2.0t Audi ENGINE REMOVAL removing the 2.0t tfsi a4 a5 q5

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 130

  • @NaptownTuner
    @NaptownTuner  4 ปีที่แล้ว +28

    I’m in Indianapolis and travel FAR.
    Many states away for the right cars/ deals.
    I want to buy your 2.0t 2009+ a4 a5 a6 q5 that has a failed engine for any reason. If you want to keep it and fix it I could travel to you and fix it mobile mechanic style to help my career/ TH-cam gig. NaptownTuner@yahoo.com
    If I don’t reply soon hit me up on here then I’ll check back at the email thanks

    • @Yordany617
      @Yordany617 3 ปีที่แล้ว

      Please check your email, I just sent you a request for a fix. I am willing to travel also, let me know!

    • @gmoney5579
      @gmoney5579 3 ปีที่แล้ว

      Hey bro just sent a email to you in hopes you could help me🙏🏽

    • @STRGabby
      @STRGabby 3 ปีที่แล้ว +1

      Help me out !
      I have CDN engine 2.0 tfsi b8 2010 with the same problem . I found a 2015 CDN 90k km engine . Dose it fit ? Needs cooding ?
      I`m not in the USA cuz i def come to you to fix it .
      Love your stuff great job .

    • @franciscomohamed4095
      @franciscomohamed4095 3 ปีที่แล้ว

      Instablaster...

    • @jacobsheffield-financethri3783
      @jacobsheffield-financethri3783 3 ปีที่แล้ว

      I just sent you an email.

  • @fiily1
    @fiily1 2 ปีที่แล้ว +4

    Love NaptownTuner, just did a b8 A5 master cylinder with his instructions, didn't take the firewall/plenum out, just removed what I needed and zipped the new one on. Thank you brother, Jesus loves you!

  • @ajchomicz
    @ajchomicz ปีที่แล้ว +2

    Life long domestic backyard mechanic here and greatly appreciate these vids! The last couple years I've ventured toward Audi and love em. My godson blew up his A5 2.0T and I told him I'd help replace with a junkyard unit. It's been a challenge but these vids helped in a huge way prior to tackling the job, thanks! And WTF is up with that starter wire!? Holy stupid!

  • @adeelahmed1319
    @adeelahmed1319 ปีที่แล้ว +6

    Holding the other hand with the camera. Man's talented. Subscribed.

  • @JoaoSantos-vb7bv
    @JoaoSantos-vb7bv ปีที่แล้ว +2

    Thanks for the nice tips
    I m a 30 years experience mechanic
    But your tips made much easier
    I got a brand new engine
    From the dealer
    This a4 runs great now
    No mor adding oil every 400 hundred
    Miles
    Thanks again

  • @hubbunchdd6035
    @hubbunchdd6035 ปีที่แล้ว +2

    Can't say thank you enough for making my life so much easier with this walk thru. Something I planned to do on my own and decided to check youtube before starting and found the man Naptown. Job has gone so much quicker and easier, and not a dull moment from Naptown which seems to help retain the instruction. Thx!

  • @semperfly
    @semperfly 4 ปีที่แล้ว +4

    Great commentary! I appreciate the sarcasm, humor and how you break down each step. Too many “how to” videos gloss over steps that are routine to a professional mechanic and not so routine to the rest of us. I’ve got the 2.0 in my ‘08 A4 and ‘14 Q5 and can see this job in my future. Someone needs to send you a GoPro to strap on your head to cut down on your one handed carnival tricks.

  • @gonefishin3620
    @gonefishin3620 4 ปีที่แล้ว +8

    I've been waiting for a video like this since 2014. Thank you for this educational and tutorial video. I will be pulling my engine and I will be replacing the piston and piston rings.

    • @storken756
      @storken756 4 ปีที่แล้ว +1

      yeah im doing it too in a few days. First time for me to do something that big on a car :D

  • @butchtherhino8202
    @butchtherhino8202 ปีที่แล้ว

    My sons and I just completed an engine removal and replacement install on my sons 2013 A4 Quattro - your videos and info came in very handy (had to remove head on original engine to get piston parts out to turn engine to access flywheel bolts UGH)... not sure I would have attempted it without your information a BIG THANK YOU!

  • @josehiginiocastrolopez6558
    @josehiginiocastrolopez6558 3 ปีที่แล้ว +1

    I'm in the San Francisco Bay Area, and I had the opportunity to do a job on a 2010 Audi A4 TSFI, and your engine removal advice really served me well. Thanks to videos like the ones you do, one can better guide oneself when carrying out work!

  • @SpudGuns
    @SpudGuns 2 ปีที่แล้ว

    I just finished a piston job on my A4. The removal videos were a huge help! Followed them and everything worked great. There is a hole in the aluminum engine cradle to give you access to the back A/C compressor bolt FYI. Big thanks to NaptownTuner for putting these videos together!

  • @edadelman2077
    @edadelman2077 ปีที่แล้ว +1

    This series was great. I pulled the 2.0TFSI without much issue from my A4. I now want to pull 3.2FSI from my Q5 but can’t find any videos. Is it much different?

  • @Joselopez-eo5br
    @Joselopez-eo5br 4 ปีที่แล้ว

    Just want to say thanks for the walk through on how to remove the engine from a b8 A4 . Your video save me a lot of time and hustle.

  • @edadelman2077
    @edadelman2077 ปีที่แล้ว +1

    Can you also pull the 3.2 engine from a Q5 without putting it in service position?

  • @Temporary-nd5tb
    @Temporary-nd5tb 2 ปีที่แล้ว

    So I finished the piston rebuild today on my 2015 Audi Q5, thanks to Naptown Tuner’s videos. It took a lot longer than I thought. She started up, ran for 10 seconds then started smoking, now the car won’t start…I really hope I didn’t just destroy all of that work.

    • @Temporary-nd5tb
      @Temporary-nd5tb 2 ปีที่แล้ว

      Gave it a little gas and kept trying and it started up again, the smoke was caused by an oil leak…I forgot to torque down the vacuum pump bolts!
      @NaptownTuner - a reassembly video would be really helpful, there were several cases where I’d go to put something back and realize that I route things wrong, had to disassemble things, then resemble the right way.

  • @NaptownTuner
    @NaptownTuner  4 ปีที่แล้ว +1

    Part 3 drops when I get to 100 subscribers

  • @WazzysWheels
    @WazzysWheels 2 ปีที่แล้ว

    Thank you for this info
    Working on getting my 2006 A4 S-line 2.0t engine out

  • @HappyGaming-wh8rj
    @HappyGaming-wh8rj 4 หลายเดือนก่อน

    How do i remove the flexplate bolts if the motor is locked up ?? Thanks you your videos are really helpful .

  • @rdprdputube
    @rdprdputube ปีที่แล้ว

    You’re an animal, and hella amusing. I get a great laugh all the way through. You are very thorough, everything is explained. I regret that I’m having to work on this damn thing. Told my wife and son, get a Toyota or Honda. Thank you very much. You give me confidence to get through this awful job, lol.

  • @juddmarshall1169
    @juddmarshall1169 หลายเดือนก่อน

    I’ve appreciated your posts and educational videos! The engine in my ‘13 q5 is bad. Do you have an opinion on the “best year” 2.0t to look for to swap?

  • @EXOVCDS
    @EXOVCDS 4 ปีที่แล้ว +1

    Eye protection... check! Good play-by-play directions!

  • @KevinBello-u6t
    @KevinBello-u6t 3 หลายเดือนก่อน

    @naptownTuner hey hopefully you can help. I rebuild my engine with your video but I can't remember where the positive wire coming from the starter goes connected to. Any ideas ??

  • @tonylovekimberly
    @tonylovekimberly 9 หลายเดือนก่อน

    Are the bolts from the crank shaft caps reusable when installing new main bearings

  • @liquidsteel
    @liquidsteel 10 หลายเดือนก่อน

    Is the removal process the exact same if it were a 6 speed manual??? Or does the front clip have to be removed ?

  • @deans178
    @deans178 2 ปีที่แล้ว

    my daughters 2011 A4 Turbo had the timing chain jump. The Audi dealer said the valves bent & they hit the top of the piston so it needs overhaul or a new engine. I'm a decent backyard mechanic. I'd like to rebuild it myself. What are your thoughts?

  • @GalaxyAlex
    @GalaxyAlex 4 ปีที่แล้ว +1

    Excellent video!! Picking up a B8 A5 2.0T with jumped timing this week. Is it worth repairing the timing in terms of money and time myself or dropping a whole new engine in?

  • @franciscocontreras9417
    @franciscocontreras9417 2 ปีที่แล้ว

    I want to do a timing chain replacement on a 2010 A4 quattro. I have never done a job like this. Do I need to take the engine out to do the timing or can it be done with the engine on

  • @Mostafizur_rahman188
    @Mostafizur_rahman188 3 ปีที่แล้ว +1

    Thinking of doing an engine swap on my 2009 audi a4 b8 2.0T quattro. Any suggestions, advice?

    • @londonps6751
      @londonps6751 3 ปีที่แล้ว

      Same, kinda wanna put the 3.0 in

  • @sipthewater
    @sipthewater 3 ปีที่แล้ว

    Coolest professional I've ever had the pleasure to watch. Wow.

  • @marcellobarr1659
    @marcellobarr1659 6 หลายเดือนก่อน

    Best tutorial on youtube, Thanks! Subscribed. Question, i have A6 Multitronic 01J. Do i need to remove bolts of torque converter? I believe multitronic CvT does not have a converter? Keep up the good work! 🎉

  • @my2blue
    @my2blue 2 ปีที่แล้ว

    Hello. I just want you to know that your video is very informative. Great job! I have a question though. Is it possible to put a supercharge engine to a 2010 audi a4, let say from 2011 s4?

  • @llcooljuan7998
    @llcooljuan7998 2 ปีที่แล้ว

    Would you be able to tell me if the process would be the same on a 2007 A4 with the 2.0?

  • @MrButterz48
    @MrButterz48 2 ปีที่แล้ว

    @naptowntuner would you personally recommend the 2.0t in the Q5 2013 or the 3.2 v6 in a 2012?

  • @VtwinKevin82
    @VtwinKevin82 4 หลายเดือนก่อน

    Where abouts are you located. You need any side work?

  • @imremarks6688
    @imremarks6688 2 ปีที่แล้ว

    would this be similar for a b7 a4 this is the only good video I could find for pulling an engine

  • @ronnyjohnson365
    @ronnyjohnson365 2 ปีที่แล้ว

    Hey NaptownTuner. I’m doing my own research I’ve found that the a4 engine is the same as the TT engine, but the TT is transverse. Do you know if they are interchangeable as far as mounting goes?

  • @jonathonburnett7292
    @jonathonburnett7292 4 ปีที่แล้ว

    I was looking at buying 2010 Audi A4 platinum Quattro, had oil on a hose lower section closest to radiator likely hood it’s oil or transmission fluid? Viewpoint looking down with flashlight thru hood hatch/radiator area and online manuals say it’s a coolant hose? Should I be concerned about this before purchase/expensive fix, your thoughts?

  • @bezerkgaming7763
    @bezerkgaming7763 ปีที่แล้ว

    What if your engine is seized and you can’t spin the pulley using the 24mm socket to spin the torque converter to get the 3 bolts

  • @johnnybarrientos9724
    @johnnybarrientos9724 2 ปีที่แล้ว

    Hey is this process the same for the Quattro and FWD models?

  • @rickyvanweston2567
    @rickyvanweston2567 3 ปีที่แล้ว

    Do you need to remove the torque converter bolts when its a 6 speed or will the engine break free with them still attached?

  • @imremarks6688
    @imremarks6688 2 ปีที่แล้ว

    is this process similar to a b7 a4 this is the only good video i can find for pulling an engine

  • @amostodd7844
    @amostodd7844 3 ปีที่แล้ว

    Hey I got a 2006 avant with tip trans.im putting a manual trans engine in it.the manual crank needs a custom bushing to receive tip trans input shaft.do u know a vendor that makes this little gem?
    Btw your invaluable

  • @amymaxwell815
    @amymaxwell815 3 ปีที่แล้ว

    Your video set for engine removal was awsome, very helpful. I bought a 2010 A4 with jumped time, all intake valves wiped out. I thought to do an engine out survey like you did but have been having second thoughts about just sneaking the head off and rebuilding it and then redoing the timing components...Any thoughts?

  • @justin6584
    @justin6584 3 ปีที่แล้ว

    Do you happen to have the part number of the cover you removed at 24:43 ?

  • @NYCB905
    @NYCB905 ปีที่แล้ว

    What size are the bell housing bolts

  • @anoncanon1100
    @anoncanon1100 3 ปีที่แล้ว

    Question are you using a bar to keep the engine up? Cuz im wondering why the engine didnt drop when u removed the mount bolts

  • @briantitus2737
    @briantitus2737 4 ปีที่แล้ว +2

    Another great video! Thanks

  • @rexeer1815
    @rexeer1815 4 ปีที่แล้ว +1

    Noticed the exhaust system was already removed....would like to have seen that. Exhausts have always been too stubborn for me.

    • @NaptownTuner
      @NaptownTuner  4 ปีที่แล้ว +1

      That’s in part 2

    • @angeldelvillar9028
      @angeldelvillar9028 4 ปีที่แล้ว

      @@NaptownTuner send me your email address thank you

  • @jaezoeofficial
    @jaezoeofficial 4 ปีที่แล้ว

    Can you do an engine removal for A4 B7? This platform is much loved and needs more info on DYI

    • @NaptownTuner
      @NaptownTuner  4 ปีที่แล้ว

      Eventually I might get into other audis, I’m not really a fan of the b7 though so it would have to be for someone else. I’d probably do 3.0t stuff next but I’m doing a 1.8t Passat clutch next week so that’s very similar

    • @jaezoeofficial
      @jaezoeofficial 4 ปีที่แล้ว

      @@NaptownTuner Im surprised to see that you don’t like this platform.. any particular reason?

  • @margaretoddo3202
    @margaretoddo3202 2 ปีที่แล้ว

    so how long did this take??

  • @WreckitRalph-fl3kz
    @WreckitRalph-fl3kz 6 หลายเดือนก่อน

    Do you know if I can swap a s4 b8 into a a4 b8 Quattro ?

  • @blizteredthumbs7911
    @blizteredthumbs7911 ปีที่แล้ว

    Extremely appreciated!! ❤️❤️❤️

  • @jonahk130
    @jonahk130 ปีที่แล้ว

    Dude, thank you. You're a legend!!!!!

  • @davidsalvemini3145
    @davidsalvemini3145 4 ปีที่แล้ว

    I Have the A5 with 6 speed manual gearbox. Can I still get the motor out without the bumper removal?

    • @NaptownTuner
      @NaptownTuner  4 ปีที่แล้ว

      Yes but the snout on the flex plate extends a little further, need the load leveler for sure and a pry bar when installing

  • @fredericklai3523
    @fredericklai3523 4 ปีที่แล้ว

    @naptowntuner When you remove an engine using this method, on an average day, how long would you estimate that it takes you to get it out?

    • @fredericklai3523
      @fredericklai3523 4 ปีที่แล้ว

      Found my answer: under 1hr!!! Wow. th-cam.com/video/fTUraB21HEQ/w-d-xo.html

  • @kristineblethyn1909
    @kristineblethyn1909 3 ปีที่แล้ว

    Haven't followed you since your fasting episodes.How are you?Do you mostly do 2.0T Audis or have you done any 3.2 V6 videos?Hope you are well!!

  • @CarsandCoding
    @CarsandCoding 4 ปีที่แล้ว

    Wow you are the Audi A4 B8 expert! Amazing! What was the reason to pull the engine in this one?

    • @NaptownTuner
      @NaptownTuner  4 ปีที่แล้ว

      I’ll refresh the engine and reinstall as the channel gains momentum I’ll do a lot more

    • @BryanMeadows011235
      @BryanMeadows011235 4 ปีที่แล้ว +1

      I've got a piston job for you, are you close to California?

  • @LoganChap-j5h
    @LoganChap-j5h 9 หลายเดือนก่อน

    What’s the tools I need need

  • @R3dRuM839
    @R3dRuM839 3 ปีที่แล้ว

    @NaptownTuner Bro what is the Make of your Ratchet. Just by the sound you Can tell that is quality :D

  • @stevespeliers3551
    @stevespeliers3551 3 ปีที่แล้ว

    At the moment i'm busy with a motorswap of an Audi a5 2.0 tfsi 2.0tfsi. Going well at the moment with youre tips 😀

    • @corbykissler
      @corbykissler 2 ปีที่แล้ว

      what was the reason for the swap?

    • @stevespeliers9876
      @stevespeliers9876 2 ปีที่แล้ว

      @@corbykissler oil use 😌

    • @corbykissler
      @corbykissler 2 ปีที่แล้ว

      @@stevespeliers9876 that sucks - I bought a used a5 with 38k - piston 1 just started slapping the head … guess I got a good two months out of it…

  • @MaGiiCxSkull
    @MaGiiCxSkull 3 ปีที่แล้ว

    Hey you guys think I can put a 2014 2.0 on a 2011 Audi A5 ,

  • @rashadrunyon3230
    @rashadrunyon3230 ปีที่แล้ว

    I need ur help or want to pay u too fix my Audi A5 2010 2.0 oil issues

  • @clarenceharwood7894
    @clarenceharwood7894 4 ปีที่แล้ว

    how can i do this with the torque converter still attached to the froze engine

    • @NaptownTuner
      @NaptownTuner  4 ปีที่แล้ว

      Sometimes you gotta take the head off sometimes you gotta actually brake the upper oil pan in pieces and adjust the broken rod with a hammer

  • @wtrammell405
    @wtrammell405 ปีที่แล้ว

    Great video sir !!!!!

  • @iBran137
    @iBran137 4 ปีที่แล้ว +1

    Awesome video!

  • @declyngurrath9665
    @declyngurrath9665 2 ปีที่แล้ว

    This dude is rad🤙

  • @deevee6203
    @deevee6203 4 ปีที่แล้ว

    Hey man is there anyway i can contact you privately got some questions on how to repair something on my 2.0

  • @patstewart2204
    @patstewart2204 3 ปีที่แล้ว

    You are great, subscribed. thanks for the details mate!

  • @jayshounruttley4609
    @jayshounruttley4609 4 ปีที่แล้ว +1

    How can I contact you directly?

  • @TheC305
    @TheC305 2 ปีที่แล้ว

    2012 Audi A4 how to remove starter

  • @fredericklai3523
    @fredericklai3523 4 ปีที่แล้ว

    Wow. So amazing, thank you so much for your videos! Subbed.

  • @ginorino794
    @ginorino794 ปีที่แล้ว

    I have a 2010 A5 2.0 tfsi quattro tiptronic cabriolet, the engine consumen oil and I have to rebilled the engine the problem arrive after calling repair cars garages and any body I can imagine, I did not fine any body to do it, making the story short, if I take the engine and send it to you, do you rebuilt it and send it to me? I live in Hawaii Oahu, I can send you the engine buy ship and return same or any other way. Please let me know I love my car and I will tried to find a way to repair it.

  • @fl4650
    @fl4650 หลายเดือนก่อน

    You’re the man

  • @NitroVipers3
    @NitroVipers3 4 ปีที่แล้ว

    Pink hat gained you a sub, Also " Im working with one hand and holding the other hand with the camera" Ill be doing this job in a week or so to replace my rings,pistons,rods... 13:50 "there is going to be 6 bolts, let me show you to them" lol

  • @safeinsound432
    @safeinsound432 4 ปีที่แล้ว +1

    13:33 just need to save this. Im not taking that damn bumper off tomorrow

  • @pauljurina1122
    @pauljurina1122 ปีที่แล้ว

    Couldn't have done it without you

  • @juanvelasquez6266
    @juanvelasquez6266 4 ปีที่แล้ว

    Great video. Thanks!

  • @jonathonburnett7292
    @jonathonburnett7292 4 ปีที่แล้ว

    To the right of the boost hose Iin video at 20:18

  • @boroboro8278
    @boroboro8278 2 ปีที่แล้ว

    Thank you you are amazing ♥️

  • @caiomendes4799
    @caiomendes4799 3 ปีที่แล้ว

    Amazing video.

  • @LRTLM
    @LRTLM 3 ปีที่แล้ว

    I have a Audi Q5 suv 🚙 2015. Is in my garage now 😭 please help! I need to replace pitstons and it’s been asking for oil every week. Now my car is shaking! I can’t move it! The dealer say new engine! 12k!!!!

  • @rotor676
    @rotor676 ปีที่แล้ว

    Thanks for sharing bud

  • @salaicungbawi3044
    @salaicungbawi3044 หลายเดือนก่อน

    ❤thank

  • @tedj4270
    @tedj4270 ปีที่แล้ว

    Hey man, i sent an email a couple weeks ago, just wanted to send a msg here also, im in Northeast Pa, 2014 Audi q5, would love to get your help and hire you to fix my Audi, hope to hear back from you🤙🏼

    • @NaptownTuner
      @NaptownTuner  ปีที่แล้ว

      It might have ended up in my junk folder without me knowing, also lots of people email just asking questions and I can’t devote time for that so it’s hard to check all the email at this point. Resend the email and I’ll look for it thanks

  • @heekyukim2075
    @heekyukim2075 3 ปีที่แล้ว

    Thanks G

  • @YogisGarage
    @YogisGarage 4 ปีที่แล้ว

    Yo how can I DM you?

  • @blacktop5853
    @blacktop5853 4 ปีที่แล้ว

    Make t shirts plz I would love to support

  • @richiebledsoe1006
    @richiebledsoe1006 2 ปีที่แล้ว

    Kenipex cobras the only player to buy well at least 3 pack lol

  • @shoppcilla6997
    @shoppcilla6997 ปีที่แล้ว

    " it should of only toke you 26 min and 33 sec

  • @ginorino794
    @ginorino794 ปีที่แล้ว

    jkmgh

  • @stevek9670
    @stevek9670 2 ปีที่แล้ว

    I can't spin engine to get to torque converter bolts...any suggestions?