How to Remove Cylinder from Key-in-Knob | Mr. Locksmith™ Video
ฝัง
- เผยแพร่เมื่อ 3 ม.ค. 2019
- Visit our web store at www.amazon.com/shop/mr.locksmith
How to Remove Cylinder from Key-in-Knob | Mr. Locksmith™ Video
For further information go to mrlocksmithtraining.com/
I have found that one of the problematic locks to rekey for beginner locksmiths in Key-in-Knobs. The main problem is removing the knob from the lock so you can rekey the cylinder. This videos and other videos on the Channel will help the beginning locksmith or help a locksmith or is trying to rekey a Key-in-Knob lock they are unfamilar with.
Visit my website for On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners,
Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous "Dumb Key Force Tool" that opens Smart Key locks in seconds go to Mr. Locksmith Training mrlocksmithtraining.com/
For Locksmith Franchise and Licensing Opportunities go to mrlocksmith.com/locksmithfranc...
Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.
mrlocksmithtraining.com/about-...
![[HIGHLIGHT] หมีLIVEปะ? | EP.171 เห็นแต่ในจอ วันนี้มาต้องขอคารวะ](http://i.ytimg.com/vi/gPWLxa0e_Z8/mqdefault.jpg)
Awesome! You are the only one on internet who explained the fix from the key knob rather than pin knob (other side of door). I had accidentally opened the key knob and was struggling since 2 days to put it back.. went to 2 locksmith who said I need to buy a new lock.. but here we are.. I’ve fixed it thanks to your video.. thanks
Great video. Got mine apart in 1 minute with your video help. Thank you.
Hey Terry, my name in Nicholas Grabowski im a 2nd generation Locksmith in Fort Wayne, Indiana....i think you are probably the best channel on TH-cam for Locksmiths. That being said it would be great to have any training on here for KABA or ASSA. Anything high security or even videos on vehicles without pulling key codes (such as lishis or accu readers) but its understandable if you save that for classes or even videos to release. By the way your picking videos on commercial/residential tremendously helped me so i thank you for that alone much less this channel
Thank you sir - locksmith appreciated that I brought the cylinders rather than the whole units for him to disassemble to re-key - all credits to you!
Harmonized Health You will be a better lock picker :-)
I started doing this in the mid 90s when the retaining clip poked out the side of the knob, so was visible. Was much easier to do then. Took a bit of work/practice to get the hang of newer knobs.
I can't wait to receive my Schlage D Series knob
I'm going to put a Medeco original in it
Mr. Locksmith, is there some where I can purchase a real safe and keyed entry doorknobs for my home? Please help.. I’ve been watching your videos and it’s kind of disturbing?
removing a kwikset knob cylinder from the lock with out removing it from the door. take an old key you have laying around and file or cut off the inside straight pieces from the bow you now have a hole you can put a hefty screw driver into. then file 2 cuts of the biting straight so you make what is called a lock out key. then insert it into the key way. now the key is jammed into the lock and will not slide back out. now inserting the screw driver and grabbing both ends, you should be able with a good pull remove the cylinder as it is held in place by 2 spring clips. then rekey and reinsert back into the lock.
Hello and thank you for the video. Do you have any instructions on how to remove the key barrel without the key? I've removed the whole lock from the door, I just can't seem to work out how to remove the keyed knob without the key.
Thanks, Josh
I'm having an issue where the key is turning past where it would normally stop to unlock the door, this is causing issues when I go to remove the key from the door it is locking the latch again on the inside. Any ideas what this could be?
Sounds like a design problem on the off-shore locks.
I usually just replace them with a good quality lock.
Can you describe the requirements of the tool you used to depress the retainer, so that a do-it-yourselfer can construct the tool cheaply (or find something around the house that will work)? Would a small screwdriver or a nail work okay? (I've been having trouble lately removing my key from the knob, so I'm guessing I need to replace the cylinder and key.)
I used a small nail on my knob without issue
I have a lock exactly like the top one; problem is its cylinder is broken. Can i only change the cylinder, and also where can i buy only the cylinder.
👌👍
I have a door handle that does not have that push button hole, I have no idea how to remove key cylinder
What’s the name of the tool ?
Any pointy awl will work, not too much pressure or force to remover.
What if the key is lost?
As Terry said, pick it, or do a complete disassembly. I've seen the instructions for doing the disassembly, it's not a simple task.
Pull the knob 🤣
How about instructions without the special tool that nobody has?