I can see the element red hot and the fan is working when switched on but food is burning quickly.Is it the thermostat? The red temperature light doesn’t go out on the front of the cooker.Any ideas?
My belling oven's grill is faulty. It will glow red once turned on but after a while it just shuts off and goes back cool. Even with the temp still up. Do I replace the thermostat and capillary rod. The small thermostat part on the back. Or something else. Thanks.
@@eSpares yes..the light comes on and turns off with an audible click. The oven, that I'm guessing runs on the same thermostat does not switch off like the element does. My element has "sagged" towards the unsupported part which leads me to suggest it may need replacing. I will remove it and inspect it carefully for cracks or breaks.(the oven element had gone a year or so ago so I know what on looking out for) How would I test with a multimeter to check everything is in working order on the element? Thanks. J
Hi we suspect our fault with our select 600 by Diplomat is the cooling fan.The oven heats up and then goes dead.Light goes off.Nothing.After a short time the oven will work again but will continue to die after a short while.What do you think Please?
Hi Kev, this does sound like the overheat safety cut out is operating. This can be caused by a stuck main thermostat causing excessive oven temperature, poor airflow around the cabinet or more likely due to the cooling fan not running.
My logik electric fan oven is tripping the breaker after it has been on for 30 seconds. This has occurred since having the element replaced, which is working until it trips. The rest of the cover works fine. Any ideas ? Thanks
Hi Chris, you would need to trace the circuit to find out what was going down to earth causing the oven to trip, we have had new elements that are damp which can cause it to trip so dont rule that out. does everything work ok until you turn the temperature on?
hoover error code 02. nobody brings up error codes, the manuals are useless, they cant even explain buttons to set clock. press centre buttom then release all buttons on a touch button oven. my oven stopped heating up with error code 02. i tried steam cleaning and the element did heat up to create steam. if you call hoover, they want to send the engineer out and i rather buy a new oven, NOT hoover again. any thoughts? thanks
i cant turn my oven on because the clock pannel doesnt light up to set the timer but my hob and grill works i have just bought a new element and replaced it and it was working fine and then the clock panel went of can you help me please
I have a logik LBFANB12 if I cook at 100-150 all ok if I go above after about half an hour it blows the circuit and won't come back on till cooled down, any ideas
+kevan day The problem is likely to be the element but it is possible it could be the main oven element or the grill. It is most likely the main oven element so there is where we would start.
I have a Kenmore Electric Range that has an oven problem. When I turn the oven on bake the bake element does not come on but the broil element comes on at a very hot temperature. Would someone offer a suggestion as to what is wrong with my oven?
Examine it closely looking for cracks or blisters as it is likely the element has failed. You can check with a meter if there is a resistance through both parts of the element and if required replacement will be similar to this video: th-cam.com/video/j3GRS0nLHW0/w-d-xo.html
Please can you help me with some advice? I have a "Caple C2216" single electric fan oven. The oven was working fine one day but the next it appears to have no power? The clock is working: set correctly and not not in timer mode. When I turn the "Control" knob nothing works, not even the internal light or fan? I've checked all plug fuses and there is power to the oven. So my question is: What has happened since last using the oven that's now preventing it from working? Hope you can help? Thanks!
Hi Michael, we would suggest using a multimeter to trace the circuit from the terminal block to the switch if it is a connection issue you need to establish what components are OK first and if you are getting power to the controls.
Thank you for such an informative video, i've LAM3204 Model, fan/light is working but heating element stopped working. And same knob don't respond, needs to switch On/Off from Mains.
Hi Zeeshan,check the oven element with a multimeter, check the control knob by pulling it off to check if it is broke. we have a video on replacing the element th-cam.com/video/3-bwySCMG28/w-d-xo.html
Love all espares presentation - very professional, great tips and advice and has saved me a fortune in advice and parts not to mention I have learned to repair rather than replace everything in my kitchen doing my part for saving the environment - nice one guys
Its the internet in general. Imagine 20 odd years ago, we wouldnt of have had a clue. Ive fixed cookers, washing machines, tumble dryers, do all the work on my car, brought myself a mig welder and learnt to weld, fix other gadgets from TV's to mobile phones etc. Hey, if somethings broke, google it and there is near enough a "how to" on anything. And its all thanks to the world wide web and videos like this. Its great. Big thanks to guys like these sharing their knowledge. :D
Thanks for the comments Bob. With such a lot of information out there that sometimes it is difficult to find the good from the bad. We can all help by remembering to 'Like' videos and information that is useful. That way Google and You Tube will be able to filter the good stuff to the top making searching easier. :-)
Kenmore electric built-in oven model 790.48783901. It won't turn off. I shut off the breaker, and when I turned the breaker to it back on, the oven starts up again. "Stop" button beeps when pressed but doesn't stop it from working. Any suggestions? Thanks.
Hi J Lester, there are a few possible reasons and you will need a multimeter to test them, start by checking the elements as if they have shorted out. Test the thermostats and it,s possible it could be a relay or the control board, good luck.
This informative video saved me from physically assaulting my wife, after changing the oven element on a neff oven ,, did everything like for like but oven wouldn’t come on,, then the ball ache off the mrs started because it wouldn’t start , after numerous death threats and a threat of an unlimited time of fanny blankers off the wife ,, i looked up this vid ,, turns out i only needed to set the clock , boom leccy on , game on ,, man of match ,, i fix ovens now !!! , put a pie in then smashed the mrs ,, to the victor the spoils
My Beko built in Oven's cooling fan works but never turns off after use & I have to eventually turn off the mains after each use... Any Ideas? All I get from searches online is"It's suposed to do that" Yes I agree for 20 mins or so but not indefinitely!
My 3 year old AEG oven throws a F4 code (temp sensor) - fan works - oven doesn't - replaced temp sensor and didn't make any difference....any suggestions would be appreciated.
My DeDietrich FX4827 oven has symptoms that Josh says need clock reset (grill works but oven does not heat) but display shows IE 1 and clock controls don't do anything. Cant find any definition of error. Is it control board or door lock or thermostat? Any idea?
Hi Sal, start by checking the oven control switch first before looking at the connections to the board but as you can't test the board you need to go through the circuit until you have isolated the failed component.
I have an Estate Convection oven - ceramic top - that began pooping out yesterday. The burners work fine but the oven was dead and the digital display was blinking in an out in an erratic manor, like there was a bad electrical connection. Every so often it would begin beeping and flashing a code F1E1 which I understand means to replace the control board. I pulled the stove out, got my tools to pull the cover where the power pigtail connects so I could verify the correct voltage was making it to the stove. Before pulling the access panel I figured I should check the breaker, which was not tripped. I flogged the breaker on and off 4 or 5 times and went to the stove and pushed a couple of buttons and all is working now. Over sets and begins heating now, convection fan works etc. I will post again if it begins messing up again.
Hi Jeff, before you think the problem is cured check the cable connections both and the wall connection and as it is connected to your appliance, It is not to unusual for these to start burning and making a poor connection if they were not fully tightened on installation. If you catch the problem now you may just need to re tighten the connectors, leave it a bit and the burning may damage them and require replacement.
Hello, I wonder if you could help me. I have a Diplomat oven and the grill isn't heating up. The oven works fine but when it is on either of the two grill settings it doesn't get hot (all lights are on). I replaced the oven light last night as it had gone and when I came to use the grill this morning it blew the fuse box and the grill is now not working. Would this be the grill element? Many thanks!
Hi, I have a SMEG oven, the thermostat light is on but the Fan is not working and the element does not heat up either. Could it be the element or power to the fan? The element looks fine.
Hi, we have a Stoves 900G, model:059040305 which works as it should, except when the fan goes off (about 10min after switching off the grill or oven), it trips the RCD. What could it be? Thanks in advance
Hi, I have a Zanussi cooker model ZKC5020W1. Last night while using the oven it lost all power. The oven stopped heating up, the fan stopped working and the light went out. The hob works fine. The element was checked and all looks well, no hairline cracks or blow outs. Any ideas what the problem could be.
There is a thermal cut out at the back like shown at 2:25 www.espares.co.uk/product/es1554759 If this has tripped or the fuse to the appliance it will cause this problem.
Hi Josh. This is really helpful and I love that you reply to so many comments! My problem is that the bulbs inside the oven don't work, and neither does the 'heating up' light. Is there a fuse on the oven that might have shorted? I'm going to look at the back of the oven as you suggest, but I think anything after that is too dangerous for me to attempt. Additionally, the fan and lights on the extractor fan don't work... Thanks!
Hi, I have an AEG KM4400001M oven. When I'm done cooking the oven starts to cool down. This works for some time but then after it's almost completely cooled it start to mess with the system. It will stop the cooling down proces and start cooling down proces really quick which result in the oven turning on and off. If I unplug the oven and plug it in the next time I need it then it will work perfectly until it starts to cool down again. I'm not sure what the problem can be. I was thinking about the thermostat, but during the heat in the oven is consistent. I also do not think the cooling fan could be the problem because it cools down the oven for a couple minutes before the problem occurs. Can you help me with this problem, thanks. Ruud
Hi Ruud, check to make sure the cooling fan is coming on and working correctly if it's not cooling the control panel it could affect the PCB and cause issues, also make sure all the connections are not loose on the PCB.
Hi, we have a Stoves 900G, model:059040305 which works as it should, except when the fan goes off (about 10min after switching off the grill or oven), it trips the RCD. What could it be? Thanks in advance
Hi Lennonesque, if you have an insulation breakdown or a short it will cause the trip to go out, test the fan as you will need to find out which component is failing to cause it to trip.
Hi, I am just about to order part to replace as I think my thermostat is the issue. Wonder if you could confirm /advise please 2 days ago over only worked below 150degrees, grill and hob fine. Yesterday only grill and hob work, Today only the hobs work. I assume it is a faulty thermostat and not clock/an element for example but is there any way to be sure? Thank You
At 4:34 we talk about the oven temperature indicator. This should light when the elements are being heated and if the thermostat was faulty the light would not come on. However if the grill is not controlled by this (some models) it suggests a common problem between grill and oven so check the terminal block as the connections may be loose and burning. For information on the terminal block see our video: th-cam.com/video/YvQEDG-hNz4/w-d-xo.html
fault code hasF03 on my hotpoint si48454cix just decided it desnt want to switch on,,just displays the code , charming! any knowledge as to what it may be , many thanks
I have a zanussi oven zop37902xk, the oven came on actually on its own even when the dial was on 0 and it's showing error code po22, c325 and c can you give me an idea of what this may be, only had it 4 years and it's hardly used, I don't want to pay for an engineer and part replacement if it's cheaper to buy a new one, many thanks
Hi Rach, error code c325 is listed at flash memory failure and it says to check the electronic board, check for any signs of damage on the board and test for loose connections.
We got a Neff B1421B0GB/01, the thermostat lights up as the oven warms up and once the thermostat light shuts off indicating the oven is at temperature, the RCD/circuit breaker trips. Do you think its the element or thermostat which needs replacing? Thanks.
Hi sgtsixpack, It is most likely to be an element fault but we could not say conclusively. Even if you have access to a megger insulation tester you may not be able to measure a breakdown or leakage on the element until it is hot.
hi I have a zanussi Zce7551x that I'm having problems with. the bottom fan assistant oven has started cutting out after 10 mins of being on. but only the fan and element. the digital display and oven indicator light stays on. I've also noticed the oven indicator light does not go off now no matter what temperature the oven gets to unless u turn the nob to its off position. and im almost certain its heating up to more than 50°c (altho not heating like it should) in the 10 mins whilst on yet theres no click and absence of light like usual if u turn the nob down to 50. we've looked at the element and we can't see any obvious damage and we've checked the fan but it's not stiff to turn or too greasy and the nut is on fine. any ideas on what could be wrong. just before the fan and element stop I hear a very small click sound altho im not sure where from. any ideas?
It sounds like the if it is getting to hot the problem could be the thermostat and the click sounds like the over temperature thermostat cutting the heat off. Also check the cooling fan as shown in our video: th-cam.com/video/HAW73507hH0/w-d-xo.html
Hi, My wall oven has power on the clock and digital display is all on but it doesn’t heat up on bake just has a100• temp even if I try to set it to 350 it makes a click noice and switches back to 100. The broiler seems to be work ing. What can be the problem? Please help.
Hi car4dan, it sounds like the switch that controls the functions so start there, test the switch and contacts with a multimeter to determine if it has failed.
Hiya ,I have a diplomat electric double fan oven,but the fan has fallen off,there's obviously a part missing as the hole in the fan is much bigger than the spindle thingy it goes on,if I buy a replacement fan will it come with things to hold it on,sorry I'm not very technical lol Thanks Julie
Most fan motors are supplied with the fan and the nut to hold it onto the motor shaft. Find your model number and check our site as we should have an image of the part supplied when you order: www.espares.co.uk/search/pt1596/fans-and-motors
I have a electric wall oven 24in. by Kenmore, I had the oven for quite a long time I would have gotten rid of it but my wife love her oven, here is the problem every thing works on it except when you try to use bake, you set the temp. for baking and the mecconizum for bake clicks like it's suppose to then about a min. into the heating up process the oven turns off we keep setting the oven until we only hear the on click which sometimes take almost until it reaches the desire temp, I want to get a new electric oven but she want me to find out how much a new control panel would cost, that's her baby she picked it out, what should I do "help"
It is possible with the full model information we can get the correct part but this may depend on the age/availability of the appliance. If you wish us ti try please fill in the details on the following link: www.espares.co.uk/contact/sales
I have a Flavel Aspen 100 AP10FRS duel fuel cooker range, the grill works and the second over works, replaced the heating element but that wasn't the issue, no power to the main oven, main oven wont heat up and no fan
Hi, can you help me please. I have a leisure range 55 gas cooker. I used my oven yesterday and it was fine, went to use it last night and it ignites, blue flame is all where it should be, but just does not rise as should, it stays at same level. Everything else on cooker works perfectly. I've cleaned along part. Can you please advice, thanks
Hi Sylvia, There is a safety device called a thermocouple that sits in the 'pilot flame' to prevent the gas escaping if the flame goes out. These thermocouples do fail so it may need replacing.
Hi, I have as well double door belling oven, the oven always heat-up lower temperature than the temperature set, suppose if i set the knob at 180 it will end up at 150 or 160, its so difficult to get desired temperature, can you advise if it is thermostat or element or anything else.
Hi Muhammad Kashif. The fault could be related to a number of different causes, including an unset timer, thermostat, thermal cut out, terminal block or the heating element.
I have a Hotpoint BD62 and the top oven doesn't reach temperature. The light comes on and goes out as expected but the temperature is consistently too low. Is this likely to be a thermostat that needs replacing or some other part? Thanks.
If the light is going out then the thermostat believes it has reached the correct temperature. If the heat is escaping around the door due to a faulty seal or hinges the back may be correct but air coming in may effect the 'average temperature so check the door and seal first.
the electric was turned off when it was put back on the clock flashes and the oven does not work we have tried pushing the two buttons in at the same time still no luck it a chef oven eoc641w only has 4 buttons thanks
+Colin Walker We are sorry but cannot find information on your timer and it will stop the oven until it has been reset. You may have to hold one button for a few seconds to go into the 'set' mode before you can start, however by simply setting the minute minder if applicable may reset even if the clock is wrong.
What could be the cause of a grill element not working? The actual element itself registers ok on the multi meter but wont heat up. The oven setting works fine. Is there a fuse or something which could stop the grill elements alone from working? Thanks
Without model information we can only generalise. The grill element can also be used during 'convection' setting when using the oven so your problem may be the selector switch or the grill regulator control itself.
Handy video but if the heating element, clock etc is working from cold the fan does not spin... once I move it by hand and close the door it spins up I have had the oven cleaned professionally so it can't be dirty....and nothing is noisy or impeding it.
Hi Neil, if the bearing inside the fan has started to seize then it may not start until you give it a helping hand, you can try some lubrication but it might need replacing.
I have a Logik LBFANB12 when the oven is turned on the fan turns on but no light or heat comes on inside the oven. The "on" light on the oven control panel doesn't illuminate either. It seems like an electrical fault. Could this be a loose wire? Would there be seperate fuses for the oven function and the fan function? Or could the element need replacing? Thanks
Hi Nathan, the thermostat will break the circuit when up to temperature so may be faulty. Remember to check for an overheat cut out at the back and the timer is set to manual (if fitted).
hi i have a leisure cooker with a double oven I can lite the top oven and the 4 rings and they will work ok. but when i lite the bottom oven it will lite but there is no build up of gas so the flame gets bigger it just stays as if it was on a very low heat. please help thank.
Gas ovens have safety devices called thermocouples. These have an end that sits in the flame and when hot allow full gas to flow. if faulty or the flame goes out they only allow the minimum 'start up' gas flow.
Thanks so much Josh, i replaced an element and the cooker still refused to work. i was going mad trying to work out ...faulty fan , thermostat or even faulty new element. I saw this video and reset the clock....FANTASTIC.......
Hi Yashveer, it is most likely the grill element that is causing the electrics to trip but the only way to check is with a special meter called a megger.
My wife put one of those oven mats on the bottom so she wouldn’t have to clean the spilled food. It caused the oven to stop working, took out the mat it works perfectly again.
Hi my single oven is cutting the Power when i turn the grill on.i have test the grill element and looks good.about 036.can you please tell me what to teste next? thanks
The problem is still likely to be the element but this may not show using a standard multi meter as it needs a higher voltage to break down as shown in our other video: th-cam.com/video/XV6QlTwobLo/w-d-xo.html If you disconnect the wires to this element and ensure they are insulated then retry and the problem does not occur hen replace the element.
Hello, My oven stopped working after I turned off the power on my consumer unit as I was tiling my kitchen. When I turned it back on (I realized I didn't switch my cooker isolator switch off), my hob and grill worked fine. MY oven light and fan worked, only it wasn't heating up. Is this a simpler element issue? OR is it a circuit board issue? I'm quite savvy so want to fix it myself! What do you guys think? Thanks
Hello Sir, very nice video by the way, I have a question. Not knowing the terminologies or correct words to describe and identify which or what part is faulty; I am therefore asking would a "thermal fuse" be equal to or the same as the circular oven "element"? I ask this because I have a Leisure CMCF 96X Range cooker and after a four yearly general in house electrical test by professional electricians the digital clock display started flashing with a continuous bleeping alarm sound when switched back on. Following the manual to clear and rest the timer did not clear this fault it just continues bleeping, although all the igniters and two of the three ovens work the main oven doesn't. So I did a web search and found surprisingly this is a very common problem, thus I think, all eyes point towards a replacement digital clock display and said thermal fuse, or possibly one or two ideas from your video, however trying to find an image of it only comes up and shows as an element. Can you please help out and confirm this for me before buying it myself. Or if you know of the cure relating to my particular oven can you assist in the fix. Kind regards.
The problem is likely to be just the timer as it appears to be a simple clock and would not know if the oven was working or not. Therefore the fact it is bleeping suggests it is working intermittent.
Hi Donna, by following this video it should help you identify the problem. Once that is done we have other videos on replacing elements and thermostats to enable you to complete your repair. The likely problem will be the fan motor, replacement is shown in our video: th-cam.com/video/AYC3mVlqxmA/w-d-xo.html
I have a Bush AE6BFS built in electric fan Oven. Neither the main or gril element heat up. The indicator lights don't come on but both the circulating and coling fans work fine. I recently tired changing the thermostat but it made no difference. This model does not come with a clck or timer. any sugestions?
+Ian Forbes At 2:28 we talk about the thermal cut out at the back top of the oven that if blown will not allow power to the element. Also check for loose connections in the terminal block at the back.
Hello, my Diplomat fitted electric oven stopped working altogether (no heat from grill or oven and no fan). I replaced the main heating element, which was cracked through and had what looked like lots of carbon round one of the rings. I assumed this was the problem, however this has not fixed the oven and it still won't respond when I turn it on. I have checked the fuse box and can see that none of the breaker switches have flipped. Do you have any idea what the problem might be please?
Ross Burns If there are no signs of life at all (no lights or timer if fitted) suspect a supply problem. If it is a single oven it may well be 'plugged in' using a standard mains plug and the fuse may have gone..
Hi, I have a Hotpoint double oven BD62. I have recently replaced a failed element in the main oven and although the top oven is OK the main oven will not heat up. I have reset the clock following the element replacement. Does this seem like a control board failure or is there something else I should check? Thank you.
It is likely the over temperature cut out has failed. It is not clear if this is the one at the top of the fan tunnel or more likely the one on the back panel. If you have a meter one should show high resistance as it will close when warm to turn the cooling fan on. The other should read low resistance as it should only open when the oven has gone over temperature. There is no control board only the timer switches and thermostats on this oven.
Thanks for your advice. I will check the various components as you suggest. If I find the problem is a faulty cutout or thermostat are they available from you?
Hi ..I need your help!!!! how to replace of the convention motor in an electric stove AEG. I have problem to motor convention ! It is rumbles.. I m from Russia..sorry for my English..!
great video thanks! I have an issue with a lamona LAM4601 oven! The light and fan work but the oven gives no heat all, so I think the element might need replacing? If so, do you know if the whole oven needs to be removed from the unit and needs to be opened from the back? Also, if not the element, do you think issue could be something else? Tapping into your expertise here! :)
Hi James, thanks for the comments.If the appliance is dead and is plugged in using a fused plug as on small ovens it is certainly worth checking the fuse first and then confirming the power supply as mentioned at 1:00. However cookers and large ovens are generally hard wired and continental appliances do not even have fuses in the plug.
I ordered new element from you yesterday after the old one went bang... got it quickly so thought i would fit it today easily swapped it over and replaced the covers turned on oven and noticed the fan started up fine but no oven temp light left it running 5mins still no heat...but when i open the door the oven temp light come on and then goes off when i shut down again... im scratching my head on what it could be now any tip or ideas what to check next.
Some ovens have a door switch that stops the heating when the door is opened. The most likely cause of your problem (other than a wire falling off the element) is the thermal cut out as shown here: 2:28 Check with a meter and replace if required.
I had one question,my Oven had Electric current all over it,how to solve this,it function very well it just the current that scares everyone who touch it..my friend said it the grounding,but didn't understnd what he trying to say,i hope you can help me..
Hi TorQue, your friend is referring to an earth which is put into appliances for safety, when anything goes wrong it will blow the fuse or trip the electrics and remember when working on any appliance it should be disconnected.
I have a logik lbfanb12 and the two red lights on the selector and temp do t light and no heat. When I select fan it goes round. Could this be the element gone
+Ian Glen As the video tries to explain the indicators are showing power to the element and the fan is running confirming this so the problem is likely to be the element. Careful examination of the element may show a blister or damage but this can be confirmed using a meter for continuity.
Hi eSpares great video. My oven heats up fine no issues with the element i don't believe, however when it gets to a certain temperature the oven turns off and then restarts again as it is cooling off. Do you think this is a thermostat issue? the oven make and model number: Bush BUDFD60SS Dual Fuel Cooker- Stainless Steel. Thank you.
Check if the oven temperature light is cycling on and off when hot before the oven cuts out. If the oven temperature is excessive and the light stays on due to a faulty thermostat it will cut out with the safety cut out at the back.
Hi eSpares, sorry for late reply to this and thank you for your response. The oven is cycling on and off, however on most occasions the oven does not get chance to reach setting temperature (for example 200 C). The oven just switches off and then comes back on after five mins or so. Then other times it works fine with no issues. Very frustrating lol. Thanks again for the response.
OK Stacey, if the machine is 'cutting out' it is getting to hot in the case. Check the cooling fan (if fitted) inside is working correctly as this may cause the heat to build up in the case. For more information see another video: th-cam.com/video/clidmlmXazY/w-d-xo.html
I have a Hotpoint ew85 its driving me nuts lol. The fan in the main oven never stops its on all the time even without turning on the oven. I believe it triggered when the oven light blew. Any ideas it driving me crazy?
Hi Penelope, it sounds like one of the thermostats controlling the operation of the cooling fan has gone, test the thermostats with a multimeter to determine which one has failed.
Hello, I have a SMEG SA9066XS. The fan forced function on the oven stopped working. The top and bottom elements work with the fan forced function or in normal function. The 2 elements at the rear of the oven do not seem to heat up. I removed them and tested for continuity and they were fine, they don't look damaged at all. The fans behind the elements are working fine as well. We did replace one last year. Recently the lights stopped working too. Do you have any suggestions? Thanks
@@eSpares Hi, the bottom and top element heat up when the fans aren't engaged (at the same time) and the top and bottom element work individually on fan forced function. If the thermostat was broken would they both not work the same as the fan forced oven function? When you say check the "switches" which switches in particular are you referring to? I have seen different information about the thermostat - some claim you can't check the thermostat with a multi meter and others that say you can - can you check it? Thanks
could this be related to the bulb in my oven blowing as well, my wife thinks it happened during a storm. Is there an internal fuse that may be the issue? if so, where would I find it please.
Good instruction easy to follow. After I cleaned my Whirlpool oven using a spray , it stopped heating. The thermostat light does work. What could be the problem. The thermostat or the element? Thanks
At 4:34 we explain how if the indicator lamp is working the fault is likely to be an element failure, examine this for damage or use a meter to confirm if it has failed.
Hi we have a nordmende oven which won’t heat on with the fan element or the grill element. Also the bulb doesn’t come on. The bulb doesn’t appear to have gone and the fan does work so there is power. Any ideas?
Hi, If you have a clock and it is not set correctly or on 'Automatic' all the power to the oven will be off. If the oven does not have a clock search our advice centre for 'oven no heat' here: www.espares.co.uk/advice
Hi Steve, if the top elements are getting to the correct temperature it may indicate a problem, check the element for any signs of damage or any cracks that would indicate they are failing if the oven smokes it is usually a build-up of grease and needs cleaning.
i have a problem with my oven fan its making some god awful noises intermittent and i had the motor replaced about 6 months ago all was fine until recently. the noise sounds like dragging metal objects across a floor im sure its the fan because the speed of it keeps changing. is it fixable or will i need another new motor?
Thanks for your reply just checked it the blade isnt loose or bent and the element is still in place as it should be the sound definitely seems to be coming from out the back of the oven and not in the oven itself where you put your food. the only thing i no notice is the shaft for the motor goes back and forth maybe 10mm im not sure if its supposed to do that or not
i know this is an old post but could you help me.. my oven works fine except the main oven doesnt ignite. i can light it with a lighter but the ignition still clicks like crazy.. ignition works fine with everything else.. is it stuck or burnt out in the main oven part?
Your problem is likely to be one of two things. Either the electrode producing the spark is contaminated from a food splash (if you cannot clean it then replace the electrode). Or if there has been a food splash on the burner causing a blockage near the electrode then the gas may not be giving a 'flame' at the electrode (again check and clean the burner if required).
Hi Josh , I have a convection oven table top model , after watching your useful video , I want fix a turbo fan to convert it into a air fryer , through your profession is it possible to convert , your advice please ... tks sammy
Convection ovens pass heat into them through the base panel and also from the grill element. We have seen a brand that just adds a fan inside the cavity to circulate the air better and average out the temperature. Fan ovens have there element around the fan and as a result will heat quicker and are less likely to radiate heat overcooking the top and bottom of the food. So in short you may be able to install a fan but it is not likely to be as good as a genuine fan oven.
Hi David, is it overheating? as that would cause it to activate the overheat thermostat, check the thermostat is cycling and the light goes out before testing the thermostats
Hi, I have a Hotpoint EW74, and in the main oven the thermostat light comes on, fan does not work and oven does not heat up. I thought at first it was the element, but then i doubted it as i wasn't sure if this would affect the fan also? Thanks in advance. Edit: I've probed the element terminals on the back, and have resistance well within the limits you've mentioned in this vid.
Hi Cheryl, the element and fan are probably not working due to the cut out as shown at 2:30. Check if this has failed with your meter and if faulty check the oven temperature regulates when replaced as the main thermostat may also have failed causing it to overheat.
Thanks for the quick reply. (Quick disclaimer, i'm not Cheryl, somehow she's logged into TH-cam on my laptop. My name is Stu) So, assuming i have the correct component (it's hard to see in that vid), it is showing open circuit. On your website there are two items that look very similar, ES663793 and ES491201. One is a thermal cut-out, and one is a cut-in. I wanted to double check with you before i order the part. (my oven is an EW74P) Cheers.
Hi Stu, the cut in stat connects the fan when warm, the cut out stat Stock Number: ES491201 should be the one that has failed, check with your meter and replace if it shows open circuit.
Hi Steven, we have no experience working on your make of oven but can give some advice. Some multi function ovens like Neff will turn on the fan as soon as the function Knob is turned from the 'off' position even if the thermostat is on minimum and the oven is not heating so check this. If all the controls are in the off position but the fan still runs look for a 'thermal cut in' usually on the duct from the cooling fan. This is a switch that should only close when warm to power the fan.
I have a Maytag stove, gas/electric combo and it runs fine most of the time. Whenever I do any long term cooking(Over an hour) the temperature starts to fall off. I can reset the temperature and sometimes it comes back up but sometimes it doesn't Any ideas what this could be?
+Andy Tysdal Have you used a thermometer to confirm the temperature is dropping?. When a gas oven reaches temperature the flame is turned down until more heat is required (if you opened the oven for a minute for example).
If you are using the oven in the same manner as you have used it before and it is now burning food it suggests your thermostat may be faulty. Select a low cook temperature and watch if the oven temperature indicator starts to cut off and on after a few minutes, this should happen once the temperature selected is reached. If the heat continues rising above what has been selected it would suggest the thermostat has stuck and may need replacing as shown in a similar video: th-cam.com/video/RcpfZMe30s0/w-d-xo.html
eSpares thanks for helping. Usually bake on 240° C, turned it on 100°C and is warm like 100°C. (After 40mins working). The other thing is more than 3 weeks now the light's gone (mentioned just in case if that makes any sense).
The internal light will not effect the cooking temperature, and it sounds like the thermostat is 'regulating correctly. The other problem that can effect the oven cooking evenly is if hot air is escaping from a damaged seal or the door not closing correctly so check these next.
My Whirlpool AKZ 497 starts pre-heat sequence then displays cooking which should indicate it is up to the required temperature. Recently results have been poor so have checked temperature manually with gauge. This is indicating temperature 30-35c below the temperature setting. It eventually after over an hour gets close. Is the faulty component likely to be the sensor? Thanks in advance.
+eSpares Thanks for your prompt response. I have ordered from you a new thermal sensor for delivery this afternoon, unfortunately the bottom element doesn't appear to be ex-stock and a delivery time of 2 weeks is quoted. Out of interest these are the readings of all the elements: Bottom 41.6 ohms, Right grill 62.5 ohms, Left grill 37.9 ohms & fan 28.4 ohms. On further testing using fan setting temperature indicator is almost spot on.
+Alan Shaw All the element readings seem fine. As the readings are correct on fan settings it suggests a heating issue. Start for 10 seconds or so and stop then carefully (don't burn yourself) feel for heat in the grill element and through the base. If no heat from the base slowly extend the time till you are sure there is no heat from the base.If the connectors to the module are OK the problem may be the module.
+eSpares +Alan Shaw Thermal sensor has now been replaced. No change in performance. As suggested by you I turned on oven set to conventional at 200c. Top naked element(s) heated up in a few seconds when tested by touching with damp cloth wrapped around my finger. The bottom enclosed element took about 1 minute to warm base of oven and was tested by touching with fingers before it became too hot to touch after a few minutes. Display changed from pre-heat to cooking at approximately 140c some 60c under the setting of 200c. It took about 30-35 minutes to get up to correct temperature. I have since learned that a new bottom element is not ex-stock and an expedited delivery of 14-28 days has been given by your sales people. This is not acceptable so have purchased a new oven. Thanks for your advice.
Josh, not all Heroes wear capes ! You saved our oven
Thanks Adam.😊
I can see the element red hot and the fan is working when switched on but food is burning quickly.Is it the thermostat? The red temperature light doesn’t go out on the front of the cooker.Any ideas?
My belling oven's grill is faulty.
It will glow red once turned on but after a while it just shuts off and goes back cool. Even with the temp still up.
Do I replace the thermostat and capillary rod.
The small thermostat part on the back.
Or something else.
Thanks.
Hi RSjampot, is the thermostat light cycling on & off? if not it suggests the thermostat is not working but if ok test the element with a multimeter.
@@eSpares yes..the light comes on and turns off with an audible click.
The oven, that I'm guessing runs on the same thermostat does not switch off like the element does.
My element has "sagged" towards the unsupported part which leads me to suggest it may need replacing.
I will remove it and inspect it carefully for cracks or breaks.(the oven element had gone a year or so ago so I know what on looking out for)
How would I test with a multimeter to check everything is in working order on the element?
Thanks. J
Hi we suspect our fault with our select 600 by Diplomat is the cooling fan.The oven heats up and then goes dead.Light goes off.Nothing.After a short time the oven will work again but will continue to die after a short while.What do you think Please?
Hi Kev, this does sound like the overheat safety cut out is operating. This can be caused by a stuck main thermostat causing excessive oven temperature, poor airflow around the cabinet or more likely due to the cooling fan not running.
Hi, I have a eka oven at work and it says that the fat collection valve needs to be fixed, do you know anything about this ?
Hi Kottur b5, eka is manly a commercial brand that we don't have any dealings with so you would need to go to the manufacturer.
My logik electric fan oven is tripping the breaker after it has been on for 30 seconds. This has occurred since having the element replaced, which is working until it trips. The rest of the cover works fine. Any ideas ? Thanks
Hi Chris, you would need to trace the circuit to find out what was going down to earth causing the oven to trip, we have had new elements that are damp which can cause it to trip so dont rule that out. does everything work ok until you turn the temperature on?
Hi, I've got a Logik LBFANW10. When I turn the grill on the circuit breaker in the fuse box trips. Would this be a problem with the grill element?
Hi Arnie, yes it is likely to be the element, check for any signs of damage that would indicate it has gone.
hoover error code 02. nobody brings up error codes, the manuals are useless, they cant even explain buttons to set clock. press centre buttom then release all buttons on a touch button oven. my oven stopped heating up with error code 02. i tried steam cleaning and the element did heat up to create steam. if you call hoover, they want to send the engineer out and i rather buy a new oven, NOT hoover again. any thoughts?
thanks
i cant turn my oven on because the clock pannel doesnt light up to set the timer but my hob and grill works i have just bought a new element and replaced it and it was working fine and then the clock panel went of can you help me please
+Bev Jones Your oven will not work if the timer has failed so replace that to start with.
I have a logik LBFANB12 if I cook at 100-150 all ok if I go above after about half an hour it blows the circuit and won't come back on till cooled down, any ideas
+kevan day The problem is likely to be the element but it is possible it could be the main oven element or the grill. It is most likely the main oven element so there is where we would start.
Ok cheers I'll check it out, it's only been used 30/40 times at the most so that's a bummer
Thanks... 30secs in and my oven worked again! Set clock! Bingo.... Thanks.
Hi Gavin Dwyer, thanks for letting us know, glad the video helped.
Oven turns on timer works but the elements won’t get hot need help.
I have a Kenmore Electric Range that has an oven problem. When I turn the oven on bake the bake element does not come on but the broil element comes on at a very hot temperature. Would someone offer a suggestion as to what is wrong with my oven?
Check the Bake element has not failed. Then check the selector switch carefully as you may find some switch contacts that have welded stuck.
Hi my lofra fan oven is having issues, the grill is not working. It seems like only the outer rod is heating up.
Examine it closely looking for cracks or blisters as it is likely the element has failed. You can check with a meter if there is a resistance through both parts of the element and if required replacement will be similar to this video:
th-cam.com/video/j3GRS0nLHW0/w-d-xo.html
Please can you help me with some advice? I have a "Caple C2216" single electric fan oven. The oven was working fine one day but the next it appears to have no power? The clock is working: set correctly and not not in timer mode. When I turn the "Control" knob nothing works, not even the internal light or fan? I've checked all plug fuses and there is power to the oven. So my question is: What has happened since last using the oven that's now preventing it from working? Hope you can help? Thanks!
Hi Michael, we would suggest using a multimeter to trace the circuit from the terminal block to the switch if it is a connection issue you need to establish what components are OK first and if you are getting power to the controls.
Thank you for such an informative video, i've LAM3204 Model, fan/light is working but heating element stopped working. And same knob don't respond, needs to switch On/Off from Mains.
Hi Zeeshan,check the oven element with a multimeter, check the control knob by pulling it off to check if it is broke. we have a video on replacing the element th-cam.com/video/3-bwySCMG28/w-d-xo.html
My oven keeps turing off and on when preheating , what could be the problem?? Thank you so much for the work u put in .
Love all espares presentation - very professional, great tips and advice and has saved me a fortune in advice and parts not to mention I have learned to repair rather than replace everything in my kitchen doing my part for saving the environment - nice one guys
Great comments Gary, keep up the good work. :-)
Its the internet in general. Imagine 20 odd years ago, we wouldnt of have had a clue. Ive fixed cookers, washing machines, tumble dryers, do all the work on my car, brought myself a mig welder and learnt to weld, fix other gadgets from TV's to mobile phones etc. Hey, if somethings broke, google it and there is near enough a "how to" on anything. And its all thanks to the world wide web and videos like this. Its great. Big thanks to guys like these sharing their knowledge. :D
Thanks for the comments Bob. With such a lot of information out there that sometimes it is difficult to find the good from the bad. We can all help by remembering to 'Like' videos and information that is useful. That way Google and You Tube will be able to filter the good stuff to the top making searching easier. :-)
Ihave un problème with my oven can I help me
Garry Gemmell ok
i have a beko oif22301 wall cooker thers power going to it but it wont turn on the oven part or grill any help please
you set the timer Kieran as described at 0:23 ?.
Kenmore electric built-in oven model 790.48783901. It won't turn off. I shut off the breaker, and when I turned the breaker to it back on, the oven starts up again. "Stop" button beeps when pressed but doesn't stop it from working. Any suggestions? Thanks.
Hi J Lester, there are a few possible reasons and you will need a multimeter to test them, start by checking the elements as if they have shorted out. Test the thermostats and it,s possible it could be a relay or the control board, good luck.
Thanks for the tip. Will check them this weekend. Have never done this before so I appreciate your advice.
dear i have built in oven when it reach max heat its turn off not on until 40 to 45 minut can u please tell me what can we do
This informative video saved me from physically assaulting my wife, after changing the oven element on a neff oven ,, did everything like for like but oven wouldn’t come on,, then the ball ache off the mrs started because it wouldn’t start , after numerous death threats and a threat of an unlimited time of fanny blankers off the wife ,, i looked up this vid ,, turns out i only needed to set the clock , boom leccy on , game on ,, man of match ,, i fix ovens now !!! , put a pie in then smashed the mrs ,, to the victor the spoils
Hi Sean, thank you for your comment and glad the video helped get you back into your wife's good books.
My Beko built in Oven's cooling fan works but never turns off after use & I have to eventually turn off the mains after each use...
Any Ideas?
All I get from searches online is"It's suposed to do that" Yes I agree for 20 mins or so but not indefinitely!
Hi, our cannon hotpoint main oven don't heat up, top oven works perfectly. What could be the issue?
Hi Afy, check the oven element as that is the most likely.
Bought a new Samsung oven 3 months ago now push buttons will not light up no power there but my ignites work for burners help anyone ?
Hi Bruce, your oven is under guarantee so ring Samsung and they will come out and fix it for free ☺
My 3 year old AEG oven throws a F4 code (temp sensor) - fan works - oven doesn't - replaced temp sensor and didn't make any difference....any suggestions would be appreciated.
My DeDietrich FX4827 oven has symptoms that Josh says need clock reset (grill works but oven does not heat) but display shows IE 1 and clock controls don't do anything. Cant find any definition of error. Is it control board or door lock or thermostat? Any idea?
Hi Steve, it sounds like the clock is not functioning correctly and would need to be replaced.
@@eSpares Thanks - I thought that might be the case but no part on your site.
Belling double oven main oven not working, have reset clock, fitted new heating element still not working but top oven works ok
Hi Julie, does the fan in the oven come on? when you select the temperature does the indicator light come on.
I have hei8054u I have a problem the oven does not turn on and the control board beeps but it is off, someone can help me thanks
Hi Sal, start by checking the oven control switch first before looking at the connections to the board but as you can't test the board you need to go through the circuit until you have isolated the failed component.
I have an Estate Convection oven - ceramic top - that began pooping out yesterday. The burners work fine but the oven was dead and the digital display was blinking in an out in an erratic manor, like there was a bad electrical connection. Every so often it would begin beeping and flashing a code F1E1 which I understand means to replace the control board. I pulled the stove out, got my tools to pull the cover where the power pigtail connects so I could verify the correct voltage was making it to the stove. Before pulling the access panel I figured I should check the breaker, which was not tripped. I flogged the breaker on and off 4 or 5 times and went to the stove and pushed a couple of buttons and all is working now. Over sets and begins heating now, convection fan works etc. I will post again if it begins messing up again.
Hi Jeff, before you think the problem is cured check the cable connections both and the wall connection and as it is connected to your appliance, It is not to unusual for these to start burning and making a poor connection if they were not fully tightened on installation. If you catch the problem now you may just need to re tighten the connectors, leave it a bit and the burning may damage them and require replacement.
Hello, I wonder if you could help me. I have a Diplomat oven and the grill isn't heating up. The oven works fine but when it is on either of the two grill settings it doesn't get hot (all lights are on). I replaced the oven light last night as it had gone and when I came to use the grill this morning it blew the fuse box and the grill is now not working. Would this be the grill element? Many thanks!
Hi, I have a SMEG oven, the thermostat light is on but the Fan is not working and the element does not heat up either. Could it be the element or power to the fan? The element looks fine.
Hi, we have a Stoves 900G, model:059040305 which works as it should, except when the fan goes off (about 10min after switching off the grill or oven), it trips the RCD. What could it be? Thanks in advance
Hi, I have a Zanussi cooker model ZKC5020W1. Last night while using the oven it lost all power. The oven stopped heating up, the fan stopped working and the light went out. The hob works fine. The element was checked and all looks well, no hairline cracks or blow outs. Any ideas what the problem could be.
There is a thermal cut out at the back like shown at 2:25
www.espares.co.uk/product/es1554759
If this has tripped or the fuse to the appliance it will cause this problem.
Hi Josh. This is really helpful and I love that you reply to so many comments! My problem is that the bulbs inside the oven don't work, and neither does the 'heating up' light. Is there a fuse on the oven that might have shorted? I'm going to look at the back of the oven as you suggest, but I think anything after that is too dangerous for me to attempt. Additionally, the fan and lights on the extractor fan don't work... Thanks!
Hi KIm, what model do you have? the bulb and the heating light are 2 different things, have you tried changing the bulb and does the oven heat up?
Hi, I have an AEG KM4400001M oven. When I'm done cooking the oven starts to cool down. This works for some time but then after it's almost completely cooled it start to mess with the system. It will stop the cooling down proces and start cooling down proces really quick which result in the oven turning on and off. If I unplug the oven and plug it in the next time I need it then it will work perfectly until it starts to cool down again. I'm not sure what the problem can be. I was thinking about the thermostat, but during the heat in the oven is consistent. I also do not think the cooling fan could be the problem because it cools down the oven for a couple minutes before the problem occurs. Can you help me with this problem, thanks. Ruud
Hi Ruud, check to make sure the cooling fan is coming on and working correctly if it's not cooling the control panel it could affect the PCB and cause issues, also make sure all the connections are not loose on the PCB.
Hi, we have a Stoves 900G, model:059040305 which works as it should, except when the fan goes off (about 10min after switching off the grill or oven), it trips the RCD. What could it be? Thanks in advance
Hi Lennonesque, if you have an insulation breakdown or a short it will cause the trip to go out, test the fan as you will need to find out which component is failing to cause it to trip.
Hi, I am just about to order part to replace as I think my thermostat is the issue. Wonder if you could confirm /advise please
2 days ago over only worked below 150degrees, grill and hob fine. Yesterday only grill and hob work, Today only the hobs work. I assume it is a faulty thermostat and not clock/an element for example but is there any way to be sure? Thank You
At 4:34 we talk about the oven temperature indicator. This should light when the elements are being heated and if the thermostat was faulty the light would not come on. However if the grill is not controlled by this (some models) it suggests a common problem between grill and oven so check the terminal block as the connections may be loose and burning. For information on the terminal block see our video:
th-cam.com/video/YvQEDG-hNz4/w-d-xo.html
fault code hasF03 on my hotpoint si48454cix just decided it desnt want to switch on,,just displays the code , charming! any knowledge as to what it may be , many thanks
We believe this error may indicate a faulty oven temperature sensor:
www.espares.co.uk/product/es1420399/probe
I have a zanussi oven zop37902xk, the oven came on actually on its own even when the dial was on 0 and it's showing error code po22, c325 and c can you give me an idea of what this may be, only had it 4 years and it's hardly used, I don't want to pay for an engineer and part replacement if it's cheaper to buy a new one, many thanks
Hi Rach, error code c325 is listed at flash memory failure and it says to check the electronic board, check for any signs of damage on the board and test for loose connections.
We got a Neff B1421B0GB/01, the thermostat lights up as the oven warms up and once the thermostat light shuts off indicating the oven is at temperature, the RCD/circuit breaker trips. Do you think its the element or thermostat which needs replacing? Thanks.
Hi sgtsixpack, It is most likely to be an element fault but we could not say conclusively.
Even if you have access to a megger insulation tester you may not be able to measure a breakdown or leakage on the element until it is hot.
hi I have a zanussi Zce7551x that I'm having problems with. the bottom fan assistant oven has started cutting out after 10 mins of being on. but only the fan and element. the digital display and oven indicator light stays on. I've also noticed the oven indicator light does not go off now no matter what temperature the oven gets to unless u turn the nob to its off position. and im almost certain its heating up to more than 50°c (altho not heating like it should) in the 10 mins whilst on yet theres no click and absence of light like usual if u turn the nob down to 50. we've looked at the element and we can't see any obvious damage and we've checked the fan but it's not stiff to turn or too greasy and the nut is on fine. any ideas on what could be wrong.
just before the fan and element stop I hear a very small click sound altho im not sure where from. any ideas?
It sounds like the if it is getting to hot the problem could be the thermostat and the click sounds like the over temperature thermostat cutting the heat off. Also check the cooling fan as shown in our video:
th-cam.com/video/HAW73507hH0/w-d-xo.html
Hi, My wall oven has power on the clock and digital display is all on but it doesn’t heat up on bake just has a100• temp even if I try to set it to 350 it makes a click noice and switches back to 100. The broiler seems to be work ing. What can be the problem? Please help.
Hi car4dan, it sounds like the switch that controls the functions so start there, test the switch and contacts with a multimeter to determine if it has failed.
Hiya ,I have a diplomat electric double fan oven,but the fan has fallen off,there's obviously a part missing as the hole in the fan is much bigger than the spindle thingy it goes on,if I buy a replacement fan will it come with things to hold it on,sorry I'm not very technical lol Thanks Julie
Most fan motors are supplied with the fan and the nut to hold it onto the motor shaft. Find your model number and check our site as we should have an image of the part supplied when you order:
www.espares.co.uk/search/pt1596/fans-and-motors
I have a electric wall oven 24in. by Kenmore, I had the oven for quite a long time I would have gotten rid of it but my wife love her oven, here is the problem every thing works on it except when you try to use bake, you set the temp. for baking and the mecconizum for bake clicks like it's suppose to then about a min. into the heating up process the oven turns off we keep setting the oven until we only hear the on click which sometimes take almost until it reaches the desire temp, I want to get a new electric oven but she want me to find out how much a new control panel would cost, that's her baby she picked it out, what should I do "help"
It is possible with the full model information we can get the correct part but this may depend on the age/availability of the appliance. If you wish us ti try please fill in the details on the following link:
www.espares.co.uk/contact/sales
I have a Flavel Aspen 100 AP10FRS duel fuel cooker range, the grill works and the second over works, replaced the heating element but that wasn't the issue, no power to the main oven, main oven wont heat up and no fan
Hi, can you help me please. I have a leisure range 55 gas cooker. I used my oven yesterday and it was fine, went to use it last night and it ignites, blue flame is all where it should be, but just does not rise as should, it stays at same level. Everything else on cooker works perfectly. I've cleaned along part. Can you please advice, thanks
Hi Sylvia, There is a safety device called a thermocouple that sits in the 'pilot flame' to prevent the gas escaping if the flame goes out. These thermocouples do fail so it may need replacing.
Hi, I have as well double door belling oven, the oven always heat-up lower temperature than the temperature set, suppose if i set the knob at 180 it will end up at 150 or 160, its so difficult to get desired temperature, can you advise if it is thermostat or element or anything else.
Hi Muhammad Kashif. The fault could be related to a number of different causes, including an unset timer, thermostat, thermal cut out, terminal block or the heating element.
My oven is continually on not take cut off whats problem
Hi arun, if you turn the selector switch to the off position and it doesn't turn off then check the switch first.
I have a Hotpoint BD62 and the top oven doesn't reach temperature. The light comes on and goes out as expected but the temperature is consistently too low. Is this likely to be a thermostat that needs replacing or some other part? Thanks.
If the light is going out then the thermostat believes it has reached the correct temperature. If the heat is escaping around the door due to a faulty seal or hinges the back may be correct but air coming in may effect the 'average temperature so check the door and seal first.
can we direct the thermostat ???
the electric was turned off when it was put back on the clock flashes and the oven does not work we have tried pushing the two buttons in at the same time still no luck it a chef oven eoc641w only has 4 buttons thanks
+Colin Walker We are sorry but cannot find information on your timer and it will stop the oven until it has been reset. You may have to hold one button for a few seconds to go into the 'set' mode before you can start, however by simply setting the minute minder if applicable may reset even if the clock is wrong.
What could be the cause of a grill element not working? The actual element itself registers ok on the multi meter but wont heat up. The oven setting works fine. Is there a fuse or something which could stop the grill elements alone from working?
Thanks
Without model information we can only generalise. The grill element can also be used during 'convection' setting when using the oven so your problem may be the selector switch or the grill regulator control itself.
Handy video but if the heating element, clock etc is working from cold the fan does not spin... once I move it by hand and close the door it spins up I have had the oven cleaned professionally so it can't be dirty....and nothing is noisy or impeding it.
Hi Neil, if the bearing inside the fan has started to seize then it may not start until you give it a helping hand, you can try some lubrication but it might need replacing.
@@eSpares the fan unit ?
Hi Neil, yes the fan unit
@@eSpares thanks I will take it off and try some teflon multi spray lube see if that works before buying a new motor thanks for replying
I have a Logik LBFANB12 when the oven is turned on the fan turns on but no light or heat comes on inside the oven. The "on" light on the oven control panel doesn't illuminate either. It seems like an electrical fault. Could this be a loose wire? Would there be seperate fuses for the oven function and the fan function? Or could the element need replacing? Thanks
Hi Nathan, the thermostat will break the circuit when up to temperature so may be faulty. Remember to check for an overheat cut out at the back and the timer is set to manual (if fitted).
hi i have a leisure cooker with a double oven I can lite the top oven and the 4 rings and they will work ok. but when i lite the bottom oven it will lite but there is no build up of gas so the flame gets bigger it just stays as if it was on a very low heat. please help thank.
Gas ovens have safety devices called thermocouples. These have an end that sits in the flame and when hot allow full gas to flow. if faulty or the flame goes out they only allow the minimum 'start up' gas flow.
Thanks so much Josh, i replaced an element and the cooker still refused to work. i was going mad trying to work out ...faulty fan , thermostat or even faulty new element. I saw this video and reset the clock....FANTASTIC.......
+Paul Holmes We have all been caught out by simple things at some time. Glad all is sorted now. :-)
I have a zanussi 365x model and I have problem when I switch on the grill after 2 minutes it make my electricity trip .
Hi Yashveer, it is most likely the grill element that is causing the electrics to trip but the only way to check is with a special meter called a megger.
Mine shorts out everything when its turned on, this happened after i cleaned it with soap and water, what could have happened and is it repairable?
Hi wonder if you can help please. Oven light doesn’t come on when turning on temperature and the back fan also doesn’t spin when turn mode on.
Rhodri
My wife put one of those oven mats on the bottom so she wouldn’t have to clean the spilled food. It caused the oven to stop working, took out the mat it works perfectly again.
Hi SuperChief5, thank you for your post and we have seen those mats but never heard of any issues.
Hi my single oven is cutting the Power when i turn the grill on.i have test the grill element and looks good.about 036.can you please tell me what to teste next?
thanks
The problem is still likely to be the element but this may not show using a standard multi meter as it needs a higher voltage to break down as shown in our other video: th-cam.com/video/XV6QlTwobLo/w-d-xo.html
If you disconnect the wires to this element and ensure they are insulated then retry and the problem does not occur hen replace the element.
Hello,
My oven stopped working after I turned off the power on my consumer unit as I was tiling my kitchen.
When I turned it back on (I realized I didn't switch my cooker isolator switch off), my hob and grill worked fine.
MY oven light and fan worked, only it wasn't heating up.
Is this a simpler element issue?
OR is it a circuit board issue?
I'm quite savvy so want to fix it myself!
What do you guys think?
Thanks
Hi Tarzan 1, it is likely the element has failed, start by testing it with a multimeter.
eSpares thanks guys!
Hello Sir, very nice video by the way, I have a question. Not knowing the terminologies
or correct words to describe and identify which or what part is faulty; I am
therefore asking would a "thermal fuse" be equal to or the same as
the circular oven "element"?
I ask this because I have a Leisure CMCF 96X Range cooker and after a four yearly general in
house electrical test by professional electricians the digital clock display
started flashing with a continuous bleeping alarm sound when switched back on.
Following the manual to clear and rest the timer did not clear this fault it just continues bleeping,
although all the igniters and two of the three ovens work the main oven doesn't.
So I did a web search and found surprisingly this is a very common problem, thus I think, all eyes
point towards a replacement digital clock display and said thermal fuse, or possibly one or two ideas
from your video, however trying to find an image of it only comes up and shows as an element.
Can you please help out and confirm this for me before buying it myself.
Or if you know of the cure relating to my particular oven can you assist in the fix.
Kind regards.
The problem is likely to be just the timer as it appears to be a simple clock and would not know if the oven was working or not. Therefore the fact it is bleeping suggests it is working intermittent.
Whirlpool 3 year old convection oven...fan not working! Please help to find issue? Thanks
Hi Donna, by following this video it should help you identify the problem. Once that is done we have other videos on replacing elements and thermostats to enable you to complete your repair. The likely problem will be the fan motor, replacement is shown in our video: th-cam.com/video/AYC3mVlqxmA/w-d-xo.html
Thanks for the life saving advices ,
Hi, thanks so much for your comment, we are glad you appreciate our videos. Whenever you have issues with an appliance, eSpares are here to help!
i have a LAMONA oven it has power .but as soon as i try and put oven or grill on it blows the main electric please help
i have a bekodvc663 cooker.the grill does not work nor does the indicator light for the grill.how do i identify the fault
I have a Bush AE6BFS built in electric fan Oven. Neither the main or gril element heat up. The indicator lights don't come on but both the circulating and coling fans work fine. I recently tired changing the thermostat but it made no difference. This model does not come with a clck or timer. any sugestions?
+Ian Forbes At 2:28 we talk about the thermal cut out at the back top of the oven that if blown will not allow power to the element. Also check for loose connections in the terminal block at the back.
+eSpares Thanks. I'll look into it.
Hello, my Diplomat fitted electric oven stopped working altogether (no heat from grill or oven and no fan). I replaced the main heating element, which was cracked through and had what looked like lots of carbon round one of the rings. I assumed this was the problem, however this has not fixed the oven and it still won't respond when I turn it on. I have checked the fuse box and can see that none of the breaker switches have flipped. Do you have any idea what the problem might be please?
Ross Burns If there are no signs of life at all (no lights or timer if fitted) suspect a supply problem. If it is a single oven it may well be 'plugged in' using a standard mains plug and the fuse may have gone..
eSpares thank you. I'll check the fuse in the plug tonight
Hi, I have a Hotpoint double oven BD62. I have recently replaced a failed element in the main oven and although the top oven is OK the main oven will not heat up. I have reset the clock following the element replacement. Does this seem like a control board failure or is there something else I should check? Thank you.
It is likely the over temperature cut out has failed. It is not clear if this is the one at the top of the fan tunnel or more likely the one on the back panel. If you have a meter one should show high resistance as it will close when warm to turn the cooling fan on. The other should read low resistance as it should only open when the oven has gone over temperature. There is no control board only the timer switches and thermostats on this oven.
Thanks for your advice. I will check the various components as you suggest. If I find the problem is a faulty cutout or thermostat are they available from you?
The cut out is available here:
www.espares.co.uk/product/es664167
We should be able to supply parts for most appliances.
I have electric and gas oven but electric oven is not working at all
I have a delonghi cooker with multifunction oven which is only working on on setting. Any ideas why this is please
Hi Ann, the cooker will usually use a selector switch, you will need to test it to determine if it has failed.
high ive got a cookwork double oven cooker the small oven works but the big oven trps the electric what could this be, thank you
Hi ..I need your help!!!! how to replace
of the convention motor in an electric stove AEG.
I have problem to motor convention ! It is rumbles..
I m from Russia..sorry for my English..!
Hi V Iniy, if it's the fan motor inside the oven we have a video to help th-cam.com/video/AYC3mVlqxmA/w-d-xo.html&t let us know how you get on.
great video thanks!
I have an issue with a lamona LAM4601 oven! The light and fan work but the oven gives no heat all, so I think the element might need replacing? If so, do you know if the whole oven needs to be removed from the unit and needs to be opened from the back?
Also, if not the element, do you think issue could be something else?
Tapping into your expertise here! :)
This video should help identify a suspect element by following this part 4:34.
If there is power at the wall switch, first test or replace the fuse in the appliance plug!!! Otherwise great video and follow up commenst.
Hi James, thanks for the comments.If the appliance is dead and is plugged in using a fused plug as on small ovens it is certainly worth checking the fuse first and then confirming the power supply as mentioned at 1:00. However cookers and large ovens are generally hard wired and continental appliances do not even have fuses in the plug.
I ordered new element from you yesterday after the old one went bang... got it quickly so thought i would fit it today easily swapped it over and replaced the covers turned on oven and noticed the fan started up fine but no oven temp light left it running 5mins still no heat...but when i open the door the oven temp light come on and then goes off when i shut down again... im scratching my head on what it could be now any tip or ideas what to check next.
Some ovens have a door switch that stops the heating when the door is opened. The most likely cause of your problem (other than a wire falling off the element) is the thermal cut out as shown here: 2:28 Check with a meter and replace if required.
I had one question,my Oven had Electric current all over it,how to solve this,it function very well it just the current that scares everyone who touch it..my friend said it the grounding,but didn't understnd what he trying to say,i hope you can help me..
Hi TorQue, your friend is referring to an earth which is put into appliances for safety, when anything goes wrong it will blow the fuse or trip the electrics and remember when working on any appliance it should be disconnected.
Hi TorQue, start by checking the oven element as that is normally what causes the oven to trip before suspecting anything else.
I have a logik lbfanb12 and the two red lights on the selector and temp do t light and no heat. When I select fan it goes round. Could this be the element gone
+Ian Glen As the video tries to explain the indicators are showing power to the element and the fan is running confirming this so the problem is likely to be the element. Careful examination of the element may show a blister or damage but this can be confirmed using a meter for continuity.
Hi eSpares great video. My oven heats up fine no issues with the element i don't believe, however when it gets to a certain temperature the oven turns off and then restarts again as it is cooling off. Do you think this is a thermostat issue? the oven make and model number: Bush BUDFD60SS Dual Fuel Cooker- Stainless Steel. Thank you.
Check if the oven temperature light is cycling on and off when hot before the oven cuts out. If the oven temperature is excessive and the light stays on due to a faulty thermostat it will cut out with the safety cut out at the back.
Hi eSpares, sorry for late reply to this and thank you for your response.
The oven is cycling on and off, however on most occasions the oven does not get chance to reach setting temperature (for example 200 C). The oven just switches off and then comes back on after five mins or so. Then other times it works fine with no issues. Very frustrating lol. Thanks again for the response.
OK Stacey, if the machine is 'cutting out' it is getting to hot in the case. Check the cooling fan (if fitted) inside is working correctly as this may cause the heat to build up in the case. For more information see another video:
th-cam.com/video/clidmlmXazY/w-d-xo.html
I have a Hotpoint ew85 its driving me nuts lol. The fan in the main oven never stops its on all the time even without turning on the oven. I believe it triggered when the oven light blew.
Any ideas it driving me crazy?
Hi Penelope, it sounds like one of the thermostats controlling the operation of the cooling fan has gone, test the thermostats with a multimeter to determine which one has failed.
Hello, I have a SMEG SA9066XS. The fan forced function on the oven stopped working. The top and bottom elements work with the fan forced function or in normal function. The 2 elements at the rear of the oven do not seem to heat up. I removed them and tested for continuity and they were fine, they don't look damaged at all. The fans behind the elements are working fine as well. We did replace one last year. Recently the lights stopped working too. Do you have any suggestions? Thanks
Hi Tim, if the elements are OK then check the switches and the thermostat as it could be either or both.
@@eSpares Hi, the bottom and top element heat up when the fans aren't engaged (at the same time) and the top and bottom element work individually on fan forced function. If the thermostat was broken would they both not work the same as the fan forced oven function? When you say check the "switches" which switches in particular are you referring to? I have seen different information about the thermostat - some claim you can't check the thermostat with a multi meter and others that say you can - can you check it? Thanks
could this be related to the bulb in my oven blowing as well, my wife thinks it happened during a storm. Is there an internal fuse that may be the issue? if so, where would I find it please.
Good instruction easy to follow. After I cleaned my Whirlpool oven using a spray , it stopped heating. The thermostat light does work. What could be the problem. The thermostat or the element? Thanks
At 4:34 we explain how if the indicator lamp is working the fault is likely to be an element failure, examine this for damage or use a meter to confirm if it has failed.
Replaced the element. The oven works well now. Thank you.
:-)
Hi we have a nordmende oven which won’t heat on with the fan element or the grill element. Also the bulb doesn’t come on. The bulb doesn’t appear to have gone and the fan does work so there is power. Any ideas?
Hi, If you have a clock and it is not set correctly or on 'Automatic' all the power to the oven will be off. If the oven does not have a clock search our advice centre for 'oven no heat' here:
www.espares.co.uk/advice
My bottom elements seem to get alot hotter than the top and oven smokes any ideas
Hi Steve, if the top elements are getting to the correct temperature it may indicate a problem, check the element for any signs of damage or any cracks that would indicate they are failing if the oven smokes it is usually a build-up of grease and needs cleaning.
Thankyou for the upload, great help
Hi, thanks for your comment, hopefully our video has helped you to resolve the issues with your oven now!
@@eSpares yes and it’s the second time you have helped me 😀👍
i have a problem with my oven fan its making some god awful noises intermittent and i had the motor replaced about 6 months ago all was fine until recently. the noise sounds like dragging metal objects across a floor im sure its the fan because the speed of it keeps changing. is it fixable or will i need another new motor?
Check the blade is not loose or bent and catching and check the element has not 'drooped' and is contacting the fan before suspecting the motor again.
Thanks for your reply just checked it the blade isnt loose or bent and the element is still in place as it should be the sound definitely seems to be coming from out the back of the oven and not in the oven itself where you put your food. the only thing i no notice is the shaft for the motor goes back and forth maybe 10mm im not sure if its supposed to do that or not
i know this is an old post but could you help me.. my oven works fine except the main oven doesnt ignite. i can light it with a lighter but the ignition still clicks like crazy.. ignition works fine with everything else.. is it stuck or burnt out in the main oven part?
Your problem is likely to be one of two things. Either the electrode producing the spark is contaminated from a food splash (if you cannot clean it then replace the electrode).
Or if there has been a food splash on the burner causing a blockage near the electrode then the gas may not be giving a 'flame' at the electrode (again check and clean the burner if required).
eSpares thsnk you for the reply Inreally appreciate it. I shall look into that thank you
😊
Hi Josh , I have a convection oven table top model , after watching your useful video , I want fix a turbo fan to convert it into a air fryer , through your profession is it possible to convert , your advice please ... tks sammy
Convection ovens pass heat into them through the base panel and also from the grill element. We have seen a brand that just adds a fan inside the cavity to circulate the air better and average out the temperature. Fan ovens have there element around the fan and as a result will heat quicker and are less likely to radiate heat overcooking the top and bottom of the food. So in short you may be able to install a fan but it is not likely to be as good as a genuine fan oven.
Josh thanks for your swift reply ,your info will be taken seriously , and will buy a air fryer itself .. Sammy
:-)
Hi my ariston shuts off itself while baking wats wrong with it? Is it the thermal switch?
Hi David, is it overheating? as that would cause it to activate the overheat thermostat, check the thermostat is cycling and the light goes out before testing the thermostats
My oven on stove will come on an heat but wont turn off have to turn breaker off
Hi Yonna, this sounds like the thermostat has stuck, check and replace this if required.
Oh my god, it just needed the clock reset. Thank u so much.
Hi Gavin, glad the video helped.
Hi, I have a Hotpoint EW74, and in the main oven the thermostat light comes on, fan does not work and oven does not heat up. I thought at first it was the element, but then i doubted it as i wasn't sure if this would affect the fan also? Thanks in advance. Edit: I've probed the element terminals on the back, and have resistance well within the limits you've mentioned in this vid.
Hi Cheryl, the element and fan are probably not working due to the cut out as shown at 2:30. Check if this has failed with your meter and if faulty check the oven temperature regulates when replaced as the main thermostat may also have failed causing it to overheat.
Thanks for the quick reply. (Quick disclaimer, i'm not Cheryl, somehow she's logged into TH-cam on my laptop. My name is Stu) So, assuming i have the correct component (it's hard to see in that vid), it is showing open circuit. On your website there are two items that look very similar, ES663793 and ES491201. One is a thermal cut-out, and one is a cut-in. I wanted to double check with you before i order the part. (my oven is an EW74P) Cheers.
Hi Stu, the cut in stat connects the fan when warm, the cut out stat Stock Number: ES491201 should be the one that has failed, check with your meter and replace if it shows open circuit.
Have a look at this one:
www.espares.co.uk/product/es836014/single-pole-oven-door-microswitch
Hi .i have a Montpellier single fan oven, unfortunately the cooling fan is running 24/7 not cutting out after a period of time, help ?
Hi Steven, we have no experience working on your make of oven but can give some advice. Some multi function ovens like Neff will turn on the fan as soon as the function Knob is turned from the 'off' position even if the thermostat is on minimum and the oven is not heating so check this. If all the controls are in the off position but the fan still runs look for a 'thermal cut in' usually on the duct from the cooling fan. This is a switch that should only close when warm to power the fan.
I have a Maytag stove, gas/electric combo and it runs fine most of the time. Whenever I do any long term cooking(Over an hour) the temperature starts to fall off. I can reset the temperature and sometimes it comes back up but sometimes it doesn't Any ideas what this could be?
+Andy Tysdal Have you used a thermometer to confirm the temperature is dropping?. When a gas oven reaches temperature the flame is turned down until more heat is required (if you opened the oven for a minute for example).
I open the oven and heat has gone as well as the temp on the control panel shows it has gone.
+Andy Tysdal Sounds like a sticking thermostat, If it is gas we would recommend you contact a Gas Safe engineer to replace the part.
Thank you very much I will check it out.
I have Beko oven and for the last two days burned the bread I baked only on the bottom tray in the front ( door front). What might cause that problem?
If you are using the oven in the same manner as you have used it before and it is now burning food it suggests your thermostat may be faulty. Select a low cook temperature and watch if the oven temperature indicator starts to cut off and on after a few minutes, this should happen once the temperature selected is reached. If the heat continues rising above what has been selected it would suggest the thermostat has stuck and may need replacing as shown in a similar video: th-cam.com/video/RcpfZMe30s0/w-d-xo.html
eSpares thanks for helping. Usually bake on 240° C, turned it on 100°C and is warm like 100°C. (After 40mins working). The other thing is more than 3 weeks now the light's gone (mentioned just in case if that makes any sense).
The internal light will not effect the cooking temperature, and it sounds like the thermostat is 'regulating correctly. The other problem that can effect the oven cooking evenly is if hot air is escaping from a damaged seal or the door not closing correctly so check these next.
My Whirlpool AKZ 497 starts pre-heat sequence then displays cooking which should indicate it is up to the required temperature. Recently results have been poor so have checked temperature manually with gauge. This is indicating temperature 30-35c below the temperature setting. It eventually after over an hour gets close. Is the faulty component likely to be the sensor? Thanks in advance.
+Alan Shaw If you are not using on the Fan oven setting check the lower oven element as it may have failed hence slow to reach temperature.
+eSpares Thanks for your prompt response. I have ordered from you a new thermal sensor for delivery this afternoon, unfortunately the bottom element doesn't appear to be ex-stock and a delivery time of 2 weeks is quoted. Out of interest these are the readings of all the elements: Bottom 41.6 ohms, Right grill 62.5 ohms, Left grill 37.9 ohms & fan 28.4 ohms. On further testing using fan setting temperature indicator is almost spot on.
+Alan Shaw All the element readings seem fine. As the readings are correct on fan settings it suggests a heating issue. Start for 10 seconds or so and stop then carefully (don't burn yourself) feel for heat in the grill element and through the base. If no heat from the base slowly extend the time till you are sure there is no heat from the base.If the connectors to the module are OK the problem may be the module.
+eSpares +Alan Shaw Thermal sensor has now been replaced. No change in performance. As suggested by you I turned on oven set to conventional at 200c. Top naked element(s) heated up in a few seconds when tested by touching with damp cloth wrapped around my finger. The bottom enclosed element took about 1 minute to warm base of oven and was tested by touching with fingers before it became too hot to touch after a few minutes. Display changed from pre-heat to cooking at approximately 140c some 60c under the setting of 200c. It took about 30-35 minutes to get up to correct temperature. I have since learned that a new bottom element is not ex-stock and an expedited delivery of 14-28 days has been given by your sales people. This is not acceptable so have purchased a new oven. Thanks for your advice.
+Alan Shaw Sorry about the spares delay as we do not have the part in stock. Thanks for your comments.
Hi I have an aeg fan oven. The fan comes on and light comes on but there's no heat just cold air. What do you think it is?
Hi Sanju, the problem is likely to be the element but follow the video to confirm this.
Thanks so much for the reply your videos are great and helpful. *****
😉
our belling oven,main oven,keeps tripping the switch. Top oven working fine. Any ideas
Hi Thomas, the first thing to check would be the oven element as that can cause the electrics to trip good luck.