (not so secretly) sponsored by ‘Big Alu’.
Cutting heat? No cutting oil needed? Wonderful build!
Здравствуйте.
Без смазки - не будет качества обработки металла.
I love this gold coin cutter, just what I need
Question is... how much would the aluminum frame, hardware, motor, controller etc. added up to? Would it be less than a used bandsaw? I bought mine for $100.
Really nice workmanship. It was a pleasure to watch.
Waouh, époustouflant!👍👍Joli projet