Trying to build this was such a task man. I had a problem with one of the wheels where the snap ring fell off ( My friend was an engineer and knew a lot about this and I didn't) I waited about almost 2 months or so to get new wheels (if I knew about the wheel sooner probably could have been using it already) I also had a problem with the left side levers where it couldn't catch on probably so. Once everything was installed correctly the machine was pretty damn good. I made a few adjustments. For the metal foot pad, I put a Door Protection Plate and bolted it on so I can go a little wider which worked out perfectly. For the hack squat, since I'm taller(6ft), I put a few boards on the metal part where your feet are, and perfecto. I started putting resistance bands and the machine feels 10000000x better. Also putting wd40 silicone lubricant spray on the wheels and where the side of the wheel up will help a ton also. Like he said do not tighten everything super tight but make sure you check everything every month or so to make sure it's not too loose. I guess I have the older version where I don't have that bar for extra weight but I just use all my rogue thin comp plates (kinda jelly that I don't have that =D). All in all, with a few adjustments, I think this is a great machine. There aren't many videos but from what I learned when you're about to put that back pad to install the machine I would try to put the machine on its side and then install the back pad because it's pretty heavy. Good review man!
Thank you! On this model the only problem I came across was one of the bolts on the foot pad was stripped and its popping out. The other three bolts are nice and tight so it’s holding good! Using comp plates will deff get you more weight on the machine rather than using bumper. 👊 to leg gains 🤟🏽
Nice video! Just wanted to point out that you have the shoulder pads reversed. It will be more comfortable when the pads are angled correctly instead of inward, and the hack handles will be flared out instead of pinching into your head.
For me the very limit of every machine build like this is the fact that with only two horns for the weight loading, you will be soon reach the max amount of plates that you can phisically place. Some machine like atx had long horns , but in the most of the case are too short for leg press average load capacity in my opinion.
Great review. As Titan dont ship to Europe, I chase the Powermark 800 LPHS, similar machine but à bit less well designed, the titan one seems smoother and easier to adjust
Just thought to add, I don’t have this machine yet (on shopping list) but I’m just over 5 ft and normally on hacks at the gym I add yoga blocks on the shoulder pads or add a few wooden boards or foam flooring squares at the base to basically increase the range of motion you can use before hitting depth on the machine. Take my yoga blocks everywhere as shoulder pads or seat boosters at the gym. Life of a gym hobbit 😅
thought I needed a 45deg leg press but instead got the powertec compact hack squat leg sled used $250, and powertec bench leg press attachment used $100. Save me a small fortune and space.
I had this piece. On one of the wheels where the bearing was wore out and I had to replace the wheel from Grainger, titan doesn't sell parts which I think is one big problem from them when it comes to these pieces that has a lot of parts. Besides that it worked well
Do you have a link to the replacement you purchased from Grainger? The bearings on mine glide nowhere near as smooth as they used to and ive been looking to replace them.
@@szshaps Do you know the model number or have a link to the one you purchased? I can measure as well but would like to get one that I know has worked well for someone. TYIA
@@foreignphysique yeah Rogue is definitely super expensive! I also saw that you had what look like a lat pull down from one of your other videos. Is it the rogue one? If so how do you like it?
For 1900 hundred bucks, I would rather buy the hacksquat/leg press combo from Bolt Fitness in Houston, TX. Their stuff is way superior than this one...
I would say home gym only! This wouldn’t handle the beating of a commercial gym. Also anyone over sized or extra tall would have a hard time on this machine.
For the head pad, you have to take the nuts off of those 2 bolts. They screw directly into the head pad. The step are just out of order with those awful instructions haha
Trying to build this was such a task man. I had a problem with one of the wheels where the snap ring fell off ( My friend was an engineer and knew a lot about this and I didn't) I waited about almost 2 months or so to get new wheels (if I knew about the wheel sooner probably could have been using it already) I also had a problem with the left side levers where it couldn't catch on probably so. Once everything was installed correctly the machine was pretty damn good. I made a few adjustments. For the metal foot pad, I put a Door Protection Plate and bolted it on so I can go a little wider which worked out perfectly. For the hack squat, since I'm taller(6ft), I put a few boards on the metal part where your feet are, and perfecto. I started putting resistance bands and the machine feels 10000000x better. Also putting wd40 silicone lubricant spray on the wheels and where the side of the wheel up will help a ton also. Like he said do not tighten everything super tight but make sure you check everything every month or so to make sure it's not too loose. I guess I have the older version where I don't have that bar for extra weight but I just use all my rogue thin comp plates (kinda jelly that I don't have that =D). All in all, with a few adjustments, I think this is a great machine. There aren't many videos but from what I learned when you're about to put that back pad to install the machine I would try to put the machine on its side and then install the back pad because it's pretty heavy. Good review man!
Thank you!
On this model the only problem I came across was one of the bolts on the foot pad was stripped and its popping out. The other three bolts are nice and tight so it’s holding good! Using comp plates will deff get you more weight on the machine rather than using bumper. 👊 to leg gains 🤟🏽
Nice video! Just wanted to point out that you have the shoulder pads reversed. It will be more comfortable when the pads are angled correctly instead of inward, and the hack handles will be flared out instead of pinching into your head.
Do you think the pads on your shoulders should be pointed out instead of in?
been waiting for a video like this
For me the very limit of every machine build like this is the fact that with only two horns for the weight loading, you will be soon reach the max amount of plates that you can phisically place. Some machine like atx had long horns , but in the most of the case are too short for leg press average load capacity in my opinion.
Gympin
The newer model has four horns for loading plates.
Great review. As Titan dont ship to Europe, I chase the Powermark 800 LPHS, similar machine but à bit less well designed, the titan one seems smoother and easier to adjust
Thank you!
We just finished putting ours together and YES directions are lacking a lot. We were however able to put the head pad on lol.
Lol! Hope you enjoy it!
Yeah it attaches to that additional weight bar which then attaches to the slider.
How much squat depth can you add by adjusting the platform?
My wife is 5’, so I’m wondering if she’ll be able to break parallel when hack squatting
I’m sure she will there are 4 adjustments on the foot board! I’m 5’8 and I put it at the second slot.
@@foreignphysique thank you for the response, great video!
Just thought to add, I don’t have this machine yet (on shopping list) but I’m just over 5 ft and normally on hacks at the gym I add yoga blocks on the shoulder pads or add a few wooden boards or foam flooring squares at the base to basically increase the range of motion you can use before hitting depth on the machine. Take my yoga blocks everywhere as shoulder pads or seat boosters at the gym. Life of a gym hobbit 😅
thought I needed a 45deg leg press but instead got the powertec compact hack squat leg sled used $250, and powertec bench leg press attachment used $100. Save me a small fortune and space.
I had this piece. On one of the wheels where the bearing was wore out and I had to replace the wheel from Grainger, titan doesn't sell parts which I think is one big problem from them when it comes to these pieces that has a lot of parts. Besides that it worked well
Do you have a link to the replacement you purchased from Grainger? The bearings on mine glide nowhere near as smooth as they used to and ive been looking to replace them.
I would also love the link to the replacement you purchased from Grainger
@@jendickson233 i believe that was the one i used...you can measure the wheel to make sure you get the right size, but it is a life (equipment) saver
@@szshaps Do you know the model number or have a link to the one you purchased? I can measure as well but would like to get one that I know has worked well for someone. TYIA
Do you know how does this compares with the Force USA Ultimate Leg Press & Hack Squat Combo ? I'm mosty concerned with ROM since my spouse is 5'3"
Not sure about your force product. I’m 5’8 and the range of motion on the leg press is good!
I'm 5'8" and can't get as much depth as I prefer.
If you don’t mind me asking. It seems that you have a lot of rogue stuff. How come you dint go with the Rogue leg press?
Cost!! Rouge is almost 7k and the titan was 1,800 two in one machine.
@@foreignphysique yeah Rogue is definitely super expensive! I also saw that you had what look like a lat pull down from one of your other videos. Is it the rogue one? If so how do you like it?
It is, and it’s a beast love it Was planning on making a full review on it soon!
@@foreignphysique yes please do! They are hardly any reviews on TH-cam about them. The more the better. Thanks!
Can you do calf raises on this like you can with commercial gym decline leg press machines?
Yes. This has the same functions as any leg press you would see at a commercial gym!
Would you rather have this of the belt squat
That’s a tough choice! but I’d go with this because you can always do traditional squats without the belt squat
Hell ya save that money
For 1900 hundred bucks, I would rather buy the hacksquat/leg press combo from Bolt Fitness in Houston, TX. Their stuff is way superior than this one...
It is good for commercial use?
I would say home gym only! This wouldn’t handle the beating of a commercial gym. Also anyone over sized or extra tall would have a hard time on this machine.
For the head pad, you have to take the nuts off of those 2 bolts. They screw directly into the head pad. The step are just out of order with those awful instructions haha
Found this assembly video: th-cam.com/video/jAdqCVATPPI/w-d-xo.html