Instead of keeping the mesh to dry, to save up time in making work faster, you can dry it up with gas... Actually watching this make me remember when i still dey learn work 🤗
You are always welcome... Don't forget to subscribe to my channel and if you already subscribed do well to help share the video to your friends someone might need the information. ❤️❤️
I just subcribe to your channel today and i like what am seeing but my question is after using that artwork and you want to change another artwork on your mesh are you going to coat and expose to the again
What is the name of the paper you putted to expose to screen and what printer it was printed on, and what is the name of liquid you put on that paper before exposing it to sun.....😀😀😀
Hiii Thank you so much for this video❤❤❤ I tried this, i put the mesh under sun for 1 minute (the sun is not hot at all oo, around 5-6pm sun) but when i started pouring water, the artwork started coming then i used my hand to wash it just like you've done in this video, and i Continue pouring water and using my hand, not until i realized that the artwork had been ruined😢 The unexposed part is also removing instead of the black part alone😢 E pain me o😢 What can I do to avoid this next time sir? Thank you so much and i await your response
Well since you are shooting during evening time you can leave to for as long as 10 minutes since the ray of sunlight is not really much during that time. Sorry about the experience it happens even to pro so just try again until you get the timing right
When shooting in daylight and you have a steady sunlight 15-30 seconds is enough for you to expose your mesh. But if the sunlight is not much maybe during evening time like 5-6pm you can leave it for up to 3-5 minutes before washing up.
And for the mixture of your sensitizer and emulsion. Half teaspoon of sensitizer is enough to mix emulsion of that container size you can see in the video... You just need a little of it in your emulsion.
@@vlvtdefiinvestment am In ewekoro though but am based in Ibadan the price for a yard of mesh should be around 4k now... And you can get nylon ink for as low as 500 naira
@@emperorprints I followed your other video so I realize using hand dryer make emission weak following your teaching I was able to print How can I show you my work sir? But I have issue with washing no matter how I wash the work I expose will not erase despite my mesh been cleaned
You're the best I've seen so far. Been watching too many clueless videos but yours got a lot of value
You are the best!
Your tutorials are so helpful.
I'm a textile student and they don't teach this in school lol. Thank you so much.
@@chidinmakaluanya1386 Thanks.... If I may ask which school are you....
And don't forget to subscribe 😜
Instead of keeping the mesh to dry, to save up time in making work faster, you can dry it up with gas...
Actually watching this make me remember when i still dey learn work 🤗
Thanks and God bless you more
I have seen for the first time and admired to learn how to make it but don't know if it's possible😢
This guy is amazing..... He knows how to teach and explain things.
Thanks so much bro... I celebrate you.
I swear I understood his own well
@@emperorprintslemme follow your page immediately thank you sir
Dis really helpful thanks
Thanks for this video..God bless you
Thanks for being supportive.... I celebrate you... I hope you learn something new. And do well to ask any question if you have one.
Thanks teach! Good job!
Waooow ❤great,great teacher
@@RosemondNsowah thanks
This guy is one of the best
Am honored sir.. thanks
You're amazing at teaching .
Thanks so much.. am glad you are able to learn something
Do you have a physical class incase someone wants to enroll .
@@onohworuapeace3123 it depends on your location
thanks alot grateful
You are always welcome... Don't forget to subscribe to my channel and if you already subscribed do well to help share the video to your friends someone might need the information. ❤️❤️
Thanks God bless y
Bless you too ma'am
Pls have try 3times not is not exposing on my mesh pls what could be the problem sir
Trying to wash my mesh after exposing my artwork didn’t come out very well
@@belloalameen7291 maybe you didn't get the timing right
Pls what type of printing was done on the papper?
Thank you boss for this, pls do i need glass for exposing?
@@zionteddesigns you don't what matters is ensure your artwork is properly laid on your screen that's all
I just subcribe to your channel today and i like what am seeing but my question is after using that artwork and you want to change another artwork on your mesh are you going to coat and expose to the again
You will have to wash away the previous art work on your mesh and coat it again for you to be able to expose your new art work
Thank you for the video. Is there a proportion for mixing the emulsion amd activator.
Pls my brother my mesh Is not printing properly
There might be an error while you are exposing your mesh and you didn't expose well. Or your ink might have caused blockage
I love your explanation so i subscribe immediately how will i make money from it
@@osasahtope1329 Thanks for subscribing.
You make money from it my rendering the service
Plz where can I fine the emotion and what is that liquid u add
Please look for a screen printing store around you and tell them you want to buy emulsion... What i missed with it is called sensitizer
Please each time i print it doesn't come out very well am a new beginner and i used water base ink.please what is the course.
I think the problem is with your stencil.. probably you did not expose it well
I am having issues mixing my emulsion with the dichromate
Check my video on how to mix your emulsion
What is the name of the paper you putted to expose to screen and what printer it was printed on, and what is the name of liquid you put on that paper before exposing it to sun.....😀😀😀
What's the best dimensions for a homemade mesh frame for a beginner?
18 inches by 13 inches sir.. you can start with that . Kindly see my video on what you need for screen printing
Thank you so much for this, please how can I wash out the art work from the mesh after printing
Please watch my video on how to clean your mesh after printing
th-cam.com/video/oW4rdOoc8rk/w-d-xo.html
That's is the link to the video
Alright
Thank you so much
@@vivivankelechi9606 welcome Vivian
God bless you,
Please where can I get this materials
Try and locate any screen printing shop around you
God day Boss, please where can I buy nylon
Depends on your location... Just go to market and make enquiries about where they seek nylon
I just subscribed to your channel
Thanks for that you are really appreciated
Hiii
Thank you so much for this video❤❤❤
I tried this, i put the mesh under sun for 1 minute (the sun is not hot at all oo, around 5-6pm sun) but when i started pouring water, the artwork started coming then i used my hand to wash it just like you've done in this video, and i Continue pouring water and using my hand, not until i realized that the artwork had been ruined😢
The unexposed part is also removing instead of the black part alone😢
E pain me o😢
What can I do to avoid this next time sir?
Thank you so much and i await your response
And just to let you know sir, I used vegetable oil instead of kerosene
Well since you are shooting during evening time you can leave to for as long as 10 minutes since the ray of sunlight is not really much during that time. Sorry about the experience it happens even to pro so just try again until you get the timing right
@@emperorprints wow! 10 minutes?.... Alrightttttt!
I'll try that sirrr.
Thank youuuuu so much 🤍🤍🤍
Good day, Please what is the name of the paper you used gor the art work, that is the paper you poured kerosene.
A4 paper
Sir pls how many minutes was it in the sun and how do i know the amount of sancitizer and emulsion to mix together
When shooting in daylight and you have a steady sunlight 15-30 seconds is enough for you to expose your mesh.
But if the sunlight is not much maybe during evening time like 5-6pm you can leave it for up to 3-5 minutes before washing up.
And for the mixture of your sensitizer and emulsion. Half teaspoon of sensitizer is enough to mix emulsion of that container size you can see in the video...
You just need a little of it in your emulsion.
@@emperorprints thank you very much
@@agirichristiana4107 You are welcome
Please what if the sensitizer is much in the emulsion what can happen?
If u expose it to sun lkight where does the paper go ..i don't understand
You will remove the paper and keep it one side
Kudos boss , well explanatory
Thank you for the video 🙏 just came across you and have subscribe ❤ please how much can I get 1yard of fine mesh🙏🙏🙏🙏🙏 and the ink
It depends on your location sir
@@emperorprints please tell me your own location and the price🙏🙏 I’m a female and I stay in abeokuta
@@vlvtdefiinvestment am In ewekoro though but am based in Ibadan the price for a yard of mesh should be around 4k now... And you can get nylon ink for as low as 500 naira
@@emperorprints Thank you so much❤️ God bless and reward you for us🙏🙏
Where can I get all this materials in Ibadan?
@@olutekunbiolutekunbi6033 You can get at Mokola and Odutola along Molete ibadan
I mean where to buy screen prints chemicals and mesh
Do we need to add any thing at the back of the mesh when exposing?
not necessary
Please how do i get the mesh ?
Try and locate any screen printing shop around you
I just subscribed
Thanks for subscribering
Thanks for the video, after exposing the mesh, so we will have to remove the artwork before washing it out?
Yes ... Remove your art work and start washing
Plz sir can I print with this method on fabric material
Yes, sure
Hello bro,like how many minutes or hour to expose on the sun
When exposing under sun 30 sec to 1 minute is okay to expose your mesh
Where did the paper go
It didn't go anywhere 😂 I only keep it one side... Cz it is still reusable if you are still shooting same work some other time
Ok
Pls sir my emission is washing off exposing while washing
Maybe you didn't allow it dry well before exposing
@@emperorprints I did allow it to dry but I want to ask can too much sentitizer cause it
@@emperorprints I followed your other video so I realize using hand dryer make emission weak following your teaching I was able to print
How can I show you my work sir?
But I have issue with washing no matter how I wash the work I expose will not erase despite my mesh been cleaned
@@isholanajeebatadedoyin5517 you can reach me on Whatsapp via 09136295918
@@isholanajeebatadedoyin5517 yes oo the Sensitizer should not be too much
Please what kind of paper is the artwork made from. Can it be done by ordinary computer printer
It's just the normal office paper
Love you teachings
Am I suppose to remove the art work paper before pouring water or will the paper peel off by itself
You will remove the paper
@@emperorprints thank you very much
How long does the exposure has to take under the sun please!
1 - 2 minutes
What type of paper did you use for your art work? Is it a normal plain paper?
@@petronellachisanga1194 yes
What type of mesh do i need for screen printing on nylon
You need a closed mesh for nylon printing.
You can check my video on what you need for screen printing. Thanks
@@emperorprints thanks so much, what could be the cause for design coming out faintly after exposing the mesh
@@MARYBLESSOWAN two things it either your design print out is not on 100% black or you did not expose your mesh well
How do i get mesh and other chemicals to buy? Within ibafo, mowe or lagos? Thanks
@@osagioduwa7osarenren334 I can't say because am not based in lagos but I can help you get here in ibadan and waybill to lagos if you don't mind