I was looking at this buggy after I seen it in gary’s channel killer off-road hobbies, I wanna get a 8th scale buggy for the outdoor track near my house, this seems like a pretty good buggy for sure it rips! 👍😎
dude....I got a roller off of ebay for ($100) shipped to my front door....I was truely amazed becuase it was listed for over a week until I pulled the trigger. The tires on it were new. it even came with a 120A speed passion esc.lmao It came with the body and everything too.... I dont have the programming card it only goes forward...but I used that for my MGT4.6 conversion.lmao..( that thing was almost new too) I also go an RC8 nitro for $100 too....complete with body and every.. i just washed it..it almost new...like the seller said...it was just dirty with some rusty screws....That why I didnt get the TT at first...I had the RC8 already.lmao Now I have both....dont know what rules or who;'s rules...but there's 4076 2250KV 120A esc in all my 1/8 buggy 4S 50C....the tires balloons. I install 18T-20T pinon....It;ll still pop wheelies on 19T 4s.lmao garry gets his shit for free.....i still have to pay for my toys..so I research and shop around..... but there was a kings; motor explorer roller listed for only $100 for over a week too....Well shit. it came in yesterday. The chassis hasnt even seen dirt.lmao...It took my 5 mins to install a motor and esc 20T pinon becuase it has smaller tires..... They all do around 50 plus mph on the 4S. The TT has the tallest tires of them all...around 115 mm... rc8 110mm KM 105 mm
yeeep! I just replaced all of that. I'll see how long it last.I'm going to try and post all of my repairs for the 8e aswell to help others with problems.thx
Das kann ich dir sagen, macht immer wieder riesig viel spass dem Ding die Sporen zu geben 😉. Ist aber trotzdem mit Vorsicht zu genießen! ! Danke fürs zuschauen und nochmal Glückwunsch zu deinen 💯Abonnenten
Chris you need to do a GPS speed test on that bad boy😱 I would love to see how fast it's going, am thinking 50 - 60 mph 😱 is it all stock ?? Fantastic video my friend yet again 👍😊👍
Thanks mate, I've already made a gps speedtest, but not recorded. the measurement showed 115Kmh / 71.4mph. not the fastest but enough for me😉😅 It's all stock, except for the pinion gear, I switched from 17T to 20T
Cool buggy, i am thinking to get one. How are the metal parts: diffs, diff cups dogbones and etc. holding all that power? Did you had some problems with it? It look very durable.
So far I have had no problems with the diffs. But I have to say that I mostly only drive onroad with 6s, for offroad bashen I drive it with 4s. I personally think that the price-performance ratio is great.
Hi erstmal, ....tolles Video, ich freue mich schon drauf wenn ich meinen 8e fahren kann. :-) Du hast weiter unten geschrieben: Original ist ein 17er drauf, ich hab auf 20 hochgeritzelt." Kannst du mir vielleicht einen Tipp geben, woher du das 20er Ritzel hast? Das wäre super! Danke
Erstmal vielen Dank für dein abo. 2. Wünsche ich dir schonmal im voraus viel Spaß mit dem 8e ( Preis-Leistung ist meiner Meinung nach überragend ) 3. Ist der 8e mit dem original 17er ritzel schon echt flott unterwegs aber ja ich weiß , man will immer mehr 😉😅 Woher ich das 20er habe weiß ich garnicht mehr genau .... Am besten wäre natürlich du schaust mal bei deinem Modellbau Shop deines Vertrauens vorbei oder du suchst mal im Netz. Wichtig dabei ist nur Stahl Motorritzel modul 1 , 20 Zähne, 5mm Welle Oder mal bei E... eingeben, da kannst du dir dann welche aussuchen. ... Hatte gerade welche von Robitronic gesehen. Hoffe ich konnte weiter helfen. #RC FAMILY
These batteries fits perfect If you need more information, I would have to measure again, but I believe that the dimensions can be found in the descriptions of the individual batteries. I hope I could help you
Unfortunately, the supply of spare parts from graupner or thunder Tiger is not very good. Here are a few sites where you could get some spare parts. www.modellbau-metz.com/rc-modellbau/autoersatzteile--und-tuningteile/thunder-tiger/bushmaster-serie/1 www.rc-race-shop.de/thunder-tiger-bush-master/ersatzteile Otherwise, maybe have a look at ebay to find the right one, although the selection is not very large I hope that will help you
@@chriscrashrc2982 thanks man I really appreciate the fast response on an older video. I've decided not to get this buggy it looks nice an all an is on sale right now for a little over 300 dollars. But the lack of parts an an no hop-ups killed it for me. I'm super rough with my stuff an need all the parts I can get😄. Thanks again. Decided to get the arrma typon 6s v4.
I use this for 6s hobbyking.com/de_de/basher-4000mah-6s-65c-hardcase-pack.html?___store=de_de And this for 4s hobbyking.com/de_de/turnigy-5000mah-4s1p-14-8v-20c-hardcase-pack-1.html?___store=de_de I hope it's helpful
@@chriscrashrc2982 Hey Man. Can you tell me please witch charger do you use for the 4S batteries ? Im strugguling do find a good one here in France for this. Thanks a lot !
Do you have any issues with the rear diff bevel gear stripping out? I've been going thru 3 so far. I even replaced the whole rear diff. see my video here to explain it th-cam.com/video/UHpbsM0aW1M/w-d-xo.html
in my 8e I had no diff problems so far but I had the same problem in the bushmaster desert buggy.I swapped the distance sleeve between the ball bearings, the shim disks and the cover, then everything was fine again. Maybe that could help you, but I'm not 100% sure. Good luck .
This is an awsomme buggy. So fast. Big thumbs up 👍👍👍👍
Thanks for watching
@RC Dre love to see how fast it's going on 6s 😱😱
Thunder Tiger buggy ran like a champ. 100% bashable!
Thanks for watching.
For that money, unbelievable !!
great video, liked it alot
Thanks alot 👍
I was looking at this buggy after I seen it in gary’s channel killer off-road hobbies, I wanna get a 8th scale buggy for the outdoor track near my house, this seems like a pretty good buggy for sure it rips! 👍😎
Thank you for watching. In terms of price / performance unbeatable. my opinion.
because you get a very robust, good, competitively priced buggy.
dude....I got a roller off of ebay for ($100) shipped to my front door....I was truely amazed becuase it was listed for over a week until I pulled the trigger.
The tires on it were new. it even came with a 120A speed passion esc.lmao
It came with the body and everything too....
I dont have the programming card it only goes forward...but I used that for my MGT4.6 conversion.lmao..( that thing was almost new too)
I also go an RC8 nitro for $100 too....complete with body and every..
i just washed it..it almost new...like the seller said...it was just dirty with some
rusty screws....That why I didnt get the TT at first...I had the RC8 already.lmao
Now I have both....dont know what rules or who;'s rules...but there's
4076 2250KV 120A esc in all my 1/8 buggy 4S 50C....the tires balloons.
I install 18T-20T pinon....It;ll still pop wheelies on 19T 4s.lmao
garry gets his shit for free.....i still have to pay for my toys..so I research
and shop around.....
but there was a kings; motor explorer roller
listed for only $100 for over a week too....Well shit. it came in yesterday.
The chassis hasnt even seen dirt.lmao...It took my 5 mins to install
a motor and esc 20T pinon becuase it has smaller tires.....
They all do around 50 plus mph on the 4S.
The TT has the tallest tires of them all...around 115 mm...
rc8 110mm
KM 105 mm
Love it😎
Thanks for watching, glad that you liked it (or love it 😉😎)
yeeep! I just replaced all of that. I'll see how long it last.I'm going to try and post all of my repairs for the 8e aswell to help others with problems.thx
great , good idea , thx you too
Nice truck and great video
Thanks mate, your comment was as spam 🤔
Glad you like it
Unglaublich wie das ""Teil"" mit 6 S vorwärts geht .Das sieht nach ner Menge Spass aus.
Das kann ich dir sagen, macht immer wieder riesig viel spass dem Ding die Sporen zu geben 😉. Ist aber trotzdem mit Vorsicht zu genießen! !
Danke fürs zuschauen und nochmal Glückwunsch zu deinen 💯Abonnenten
Cool video bro thing rips and looks like a good handling tough buggy 👌👍🤘
yeah bro that's right , i find this thing is an awesome beast! thanks for watching
This buggy a beast on 6s , I be ripping tires off , I’m gonna buy me another one just to have put back 😂
Chris you need to do a GPS speed test on that bad boy😱 I would love to see how fast it's going, am thinking 50 - 60 mph 😱 is it all stock ?? Fantastic video my friend yet again 👍😊👍
Thanks mate,
I've already made a gps speedtest, but not recorded.
the measurement showed 115Kmh / 71.4mph.
not the fastest but enough for me😉😅
It's all stock, except for the pinion gear, I switched from 17T to 20T
Wow that's fast mate 😱 that's a Amazing buggy 👍😊👍
Cool buggy, i am thinking to get one. How are the metal parts: diffs, diff cups dogbones and etc. holding all that power? Did you had some problems with it? It look very durable.
So far I have had no problems with the diffs. But I have to say that I mostly only drive onroad with 6s, for offroad bashen I drive it with 4s.
I personally think that the price-performance ratio is great.
@@chriscrashrc2982 thanks for the answer
Hi erstmal, ....tolles Video, ich freue mich schon drauf wenn ich meinen 8e fahren kann. :-) Du hast weiter unten geschrieben: Original ist ein 17er drauf, ich hab auf 20 hochgeritzelt."
Kannst du mir vielleicht einen Tipp geben, woher du das 20er Ritzel hast? Das wäre super! Danke
Erstmal vielen Dank für dein abo.
2. Wünsche ich dir schonmal im voraus viel Spaß mit dem 8e ( Preis-Leistung ist meiner Meinung nach überragend )
3. Ist der 8e mit dem original 17er ritzel schon echt flott unterwegs aber ja ich weiß , man will immer mehr 😉😅
Woher ich das 20er habe weiß ich garnicht mehr genau ....
Am besten wäre natürlich du schaust mal bei deinem Modellbau Shop deines Vertrauens vorbei oder du suchst mal im Netz.
Wichtig dabei ist nur Stahl Motorritzel modul 1 , 20 Zähne, 5mm Welle
Oder mal bei E... eingeben, da kannst du dir dann welche aussuchen. ... Hatte gerade welche von Robitronic gesehen.
Hoffe ich konnte weiter helfen.
#RC FAMILY
I would like to know the measurements of each battery thanks 🙏🙏
These batteries fits perfect
If you need more information, I would have to measure again, but I believe that the dimensions can be found in the descriptions of the individual batteries.
I hope I could help you
@@chriscrashrc2982 ok grazie 🙏🙏
Sono felice di poter aiutare
I know this video is over a year old but can you tell me some sites for part support on the Bushmaster 8e please thanks
Unfortunately, the supply of spare parts from graupner or thunder Tiger is not very good.
Here are a few sites where you could get some spare parts.
www.modellbau-metz.com/rc-modellbau/autoersatzteile--und-tuningteile/thunder-tiger/bushmaster-serie/1
www.rc-race-shop.de/thunder-tiger-bush-master/ersatzteile
Otherwise, maybe have a look at ebay to find the right one, although the selection is not very large
I hope that will help you
@@chriscrashrc2982 thanks man I really appreciate the fast response on an older video. I've decided not to get this buggy it looks nice an all an is on sale right now for a little over 300 dollars. But the lack of parts an an no hop-ups killed it for me. I'm super rough with my stuff an need all the parts I can get😄. Thanks again. Decided to get the arrma typon 6s v4.
Hey
krass das Teil.Hat der Buggy das original Ritzel verbaut ??
Original ist ein 17er drauf, ich hab auf 20 hochgeritzelt. Wie bei meinem bushmaster desert buggy, den fahr ich aber nur auf 4s.
Was this the RTR system?
Thanks for stopping by.
Yes it was the original 6s combo I'm only change the Servo
Can anyone tell me what size batteries fits this buggy exactly?
I have the 6s version btw!
I'll take a look and tell you later it was a long time ago
I use this for 6s hobbyking.com/de_de/basher-4000mah-6s-65c-hardcase-pack.html?___store=de_de
And this for 4s
hobbyking.com/de_de/turnigy-5000mah-4s1p-14-8v-20c-hardcase-pack-1.html?___store=de_de
I hope it's helpful
Thanks so much! ❤
I know this was a long time back lol I'm totally digging
Dirt on this guy but you really helped thanks again!
@@chriscrashrc2982 Hey Man. Can you tell me please witch charger do you use for the 4S batteries ? Im strugguling do find a good one here in France for this. Thanks a lot !
Do you have any issues with the rear diff bevel gear stripping out? I've been going thru 3 so far. I even replaced the whole rear diff. see my video here to explain it th-cam.com/video/UHpbsM0aW1M/w-d-xo.html
in my 8e I had no diff problems so far but I had the same problem in the bushmaster desert buggy.I swapped the distance sleeve between the ball bearings, the shim disks and the cover, then everything was fine again.
Maybe that could help you, but I'm not 100% sure.
Good luck .