@@nicolassundholm6721 If it's true that he's going to remove the tint and place it inside, the dryer sheet will make it come off easier. It leaves it slick. Dryer sheets work great to remove love bugs from your car.
It's worth giving it a try. And when you do a great job you can use it to sell the service to your friends and people in your area. It's a great side hustle and you should give it ago.
@@knowledge5106_ i tint windows on the side. Jeeps are definitely on the easier side to tint since the glass is mostly flat. Could even tint your windshield too
@@Avvmedia wow! Yes I do love how square and how open my 98 Jeep Grand Cherokee ZJ is and the windows too. I really may try it. I've never tinted anything before.
Hey so I was wondering if you wouldn't mind with a few questions... 1. How does someone get into tinting? 2. How lucrative is it? 3. How long does it take to become a "good" tint man
There is alot he skipped and I want to see finished product not a quick swipe I promise it didn't all lay down like that I saw inside prep for the tint which means it will have all kinds of dirt and hair show later on
it’s either pay $600 to get it done right the first time, or spend half on the supplies your self and screw up 2 times before getting it perfect. and thanks to videos like this you may even be able to get it on your first or second try.
I just laughed so hard. 😂😂 you brought back a memory for me. 🤣. Me n my friend went on a road trip, and he had just got this crappy tint done? And when I tried to roll the window down- it came off and was flapping in the wind. And then it flew off. 🤣🤣🤣🤣🤣🤣
@@truckloadofrhymes1 hey dip ass he put it on the outside to cut and shape it and then put it back on the inside are you blind you definitely wouldn’t get my business with that attention to detail 😂 0/10
You're a very good teacher. Clear directions and then demonstration. I have no intention of doing any car windows but I am adding film to my kitchen window. This will help for sure.
Hell yea , I got my to front doors tinted & the dude was like yea the bubbles will go away after 2 days bullshit , I still got them been 2 months , I wasn't about to take it back to his dumb ass again either lol
@@assassinleaked9356 you can get ‘em out yourself. Take a sewing needle and something to flatten it out with. Get the bubbles as small as possible so the air is as dense as possible in the bubble and pop it in the middle then flatten it down and it’ll look perfect. I tinted my own windows this is how I got my bubbles out.
Fantastic learning videos! You waste no time. You never make it about you. Two things are obvious to me; you truly want others to succeed, and you are a pro! Thanks!
This dude really just tinted that window like nothing while making a video. Not only are his tinting skills on point he is also an amazing teacher. Makes me want to tint my windows like the good old days.
Well, tinting is done on the inside of the vehicle, not that easy then. He is only shrinking the tint on the outside, after that you have to peel it off and install it inside without touching the upholstery, panels, headliner, etc. That's the hard part.
@@Morpheux1 oh really that's what he was doing? I was confused why he did all that outside the window and then showed it working perfectly inside... yeaaaa no, I've messed with enough vinyl to know I'd be bad at that LMAO it would be sticking to everything within five seconds of me peeling it off to move it haha
As someone who's always tinted his own truck windows thank you for showing me how to properly tint a rear window! The bubbles due to the curve is what's kept me from doing my car windows
I think i saw some of your videos when i removed tint and put new tint on a year or so ago and they were some of the most useful videos. Thanks for posting these.
FUCK I will have have another crack on the weekend. Despite plenty of videos I went through a few mtrs just trying to do the back window, ended up rage quitting. haha. I hate being shit at things and feeling defeated!
Don't feel bad man, this is HARD. I painted my car myself, pretty much came out perfectly the first time. I also vinyl wrapped a car for the first time, and it was fine. But rear window tint? I failed multiple times.
I'm the same way bro, wen I first started I used to get so frustrated because I wasn't picking it up as fast as I do most things but u just gotta practice and you'll get it
The more curvature on the glass the harder it is to shrink. A buddy of mine used to create more fingers by pushing film together seemed to work well for him. But he always said some vehicles are just impossible like the VW buggie.
Sometimes you just have to rage quit then come back to it, dont give up. Usually after i walk away from something i come back to it calm and finish the job like it was nothing.
I remember this well from my days in the tint shop. One of the first things I learned. I can spot a bullshit tint a mile away, if they’ve cut around the third brake light, if they didn’t do a 3M pad over the ceramic lettering or defroster lines or dot matrix it’s easy to see. If they use a machine to pattern everything out and think that means they don’t have manual trimming to do, walk away.
Im good at a lot of things but tint and wrapping I can't seem to figure out. Seems to be so easy and it isn't at all. There's tricks to everything. Good job.
Just more practice that's all it takes, but it can be expensive that's the only downside if you messed things up. But if you're willing to spend some money and time on it you can get really really good at it and make some 💰💰💰💰
@milkman man the beginning part of the video is just an example showing what happens when you don't shrink it When he rolls it out on the exterior of the glass it's a new piece of film he's starting with
This is similar to detailing/washing car. It looks so satisfying and easy to do. So it got me pumped up to start doin myself. And OO BOY I detail one rim and my back just gave up.
Actually, having the defroster on helps with the glue adhering to the window. Very useful for vehicles that have a lot of tension on the tint based on glass curvature. Also, use a clay bar to clean the backglass to remove contaminants from the defroster lines prior to laying your film.
I grew up with auto maintenance since my family has a whole business of it and I learned how to tint a car. My sister even tint her own car one day in our driveway
Dang... it's crazy how easier my life would've been if I just always had a TH-cam video showing me how to do stuff... my back window looks like @$$ with bubbles, hair stuck on it & everything. It was my 2nd attempt & I went through so much trouble I just said "screw it, good enough" since I only wanted it to keep the sun out of my toddler daughter's eyes
Are you and 14 other people actually that dumb? Wtf do you think he put that piece on the back for and cut it to fit? 😂😂😂 in case you still don’t understand… he used the same piece on the inside 🤯
Listen,,,,MY friend!!!! Window Tinting IS AN ART!!!!! Bless your heart that you've got that patience....EVERY TIME I've ever tried,,I've ALWAYS,,ALWAYS,,ALWAYS messed it up!!😢
i guessing ..but the softener in the sheets give the glass less "cling". Allows for a smooth surface where tearing and air pockets are sometimes problematic.
Paying someone who knows what they’re doing to tint your windows is always worth it. Yeah you could do it yourself, but at the same time it’s an annoying skill that you’re never going to use again or at least not for a long time. Coming from a guy whose tinted at least 7 of his cars himself as a teen.
This just made me so sad. I've been tryna build myself up to tint my windows for 2 years now and watching this makes me realize ima just give head and pay someone to do it. Ugh. Thanks 😂😢😅
We never did this in the 80s. We held the sheet up to the window and cut it with a razor blade (not a box cutter). We then sprayed the poop out of the window with Windex. We then peeled the clear part off and started from top using a credit card. Anything that was over We trimmed up with the razor blade. Our tint stayed on for years. 😂 I did my own windows for $19.00
When I was in my early 20's (40+ years ago) I worked at an Arizona screen company and did everything except tinting. There was another guy who did that and he would slice & cut the film on the outside of the window just like you do here, then install it inside. I'd have to say I prefer your method over his.
Window tint and tools -> 313tint.com
What is the purpose of the dryer sheet if I may ask
@@nicolassundholm6721 If it's true that he's going to remove the tint and place it inside, the dryer sheet will make it come off easier. It leaves it slick. Dryer sheets work great to remove love bugs from your car.
Dude I got bird shit on my screen can't get it off ,?
Did you actually just put tent on the outside of the car😂
My Ford tint from the factory has been bubbling lately
"heat the film, 'till it looks like beach waves headed into the shore"
- bob ross of tint
That's what I thought too 😂
Ha!
I was just thinking that xD
Happy little tint waves ヾ( ͝° ͜ʖ͡°)ノ♪
Hahahaha
Damn u making me feel like I could just do this to my own car
You def can a couple hours of TH-cam vids one or two failures and you'll have tinted windows
It's worth giving it a try. And when you do a great job you can use it to sell the service to your friends and people in your area. It's a great side hustle and you should give it ago.
I know made me feel the same way. Gotta start somewhere. I don’t know if I will actually do this though. I may give it a go in my Jeep though.
@@knowledge5106_ i tint windows on the side. Jeeps are definitely on the easier side to tint since the glass is mostly flat. Could even tint your windshield too
@@Avvmedia wow! Yes I do love how square and how open my 98 Jeep Grand Cherokee ZJ is and the windows too. I really may try it. I've never tinted anything before.
For those thinking about tinting yourself, the hard part begins when you start.
😂
I thought about on both my cars and said naaaaah fuck it. I’ll just spend the 270 to have a pro do it
Literally when you take it out the box…😂
i tried it and it looked my window was shattered😭
It’s not difficult, tedious and may vary results… I have mix match cuts on each window 😢
Just remember that the advice is to use heat, not to put the tint on the outside 😂
Wow I would have never know if you didn’t mention 😂😂
Well dang...that's important. Nice addition.
honestly I was confused about how it was bubbling inside the car when he applied it to the outside..
I mean I cant look outside of my car window but it looks gorgeous
Honestly I was thinking the same thing... Not that I would do it but other people would think about doing it.
As a pro tinter myself, appreciate this dude helping with advice for beginners.
Hey so I was wondering if you wouldn't mind with a few questions... 1. How does someone get into tinting? 2. How lucrative is it? 3. How long does it take to become a "good" tint man
@@ZachAttacc Ngl bub I don’t think that guys a tinter 😂 listens to a bunch of lady music and his @ is goldsniper, I’d seek advice elsewhere.
@@youseethesedogsinyourfront9540 peep his name now😂
You ain’t no pro clown
@@ZachAttacc
As a pro tinter ' I can tell you, don't ask anybody who claims to be a pro tinter for advice.
you’re to smooth with it bro, perfected craft
*too
There is alot he skipped and I want to see finished product not a quick swipe I promise it didn't all lay down like that I saw inside prep for the tint which means it will have all kinds of dirt and hair show later on
@@dannyshane4722isopropyl wipe down is a given
@Bob Sacamano do you seriously have to do that shit
@@zeusr6801 two*
my husband is studying to be an engineer… he tried to tint our ‘98 integra. he snapped the squeegee in half and cursed at the sky in japanese.
Lmao 💀💀💀💀💀 felt that
Understated comment
Plot twist: He's Mexican
@@benjaminthornburg6762🤣🤣
Engineers and hands on application, classic..(new age engineers)
The cool thing is that they show you step by step how to do it. The hard thing is they make it look so easy because they're so damn good at it 😂
I mean the cut to size step was a jumpcut to after it was already done which makes it look easy AF.
@@milnertechnologies9556he actually have full verion video
This was so well explained that if I had a tint roll I'd do this by myself. That's how confident this video made me
Shrinking the film is one thing, installing is another. But is definitely worth trying it though 👌🏼
I know right!
Only missing that you need to shrink it because the film is flat and window curved
That's why I pay professionals like you. You make it look too easy
Exactly! Some jobs are just worth letting skilled artists do!
yea seriously i actually do tints and this guy still makes it look effortless
And somehow I know intuitively that my efforts wouldn’t look like that no matter how hard I tried 😂😂😂
it’s either pay $600 to get it done right the first time, or spend half on the supplies your self and screw up 2 times before getting it perfect. and thanks to videos like this you may even be able to get it on your first or second try.
I just laughed so hard. 😂😂 you brought back a memory for me. 🤣. Me n my friend went on a road trip, and he had just got this crappy tint done? And when I tried to roll the window down- it came off and was flapping in the wind.
And then it flew off. 🤣🤣🤣🤣🤣🤣
Best tip to give. Back in the day we used to lay out the tint in the sun until it was ready.
Liar
When you’re really good at what you do it makes anyone think they can do it bravo man
@@truckloadofrhymes1 for all the happy customers there’s always an anger Karen that knows how to do someone else’s job better than them😂
@@truckloadofrhymes1 hey dip ass he put it on the outside to cut and shape it and then put it back on the inside are you blind you definitely wouldn’t get my business with that attention to detail 😂 0/10
@@truckloadofrhymes1 so you worked for a company with no reputation is what you're saying
@@truckloadofrhymes1 out of curiosity, why do you not want tint on the outside? are the elements too rough on it?
@@truckloadofrhymes1 thank you for the explanation, this makes sense
You're making this look way easier than it is.
Facts
I think the trick is to use a half folded corn tortilla to smooth it down
Aka any pro?
Yeah cause you do it inside the car
You're a very good teacher. Clear directions and then demonstration. I have no intention of doing any car windows but I am adding film to my kitchen window. This will help for sure.
never realized you could shrink tint the same way you do the winter insulation covering for homes! Thanks
It’s so rare to find a good tint guy
Hell yea , I got my to front doors tinted & the dude was like yea the bubbles will go away after 2 days bullshit , I still got them been 2 months , I wasn't about to take it back to his dumb ass again either lol
@@assassinleaked9356 you can get ‘em out yourself. Take a sewing needle and something to flatten it out with. Get the bubbles as small as possible so the air is as dense as possible in the bubble and pop it in the middle then flatten it down and it’ll look perfect. I tinted my own windows this is how I got my bubbles out.
It's hard to find anybody that's a specialist in anything these days
@@assassinleaked9356 just goto a shop & pay the 220-300 for all the windows tinted its not hard
@@BonBon770 😂😂 specially mechanics . RARE
Fantastic learning videos! You waste no time. You never make it about you. Two things are obvious to me; you truly want others to succeed, and you are a pro! Thanks!
This dude really just tinted that window like nothing while making a video. Not only are his tinting skills on point he is also an amazing teacher. Makes me want to tint my windows like the good old days.
Editing videos like this is often a specialized talent. Content creators such as this one are known for having editors to handle video making.
Lol what does editing a video have to do with recording a video while doing something else?
Well, tinting is done on the inside of the vehicle, not that easy then. He is only shrinking the tint on the outside, after that you have to peel it off and install it inside without touching the upholstery, panels, headliner, etc. That's the hard part.
@@Morpheux1 oh really that's what he was doing? I was confused why he did all that outside the window and then showed it working perfectly inside... yeaaaa no, I've messed with enough vinyl to know I'd be bad at that LMAO it would be sticking to everything within five seconds of me peeling it off to move it haha
Who says “on point” anymore? That sh/t was never cool. Do you live in Nebraska or Kansas. Behind much?
As someone who's always tinted his own truck windows thank you for showing me how to properly tint a rear window! The bubbles due to the curve is what's kept me from doing my car windows
You guys are absolutely incredible. Pure magic as far as I'm concerned.
So many crappy tint jobs in my area. They need to see this.
I feel like i need to hore these huys to put my phone screen protector on😂😂😂
I think i saw some of your videos when i removed tint and put new tint on a year or so ago and they were some of the most useful videos. Thanks for posting these.
FUCK I will have have another crack on the weekend. Despite plenty of videos I went through a few mtrs just trying to do the back window, ended up rage quitting. haha. I hate being shit at things and feeling defeated!
Don't feel bad man, this is HARD. I painted my car myself, pretty much came out perfectly the first time. I also vinyl wrapped a car for the first time, and it was fine. But rear window tint? I failed multiple times.
I'm the same way bro, wen I first started I used to get so frustrated because I wasn't picking it up as fast as I do most things but u just gotta practice and you'll get it
The more curvature on the glass the harder it is to shrink. A buddy of mine used to create more fingers by pushing film together seemed to work well for him. But he always said some vehicles are just impossible like the VW buggie.
Sometimes you just have to rage quit then come back to it, dont give up. Usually after i walk away from something i come back to it calm and finish the job like it was nothing.
Backs definitely the hardest imo. Door windows are nice and flat. The little triangle windows are a pain for me too
I remember this well from my days in the tint shop. One of the first things I learned.
I can spot a bullshit tint a mile away, if they’ve cut around the third brake light, if they didn’t do a 3M pad over the ceramic lettering or defroster lines or dot matrix it’s easy to see.
If they use a machine to pattern everything out and think that means they don’t have manual trimming to do, walk away.
Smooth. You made it look so fantastically easy. Ugh.
It's like listening to the Bob Ross of tint.
Underrated comment
Im good at a lot of things but tint and wrapping I can't seem to figure out. Seems to be so easy and it isn't at all. There's tricks to everything. Good job.
Just more practice that's all it takes, but it can be expensive that's the only downside if you messed things up. But if you're willing to spend some money and time on it you can get really really good at it and make some 💰💰💰💰
I swear you can learn absolutely EVERYTHING on TH-cam. I’m never going to need this but this is invaluable to somebody trying to go into this field.
He is a legend I've watched all your videos over the years and you really helped me a lot I can't say how much I appreciate your content
This is legit the best video I've seen explaining how to shrink tint. Thank you for the info!!
ya but why did he do the inside then switch to outside?
@milkman man the beginning part of the video is just an example showing what happens when you don't shrink it
When he rolls it out on the exterior of the glass it's a new piece of film he's starting with
Excellent video. I am ready to learn how to do this to my car.
It's worth learning. And it would be great advertising. You could make good money if you want a side hustle.
This is similar to detailing/washing car. It looks so satisfying and easy to do. So it got me pumped up to start doin myself. And OO BOY I detail one rim and my back just gave up.
You're the reason why I was able to tint My car I'm grateful
Best instructional video I’ve seen on back window tint
Keeping this in my back pocket for when I do my back window tint again
I've been tinting for 34 yrs, but watching someone else tint is so satisfying.
If this video helps you out to make money. Give a little love. This guy's always put in good videos For free
I used to work at a tint shop and I never saw anyone NOT use a heat gun or a propane torch.
I know where you're coming from
I like how he squeegee the tint differently in the first sample then completely squeegeed the 2nd tint sample to completion to remove the wrinkles.
Car owner turns on rear defrost and immediately destroys tint
Actually, having the defroster on helps with the glue adhering to the window. Very useful for vehicles that have a lot of tension on the tint based on glass curvature. Also, use a clay bar to clean the backglass to remove contaminants from the defroster lines prior to laying your film.
Wow great tips.
But I have to ask What does the dryer sheet do?
Effortlessly picks up any dirt/debris on the glass
@@fr3shSwag thanks for the info 👍
Great tips, but I’d love to see you do it this fast and easyfrom inside the back seat of that car like the rest of us would have lol
The idea is to shrink it outside, then peel it of and apply it inside.
"Beach waves headed to the shore."
Man got me all emotional and in my feels over tinting
I grew up with auto maintenance since my family has a whole business of it and I learned how to tint a car. My sister even tint her own car one day in our driveway
Dang... it's crazy how easier my life would've been if I just always had a TH-cam video showing me how to do stuff... my back window looks like @$$ with bubbles, hair stuck on it & everything. It was my 2nd attempt & I went through so much trouble I just said "screw it, good enough" since I only wanted it to keep the sun out of my toddler daughter's eyes
Might have to go to this guy for those 3m tints
Looks like bros smoothing it out with a taco lmfao😂
instructions unclear ended up replacing the whole window glass
Dude driving at night: "I can't see shit outta this fucking thing"
😂☠️ why did I read that in the voice too
Actually with how many led headlights there are that are brighter than goddamn stadium lights this might actually make nighttime driving easier
I can't even properly put on a screen protector, there's no way in hell am I going to be able to put a tinted film on my car windows lmao
Ditto
That “beach waves headed to the shore” analogy was actually kinda nice lol. Sounded like some imagery you’d read in a novel.
You make that look easy, back windows are the hardest, especially if U learnt how to do it watching utube 😂
I hope he used cheap Walmart tint for that 1st demonstration.
Per foot the Walmart tint is actually expensive
Are you and 14 other people actually that dumb? Wtf do you think he put that piece on the back for and cut it to fit? 😂😂😂 in case you still don’t understand… he used the same piece on the inside 🤯
nah he can heat it from inside and it flatten like normal but high chance the tint will leave mark(folded)
Damn homie finna take two business days just to put on a whole tint on a car
Listen,,,,MY friend!!!! Window Tinting IS AN ART!!!!! Bless your heart that you've got that patience....EVERY TIME I've ever tried,,I've ALWAYS,,ALWAYS,,ALWAYS messed it up!!😢
I could just be super tired but this is so soothing to me😂
What does the dryer sheet do?
Takes the static out doesn’t stick to cling to your hands
i guessing ..but the softener in the sheets give the glass less "cling".
Allows for a smooth surface where tearing and air pockets are sometimes problematic.
Definitely made that look invitingly easy!
I have a feeling…that this guy is good at anything he puts his mind to
Paying someone who knows what they’re doing to tint your windows is always worth it. Yeah you could do it yourself, but at the same time it’s an annoying skill that you’re never going to use again or at least not for a long time. Coming from a guy whose tinted at least 7 of his cars himself as a teen.
Ever wonder why your glass seems kinda blurry after a tint job? Now you know
Probably be cause the cheap shop you used didn’t clean the exterior of the glass afterwards😂 or crappy adhesive which means crappy film.
A guy with 20 years experience sure makes it look easy.
I like how he added the headed into shore 😂😂
Cool! Love learning how stuff is supposed to be done! Thank you!
Oh snap! That’s really good advice. Thanks man!
I watched this twice I feel like I'm utube certified now
I have no need to do this, but it's so satisfying to watch all the same.
Los Angeles shops need ro learn this. Tint shops out here suck!
Thank you so much bro. You have no idea the money ima save alone. And I can help others for a price lol this man upgraded some of us
I saw so many cars in raleigh with massive bubbles on their window that I actually began to think it was some bizarre trend
When bill Hader start tinting windows 😂😂
Wow thank you bro for you generous heart and taking your valuable time to teach os how to do that expensive job to our cars, God bless you 👍👍
This just made me so sad. I've been tryna build myself up to tint my windows for 2 years now and watching this makes me realize ima just give head and pay someone to do it. Ugh. Thanks 😂😢😅
Nice work! You make this seem much easier than it is!
I can always appreciate someone who takes pride in their work 👍
Exactly...geeesh...thats old school Award Winning Technique....
thanks for explaining what the dryer sheets do
We never did this in the 80s. We held the sheet up to the window and cut it with a razor blade (not a box cutter). We then sprayed the poop out of the window with Windex. We then peeled the clear part off and started from top using a credit card. Anything that was over We trimmed up with the razor blade. Our tint stayed on for years. 😂 I did my own windows for $19.00
That one little bubble at the end when he say " it will lay flat ln the inside" lol.
I'm 57 and have been tinting since I was 22. I approve everything in this video..
Life advice. If someone ever makes something look super easy. It’s because it’s super hard and have spent years mastering it
Well, not only can I wrap a car after watching these shorts, I can do back window tint as well. 😂😂
I drove a tinted car at night once and was like "am i blind? How tf do you see anything around you?"
One of the local pre 2008 detroit masters, i take it 🫡
You made this look easy af!
This guy is very skilled at this work -
These are one of those things I will always be happy getting someone ELSE to do.
I watched the whole thing as if im gonna tint my back window😂
You had me worried for a second. Like I KNEW tint goes in the inside…. Or does it. It does. Thank you for the tip!
This guy is the best I swear best teacher I been practicing watching all he’s vid 😂
I thought it was a man in a speedo, jumping up and down on a trampoline at first 😂💀
I now have this feeling I could totally tint my own vehicles windows...and I ain't even got one.😅😂
I’m learning this now and it’s a lot harder than it looks
It’s videos like these that make me believe I can tint my own windows and wrap my car. 💀
Instructions unclear, melted a hole in the tint
When I was in my early 20's (40+ years ago) I worked at an Arizona screen company and did everything except tinting. There was another guy who did that and he would slice & cut the film on the outside of the window just like you do here, then install it inside. I'd have to say I prefer your method over his.
This reminds me of when I was putting a sticker cover over my 3DS and had to use a hairdryer
i stumbled upon this short and for demo reason i thought his arm at the start was a baby bouncing up and down