Sir , I have seen civil engg. with 4-5 yrs of expirence are paid 25 - 30k Why civil engg. are paid very less inspite of working hard in harsh conditions ?
Sir, where the 4 no of bars in plinth beam was wrong. In the situation beam should be have the bottom of 3 bars atleast, because concrete weak in tension at a dia of 12 mm
So many mistakes in this beam... 1.Use more no of steel rods in bottom than top, atleast 3 rods at bottom and 2 on top 2.Stirrups should be placed at 6 inches each or 150mm to 200 mm 3.hooks should be bend at 90 degrees 4. Provide 1 feet development length at end of beam
Brick work below plinth totally wrong.plinth beam should on ground level comparing + PCC + Plinth beam+Brick work ( height as per site conditions)+ DPC
So beautiful 👍
Thank you sir!
From Philippines
You have good knowledge ,keep posting such vdos
Sir is it compulsory to provide stone masonry wall as support to plinth beams.
Things to b noted in construction of plinth beam over column footings?
Is the hook bend angle enough ? Is not it supposed to be 135 angle and 3” length ?
Thanks nice video, why is all the rods not going through the centre of the column? one rod is on the outside of the column
Sir, isn't it better to put stones or AAC blocks in plinth beam as they are stronger than normal bricks and water proof too ?
Yes you can do it
Which sand is good msand or river sand
Pls show right from foundation, columns with stone walls as shown in this video. If stone foundation is used, is it necessary to provide columns?
Sure complete foundation video comming soon👍
As your wish , Stability increases if you use columns.
Stirrups must be bent 135 degrees. No support at tension zone.
For basement below the plinth beam what should be the depth of excavation
It's suggested to go for atleast 5 feet below natural ground level, and it also depends on the type of soil and ground conditions.
How to calculate length of plinth beam.. please answer
Sar dhiraj wala bed ki making video jarur bnao
Sir I need plan Ground parking+ 1bhk
1st &2nd floor 2bhk+1bhk
3rd floor 1bhk 3 units
30*43 size 30 feet road South face
Pls help me
Contact us on 8147211144.
@@A2ZHomeGadgets ok
Sir , I have seen civil engg. with 4-5 yrs of expirence are paid 25 - 30k
Why civil engg. are paid very less inspite of working hard in harsh conditions ?
Sir, where the 4 no of bars in plinth beam was wrong. In the situation beam should be have the bottom of 3 bars atleast, because concrete weak in tension at a dia of 12 mm
Why two roda in between coloum
So many mistakes in this beam...
1.Use more no of steel rods in bottom than top, atleast 3 rods at bottom and 2 on top
2.Stirrups should be placed at 6 inches each or 150mm to 200 mm
3.hooks should be bend at 90 degrees
4. Provide 1 feet development length at end of beam
Yeah exactly
Please suggest me for g + 1 structure 20 × 40 construction
Sir plinth beam k niche kya bichange? Plastic/bricks? Mistri bole rehi hai. Plastic bichaiyenge
Column rods r bend why?
Sir ji app England pe nahi ho kripya hindi main hi bataye , sabko english acche se nahi ata, hindi main batayiye taki sabko samjh main ayee.
beam size for g+1
Anchorage is not provided properly...
Hamare yaha 4 x 16 and
4 12 Bar
The location of your construction site??? One more mistake is also there...
Where is 135 degree
Reply ok now
Brick work below plinth totally wrong.plinth beam should on ground level comparing + PCC + Plinth beam+Brick work ( height as per site conditions)+ DPC
Sir this totally worng sir
U don wrong
Right hai
Wrong
Right hai