Great video. A lot of people have taigen/ torro tanks would be great if you could post similar video for that tank brand. How to fit 8 pin to upper turret etc.
Hi again! So for the stock heng long board you know how when you shoot the cannon and the whole tank moves, does it do that with the Clark board as well
Hi , any chance of doing a vid on how to use / set up the extra pins for the recoil servo on that particular board ? I just bought one and would like to know how to go about using the extra outputs , I just purchased a tk 22 and a mato 1010 6 channel transmitter , some info on those extra outputs would be much appreciated
I have a Tamiya henglong airsoft. I just ordered the Clark board. Is it pretty much plug and play, and will I need a new 4channel radio? Or will the stock transmitter work just fine?
Hi Steve, Great channel, so useful!! Could you explain how I get the main gun to recoil, sound and flash at the same time, I can get the gun to recoil on its own with no sound or flash, or I can get the sound and track recoil, but with no gun recoil? Hope that makes sense, any ideas? i have a Tiger 1 with Clark tk22 T1 and a 9x transmitter/ receiver. I am really struggling with the wiring from the Clark site! thanks in advance. Peter
real nice video I just got a board but im new to these still need all the wires. thanks for explaining. Can I ask you something please?the 8 pin cable what does that plug into. thanks.
Hi mate! Hope your trucks going well and your all good. Im sure you are!. Ok your the only cool guy i know who explains things clearly and has the same stuff as me lol. Ok...my question is: How do i change the momentum effect on the tk22 board? Ive got he sony remote (some Chinese knock off), and ive got the wires for it, and jumper, but whats the sequence for plugging it in, and what to press, do i have the power on? etc etc. Ive looked at clark website (and know i have to press the sleep button - But the instructions from there are crap) If you could just gimme some steps 1,2,3 ....and so on, that would be awesome!! Mate thx so much, your online pal, Andy-UK.
I like your videos because are really helpful, I have saved a lot off them for help reference, Can you show the hull reforcement you did on your tiger it looks Very interesting as well thanks
Hi man, How things, are you going to make that vid of the clark TK-22 and the TBS mini? the the reason I am asking because I have this system and I do not want to Fry it, I had another system for a tank and through my overconfident stupidity I blow the lot, I supposed I deserved it,anyway i never take that chance Like that unless i 100% know what I am doing, so please please do this I need help. So thank you will you let me know when it is ready
Hi do you know how the smoker works? I seen it needs a switch too. you have to turn it on by the switch everytime to work? do you know if the smoke is connected to the motor speed too?ty
hello steve, could you do a video of this, just on your Taigen Panther? I want to know if the installation is different depending on if the tank is henglong or taigen
Hi ok, Why have you not a guide on how to wire the clark 22 and the tbs mini I have yet to find one? You have shown how to wire the clark why not the Tbs mini is it top secret or thingthing ha ha please will you do this thanks
I'm thinking of swapping just the speaker in my Heng Long KV-1. If I just change the speaker, will it change all the engine sounds or do I need a full new circuit board and speaker?
RC Tanks & Trucks 24/7 Ah right, OK. Another thing: I have a heng long KV-1 ehkranami, was thinking about putting a KV-2 turret on it. Will it just be a simple swap or will I need to do other things? KV-2 turret comes with the bb gun stuff and all the wires. Theoretically, I only have to swap the turret ring? Any suggestions?
If the diameter of the turret ring are the same you won't need to change it. Should be just a swap. From memory the KV2 turret is much larger but the gear ring on all heng long RC Tanks are the same.
+lam justin no the infra-red is for the remote control to communicate with the Clark board to make changes. Nothing to do with battling with other tank's.
I understand that by installing this module, you have to use a new receiver and transmitter. the original receiver heng long does not work. true? the original receiver has integrated the sound module? How many channels should the new station have? Thank you
That motor plug can not handle enough current for red390 motor 🤔 same with battery. These motors suppose to be 20a motors each.. and have bullet connector. Also going to use ELRS sbus setup.
Hi everybody I got a mato tiger 1 and the sound has just stopped working.anybody have any ideas.the tank is a ready to run out the box everything elce works fine
Hi really want to watch this video but it seems the audio cuts out at 1:20 or so???? I've checked a few computers and it's the same.
Great video. A lot of people have taigen/ torro tanks would be great if you could post similar video for that tank brand. How to fit 8 pin to upper turret etc.
Yeah I need to get more tanks
I just bought a Clark tk 50 do you know if it works with torro king tiger?
Sorry not sure man
Hi again! So for the stock heng long board you know how when you shoot the cannon and the whole tank moves, does it do that with the Clark board as well
+Black hawk gameing yep although this can be programmed to be turned off along with many other things
Hi , any chance of doing a vid on how to use / set up the extra pins for the recoil servo on that particular board ? I just bought one and would like to know how to go about using the extra outputs , I just purchased a tk 22 and a mato 1010 6 channel transmitter , some info on those extra outputs would be much appreciated
+aussieaeromodeler hey mate, sorry I got rid of my Clarke tanks. Only have tamiya now.
Hey, is everything plug and play, or do you need to go into settings for things like setting up a reload sound for the cannon?
I have a Tamiya henglong airsoft. I just ordered the Clark board. Is it pretty much plug and play, and will I need a new 4channel radio? Or will the stock transmitter work just fine?
Hi Steve,
Great channel, so useful!!
Could you explain how I get the main gun to recoil, sound and flash at the same time, I can get the gun to recoil on its own with no sound or flash, or I can get the sound and track recoil, but with no gun recoil?
Hope that makes sense, any ideas? i have a Tiger 1 with Clark tk22 T1 and a 9x transmitter/ receiver.
I am really struggling with the wiring from the Clark site!
thanks in advance.
Peter
real nice video I just got a board but im new to these still need all the wires.
thanks for explaining.
Can I ask you something please?the 8 pin cable what does that plug into.
thanks.
There should be a plug on the underside of the tank, near the turret. Plug it in there and then the other in the Clark tk22
RC Tanks 24/7 hey thanks I sold my clark board already it was too much to learn so I just have a tamiya dmd
With this board in a HL tank, it replaces the board and retains the HL 2.4 transmitter?
if I were to put this board in my tank, would the heng long IR be able to battle taigen and tamiya IR tanks?
Did you say the outer most port is elevation?
Hi mate! Hope your trucks going well and your all good. Im sure you are!. Ok your the only cool guy i know who explains things clearly and has the same stuff as me lol. Ok...my question is: How do i change the momentum effect on the tk22 board? Ive got he sony remote (some Chinese knock off), and ive got the wires for it, and jumper, but whats the sequence for plugging it in, and what to press, do i have the power on? etc etc. Ive looked at clark website (and know i have to press the sleep button - But the instructions from there are crap) If you could just gimme some steps 1,2,3 ....and so on, that would be awesome!! Mate thx so much, your online pal, Andy-UK.
what cable did you stick into the hiding switch from? the one that other usually use a jumper. i dont hv a jumper.
hi i have a HL Challenger 2 v5.3 i want to switch over to Tk22 board. so do i need to get a new gun elevation and recoil gun for IR battle?
I like your videos because are really helpful,
I have saved a lot off them for help reference,
Can you show the hull reforcement you did on your tiger it looks
Very interesting as well thanks
Is it possible to put a small cooling fan on top of the heatsink??
Yeah as long as there is somewhere to power it from
Hi man,
How things, are you going to make that vid of the clark TK-22 and the TBS mini?
the the reason I am asking because I have this system and I do not want to
Fry it, I had another system for a tank and through my overconfident stupidity
I blow the lot, I supposed I deserved it,anyway i never take that chance
Like that unless i 100% know what I am doing, so please please do this
I need help. So thank you will you let me know when it is ready
Hey Peter, I am uploading one right now mate.
RC Tanks 24/7 hi where is the new vid thanks peter
Check out my latest uploads
So if I was going to add a gun recoil system and a flash for the gun, how would I do that?
Hi do you know how the smoker works?
I seen it needs a switch too.
you have to turn it on by the switch everytime to work?
do you know if the smoke is connected to the motor speed too?ty
dragon model yep you need a switch. For proportional smoke control you need to connect it to the motor wires so it matches the speed.
RC Tanks 24/7 hi thanks again damn that sound like more work for proportional control.wouldnt know for sure how to do that.thank you again.
hello steve, could you do a video of this, just on your Taigen Panther? I want to know if the installation is different depending on if the tank is henglong or taigen
They are the same. Very similar
Is it a computer board or those boards similar to radio and tape recorder
Dunno mate
Hi I was wondering if the Clark board is 100% plug and play for a Pershing . Also do you need a gun flash port, or is that a option?
Black hawk gameing yep as long as it is a Heng Long tank. You don't need a flash it just ads to the realism.
Hi ok,
Why have you not a guide on how to wire the clark 22 and the tbs mini
I have yet to find one? You have shown how to wire the clark why not the
Tbs mini is it top secret or thingthing ha ha please will you do this thanks
Hey Peter, I see what I can do. Thanks
Thanks man that great
I'm thinking of swapping just the speaker in my Heng Long KV-1. If I just change the speaker, will it change all the engine sounds or do I need a full new circuit board and speaker?
You need to get another board. Changing to another speaker will only improve the quality
RC Tanks & Trucks 24/7 Ah right, OK.
Another thing: I have a heng long KV-1 ehkranami, was thinking about putting a KV-2 turret on it. Will it just be a simple swap or will I need to do other things?
KV-2 turret comes with the bb gun stuff and all the wires. Theoretically, I only have to swap the turret ring?
Any suggestions?
If the diameter of the turret ring are the same you won't need to change it. Should be just a swap.
From memory the KV2 turret is much larger but the gear ring on all heng long RC Tanks are the same.
RC Tanks & Trucks 24/7 Thanks for that, I believe the ring is the same.
I'll post some pictures of it during the stages. Really helped me that :)
Do you know how to install and configure a fly sky fs t6 transmitter and receiver using a clark tk 22 and tk24 board? Thanks
+Michael Smentkowski sorry man, not sure. I have only used the turnigy 9x
Also does it work for a bb shooting tank?
Black hawk gameing yep, sure does. Thanks for watching
is it neccessary to use the tv remote to config the board and if yes how is it done
+lam justin yep, you need the remote plus an infra-red unit that plugs into the Clark board. This is needed so they can talk to each other.
+RC Tanks & Trucks 24/7 how abt if i dont plan for any infra red, just an led
+lam justin no the infra-red is for the remote control to communicate with the Clark board to make changes. Nothing to do with battling with other tank's.
Did you say the last one is elevation? I thought the middle was elevation
I understand that by installing this module, you have to use a new receiver and transmitter. the original receiver heng long does not work. true?
the original receiver has integrated the sound module?
How many channels should the new station have? Thank you
Yes, you need 4 channel transmitter.
@@MichalKaczorowski thanks!
Hi
You send message saying you uploaded the new vid of the clark TK 22 and tbs mini
On how to connect them or wire them, where's the video?
Thanks
This is the link th-cam.com/video/_34ezvo6-Js/w-d-xo.html
That motor plug can not handle enough current for red390 motor 🤔 same with battery. These motors suppose to be 20a motors each.. and have bullet connector.
Also going to use ELRS sbus setup.
Thanks for watching mate 👍
howfar it can be if tk22 with2.4 ghz?
Not exactly sure but far enough that you cannot see it :)
Because my tank has all the controls, on the contrary, it is when it goes on and off by itself
Hi everybody I got a mato tiger 1 and the sound has just stopped working.anybody have any ideas.the tank is a ready to run out the box everything elce works fine
Battery or control board. Have you tried another battery?
Why are my comments disappearing
Could the problem be with the transmitter
Oh.. Nevermind haha its in the video.
+andrew lasek haha, no worries :)
Cool though
Cheers