Traditional Motion Detection VS Dahua Smart Motion Detection

Motion detection is a great tool for analyzing a scene and sending alerts when motion occurs. But it’s prone to false alarms because let’s face it, there are a lot of things in a scene that can move: a tree branch blowing in the wind, a stray cat, things that aren’t truly a threat. Smart Motion Detection (SMD) is a new technology that mitigates false alarms and keeps your security operations running efficiently. Here’s how it works....

[@forextrial7001]

This was Funny and quite informative!! Nice way to learn

[@mouniraftas7620]

Nice video

[@maliharomen]

Dahua nvr support smd nvr 4216 can use general camera or must specific camera with smd also?

[@inba1035]

Which model ip camera model and nvr used in this case?

[@TheOmfgorz]

Can you have MD and SMD enabled at the same time ? Or should I disable MD if I want to use SMD and get phone notifications?

[@vncia73]

Uśmiałam się :D
ach te pająki :)

[@antonsamborskyi9978]

Pająki zawsze na czasie w monitoringu.

[@hichamth]

Thanks for this vidéo

[@antonsamborskyi9978]

It's my pleasure

[@cortaga57]

what model is the nvr

[@romi4sgk]

With enabled SMD motion caused by insects will also be recorded?

[@antonsamborskyi9978]

No. With SMD you can choose only "HUMAN" and "CAR".

[@romi4sgk]

@@antonsamborskyi9978 Есть NVR2108-I но он записывает и MD и SMD. Отключить обычный motion не получается, т.к. отключается SMD. Подскажите пожалуйста с кем можно переговорить по этому поводу. Местный суппорт неделю не может дать ответ

[@antonsamborskyi9978]

@@romi4sgk Но так и должно быть. Включаете обычную - классическую детекцию движения, и тогда камера реагирует на все, что движется (в рамках настроек). Если хотите включить SMD (базируется на AI), тогда функция SMD берёт все настройки с классической детекции движения. Так что последовательность такая, настраиваетe обычную MD и потом подключаете SMD.

[@sierrai600]

@@romi4sgk 2:00 here you have note: "SMD linkage configuration synchronizes with MD linkage configuration". And it's all.

[@romi4sgk]

@@antonsamborskyi9978 Супер, спасибо за оперативный ответ. Подскажите, где я могу найти инструкцию для правильной настройки данной функции. На GKS такого файла не нашел. У меня с включенным SMD пишет все подряд и людей и машины и любое другое движение.

[@cortaga57]

what serial number is it

[@Daniel_Sed]

SMD is way too buggy. It mostly depends how you position your camera. After camera is positioned, it is too late to change it's position.

[@maskermedismccons3090]

The ball always Dahua , right?

[@antonsamborskyi9978]

Yep.

[@DryUrEyesMate]

I'd suggest trying to sprint past the camera quickly and seeing how much ghosting trail it leaves behind.

[@TheOmfgorz]

What settings I should adjust to reduce ghosting ?

[@nayakacreativity3639]

​@@TheOmfgorzyou can reduce the denoising / noise reduction, at the image setting or camera OSD menu

[@quacktony]

Too hilarious. Nice proof of concept though.

[@antonsamborskyi9978]

Thank you.

[@junevicius]

@@antonsamborskyi9978 Hello Anton. What is the difference between SMD and IVS. What better to use for perimeter protection?

[@antonsamborskyi9978]

@@junevicius IVS use with parametric protection. (virtual lines, intrusion detection) also you can turn on objects filter and use AI functionality.
SMD - this is Smart Motion Detection, using with classic motion detection but SMD give you AI functionality (objects filer for human and cars).

[@yabinzhang5990]

you are funny Anton

[@shanemartyn1948]

Smd dosen't work will be set off with animals cats and dogs

[@JohnDoe-ed7vw]

he walked with his son to the tent and were not detected, only when he walked back and reach the camera that he was recognized as human, the AI used is really bad
Edit: forgot to mention the hand that was holding the tree, wasn't detected

[@shanemartyn1948]

Camera sensitivity is more than likely on default 5. Requires adjustment to maximise

[@JohnDoe-ed7vw]

@@shanemartyn1948 I'd have to see it can distinguish a half visible human first to believe it, it all depends on how good the data that was used to train AI and other things, if it is on default then it should have worked, I bought my cam in 2020 and it had no AI at all, just gets triggered on tree moving, can't tell cars from humans, turning on/off lights trigger it, flies trigger it (infra red is flies magnet), so much disappointed with what I got.

[@luigismoving8487]

@@JohnDoe-ed7vw me

[@JohnDoe-ed7vw]

@@luigismoving8487 ???

[@jeffcarter3683]

The faces look washed out with too much IR

[@arindampatranabish3016]

Ha ha ha what a comedy 🤣🤣