Hi can you do a video on minimising the gauges as it covers the whole screen? If i click on minimise? Its not readable! Any reply appreciated cheers from Australia
When you hit stop recording button a window should pop up and you need to name the file and point to where you are saving it. It can take some time depending on your hardware.
@@E.T.GARAGE this is the message I got from my chip guy, I don't know how to do this. "You need to open that XDL file back up in your tunerpro and under data acquisition menu at top, export that file to a CSV excel file and send that file to me."
I would go to one of the links above in the description box, some one on those forums should be able to help. You should be able to create a new dashboard.
Eugene, I did everything on the video. I click on send and the tool bar says DA connecting. When I plug it into the ca. It continues to say DA connecting. I pulled the cable in and out a couple of times no change any ideas. 1985 Corvette 4 plus 3. Thank you
@@E.T.GARAGE thank you for getting back to me. The switch is set to 10 Omega. I can't see a tab that says baud rate.. interface type has use plug in and autoprom maftpro. I am using use plug in. Should I use the other. Plug in configuration has enable dual emulator 16 bit and use high speed USB. I have high speed clicked. Thank you so much for the help
@@E.T.GARAGE Eugene this is the ECM and files I am using on my 1985 4 plus 3 Corvette The ECM, and chip I got from Scott Hansen it, is number 1226870 The files I am using are HLP 85 vette 5.7TPI 6 speed doug nash.bin 1F.xdf a20.adx I was watching a TPRT video where the person uses a 1989 Cadillac. He is able to fill the dashboard boxes with labels TPS, cTS, idle . I could not do that the boxes appear but I cannot get the drop down with the labels. Thank you for the help.
Great help...finally someone puts this stuff in plain English. Thank you.
Glad it was Helpful
Very use full though I've used Tuner Pro before. Unfortunately I have had a lot of data corruption and finally gave up.
Thanks so much for the video. Once I get a handle on this ill post a video back. Thanks again Scott
Hi can you do a video on minimising the gauges as it covers the whole screen? If i click on minimise? Its not readable! Any reply appreciated cheers from Australia
When I need to reduce the gauge screen I just drag it down with the courser, thats the only thing I can think of to help you.
I'll try that. Because the bottom section is almost unreadable. ( crammed) . Thanks heaps for the quick reply
If anyone has questions comment below, Links are in the video description box click read more to show all the links and please subscribe.
So if I want to change parametrs (for an egr delete, for example), that counts as burning a new chip? Didnt manage to fully understand it
In order to make any changes in the program in your ecm you will need to burn a new Chip or use a emulator, depending on the year, make, and model.
Ok, many thanks!
Do you still have the files from this video for a 92 LT1 Automatic?
I should, I downloaded them from the internet www.gearhead-efi.com/Fuel-Injection/forum.php
after I record I can't find or save the file
When you hit stop recording button a window should pop up and you need to name the file and point to where you are saving it. It can take some time depending on your hardware.
@@E.T.GARAGE this is the message I got from my chip guy, I don't know how to do this. "You need to open that XDL file back up in your tunerpro and under data acquisition menu at top, export that file to a CSV excel file and send that file to me."
I think I figured it out
How to ADX??
What do you mean how to ADX
I accidentally deleted the dashboard. Now I cant open up a new dashboard. 😩
I would go to one of the links above in the description box, some one on those forums should be able to help. You should be able to create a new dashboard.
Thanks for the help!!!!!
Happy to help!
@@E.T.GARAGE I'm not very computer savvy and your video was far and away the best and easiest to understand of all those I watched
Thanks for the video. It is very helpful
Eugene, I did everything on the video. I click on send and the tool bar says DA connecting. When I plug it into the ca. It continues to say DA connecting. I pulled the cable in and out a couple of times no change any ideas. 1985 Corvette 4 plus 3. Thank you
on your aldl cable do what buad rate do you have it set to, I beleive the 85 you need to set to the lower baud rate.
@@E.T.GARAGE thank you for getting back to me. The switch is set to 10 Omega. I can't see a tab that says baud rate.. interface type has use plug in and autoprom maftpro. I am using use plug in. Should I use the other. Plug in configuration has enable dual emulator 16 bit and use high speed USB. I have high speed clicked. Thank you so much for the help
@@E.T.GARAGE Eugene this is the ECM and files I am using on my 1985 4 plus 3 Corvette
The ECM, and chip I got from Scott Hansen it, is number 1226870
The files I am using are
HLP 85 vette 5.7TPI 6 speed doug nash.bin
1F.xdf
a20.adx
I was watching a TPRT video where the person uses a 1989 Cadillac. He is able to fill the dashboard boxes with labels TPS, cTS, idle . I could not do that the boxes appear but I cannot get the drop down with the labels. Thank you for the help.
@@josephseremba8256 you should have a setting for 160 baud rate normal a jumper of some kind