Its rainy season and all i can get is jjst daylight not sunlight Pls how long should I leave my mesh outside (exposing) before washing to show my Design I understand 1 min is enough under direct sunlight Pls how long for just daylight
After exposing your mesh allow it dry and observe your screen well to avoid some free holes... If you see any hole on your screen that is not part of your design do well to block it with emulsion.. allow it dry then you can start printing
Pls my first question is after coating my mesh with emulsion in a dark room I took it outside the sun for it to dry Wen the mesh was dry i bring it inside and place my art work with kerosene i brought it outside for 3 minutes then remove the art and started washing my mesh with foam and water but the art work was small i can't see i did it for 15 minutes but nothing show after watching I want to know wat would be the cost
Its rainy season and all i can get is jjst daylight not sunlight
Pls how long should I leave my mesh outside (exposing) before washing to show my Design
I understand 1 min is enough under direct sunlight
Pls how long for just daylight
What is emotion bro can i use anther material
It Emulsion... Not emotion..
Emulsion is a chemical used for coating your screen.
What's the best way to avoid this linkage on the mesh, that's my major challenge, have tried more than 6 designs but its still spilling over my design
After exposing your mesh allow it dry and observe your screen well to avoid some free holes... If you see any hole on your screen that is not part of your design do well to block it with emulsion.. allow it dry then you can start printing
Pls my first question is after coating my mesh with emulsion in a dark room
I took it outside the sun for it to dry
Wen the mesh was dry i bring it inside and place my art work with kerosene i brought it outside for 3 minutes then remove the art and started washing my mesh with foam and water but the art work was small i can't see i did it for 15 minutes but nothing show after watching
I want to know wat would be the cost
You don't sun dry coated mesh. You let it dry naturally.. and you must ensure it's away from sunlight or any form of light
Can I apply emotion at night and expose to sun the following day?
Yes sir you can.
My art was exposed but not clear, so i tried to run it under a running tap, the whole art work washed away
Kindly try again.... The pressure from the tap is probably much than what your emulsion can withstand.. that is why it wash off
@@emperorprints please is there any effect if it stays 10mins instead of 5mins under the sun
The exposure seems very difficult, it's not showing I used vegetable oil
Expose is not difficult you probably don't get your timing right
Still try again
@@emperorprints ok thanks
PLEASE WHAT TYPE OF SHOP DO THEY SELL MESH
Locate any screen printing shop around you sir you will get all you need there