GPON Multicast Configuration with Troubleshooting the Service | gpontutorials.com
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2017
- More Details at : www.gpontutorials.com
GPON Multicast Configuration with Troubleshooting the Service
How to Configure GPON Multicust?
How to query the bandwidth of IPTV of the service board?
How to query all the configuration?
No video is shown after applying, how to troubleshooting the service?
multicast VLAN
Configure the service VLAN
Update ont line profile
Configuration Procedure
OLT side configuration
1) Add MDU to OLT GPON port, and create the inband management channel.
No need to repeat if the MDU is already added, only modify the line profile (add the gem port, gem port mapping).
2) Configure the service VLAN
The VLAN ID should follow the data plan to avoid confliction.
3) Add the uplink port to the service VLAN
The uplink port should follow the data plan to avoid confliction.
4) Add the service port VLAN
Make sure the gpon port/onu id/user vlan id are matching the data plan.
5) Indicate the multicast VLAN
The VLAN ID should follow the data plan to avoid confliction.
6) Add the uplink port to the multicast VLAN
The uplink port should follow the data plan to avoid confliction.
7) Add the IGMP user
Make sure the service port is created.
8) Configure multicast VLAN default uplink port
The VLAN ID should follow the data plan to avoid confliction.
9) Configure multicast VLAN program match mode
If the mode is disable, not need add the program;
If the mode is enable, please add the program IP address.
10) Configure multicast VLAN IGMP version
Make sure the version is matching the data plan.
11) Configure multicast VLAN IGMP mode
Make sure the version is matching the data plan.
12) Add multicast VLAN member
Make sure the igmp user is existed.
MDU side configuration
1) Configure the service VLAN
The VLAN ID should follow the data plan to avoid confliction.
2) Add the uplink port to the service VLAN
The uplink port should follow the data plan to avoid confliction.
3) Add the service port VLAN
Make sure the ETH port id/VLAN id are matching the data plan.
13) Indicate the multicast VLAN
The VLAN ID should follow the data plan to avoid confliction.
4) Configure multicast VLAN IGMP version and mode
Make sure the version is matching the data plan.
5) Add multicast VLAN member
Make sure the igmp user is existed. - วิทยาศาสตร์และเทคโนโลยี
hi. is there any way that i could contact you. i have few configurations that i am having trouble configuring for my IPTV. I am using OLT (MA5608T) and MDU (MA5626)
skype ID: hayder_ali1
For more Details you can visit www.gpontutorials.com