thanks to all you awesome folks that were in the premiere chat, i seriously havent laughed that hard in a while....I guess we gotta work on a better way to do cool shit like that with you guys. We love doing those, and we love the instant feedback, but the chat was flying by so fast lol i was typing replies as fast as i could but my keyboard skills just aint up to snuff lol. My apologies to those that showed up to hang out and chat but ended up spending their own time and energy reading/replying to shitty horrible comments from a few attention starved fake accounts. For those that didnt get their legitimate questions answered in the chat, post them here. As usual i will hang around for a while and answer as many as i can...... Ps....Im always in here to checkout the feedback/suggestions and answer legitimate questions. But just so you know i dont post content putting down others, and i dont spread rumors/gossip about other men on the internet. The internet is already packed full of enough negativity and hate....no sense in adding to it lol. Thanks for watching everyone! As always im gonna hang around a while and try to answer as many as i can! The last video got 8000ish comments in a week, so needless to say i cant get to all of them, but im gonna try!!! Pss..lol also we are working to start releasing two vids a week and we are hopeful that will happen in the next few weeks....fingers crossed!
Chief- I’ve been watching you since the show first came out, and I love what you do, and Jackie too. What I thank you for the most, is that my 13 year old son.. and I have our time where we watch the show- he loves watching (I of course hope that he doesn’t start doing it!) 🤣 I have a 99-SS Camaro- she’s garage kept and he always asks when he’s going to get to drive it. Luckily it’s a stick- so I think I have a little bit of time before I have to worry. But I just wanted to thank you again…. We will always be supporters!
I like these vids yall are making better than the fake made for tv fukkery on Street Outlaws Shore. Hopefully those studs arent backordered. Wish the TV show woulda showed more of a backstory instead of givin Reaper a platform to insert rumors.
Hi Chief: most people don't understand 18 degree heads have necked down studs so the ports can be widened out to the maximum size. That means for people who do not know the 7/16 thread s are then necked down to 3/8 making them weak. I had a big block with studs similar in the 90s done that way for angle milled heads and had several break after getting it hot one time. I would say o ring and receiver grove it. The small area between the center cylinders is going to be a constant problem if you don't do that. Pontiacs have more meat between the cylinders. Jeff
The way Chief explains everything, he would make a great and fun teacher. He doesn't get bent out of shape when he finds unexpected problems, just finds solutions. Thanks for sharing Chief and Jackie.
I think finding that broken head stud was the best thing that could happen. Now you know what you need to do to make the engine bullet proof. Instead of hoping it was a good engine. Now you will make sure its a good engine. Keep your head up Jackie..
Turned into a forced pull down which should have happened from the start. They REALLY got lucky on this one. That was a disaster waiting to happen. A torched head and block would have been only the start of the problems. Broken valve spring would have probably turned into dropped valve etc etc. A major head and block decking would have turned into new shorter pushrods, and that would probably turned into piston to valve clearance issues... They really dodged a bullet.
@@mcintyretyler89 I would expect no different from what they got. Often people sell things because they have issues, and the more modified something is the higher the risk of something being wrong. No way I would buy a modified engine and stick nitrous on it without knowing what is going on inside. If I was going to buy that kind of engine already assembled and I was serious about buying it, I would want to tear it down before I parted with any cash, or if I knew the person really well a guarantee that they would spring for the parts if anything was wrong or take it back. There are so many little tweaks in a motor like that the chances of finding something very sus are high.
@@justinshearer3016 Yeah buddy I would do like you said you already have it apart I would go thru it and put some top fuel hoops in that bad boy it needs them especially for the middle two cylinders.
Always educational, and interesting tearing down an engine someone else build. The dissection of an engine when you are suspicious of “what else is wrong” is kinda fun and interesting (sucks on the delay it causes) …. Was cool to see Justin’s version of this process! Thanks!
I didn’t know you guys had a channel until a couple of days ago but damn after watching one episode I was hooked! I have never watched so much U-Tube in one sitting,3 hours & counting. You & Jackie are normal people good & bad days you show them,plus you are so open about things that have happened in your lives. I really feel for Jackie with her 383 & worst of all being told that engine ran perfectly unless something happened during the last run? It’s pretty clear to me that engine has not run right for a while! Jackie I’m sure with Chiefs help you guys will get all engine/head issues straightened out & make it one Bad Ass runner! Can’t wait to see what’s next,thanks for putting it out there for us to see!
It’s a good thing that happened because I have a feeling that head gasket wouldn’t have lasted more than a few passes with some nitrous. I used to run those same gaskets and they work okay but definitely won’t hold up to a ton of power especially between the Siamese exhaust valves. Getting it freshened up, O-ringed, is definitely the way to go.
Billy you and Chief should race on small tires no wheelie bars on the street. I think it’d be cool to see the s10 line up with crow on small tires no wheelie bars on the street
@Eric Jester That wouldn’t ever happen 😂 it wouldn’t even be fun to watch. And for him to get the crow setup to run a small tire wouldn’t be worth the time for the race.
@@triplehfarmsllc7348 might not ever happen but real “street cars” don’t typically have wheelie bars or big tires there on a 28.5 10.5. He also made a video saying we need to tell him who we want to see him race including beater bomb which is on small tires no wheelie bars and billy is faster than him on a small tire. All I’m saying is Chief has ran small tires no wheelie bars what’s wrong with doing a real street race with one of the fastest real street racers? Chief himself said “who do I need to race where to I need to unload this mother fucker” go unload that mother fucker in Ohio no wheelie bars and small tires see what happens. Billy raced Brent self and was within a fender I think it’d be a lot better race than you think on the street
I love how you are using TH-cam to get away from the all of the mainstream of Street Outlaws. For all of the people asking about Reaper and that drama, let this man and his girl alone and to work on hotrods and leave the drama where it should stay....
Y’all notice any of the other racers in the 405 come to chiefs defense, yea me either. That should a tell a smart man something, you decide what you are.
Someone that writes that long of bs is trying to cover his ass and make him self think and look good doing it I been around people like you an when I see it I call them out on the bs. So go ahead and try to brain wash other people but not this white boy lmmfao
I freaking love that you guys are doing TH-cam! Thank you so much for making videos for us all to watch. Unfiltered not staged action is the best. Chief and Jackie take on the world of street racing... I'm looking forward to your success and shortcomings all the same. LOVE the realism here!! Y'all are street and it shows, unlike a show about street that for show.
Guy’s my 10 years at FEL-PRO Performance Gaskets I learned how to do this correctly. The thing you don’t understand it the friction between the head and bottom on the nut plus any friction between threads stud and nut. To check breakaway torque. #1 You have to mark the socket with white out and pull the line onto the cylinder head while by hand take up the slack of the socket fit to the nut. #2 now with that done use a breaker bar to back off the nut until it starts to relax. #3 Now with a Dial indicator style torque wrench try and make one smooth movement to match the white out line on the socket with king on the head. #4 now you know the real retained torque. Keep up the great work at 72 my muscles are used up now. Ha Mike
This is easily top 5 TH-cam channel by far. Being a mechanic by trade and hobby (hot rod aircooled VW stuff) and gunsmith I love love LOVE to watch y’all work and learn stuff along the way. Thank you so much to both you guys for this
Damn jackie im sorry u are having to tare your motor down. I know how excited u was to hear the beast run. Just glad u caught it now and it didnt anymore damage. Goodluck guys u will get her dialed in. 👍
I feel like haters will come for you in your brightest hour! Thankful you have Jacky to be there with you! You've always been our favorite! My husband and I enjoy watching you two together! ☺️
Wow!! I truly feel for you Jackie with that being a motor that was to be ready to rock & roll and the cylinders looking like that and all these problems that have surfaced so far I pray nothing else is wrong with the bottom end ❤️
And Justin you might look into what TKM racing engines is doing with the full solid stainless rings that they are put in the blocks and heads and it crushes the gasket like you was talking about how you’ve done on the crow
@@JMillerJr76 only reason I said them is I just watched another video where it showed and talked about them, I’m way out of the game when it comes to that kind of stuff and who all does anything like that
I cannot believe how bonded you two seem in life. Jackie, you and Chief’s happiness makes me see a rare thing in life. Soul mates is it? Two people with a passion for each other and the biggest job/hobby? Super rare. I swear I’m touched emotionally. Even though I saw SO first, I didn’t comb to see what you’re doing outside of the show, but I came here to your channel from watching SIM. He’s about my son’s age, swam just like my son and I just thought the world of how he does his channel because of his good heart and true love for what he saw in Big Chief on TV. Watching you on TV brought me back to my youth when my mom and dad raced in the 70’s and 80’s. I know how hard it is to be close (as a family) and to be the best in your sport at the same time. Seeing you on “pink slips” racing and all the way to be point man on SO was good medicine. Hard work and knowing what you’re doing pays off. Thanks for being so nice to SIM and I just want to say I am not the least bit jealous of you being one of the best. All’s fair in love and war, right? I’m all over the place but I am just trying to say I am fascinated, thanks. 🙏
Lmao I was dying when you hit the hulk hogan “BROTHER” hopefully one day I’ll have a race car. Like the great Ricky Bobby once said, “I just wanna go fast”
Man I thought “Ol boy” said it was running fine when pulled from the car!? Love the content, can’t wait for race time! Justin you’re my favorite in the 405, I’m a fan forever bro & excited for the future!
I’m glad you were able to get the stud out without an issue. I’m enjoying the tech videos and it’s cool how Chief explains stuff as he goes for those who don’t know or understand. Jackie your doing a great job with the videos and from what I’m seeing of that motor you are gonna have one hell of a race car.👍
thanks for the kind words!!! we try to have a little something for everyone cause we understand that sometimes racecars can be the most insane crazy ride ever, but also sometimes it can be just doing work to the same part or same area of the car, so we do our best to explain as much as we can....even if half the time i might not know what im talking about lol
I felt that when that snapped stud spun free! It's a "Is this going to take 15mins or 15hrs?" type of situation! Love the content! Can't wait to see some racing!
So glad that broken stud came out as easy as it did.Tearing everything down worked out in the long run, you'll be sure everything is solid. Best of luck,keep the videos coming🏁
thank you! it has occurred to me that maybe not everyone knows this stuff, or maybe not everyone cares lol but i still try to explain as much as i can lol...or atleast i try to sound smart anyways
I respect any team like this. Your girl can wrench.... thats awesome. BTW. I DONT CARE WHAT REAPER SAID. Everyone has their demons... Stay strong. Wrench more. Let the rest talk... its all they have.
Cheif why don't you say just something about White Fred Sanford " Reaper" he's a sad piece of shit and all his projects that don't get done and his Camara girl is dope up on Zannies she can leave , don't listen to that Bull Shitter
Hey chief and Jackie man that broken headstud was a blessing in disguise hopefully ain't nothing else wrong with that motor and you guys can get it back together and fire that badboy up so ya'll can comence to hurting some feelings can't wait for the next video and as always keep up the awesome work guys let's go 💪 💯
Chief is the man. I keep saying over and over.you should get your own show. Make the big bucks brother. You are the face of street racing. You are in a position you can demand wherever the fuck you want with any network..and you know it.
For sure, there's no doubt about that..dtw If dumbass Richard Rawlins can hold down a show for 15 years..??? Justin Big-Chief actually races the cars he builds. Richard Rawlings He didn't even have the balls to drag race his own car against Street Outlaws Big Chief against gas monkey garage several year's back had to hire Professional NHRA driver Alex Laughlin , Pro stock driver, Pro-mod and now T/F Dragster pilot
His own, show from who exactly? Not Discovery and Pilgrim, that's for sure. And nobody else is making a show like this. So...? He aint in a position to demand anything. Hence why he ain't on the show anymore. And why he won't go any further than a semi decent youtube channel with a crappy following.
@@J.C... I guess you live in a farm far far away with limited internet. Let's face it. And hope you understand the fact big chief is the face of racing. He is a good speaker trust me on this.he can start his own show. Is hundreds of channels. Not just discovery channel. Mark my words soon you going to see him making it big....he is mr Hollywood. If you read this make a pilot of the history of racing were you do the talking. Introduction. Something like dirty jobs... is clearly to me that some people has something against big chief..is call jealousy.. lol peace everyone
Love the work as always videos are super well done great job super stoked for content 👏 you have been going strong for a while now and it's good to see you enjoying what u do
It doesn't matter to me what anyone says. I enjoy you 2. Nobody's perfect. Everyone has faults. To each their own. I'm gonna enjoy the videos and wherever else we see you. Keep up the great work 👍. Og #7. Lol
i have been watching the show from the first one and i could tell the show was changing i apprecate the way you came out and explained your feelings of the way it was going and how you felt and how you was not going to change your ways to make the producers happy......i also love the new show and that your wife is in there working on her car keep doing you and i will keep watching Danny💪
We love you Chief for who you are forget this jealous people if wasn't for you street outlaws wouldn't never be what it is because of you keep your head up .....
Great content, sometimes things happen for a reason. Though I’ve never seen a head stud break like that either. But now you know what you have and can put a plan together. Glad you and that good looking little gal are happy doing what you love to do. No drama bs. Not everyone can stay out of it. Tons of respect for that.
I can empathize with all the BS I'm sure you're hearing and dealing with, people talkin'sht, straight lying, seemingly hating for no reason... I feel u dawg, been there b4. Keep up the good work tho, love the content.
So stoked you're doing this. I'll be a regular. I've always felt we were kindred spirits, not in a weird way. Followed your career since season 1. Glad you're getting back to your roots and cutting out all the noise. Looking forward to future postings. Keep the great shit coming!
Man that sucks the motors hurt I'm just glad you guys got the bolt out and found out before a test pass and really hurt it bad plus now it will be a fresh motor and last 💯👍
Glad to see both of you getting back to the things you love. I'm just an old hick from Maine, but have enjoyed watching all the way back in an early episode of Pinks. Keep the vids coming!
thank you! im going to find a solution for the live chat trolls and ill let yall know how we can keep doing it for those of yall that enjoy it like we do
hey justin loved the show but i love watching you guys wrench way more im a wrench guy i love to race just as much as i like to wrench. Plese keep up this channel loving the content :) keep up the good work all the real supporters will be here for life no matter what
Justin sounds like me working on an engine, talking to it, talking to myself, talking to my sidekick, etc... I am liking this side of him and Jackie and seeing very different sides to different motors and the things others do when building engines and the shit we find when tearing them down.
This is cool. We all get to learn alot by watching and listening to what Big Chief says. I really enjoy watching him and Jackie work on there stuff. Awesome channel keep up the great work.
Thanks for the videos. You guys are great. Oh, if I can't see Chief and Jackie on Street outlaws or America's list I won't watch at all !!! I already changed my dvr to not record them anymore. Keep up with what you do !!!
Thank ya'll for taking time out to let us peak into the building of and working on soon to be small tire competitive car. Plus we ( I ) really appreciate you taking the high road after another video tried to lure you into garbage land. I would go with the O'ring set up but you ALREADY know that lol
“Love a good T&D rocker” toured the factory on Friday! Great people world class products! Right here in town 🙏🏻 Thanks for the rad content Chief and Jackie
I feel whoever sold you that engine screwed you guys, it honestly looks like it needs a rebuild. Sorry you guys had to go through all that. Keep your heads held high and keep grinding, love the content and can't wait to see the car finished and you guys having fun kicking ass.
Hope she didn’t buy that 383 “ready to run”… It really sucks you had to pull it apart before it got started. At least you found the issued before it got ran hard…. It could have been real ugly…
Man, I hated to see problems on caddy Jack's new/ used engine. However, you will get to make some performance upgrades that will help you in the long run. I remember when I ran n2o I burned a hole between cylinders on the head on super Chevy Sunday , and still took home the money for stock class and didn't touch the nitrous all night.
Hey man i started watching the show cuz of you .now u left it .plz kindly come back on the show .it is boring without you and the crow .love your work and ur race master skills and solution to almost all the problems in race world. Lots of love .always prosper both of you .
I seriously thought that engine was ready to go. But thank God that stud fell out, otherwise you wouldn't known about which turned into finding out about the valve spring & then seeing the atrocious state of those cylinder walls. I hope you check the side. Thanks for video & as always.... Prayers for continued success!
I lost my mind watching that busted stud just sitting there. I was screaming in my head "get that thing outta there already" as always. Thanks for the education and how do I get invited to the premier chat next time?
Keep up the good work and love the honesty and the little bits of technical knowledge dropped in videos, as well as little bits of humour. Ps it's funny when Justin has the camera he always videos Jackie's bottom.
Ehhhh…..man really it’s kind part of buying used race stuff. Not everyone knows as much as the next person or notices things as quickly ya know. It sucks but can’t really say it was intentional
Since Reaper's video Chuck along with others have said the same thing Reaper was saying. I mean couldn't you tell in "chief's" last video that he was making himself out to be a victim and trying to gain points with uninformed fans?
@@bobfalfa76 where did he try to make himself a victim is that what you got from that? He clearly said he is good and he doesn't want to do something that he feels like he isn't behind 100 percent. He never once said oh man they kicked me out or wine about anything he said he left. A victim isn't someone that leaves. Clearly Jj da junk did or say something he didn't like and chief only needed maybe one thing to bounce from it all.
Been following you brother ever since Pink's! Badass love watching all your content and would love to be right there beside you taking that apart ✌🏼❤️💪🏼
Thanx for the update on the lac .... I'm glad your sharing this journey with all of us .... and for all the bullshit haters that wanna run they pie hole on line ... that's all they got is hate and you have no reason to even acknowledge them .. fuk'm Chief .... you and yours is all you need to worry bout .... get them Hot Rods ready and go rotate the earth on they asses .... Much love from the 205
Coming from the Cummins diesel world when you said how light those studs was torqued to I about fell over. I agree with you a fire ring (o ring) cut into the block and head is the best bet to keep it from happening again. Shitty to find all that in a “new” motor but better to find it now Vice on a test pass or first startup. Keep the vids coming Chief and Jackie y’all OG.
Best damn show on you tube. First thing I watched after parking my rig for the night in Illinois. Now time to read and laugh at some of the comments from the not so smart mommy and daddy basement dwellers. You two are killin it. Thanks for the entrainment.
I would definitely pull the engine hone it bearing it have the block decked and ringed heads checked and decked if need be just have it all good to go and you know what you have
Another great video. You know whats cool, videos where people are turning wrenches and making passes and not just hating on people starting more drama about other people. It's really cool that you folks are focusing on content that is focused on what we all love, THE CARS, not bullshit. Thank You!!!! Glad the headstud was also exposed and a good old pair of Knipex alligator pliers was all that was needed. If you know you know about the alligator pliers lol.
So when running methonal or alcohol..you should run it on gas if ur going to park for a while so u don't get the moisture and rust ..I would also recommend pulling the push rods
whats weird is this engine has always been on gasoline and it looked like that lol.....my engine however is on methanol/nitro and clean as a whistle and ive never ran gas thru it since 2017 when we built the car....i dont get it either
love watching you guys work forget reaper he is sour grapes he is couple bricks short of a load he blames every body but himself for getting his car removed off the list
Jackie I love the content and editing, so I don't want this to seem like I'm bitching. 😅 Could you turn the music down when it's overlayed into the video. That's all! Y'all be safe tonight! We got some boomers rolling in tonight! 😃
you should do a show with all the fastest small tire guys across the country, it would be just as successful as all the other shows, people are sick of the big tire shit,its unrealistic to most street racers, a small tire show would be a endless supply of competition and contient.
It's funny that murder nova and reaper both have said that the next season of the 405 without chief will be exactly that. Small tire out of town racing. Guess we'll have to wait and see
That head and block need more water moving between the center two cylinders. Common problem on Exhaust valves next to each other. If you find a way to move faster it will help cooling the casting. The best benefit it you can increase cooling you will also keep those 4 cylinders from detonating FIRST. You might need to add extra cooling holes 1/4 down from block deck between cylinders and also between chambers. Remember always moving a solid column of water Faster WILL remove heat from castings. Go to the front!!!!!
![งมหอย จับปลา มือเปล่า หาอยู่หากินแบบวีถีอีสานกับแก๊งเซียนหรั่ง ม่วนคัก! [ขอนแก่น] @Sianstudio](http://i.ytimg.com/vi/JEJZg6N-AbU/mqdefault.jpg)
thanks to all you awesome folks that were in the premiere chat, i seriously havent laughed that hard in a while....I guess we gotta work on a better way to do cool shit like that with you guys. We love doing those, and we love the instant feedback, but the chat was flying by so fast lol i was typing replies as fast as i could but my keyboard skills just aint up to snuff lol. My apologies to those that showed up to hang out and chat but ended up spending their own time and energy reading/replying to shitty horrible comments from a few attention starved fake accounts. For those that didnt get their legitimate questions answered in the chat, post them here. As usual i will hang around for a while and answer as many as i can......
Ps....Im always in here to checkout the feedback/suggestions and answer legitimate questions. But just so you know i dont post content putting down others, and i dont spread rumors/gossip about other men on the internet. The internet is already packed full of enough negativity and hate....no sense in adding to it lol. Thanks for watching everyone! As always im gonna hang around a while and try to answer as many as i can! The last video got 8000ish comments in a week, so needless to say i cant get to all of them, but im gonna try!!!
Pss..lol also we are working to start releasing two vids a week and we are hopeful that will happen in the next few weeks....fingers crossed!
Great work and keep doing your thing!
No I been in the lope and I know what's going on watch the show then tell me
Chief- I’ve been watching you since the show first came out, and I love what you do, and Jackie too. What I thank you for the most, is that my 13 year old son.. and I have our time where we watch the show- he loves watching (I of course hope that he doesn’t start doing it!) 🤣 I have a 99-SS Camaro- she’s garage kept and he always asks when he’s going to get to drive it. Luckily it’s a stick- so I think I have a little bit of time before I have to worry. But I just wanted to thank you again…. We will always be supporters!
KEEP EM COMING CHIEF, IGNORE THE FLIES...JACKIE IS AWESOME!
I like these vids yall are making better than the fake made for tv fukkery on Street Outlaws Shore. Hopefully those studs arent backordered. Wish the TV show woulda showed more of a backstory instead of givin Reaper a platform to insert rumors.
Hi Chief: most people don't understand 18 degree heads have necked down studs so the ports can be widened out to the maximum size. That means for people who do not know the 7/16 thread s are then necked down to 3/8 making them weak. I had a big block with studs similar in the 90s done that way for angle milled heads and had several break after getting it hot one time. I would say o ring and receiver grove it. The small area between the center cylinders is going to be a constant problem if you don't do that. Pontiacs have more meat between the cylinders. Jeff
exaaaactly....
Excellent young men the country is safe common sense still wins 👍🏻
The way Chief explains everything, he would make a great and fun teacher. He doesn't get bent out of shape when he finds unexpected problems, just finds solutions. Thanks for sharing Chief and Jackie.
I think finding that broken head stud was the best thing that could happen. Now you know what you need to do to make the engine bullet proof. Instead of hoping it was a good engine. Now you will make sure its a good engine. Keep your head up Jackie..
lol, bullet proof nitrous motor.... good one!
Honestly it probably did save them from torching the head or block
Turned into a forced pull down which should have happened from the start. They REALLY got lucky on this one. That was a disaster waiting to happen. A torched head and block would have been only the start of the problems. Broken valve spring would have probably turned into dropped valve etc etc. A major head and block decking would have turned into new shorter pushrods, and that would probably turned into piston to valve clearance issues... They really dodged a bullet.
@@lipolife959 Sure, but they are still going to blow it up at some point. "bullet proof" is what I found so funny.
@@mcintyretyler89 I would expect no different from what they got. Often people sell things because they have issues, and the more modified something is the higher the risk of something being wrong. No way I would buy a modified engine and stick nitrous on it without knowing what is going on inside. If I was going to buy that kind of engine already assembled and I was serious about buying it, I would want to tear it down before I parted with any cash, or if I knew the person really well a guarantee that they would spring for the parts if anything was wrong or take it back. There are so many little tweaks in a motor like that the chances of finding something very sus are high.
Chief makes learning fun 😂 cool to see this side of him. Thanks for the content 🔥
Old Chief Garage !! Your second channel .🏆
shhhh the first rule of old chief
@@justinshearer3016 YOUR NOT BIG CHEIF DUDE,UR A IMPOSTER,A FRAUD,A PHONY,STOP USING CHEIF NAME TO GET SUBSCRIBERS.OR ELSE!!!!
@@justinshearer3016 🤣
@@justinshearer3016 Yeah buddy I would do like you said you already have it apart I would go thru it and put some top fuel hoops in that bad boy it needs them especially for the middle two cylinders.
Always educational, and interesting tearing down an engine someone else build. The dissection of an engine when you are suspicious of “what else is wrong” is kinda fun and interesting (sucks on the delay it causes) …. Was cool to see Justin’s version of this process! Thanks!
I didn’t know you guys had a channel until a couple of days ago but damn after watching one episode I was hooked! I have never watched so much U-Tube in one sitting,3 hours & counting. You & Jackie are normal people good & bad days you show them,plus you are so open about things that have happened in your lives. I really feel for Jackie with her 383 & worst of all being told that engine ran perfectly unless something happened during the last run? It’s pretty clear to me that engine has not run right for a while! Jackie I’m sure with Chiefs help you guys will get all engine/head issues straightened out & make it one Bad Ass runner! Can’t wait to see what’s next,thanks for putting it out there for us to see!
It’s a good thing that happened because I have a feeling that head gasket wouldn’t have lasted more than a few passes with some nitrous. I used to run those same gaskets and they work okay but definitely won’t hold up to a ton of power especially between the Siamese exhaust valves. Getting it freshened up, O-ringed, is definitely the way to go.
Billy you and Chief should race on small tires no wheelie bars on the street. I think it’d be cool to see the s10 line up with crow on small tires no wheelie bars on the street
@@emjester48 🤣 🤣 🤣 🤣
@Eric Jester That wouldn’t ever happen 😂 it wouldn’t even be fun to watch. And for him to get the crow setup to run a small tire wouldn’t be worth the time for the race.
@@triplehfarmsllc7348 might not ever happen but real “street cars” don’t typically have wheelie bars or big tires there on a 28.5 10.5. He also made a video saying we need to tell him who we want to see him race including beater bomb which is on small tires no wheelie bars and billy is faster than him on a small tire. All I’m saying is Chief has ran small tires no wheelie bars what’s wrong with doing a real street race with one of the fastest real street racers? Chief himself said “who do I need to race where to I need to unload this mother fucker” go unload that mother fucker in Ohio no wheelie bars and small tires see what happens. Billy raced Brent self and was within a fender I think it’d be a lot better race than you think on the street
I love how you are using TH-cam to get away from the all of the mainstream of Street Outlaws. For all of the people asking about Reaper and that drama, let this man and his girl alone and to work on hotrods and leave the drama where it should stay....
#respect
Amen...🙏
agree...I'm only here to support BIG CHIEF & JACKIE in whatever they choose to do...Everything else is invisible....Keep em coming Chief
Y’all notice any of the other racers in the 405 come to chiefs defense, yea me either. That should a tell a smart man something, you decide what you are.
Reaper is a damn drama queen. He seen a chance for 5 more minutes, and opened his mouth and fell out flat like his car.
I really enjoy watching y’all working together. I’ve learned so much & appreciate how you explain things as you go . Great editing & thanks again.
agree...BIG CHIEF IS STILL 1
This is where you learn? Oh shit
Someone that writes that long of bs is trying to cover his ass and make him self think and look good doing it I been around people like you an when I see it I call them out on the bs. So go ahead and try to brain wash other people but not this white boy lmmfao
I freaking love that you guys are doing TH-cam! Thank you so much for making videos for us all to watch. Unfiltered not staged action is the best. Chief and Jackie take on the world of street racing... I'm looking forward to your success and shortcomings all the same. LOVE the realism here!! Y'all are street and it shows, unlike a show about street that for show.
Man you could make a 2 hour vid and I’ll still watch, I always watch start to finish and my eyes are glued, chief your the goat🤟🏿
LT King36 chief's not a goat, he just drives one
Reality
Guy’s my 10 years at FEL-PRO Performance Gaskets I learned how to do this correctly. The thing you don’t understand it the friction between the head and bottom on the nut plus any friction between threads stud and nut.
To check breakaway torque.
#1 You have to mark the socket with white out and pull the line onto the cylinder head while by hand take up the slack of the socket fit to the nut.
#2 now with that done use a breaker bar to back off the nut until it starts to relax.
#3 Now with a Dial indicator style torque wrench try and make one smooth movement to match the white out line on the socket with king on the head.
#4 now you know the real retained torque.
Keep up the great work at 72 my muscles are used up now. Ha
Mike
This is easily top 5 TH-cam channel by far. Being a mechanic by trade and hobby (hot rod aircooled VW stuff) and gunsmith I love love LOVE to watch y’all work and learn stuff along the way. Thank you so much to both you guys for this
thank you! we appreciate it more than you know!! if you ever have video requests just let us know!
I absolutely agree with you about it being a top 5 You Tube channel especially for any gear head or builders...
I thought somebody built that engine. Good thing you pulled old rusty apart. As always much love and God bless.
Damn jackie im sorry u are having to tare your motor down. I know how excited u was to hear the beast run. Just glad u caught it now and it didnt anymore damage. Goodluck guys u will get her dialed in. 👍
I feel like haters will come for you in your brightest hour! Thankful you have Jacky to be there with you! You've always been our favorite! My husband and I enjoy watching you two together! ☺️
Wow!! I truly feel for you Jackie with that being a motor that was to be ready to rock & roll and the cylinders looking like that and all these problems that have surfaced so far I pray nothing else is wrong with the bottom end ❤️
And Justin you might look into what TKM racing engines is doing with the full solid stainless rings that they are put in the blocks and heads and it crushes the gasket like you was talking about how you’ve done on the crow
@@fieldshelby tkm ain’t the only ones that do billet hoops. We do them as well.
Hopefully Kye man's up and does the right thing.. Is my opinion..
@@JMillerJr76 only reason I said them is I just watched another video where it showed and talked about them, I’m way out of the game when it comes to that kind of stuff and who all does anything like that
Yo chief I see you in a funny car.nhra funny car
I cannot believe how bonded you two seem in life. Jackie, you and Chief’s happiness makes me see a rare thing in life. Soul mates is it? Two people with a passion for each other and the biggest job/hobby? Super rare. I swear I’m touched emotionally. Even though I saw SO first, I didn’t comb to see what you’re doing outside of the show, but I came here to your channel from watching SIM. He’s about my son’s age, swam just like my son and I just thought the world of how he does his channel because of his good heart and true love for what he saw in Big Chief on TV. Watching you on TV brought me back to my youth when my mom and dad raced in the 70’s and 80’s. I know how hard it is to be close (as a family) and to be the best in your sport at the same time. Seeing you on “pink slips” racing and all the way to be point man on SO was good medicine. Hard work and knowing what you’re doing pays off. Thanks for being so nice to SIM and I just want to say I am not the least bit jealous of you being one of the best. All’s fair in love and war, right? I’m all over the place but I am just trying to say I am fascinated, thanks. 🙏
Lmao I was dying when you hit the hulk hogan “BROTHER” hopefully one day I’ll have a race car. Like the great Ricky Bobby once said, “I just wanna go fast”
Man I thought “Ol boy” said it was running fine when pulled from the car!? Love the content, can’t wait for race time! Justin you’re my favorite in the 405, I’m a fan forever bro & excited for the future!
I’m glad you were able to get the stud out without an issue. I’m enjoying the tech videos and it’s cool how Chief explains stuff as he goes for those who don’t know or understand. Jackie your doing a great job with the videos and from what I’m seeing of that motor you are gonna have one hell of a race car.👍
thanks for the kind words!!! we try to have a little something for everyone cause we understand that sometimes racecars can be the most insane crazy ride ever, but also sometimes it can be just doing work to the same part or same area of the car, so we do our best to explain as much as we can....even if half the time i might not know what im talking about lol
I felt that when that snapped stud spun free! It's a "Is this going to take 15mins or 15hrs?" type of situation! Love the content! Can't wait to see some racing!
Love watching u an Jackie work together teenage boys humor always make the ladies laugh great video guys keep up the good work
thanks!!!!
So glad that broken stud came out as easy as it did.Tearing everything down worked out in the long run, you'll be sure everything is solid. Best of luck,keep the videos coming🏁
thank you!!
Thanks for taking us thru the breakdown and explanation. You are easy to follow and funny
thank you! it has occurred to me that maybe not everyone knows this stuff, or maybe not everyone cares lol but i still try to explain as much as i can lol...or atleast i try to sound smart anyways
I respect any team like this. Your girl can wrench.... thats awesome. BTW. I DONT CARE WHAT REAPER SAID. Everyone has their demons...
Stay strong. Wrench more. Let the rest talk... its all they have.
Reaper don't even know what he's talking about lol, he's just jealous with small man's syndrome.
Cheif why don't you say just something about White Fred Sanford " Reaper" he's a sad piece of shit and all his projects that don't get done and his Camara girl is dope up on Zannies she can leave , don't listen to that Bull Shitter
Hey chief and Jackie man that broken headstud was a blessing in disguise hopefully ain't nothing else wrong with that motor and you guys can get it back together and fire that badboy up so ya'll can comence to hurting some feelings can't wait for the next video and as always keep up the awesome work guys let's go 💪 💯
Thank you guys ,for standing up for your viewer's. You guys are missed
Jeez...Cant wait for the next Live Chat already...Big Chief 1....
Chief is the man. I keep saying over and over.you should get your own show. Make the big bucks brother. You are the face of street racing. You are in a position you can demand wherever the fuck you want with any network..and you know it.
For sure, there's no doubt about that..dtw If dumbass Richard Rawlins can hold down a show for 15 years..??? Justin Big-Chief actually races the cars he builds. Richard Rawlings He didn't even have the balls to drag race his own car against Street Outlaws Big Chief
against gas monkey garage several year's back had to hire Professional NHRA driver Alex Laughlin , Pro stock driver, Pro-mod and now T/F Dragster pilot
His own, show from who exactly? Not Discovery and Pilgrim, that's for sure. And nobody else is making a show like this.
So...? He aint in a position to demand anything. Hence why he ain't on the show anymore. And why he won't go any further than a semi decent youtube channel with a crappy following.
@@J.C... I guess you live in a farm far far away with limited internet. Let's face it. And hope you understand the fact big chief is the face of racing. He is a good speaker trust me on this.he can start his own show. Is hundreds of channels. Not just discovery channel. Mark my words soon you going to see him making it big....he is mr Hollywood. If you read this make a pilot of the history of racing were you do the talking. Introduction. Something like dirty jobs... is clearly to me that some people has something against big chief..is call jealousy.. lol peace everyone
🤣🤣🤣
Love the work as always videos are super well done great job super stoked for content 👏 you have been going strong for a while now and it's good to see you enjoying what u do
thank you!!!! its nice to hear stuff like that
Love the content videos like this is what keep us locked in!! Keep up the great work!!
thank you!!
Good to see you actually work on your motors.
It doesn't matter to me what anyone says. I enjoy you 2. Nobody's perfect. Everyone has faults. To each their own. I'm gonna enjoy the videos and wherever else we see you. Keep up the great work 👍. Og #7. Lol
thank you for the kind words, it means alot!!
I agree.... dont like whats going on here then keep scrolling....
i have been watching the show from the first one and i could tell the show was changing i apprecate the way you came out and explained your feelings of the way it was going and how you felt and how you was not going to change your ways to make the producers happy......i also love the new show and that your wife is in there working on her car keep doing you and i will keep watching Danny💪
We love you Chief for who you are forget this jealous people if wasn't for you street outlaws wouldn't never be what it is because of you keep your head up .....
thank you, it means alot
Great content, sometimes things happen for a reason. Though I’ve never seen a head stud break like that either. But now you know what you have and can put a plan together. Glad you and that good looking little gal are happy doing what you love to do. No drama bs. Not everyone can stay out of it. Tons of respect for that.
I can empathize with all the BS I'm sure you're hearing and dealing with, people talkin'sht, straight lying, seemingly hating for no reason...
I feel u dawg, been there b4. Keep up the good work tho, love the content.
So stoked you're doing this. I'll be a regular. I've always felt we were kindred spirits, not in a weird way. Followed your career since season 1. Glad you're getting back to your roots and cutting out all the noise. Looking forward to future postings. Keep the great shit coming!
Man that sucks the motors hurt I'm just glad you guys got the bolt out and found out before a test pass and really hurt it bad plus now it will be a fresh motor and last 💯👍
Hopefully Kye man's up and does the right thing. 🤔😕
Glad to see both of you getting back to the things you love. I'm just an old hick from Maine, but have enjoyed watching all the way back in an early episode of Pinks. Keep the vids coming!
Thanks Chief and Jackie fir the awesome video much respect for you both thanks again
Love the content guys. I appreciate that you guys stop by in the chat and talk with the fans. Can’t wait for more videos
thank you! im going to find a solution for the live chat trolls and ill let yall know how we can keep doing it for those of yall that enjoy it like we do
Awesome video/class as usual Jackie and chief can't wait for the field trip to the shop and see what happens there
hey justin loved the show but i love watching you guys wrench way more im a wrench guy i love to race just as much as i like to wrench. Plese keep up this channel loving the content :) keep up the good work all the real supporters will be here for life no matter what
It looked like that number seven cylinder still had a lot of rust in it hopefully it all turns out good have a great day you guys make good content
thank you gary!
@Gary Hahn Agreed
Justin sounds like me working on an engine, talking to it, talking to myself, talking to my sidekick, etc... I am liking this side of him and Jackie and seeing very different sides to different motors and the things others do when building engines and the shit we find when tearing them down.
thank you!! 🙏🏻
Bummer that motor has definately been ran hard. Good catch on the broken spring.
I love these videos that show and explain in detail engine stuff. I’m a fabricator that is very interested in learning how to work on engines.
Awsome video chief and jackie love the seeing yall fix the issue with caddy jack 405 rules crow fastest on the street.
Don’t know how I just now found out about y’all’s channel, but supper glad you are doing this. 🤙🏻
That’s a bummer but y’all will get it back running soon. Much respect to you both
🙏🏻
This is cool. We all get to learn alot by watching and listening to what Big Chief says. I really enjoy watching him and Jackie work on there stuff. Awesome channel keep up the great work.
Thanks for the videos. You guys are great. Oh, if I can't see Chief and Jackie on Street outlaws or America's list I won't watch at all !!! I already changed my dvr to not record them anymore. Keep up with what you do !!!
I didnt even watch last nite I’m done with it till they ask chief to return or he gets his own show
Man who speaks the least says the most. Big Cheif is a real racer period no fluff.
🙏🏻🙏🏻
Src racing all day i would like to see u race billy...I support Midwest street cars to
Thank ya'll for taking time out to let us peak into the building of and working on soon to be small tire competitive car. Plus we ( I ) really appreciate you taking the high road after another video tried to lure you into garbage land. I would go with the O'ring set up but you ALREADY know that lol
Pressure from NOS you would think a flat head gasket would never be used... That's crazy!!!
“Love a good T&D rocker” toured the factory on Friday! Great people world class products! Right here in town 🙏🏻
Thanks for the rad content Chief and Jackie
It sucks that the motor has so much damage, but I'm glad you found it before you started it!
wow Jackie killin it. Can run circles are alot of people. Nice job!!
Right on!! Always look forward to your video's!!
Cool to see you working on cars and no drama. Love it
I feel whoever sold you that engine screwed you guys, it honestly looks like it needs a rebuild. Sorry you guys had to go through all that. Keep your heads held high and keep grinding, love the content and can't wait to see the car finished and you guys having fun kicking ass.
It was from Kye Kelly.
@@jonbraid2520 🤣
@@terra2805 It was.
Awesome bit of luck there guys😊best outcome you could of had hopefully the caddie be back on the streets in no time 🤞
Hope she didn’t buy that 383 “ready to run”…
It really sucks you had to pull it apart before it got started. At least you found the issued before it got ran hard…. It could have been real ugly…
Omg, good point...Unusual wear & tear considering the car only had 30-50 passes..
Spotted the 100 spoke Dayton with a nice whitewall tat. You got my respect lol Who else remembers PINKS?
Thanks Jackie and Chief for the videos. We all know you guys love your fans and hate the jerks!!! Take care guys! Good luck with the heads👍👍👌👌✌✌
thank you mr will! 🙏🏻🙏🏻🙏🏻
Chief and Jackie you guys really know what you're doing I'm glad you're doing it
Man, I hated to see problems on caddy Jack's new/ used engine. However, you will get to make some performance upgrades that will help you in the long run. I remember when I ran n2o I burned a hole between cylinders on the head on super Chevy Sunday , and still took home the money for stock class and didn't touch the nitrous all night.
Hey man i started watching the show cuz of you .now u left it .plz kindly come back on the show .it is boring without you and the crow .love your work and ur race master skills and solution to almost all the problems in race world. Lots of love .always prosper both of you .
After seeing the stud, gasket and rust I’d freshen the entire engine
thats what were doing!
@@MidwestStreetCarsAuto y’all took seeing those issues a lot better than I would have. Cause I’m sure that engine wasn’t cheap.
I seriously thought that engine was ready to go. But thank God that stud fell out, otherwise you wouldn't known about which turned into finding out about the valve spring & then seeing the atrocious state of those cylinder walls. I hope you check the side.
Thanks for video & as always.... Prayers for continued success!
I lost my mind watching that busted stud just sitting there. I was screaming in my head "get that thing outta there already" as always. Thanks for the education and how do I get invited to the premier chat next time?
Keep up the good work and love the honesty and the little bits of technical knowledge dropped in videos, as well as little bits of humour.
Ps it's funny when Justin has the camera he always videos Jackie's bottom.
You got burned on that one A fresh engine should not have those type of problems hopefully he makes it right with Jackie and you
Ehhhh…..man really it’s kind part of buying used race stuff. Not everyone knows as much as the next person or notices things as quickly ya know. It sucks but can’t really say it was intentional
yeah he told us it had 30ish passes on it but we will fix it and keep going
I'm really glad you found problems before hitting the tracks. Thanks for the explanation of the gasket squish.
Can't wait for the next video!
Peace
Reaper probably watching to learn something!!!!
Ha ha right
Rent free in reapers head
Since Reaper's video Chuck along with others have said the same thing Reaper was saying. I mean couldn't you tell in "chief's" last video that he was making himself out to be a victim and trying to gain points with uninformed fans?
@@bobfalfa76 where did he try to make himself a victim is that what you got from that? He clearly said he is good and he doesn't want to do something that he feels like he isn't behind 100 percent. He never once said oh man they kicked me out or wine about anything he said he left. A victim isn't someone that leaves.
Clearly Jj da junk did or say something he didn't like and chief only needed maybe one thing to bounce from it all.
@@bobfalfa76 where did chuck say anything? Or others? Link?
Been following you brother ever since Pink's! Badass love watching all your content and would love to be right there beside you taking that apart ✌🏼❤️💪🏼
Thanx for the update on the lac .... I'm glad your sharing this journey with all of us .... and for all the bullshit haters that wanna run they pie hole on line ... that's all they got is hate and you have no reason to even acknowledge them .. fuk'm Chief .... you and yours is all you need to worry bout ....
get them Hot Rods ready and go rotate the earth on they asses ....
Much love from the 205
thank you danny! 🙌🏻🙏🏻
These nuts. Got em.. another great video. Thank you, guys for the awesome content.
Coming from the Cummins diesel world when you said how light those studs was torqued to I about fell over. I agree with you a fire ring (o ring) cut into the block and head is the best bet to keep it from happening again. Shitty to find all that in a “new” motor but better to find it now Vice on a test pass or first startup. Keep the vids coming Chief and Jackie y’all OG.
I about did the same thing lol. Coming from cummins world as well
Best damn show on you tube. First thing I watched after parking my rig for the night in Illinois. Now time to read and laugh at some of the comments from the not so smart mommy and daddy basement dwellers. You two are killin it. Thanks for the entrainment.
That broke stud was a blessing in disguise. Fire up that engine with a broke inner valve spring and you drop a valve and have major repairs.
no doubt it would have been costly in the long run
BIG chief... Much respect to you... Always rooting for u man.... 💪💪💪💪💪💪💪💪💪💪💪💪
I would definitely pull the engine hone it bearing it have the block decked and ringed heads checked and decked if need be just have it all good to go and you know what you have
Another great video. You know whats cool, videos where people are turning wrenches and making passes and not just hating on people starting more drama about other people. It's really cool that you folks are focusing on content that is focused on what we all love, THE CARS, not bullshit. Thank You!!!! Glad the headstud was also exposed and a good old pair of Knipex alligator pliers was all that was needed. If you know you know about the alligator pliers lol.
So when running methonal or alcohol..you should run it on gas if ur going to park for a while so u don't get the moisture and rust ..I would also recommend pulling the push rods
whats weird is this engine has always been on gasoline and it looked like that lol.....my engine however is on methanol/nitro and clean as a whistle and ive never ran gas thru it since 2017 when we built the car....i dont get it either
Love my Knipex channel locks! Use them every single day! Glad that stud had broke above the surface!
love watching you guys work forget reaper he is sour grapes he is couple bricks short of a load he blames every body but himself for getting his car removed off the list
pretty much. he basically made his channel just to bitch at everyone.
Glad to see you guys are back. Now we get to see the time and sweat it takes to get these cars ready.
Jackie I love the content and editing, so I don't want this to seem like I'm bitching. 😅 Could you turn the music down when it's overlayed into the video. That's all! Y'all be safe tonight! We got some boomers rolling in tonight! 😃
of course! i try to keep it pretty steady but i will make it lower next time!
@@MidwestStreetCarsAuto it may be magnified on my end, since I watch it on a television, and not my phone. 😅😂
I thought the music was just fine! Great selection and taste Jackie!
@@AtomicPunx the music was rockin i loved it 💪
@@MidwestStreetCarsAuto it was a bit loud. Love y’all, hope things get better for you guys
Listener #15. Loving seeing this and hearing some real talk again. While No Shawn, still feels like Tuesday is back!! Keep it up.
Actually got lucky the head bolt was broke… you wouldn’t have never known about all the other issues. Glad you all got it fixed
so true....this deal would have been short lived had she ran it....and would have cost her alot more money and time in the long run
Y’all make a good couple. Keep up the awesome work and videos guys and gals. Looking forward to them all.
No comments on the truth ??? Of what happened ???? Reaper told all !
Amazing how munch chief fell in Love with jackie's NOS orphan baby 🥂👍😊
you should do a show with all the fastest small tire guys across the country, it would be just as successful as all the other shows, people are sick of the big tire shit,its unrealistic to most street racers, a small tire show would be a endless supply of competition and contient.
It's funny that murder nova and reaper both have said that the next season of the 405 without chief will be exactly that. Small tire out of town racing. Guess we'll have to wait and see
@@chrisosborne3679 maybe if he raced against small tire, Reaper would actually be competitive.
The only problem with that is if you know chief you would know he likes big tires
@@waltercronin2644 literally just bought a small tire. Keep up please.
@@cammednslammed that’s jakies fun car not chiefs keep up
That head and block need more water moving between the center two cylinders. Common problem on Exhaust valves next to each other.
If you find a way to move faster it will help cooling the casting. The best benefit it you can increase cooling you will also keep those 4 cylinders from detonating FIRST.
You might need to add extra cooling holes 1/4 down from block deck between cylinders and also between chambers.
Remember always moving a solid column of water Faster WILL remove heat from castings.
Go to the front!!!!!