GPON VoIP Configuration with Troubleshooting the Service (HUAWEI) | gpontutorials.com
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- GPON VoIP Configuration with Troubleshooting the Service (HUAWEI)
More Details at : www.gpontutorials.com
Configuration Procedure
OLT Side configuration
1) Add MDU to OLT GPON port, and create the inband management channel.
No need to repeat if the MDU is already added, only modify the line profile (add the gem port, gem port mapping).
2) Configure the service VLAN
The VLAN ID should follow the data plan to avoid confliction.
3) Add the uplink port to the service VLAN
The uplink port should follow the data plan to avoid confliction.
4) Add the service port VLAN
Make sure the gpon port/onu id/user vlan id are matching the data plan.
5) Enable the VLAN user Bridge function
6) Add the ip route to softswitch, ping the softswitch successfully..
MDU Side configuration
7) Telnet to the MDU
8) Configure the user VLAN,.
The VLAN ID should follow the data plan to avoid confliction.
9) Add the uplink port to the user VLAN
The uplink port should follow the data plan to avoid confliction.
10) Configure the VoIP media and signaling IP address
Make sure the ip address matching the data plan.
11) Add the MG interface, set the MG attribute parameters
Make sure the ip address/port number are matching the data plan.
12) Add the mgpstnuser to the MG interface
Make sure the terminal ID and telephone number are matching the data plan.
Q:Upon completion of the VoIP service, if the called get the ringing, but without voice, what is the problem?
A: VLAN user Bridge function should be enable.
big thanks bro
Hello, Website is down for weeks what occurs? It was very important resources for us. Can we help to get it up and running back!
For more Details you can visit www.gpontutorials.com