Holy $#!+ Watch this factory iron head Pontiac 455 rev !!!!
ฝัง
- เผยแพร่เมื่อ 2 พ.ย. 2023
- 1971 Pontiac 455 with 1970 #64 casting 455 HO heads, a 4.21 stroke factory crank, Eagle Forged H Beam connecting rods, 4.185 JE SRP forged pistons, Total Seal molly file fit rings, Powerbond SFI steel balancer, Comp Cams 236, 242 @ .050 on a 110 LSA, Harland Sharp 1.5 roller rockers, our Street/Strip porting, ported Edelbrock Performer RPM intake and believe it or not Factory Q Jet carb. #new #viral #pontiac #education #dragweek #how #automobile #beast #build #engine
- ยานยนต์และพาหนะ
Throttle response is always a lot better when theres nothing bolted to the flywheel. Sounds great though.
Right😂
It doesn't have a flywheel on it look again.
Took the words right out of my mouth 😂
Exactly
@@tomcherry7029umm that big gold spinny thingy is a fly wheel my friend 2:38
Evolved engine colors that have been painted Pontiac has to have the most beautiful blue shade for any motor not to mention Pontiac has some pretty awesome motors
Pontiac definitely hit it out of the park with engine color. I wonder how they determined the colors ??? Thanks for following !!! Check out my Podcast every Wednesday night from 7PM to 8PM Eastern.
All torque. Love those old Pontiac motors.
Me Too :) Thanks for following and please subscribe to our channel. Don't for get to hit the notification bell for any future videos we do :) Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Back in the mid 70s I owned a 16 foot ski boat with an Olds 455 to Jacuzzi jet drive. Motor was balanced with a Isky cam. Fuel was always Chevron Custom Supreme (100+ octane) thru a Holly double pumper carb. When you stomped on it, the boat would hit 75 mph at 6000+ rpm. It drank fuel like crazy. Would haul 6 skiers from deep water starts with ease. It was a blast to own and run.
My parents took my sister and I to the Oakland Estuary to the Berkley Jet boat dealer in 1966. They picked out a 16' green and gold metalflake boat with a 350 hp 327 Chevy engine, and we went camping and skiing just about every weekend during the summers. It had a top speed of 62 mph but got there in three seconds..
ill take shit that never happened for a 1000 alex
@@MrR6guyif you find this hard to believe then you must be one sad broke mf
Never heard of a motor balanced by the cam 😂
@@bradleymadosh911 motor was balanced and it had the cam as well.
I'll never understand how anyone could enjoy the sound of a 4 or 6 cylinder engine when there's this music to listen to.
LOL I agree, but there are some really sweet sounding high revving 4 and 6 cylinders. Thanks for following !!! Make sure and check out our bench racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Well it is going to rev a little quicker because your just running a auto drive plate without the weight of the converter. Any way very Nice .I have built may of these as well. They are a beast.
I like the QuadraJet, especially the M4MC style
Started of thinking to going back to the quadrajet. Definitely better gas mileage tooling around town, and the back secondaries are like kitchen sinks! Set up right, they're as responsive as any holley or edelbrock .
I’m a Flowmaster man myself and they sound so sweet
The best is open exhaust :)
The Flow masters use the delta flow technology that are welded inside the muffler casing made of thick metal so they are less likely to fail and blow out like a glass pack type of muffler that uses a thin perforated core wrapped with packing . At the speed shop I worked at years ago most of the times the Flow masters made more HP on the cars that we installed those on when we would run them on our chassis dyno and did prior runs with the stock exhaust or a exhaust that had run glass packs or the turbo mufflers and then we would run the car again with the Flow masters and they usually made more power especially once we started jetting for optimal HP and torque along with timing and advance curve settings. We had several turbo mufflers on big blocks that were new that actually split open at the seams and crimps because they were to restrictive and stopped recommending them verses the all welded Flow masters . My boss had a 78 pro street Elcamino all tube chassis car with a certified cage that was making 1,500+ HP to the rear wheels that had a stroked and blown 454 Chevrolet engine and he used the welded Flow masters on it and they took the punishment from that engine no problem. The car could be driven on the street but could knock off 8 second 1/4 miles when driven to the tack and some tuning changes made with the blower pulley. We built a certified tube chassis for a customer who had a 69 Pontiac GTO that was at one time a national record setting drag car that had a 455 using Kaufman heads and custom roller cam with the firing order changed with a aluminum sheet intake and a 5,000 cryoed custom crank that years ago was one of the quickest and fastest all Pontiac powered drag cars here in the good ol USA that was running mid to low 8s at a 160+ mph in the 1/4 mile that was named Bottle fed Goat which I still have a picture of it hanging in my garage to this day . We used to test and tune the car at the Brainered international raceway back then to work the bugs out of the car before the owner started racing it all over the country and setting records with it until he eventually retired from racing and sold the car and I've been trying for years to find it with no luck unfortunately.
Well said, the only problem I had with a set of Flowmasters I ran for years, was the inside divider plates rusted loose and eventually block flow :( @@peteloomis8456
Flowmaster s for me. Their single chamber ones (American Thunder series) sound just right. Cool old Pontiac!
Thanks for the KUDOS
Pontiac fan since the 60s 389 with six pack
Thanks for following :) Love those Trips and the sound they make 🙂
I had one in the 70's. 389 SD with tri power. I put it in a 1968 LeMans Sport. 400 turbo with Hurst dual gate with 3:90 Limited slip posi differential. I did a 10:70 qtr. mile with it in 1976.
Wow that sounds great! My first race car in high school was a Pontiac Lemans sport. Which I still have in the garage with a 455! I can just imagine what that engine with a set of RAM AIR V heads would be like!
1972.... Lemans Sport... Nice looking car alright
That's to cool, wish I still had my high school car. It was a 68 Firebird with a Pontiac 350 I built and ran 13.60's on M50 bias ply tires.
@dcimotorsports1111 ya it's been hard over the years! It's a 1971 Lemans sport with a 455 and a turbo 350 I built in tech school in 87! I've had my car since 84
Nice to see the Pontiacs still being appreciated. Much better engines overall than 1st generation chevy small blocks.
I agree 100 percent, but there are lots that dont agree :)
I know some disagree, but I always lean to dynomax. A company willing to put up cfm ratings isn't just selling sound. If its sound I want... straightpipes it is.
UltraFlo's for the win !!!!! If they'll fit.
I like the sound of Dynomax mufflers. They are combo of the lod turbo mufflers and the newer straight through can mufflers.
Ya, for not much louder than oem, but more performance it’s hard to beat good Ol’ Dynomax super turbos. 1 of the best performance for money mufflers is the Ultraflow line
Definitely quiet @@DMcElfresh101
Anyone use hooker aero chambers. I’ve been using them for a while like the sound and performance
It has a flexplate and no torque converter, or flywheel. Of course it will rev quick.
Mine does it…. In the car. 😊
Watch my video I just posted of the 1st to 2nd test hit in a 68 Firebird we just finished up. Hits the rev limiter immediately in 1st and 2nd gear. Its all in the cylinder heads.
right...lol
@@dcimotorsports1111 I saw the video of one you did last year and it's reve was unbelievable. People say how fast mine revs but that thing was like a two stroke w really small sprockets
HA HA Thanks@@oldschooltwist18
An old, experienced exhaust specialist told me years ago that a Pontiac V8 & a big block Mopar are the 2 hardest engines to quiet the exhaust sound. (I was there getting mufflers on a Dodge 440 & i must say i had to agree with him.)
I agree, but the exhaust note is cool to listen to :)
flow master
Man, this right here proved what my dad was telling me about this engines potential he had in his 1969 Pontiac Lemans…👍🏾
Sounds like Pops was a smart man :) Thanks for following !!! Make sure and check out our bench racing Podcast every Wednesday night from 7PM to 8PM Eastern.
@@dcimotorsports1111, yeah, my dad brought a few add on’s from Super Shops back in the day… I just want to recreate a little 68 or 69 Lemans like he had with a little street engine in it to cruise to car shows… But, when I saw a video of your shop and performance and quality work, I was sold on where I’m going to get an engine from…👍🏾
Thank U Sir !!! @@southtexashustler
I love Pontiac engines ! My dad has a GTO 69, THE CAR WAS STOLEN 3 YEARS AGO, never see it againg. 😮😮
Man that sucks 😭 That happened to a customer of mine, but they did find it. It was trashed though😡 Thanks for following !!! Please subscribe to my channel and don't forget to hit the notification bell for any new videos I post. Also you have a standing invite to my Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern. Hope to see you there :)
Oh man.... now hearing this i will take precautions I have been so lax. Oh man that really sucks. You know there changing the vin.thats sucks
Great sound either way. Love the lope of the cam... reminds me of my 69 400 RAIII engine that I snatched from a 69 Judge, had rebuilt and then put into my 68 Firebird, in 1976. The car had a 278 gear, but still turned 12.80 @ 123 mph at Fremont/Baylands raceway.
Had a Oldsmobile omega with a mild built 455, cant remember it was 250 or 260's gears , tried 373, mph went down, time went up, 342 same thing, 308 time was the same but mph went down a few mph didnt have a 273 set to try no one believes it had that high of gears and ran so fast through the 1/4.them low winding big blocks love high gears and wide ratio transmission. Over 500 tq and a wide power band
@@hopebrowning6300 Buick, Olds and Pontiac's torque were the reasons why Chevrolet's Mkt. Dept lied about their hp to sell more cars.
Pontiacs sound glorious with 60 inch X 3 inch round straight pipes.
I like the Dyno Max Mufflers and used to run those on my truck as well for 12 yrs. Running Flowtech now to match my headers.
Its funny how we all used to like Flowmasters back in the day :) I'm with you I like the more mellow tone.
I had a quadrajet done by a guy in California for my 396
Worked out was flowing 950 cfm & that motor took it all....
Beast 🤘👿🤘
I love the Q Jets, just wish they had bigger fuel bowls.
Sounds great Don.
Nice job.👍👍
Thank U Sir !!! :)
Back in the 80's my brother had a 1950 Ford pickup & he had a 455 in it. Bad ass old truck.
NICE!!!!
Awesome.
💪💪😁
I bet my Dad would of liked such an Engine Setup in his 1970 Firebird with HO 455 Engine
Gotta love Poncho TQ 😍Thanks for following !!! Please subscribe and make sure to hit the notification bell for future videos. Come hang out with us on our Bench Racing Podcast from 7PM to 8PM Eastern.
Had both of those mufflers on my 67 Chevelle at one point. The FM’s had the cool factor at idle no doubt, but were annoyingly loud at “cruise”. DM’s were exactly opposite. I drove more than I idled, so I chose the DM’s.
Agree and same reason why I use Dynomax or Magnaflow. Thanks for following !!! Please subscribe and hit the notification bell for future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Nice setup, I may setup my next 455 like that
This is a nice combo and runs really well. Keep in mind the cylinder heads have a big role in an engines performance.
Wow! Someone who knows about a QJet! Kinda rare these days.
I love these carbs. I wrote a performance tips manual on them back in the late 80's and sold it. The DCI in my name stands for Don's Carburetor INC. That was how I started my business 43 years ago as a carburetor shop. Back then we everything had a carburetor :)
I've always had a love for the Dynomax. I had some on my 86 Mustang years ago.
Ha Ha Pontiac's are TQ monsters :)
😂😂 "Closed Caption on" motor starts, motor idles - music, motor revs - music. 😂😂😂
I Really like the Sound of the Dino Max
Dang, that engine sounds great!
Thank U Dave :)
I love open headers ❤
Seems like everyone I know likes them open :) Thanks for following !!! Please subscribe and hit the notification bell for future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Good video! The Dynomaxs have that classic pop. I've had Purple Hornies and Cherry Bomb glasspacks on a few vehicles I've owned, but I've always been more of a chambered muffler Flowmaster guy 👍
Thank You for the KUDOS !!! I like the deep tone of a good turbo muffler. I did like the Flowmasters when they first came out, but as I have gotten older I'm reverting back to the turbo :) Check out my Podcast every Wednesday night from 7PM to 8PM Eastern. Its just a casual place to hang out and bench race :)
Very sweet Motor, love that throttle response, just stumbled onto your channel, not far away up here on the west side of Cleveland
Thank you and Thanks for following !!! Make sure and check out our bench racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Really nice engine build, I like the sound of the Dyno Max's. PRW just came out with a new Quadrajet carb.
Thanks for the Kudos!!! I sure hope the carb is better than their other products we have had in the shop. Thanks for commenting and following my channel. Please subscribe if you haven't already. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
The buick GS 455 cars were nice, guy down the street when I was a teenager had a skylark that he yanked the 350 out of and put the 455 in. He took me on a couple of wild rides and I was hooked for life
Flowmasters for me........both sound amazing though...winner either way
Thanks for following !!! Please subscribe to my channel and don't forget to hit the notification bell for any new videos I post. Also you have a standing invite to my Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern. Hope to see you there :)
Love Poncho’s! Love the Dynomax’s too
Flowmasters.....that's what I have on my Olds 455. Love the sound !!
Everyone likes that sound :) Thanks for following !!! Check out our Podcast every Wednesday night from 7PM to 8PM Eastern.
Nothing as crisp as a new or pro built Quadra jet!
In my opinion next best thing to fuel injection 🙂 Thanks for following !!! Please subscribe and hit the notification bell for any future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night form 7PM to 8PM Eastern.
My mom had a Pontiac grandeville. It had a 455 4 barrel quadrajet and a two speed power glide trans. I'd pack 8 friends in it and smoke dope running a hundred every where we went.
Ha Ha a child of the 70's and 80's LOL. Come hang out with us on our Podcast every Wednesday night from 7PM to 8PM Eastern. Thanks for following !!
Course nothing sounds better than open headers lol
Sounds great ! For a 5200 rpm mill ... Nothing but love ! I'll take the old school 375 or 425 wildcat over anything else all the way , when it comes BOP . Sweat motor for sure , especially for a truck .
BOP all make big TQ 🤪
Beautiful nice and simple setup and I'm sure it's reliable
Thank U !!! Yes this set up can be driven daily if you wanted to :)
We had one in a 20ft open bow boat and a Berkley jet drive in the early 70's was a beast of a motor.
Nice !!! I would love to build a jet boat with one of my RA5 engines
I like the sound of the third muffler combo
Ha Ha yep open exhaust seems to win every time. Thanks for following and Please subscribe to my channel and make sure to hit the notification bell for future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Sounds nice indeed . There is always tuning on the engine after it goes on the street
My self I'm a magnaflow person that I put on my 69 gp sj 428 and added the TA, tips but I do like the sound of the good old cherry bombs
Nice engine Don !!
Thank U Sir !!! This is one of our best sellers and we have lots of them out there like it :) Thanks for following !!! Check out our Podcast every Wednesday night from 7PM to 8PM Eastern.
Throttle response is going to be phenomenal when nothing is bolted to the crank
I had a 455 Pontiac engine in a 69 Catalina it was awesome
Nothing like the big TQ of a Pontiac 455 :)
Please subscribe and hit the notification bell for future videos. Come hang out with us every Wednesday night on our Bench Racing Podcast from 7PM to 8PM Eatsern.
GREAT VIDEO
Thank U :) Thanks for following and please subscribe to our channel. Don't for get to hit the notification bell for any future videos we do :) I have a Standing invite to come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Does that engine even turn a full revolution before it starts? Sweet !
Gotta love a perfectly tuned engine :)
Thank you for your knowledge and video's USA 🇺🇸
Thank You for the KUDOS and following our channel !!! Make me happy people are enjoying my content and learning too :)
With a stroke of nearly 4 and a quarter inch, you would think this powerplant would be less cooperative when it came to higher rpms! This is one strong Pontiac!!!
Great job guys!!
Thank U and Thanks for following!!! Please subscribe to our channel. Don't for get to hit the notification bell for any future videos we do :) I have a Standing invite to come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
@@dcimotorsports1111 Thanks much for the invite! Love talking engines! Got a new subscriber!
Them flowmasters sound good I got them on my 67 Impala 283
Seems like the Flowmasters are the leader in sound for everyone :) Thanks for following !!! Check out my Podcast every Wednesday from 7PM to 8PM Eastern
I'm a die hard Flowmaster guy,awesome mufflers
I like the dynamax better but I like it straight pipe best good job on motor guys sounds great
Thank You !!! Thanks for following, Please subscribe and hit the notification bell for our future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Poncho Power!!! Flowmaster ftw.
Nice 👍 my friend back in highschool stuck a 455 in a 80's Buick regal everything stock until he was board and wanted more power but to blow the engine he ran a can of Eather into the back 4-barrow it already would smoke the tires into drive but before it would grab he hit the Either 😂 needles to say he only got to do that a few times before the engine went out that was a lot of fun but the motor All rebuilt was really nice he even out Run our township cops One night they were going to pull him over anyway so he stopped right in front of them about 2am in the morning and he gave that car Hell i sat on the Town bench and watched the whole thing 😂they never caught him but knew who he was and lived 😮 LoL
Memory's !!! That's what life is all about :) Love the story 🥰 If you haven't already, check out our Podcast every Wednesday from 7PM to 8PM Eastern. Thanks for following 🙂 Make sure to hit the notification bell.
@@dcimotorsports1111 thanks i will i also got to enjoy two chases by the cops once in my 1976 Camaro and once in my 1974 Chevy Caprice lol 😂 in the early 90's when the cops were a little bit better then they are now but okay 👍 thanks
I like the Flowmaster mufflers better.
The Flowmasters do have a unique sound and I used to love that sound. Now I must be getting old lol , and I like the Dynomax better :)
Really, the 2 different mufflers each sound great, I usually like Dynomax, but this combo sounds great with Flowmasters. Even open exhaust is still very nice and not too radical sounding
Yeah, because with a low RPM, boat-anchor Pontiac, it's all about the sound, not about the non-existent horsepower.
@@daryllect6659 why is your wrong opinionated information even relevant? I’m guessing you’re a damn Chevy only fan by your comment, so whatever you’re a fan of makes monster power on every engine they’ve ever manufactured?
@@DMcElfresh101I'm a Magnaflow fan myself, I think 90% of the people where I live run Flowmasters and drive like they're in NASCAR. As for his low revving boat anchor response, he must have sore feelings when a Pontiac of whatever type blew the doors off of whatever highly tuned machine he was running
@@kalybnielsen4183 definitely not against Magnaflow, used them several times with no regrets! Yes, some people are so biased on “their” brand it’s crazy. I mean nobody was doing great things in late 70’s/ early 80’s far as amazing engine output.
Man! Snappy! Sounds great with lift in the low .500s! Beautiful! And flowmasters alllllll the way, man! Next best thing to open headers! Lol. Those other ones make it sound like a darn putt putt patty wagon. 🤣🤣🤣
Ha Ha Flowmasters definitely have a way more aggressive sound.
the only thing that bugs me is the instant start up. good tune but, I like to crank a short bit first to build oil pressure, then fire up
Thank U SIR, for the KUDOS !!! We have been doing this so long now that we get to see engines we built for refreshes and almost all of them we could re use the bearings. Obviously we don't, but the point is they show no bearing wear hardly at all after even 90,000 miles which pretty amazing :)
Very disappointing not getting to hear that throttle crack to 5K in the open header layout 😫
Very healthy sounding though
Nice job guys
Check out my other video I done with open headers :) Thanks for following !!! Please subscribe and hit the notification bell for future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
I had a 421 pontiac & 389 that would bust built small blocks and Dodges ,,fords never got close
Nothing like Poncho TQ especially on the street🙂 Thanks for following !!! Please subscribe to my channel and don't forget to hit the notification bell for any new videos I post. Also you have a standing invite to my Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern. Hope to see you there :)
Valve covers make that "injun". 🤣💪🇺🇲🏴☠️
Thanks for following !!! Please subscribe and hit the notification bell for future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Yep that’s I remembered about them old Pontiacs. Distributor in the rear up against the firewall. Made it a little difficult to tune up.
It depends on the car they are in. Its not terrible for most of them. Its a whole lot easier if they have electronic ignition too :) Thanks for following !!!
It'll almost idle smooth once the mass of the torque converter is added.
Its does effect it some but not as much as you might think. Thanks for following !!! Please subscribe to my channel and don't forget to hit the notification bell for any new videos I post. Also you have a standing invite to my Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern. Hope to see you there :)
An Old School work of Art!
Thank U :)
I like the Dynomax sound
What a lion
In Sheep's clothing LOL. Thanks for following !!! Please subscribe and hit the notification bell for future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
I like the Dynomax
Thanks for following !!! Please subscribe and hit the notification bell for future videos. Come hang out with us every Wednesday night on our Bench Racing Podcast from 7PM to 8PM Eastern.
Always did like the Quadrajet carb. Had a 1966 Olds 88 with the 425 high compression engine, had the Rodchester 2 bbl when I bought it, changed manifold and put on the Quadrajet and never looked back. If you got a good one they were great if not what a pain in the a#$. 😅
A Q-Jet when set up properly like you say can't be beat for an every day driver and even some race applications. Thanks for following !!! Please subscribe and make sure to hit the notification bell. Check out our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
I built a 400m Ford with a similar Comp.Cam profile. Very streetable.
Cam works very well for a weekend warrior or daily driver :) Thanks for following !!! Please subscribe and hit the notification bell for future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
Pontiac was the main reason for the Super Stock Class back in 1962 . When I was a young fella , I used Pontiac 455 blocks and Isky cam and 400 heads huge bang for your buck in the old days .
Number 2 muffler sounds nasty when you give it the bean. Till then it’s class
Thanks for following, Please subscribe and hit the notification bell to get notified of our new videos. Come hang out with us on our Podcast every Wednesday nights from 7PM to 8PM Eastern.
Never have cared for the sound of Flowmasters. Much prefer the sound of a packed muffler. Give me the dynomaxes or magnaflows.
Nothing like a Pontiac engine
My Dad got me hooked when I was a kid. He always had some kind of a fast Poncho while I was growing up. I have fond memories of him rowing through the gears in his 67 GTO, 63 Catalina with a 421, 68 Firebird, ^9 Firebird you get the idea lol.
I love the valve covers that say 100% injun, and he proceeded to rattle off a laudry list of aftermarket parts. Bwaahahaha
Thanks for the KUDOS on the valve covers. I know some want to hear whats in the engine others just want to hear the engine lol.
Both mufflers sound great but I love the sound of the Dynomax. In order to make a standard 400 hp (1977 - 500577 block), what would you do to make it perform? I'm looking for an upper 12 second street car. It has 3:42 gears, a holley 750, torquer 2 manifold, 1.52 scorpion Rocker Arms, a custom grind cam thats slightly hotter than the Ram Air 3, hooker headers, thought I wasn't to change to ram air exhaust manifolds, a coan torque converter
Eventually, I'd let to get a 3 angle valve job
Should the heads be ported and polished as well? I was thinking of getting an Edelbrock performer for and getting a perfor m ance kit for rochester carb from Clifs. What do do you think? Any suggestions?
Scott the 557 blocks are pretty weak and the mains will blow out with not much over 400 HP. So you may want to consider an earlier block to build on. I would not use the performer, the performer RPM is a way better intake. Q-Jets are awesome carbs, but will require a killer fuel system for anything over 350 HP. With the correct cam and cylinder head work 12's is achievable. Porting would just be icing on the cake.
Nice. Dynomax especially if they were a little louder
Thanks for following, Please subscribe and hit the notification bell for our future videos. Come hang out with us on our Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern.
I took one of those and bored it .108, put AMC 390 12:1 piston which had the perfect piston pin position to use Chevy .400 over length rods which had a smaller rod journal than the 455. Offset ground the crank by .030 stroking the engine to .060. Came out to I think 502 ci with 14:1 compression with the small chamber heads. It was in the 1980s when I did it.
Cool, I like cross breading to get something unique :)
That's all I'd ever have on my cars is quad jet carbs 71 monte 77 and 84ss they are the best for the buck, and for use in a daily driver as well
It seems people either love them or hate them. I personally love them and use them whenever possible. The only issue with a Q Jet is their fuel bowl size. You have to have a killer fuel pump and big enough supply line.
quadrajets work amazing when you rework them i used to get a lot from mondello performance they had a throttle shaft bushing kit that kept the carb from pulling air and howling that with a few other small improvements and it was an awesome carb
Yes they are !!! Not many put 2 and 2 together with the name of my company, but the DCI in my company stands for Don's Carburetor INC. I changed the name of my company in 1995 when I bought my partner out. So I have a very good understanding of the Rochester Quadrajet and actually wrote a hop up manual on them. I still have the master copy somewhere around here :)
@@dcimotorsports1111 I rescued quite a few of them from dumpsters do you guys have an online store that sells stuff for them ? Im building a mopar 383 i plan on keeping a few quadrajets on the side for different situations.
@@dcimotorsports1111And what's the name of it? I don't need one, but I'd like another one, for some reason I enjoy the QuadraJet manuals, have every GM one available from the early 70's to the early 90's, I have a Gherraty one, he focused on RV economy and power, it's good reading. The people that criticize or trash on QuadraJet's either don't understand them or have never experienced a great running one
I will dig out my master and post a short on it and reprint some for sale. Stay Tuned :) @@kalybnielsen4183
The 750 quadrajet was one of my favorites, albeit hard to come by. I'll take the dyno-max muffs any day, since I do more than idle.
Sounds just like the 400 in my TA my 400 really turns on the rpm ! Been told if I switched to 455 it wouldn’t turn nearly as hard as the 400 with the same cam and parts
400's are fun and have a little broader power band than the 455. I love the 455 for its TQ though. Thanks for following !!! Check out our Podcast tonight and every Wednesday night from 7PM to 8PM Eastern.
What’s crazy is I have a 461 stroker engine with number 13 Pontiac heads runs great but can’t get that wicked aggressive revving 😢
Don't beat yourself up to much. It took me years until I figure out the right combination of valve seat angles and head porting to get it like this.
So do you have to have the heads ported? the only thing I did to the heads was 3 angle valve job
And I have a Howard’s rattler camshaft it has a 480 intake lift and a 488 exhaust lift as well
@@BobbyGreen-py1hoYes heads are ported. Keep in mind though that we have done a ton of R&D to get the exact valve seat angles to perform like they do. This isn't a standard 3 angle valve job like most shops perform. We used to do ours like that, but have since learned a ton more over the years and applied it. :)
❤❤❤nice motor I prefer the straight headers😂😂😂😂
Thank You for the KUDOS !!! Come hang out with us every Wednesday night on our Podcast from 7PM to 8PM Eastern. Thanks for following :)
Nothing better than old school Detroit muscle. Wonder if I could put that in a Toyota Corolla
🤣 It can be shoe horned into anything with a welder and a cut off wheel LOL
I like the sound of the hooker aero chamber mufflers, had em on my built engine. Idled similar to this one
I have never ran a set of those. I'm a Dynomax or Magnaflow guy. Used to be a Flowmaster guy when I was younger LOL. Thanks for following !! Check out our Podcast every Wednesday night from 7PM to 8PM Eastern.
Second mufflers had more of the crackling sound. I like it 👌.
I like the open exhaust, the mufflers are too quiet
Nothing like the sound of open headers, but I do like hearing the engine mechanical s to make sure they are in harmony 🙂 Thanks for following !!! Please subscribe to my channel and don't forget to hit the notification bell for any new videos I post. Also you have a standing invite to my Bench Racing Podcast every Wednesday night from 7PM to 8PM Eastern. Hope to see you there :)
Love your videos. Im building a 428 with ported 96 heads. Was wondering your opinon of a nice street strip cam? Its going in a 69 gto with 355 gears and 2800 stall. I was going with a hyd. Roller. Thanks have a nice day
Thanks for following !!! Make sure and check out our bench racing Podcast every Wednesday night from 7PM to 8PM Eastern. I will be promoting cam packages and other products for exactly what your doing.
Flow master
3 chamber delta flows. But WOT no mufflers
What kind of choke is on that carb? Looks like a hot air carb but i dont see it connected to the intake.
This is a later model carb with an integral choke and choke housing. These were either heat actuated or electric. We put a electric choke stat on this one.
Are you running dish pistons in it to get that compression ratio
No they are a flat top with 2 valve reliefs. The #64 heads have bigger chambers factory rated them at 87CC, but most measure around 93 CC's. Another contributing factor is the pistons are usually around .022" to .028" in the hole which reduces compression as well. So in reality off the production line engines that were rated at say 10.5 to 1 were actually closer to 9.5 to 1. That's why all your NHRA Stock and Super Stockers blueprint their engines to factory ratings.
Nothing flows better than open headers
Believe or not though. The engine makes a little more TQ with mufflers or at least a 18" long pipe off the headers.