My ProFX12v3+ just came out of the box this afternoon. I am fortunate to have watched this video before I've even plugged the unit in and turned it on. I have an acoustic duo with my wife and we've been using the classic Mackie DFX-12 for many years. I have two of them, and one had a channel fail during COVID and the backup had one fail just last week. This unit is an upgrade for us, and I hope to use it to its full capacity, and also branch out into some home recording for some original song projects. Thank you. I hope to absorb all this info and more from your other videos.
The first 4 minutes of this video has already instructed me so much more on how to use my base ProFX12v3 than any other video I have looked at on TH-cam over the last year and half of owning it.
THANK YOU! It's been so long since I have really mixed and I'm trying to get everything setup in my small home studio. After ordering this board I found you video and now I can't wait for it to arrive! Fantastic tutorial!
Wat een geweldige uitleg, alleen iemand met veel kennis kan dit zo doen. Veel mogelijkheden nu duidelijk, hartelijk dank voor het posten ...............❤
Same scenario here. I need the pfl, subgroup, Bluetooth and faders instead of knobs would be nice. The usb interface works surprisingly well and you won't spend hours trying to set it up - plug and play on my Mac.
Hello! My family and I enjoy watching your videos. I have a question if you don't mind. I have a berhringer 1204usb and I connect it to my smart phone with a USB cable from the mixer to the phone and I get good quality sound when I record music and down load it to TH-cam. However I'm not too satisfied with the picture size on the phone. I would like to use a more professional camera such as the canon EOS r50. My question to you is if I can connect the audio mixer to the canon camera as if I was using my smart phone and get the good stereo quality sound? Thank you I will appreciate your advice.
Hello. You mentioned setting up for streaming, but I did not see those instruction in your video. Do you have another video that covers adding the setup for attaching streaming devices.
Thank you for the excellent information you share. I have a question: what is the best way to connect my Pioneer FLX-10 controller to a Mackie ProFXv3 12 mixer? Thanks in advance, your content is always very helpful.
Great video. I have the ProFX16v3, but would love to upgrade to the V3+. They haven’t released the V3+ on the 16, 22 or 30 though. Also wondering if you can do an FX video like you did for the V3 but with the new GigFX+ effects and parameter options. Keep up with the great videos and thank you. 😊
Very informative video. Really appreciate your efforts in creating high quality videos. Just subbed your channel. Would you be able to create a detailed tutorial on tweaking each preset in GIG FX+ Effects Engine of ProFX12V3+, thank you.😊
Thank you very much for your video. It helped me to be able to record 2 channels. My only question is when I try to listen what I have recorded, should I connect the headphones to the mixer or to the Mac directly? I tried to listen from the headphones output of the mixer and I can’t hear anything. I was wondering if I am doing something wrong. Thanks again!
@@kettnercreativebrother one question to u .. sm58 with scarlet or podmic usb . For story telling and casual singing only vocals please reply i m too much confuse watch thousand videos or is there any other dynamic mic option from u then tell me please
when you connected the main speaker and the offsite recorder to their respective outputs does this automatically become a stereo signal or will the board treat it as two mono outputs?
Hello : I have a little mixer question for ya. I have a small mixer for my live performance percussion playing. The mixer has fx but once you choose an effect, that’s what goes to all the channels and you can only control how much or how little. I need to put multi fx on all channels and on some of the channels, I need different fx than the other channels. How can I achieve this ? Is there a live performing mixer that can do this or do I need to chain pedals together and connect to the aux send of the mixer ? ( I need a small mixer that can handle my 6 mic inputs.) I would love to be able to put a simple reverb on say…my congas, but then a flanged wilder reverb on my timbale. Those are the kind of things I’m trying to achieve while playing live. Thanks for your help !
im thinking of getting this for my local church setup... but i need to plug in an ipad into a snake which has xlr inputs only. How best to do this? Should I bypass the snake and go straight to the mixer with the usb connection? Can you get a cable at least 15m long for this?
I’ll be refering to the mixer in the video specifically, should be very similar for any other mixer. For the acoustic guitar you should use one of the 2 combo inputs (first 2 inputs) with hi-z enabled. 2 mics can be connected to any channel with xlr input, but preferrably in channels 2, 3 or 4 because they have a compressor knob. Keyboard should be connected to a stereo channel, so either 5/6, 7/8 or 9/10 using both line inputs on those channels for left and right outputs of your keyboard. Hope that helps :)
Hi, I have the profx12v3 and am struggling with routing to the usb interface and blend knob. I don’t have long before I can’t return it to the music store. What is the function of the control room/phones button? You don’t mention this, but I have got into a usb driver mess and don’t find it as easy to use as my current profx12v.
Could you explain why when I go from my rev5 master out rca to this mixer with 1/4 red & black I get no signal at all. But if I switch from XLR out my rev5 to mixer with XLR I get signal and sound ?
Loving my ProFX12v3+ so far. For some reason, although I'm following your "Bluetooth Setup" section steps identically, I cannot get any audio out either on PFL or main L-R output, and nothing on the monitor LEDs/levels, or headphones, after pairing is successful. Anyone have ideas what I can check? Thanks!
Mackie pro fx12v3+ How to save the currently used reverb effect group in mackie pro FX12V3+, so that it will be in this group next time you start the machine
Hi can i ask you why may MR4 edifier monitoring speaker sound high using unbalanced RCA to 3.5mm cable but after replace to balance TRS 1/4 male to male the sound was low why?
Можно ли использовать андроид для записи? Можно ли в режиме разговора по телефону при общении например через Телеграмм, выводить в разговор любой канал или главный или мониторный выход? Можно ли с этим пультом записывать качественное аудиовидео на андроид?
Can you please make a video on the Yamaha MG 12 XU teaching how to run an in ear monitoring mix where I can hear the metronome and backing tracks and other instruments without having the metronome come through the main speakers. What cables would I need to get? Where should I plug in my headphones so that the metronome is not only on the left but coming out on the left and right? I’m a worship leader and I know so many other worship leaders would appreciate an answer. Thank you for your videos!
You can use a group and connect it to the headphones or use the aux out, sending only the track with the metronome to group 1-2 and NOT the ST (buttons on the right of the fader) or just higher the volume of aux1 from the blue knob, then the main knob at the end of the blue knob line, and connect the headphones on the first left jack on the aux exits, you will hear the metronome in ear
Bluetooth is mono tho, i believe. My experience was that only one channel from my phone was being processed by the bluetooth receiver, and pumped into two channels of output. But the vocals were missing because it was an old school mix with vocals only in one channel. Can anyone confirm this?
Никому не рекомендую этот пульт. Блютуз у него двусторонний только при первом включении, выходной эквалайзер работает некорректно и мало влияет на настройки хоть какого-нибудь выхода, а интерфейс USB Tupe-C оказался пустышкой - даже тестер показал, что в нём нет жизни ни на вход на него при нажатой кнопке его канала, ни на выходе. Это гнездо просто не работает. Буду возвращать это чудо китайского производства.
I like my Behringer qx better the mackie effects sound bad and the mic preamps don’t even seem as good, thin sounding I get weird feedback off my Sennheiser EWD mics as well when I gain them up too much I don’t know not real happy with it I hate I have no slider and mute for my monitor And when I mute a mic it also mutes the monitor it seems
My ProFX12v3+ just came out of the box this afternoon. I am fortunate to have watched this video before I've even plugged the unit in and turned it on. I have an acoustic duo with my wife and we've been using the classic Mackie DFX-12 for many years. I have two of them, and one had a channel fail during COVID and the backup had one fail just last week. This unit is an upgrade for us, and I hope to use it to its full capacity, and also branch out into some home recording for some original song projects. Thank you. I hope to absorb all this info and more from your other videos.
Wellness Check for the community....haven't seen a video posted in months and or comments 😢 hoping all is well 🙏 ... great videos!!!
The first 4 minutes of this video has already instructed me so much more on how to use my base ProFX12v3 than any other video I have looked at on TH-cam over the last year and half of owning it.
What a great tutorial my friend. not only for this specific product but also general knowledge!
THANK YOU! It's been so long since I have really mixed and I'm trying to get everything setup in my small home studio. After ordering this board I found you video and now I can't wait for it to arrive! Fantastic tutorial!
Had ProFX 6 and got 12 + few days ago, and must say it is great as all Mackie Mixers are.
Thanks for video, as always perfect tutorial.👍
Super professional and easy to understand!
Love the video! Can you do a Mackie ProFX30v3 setup with all 30 channels using inserts etc while recording to a DAW? That would be awesome!
One of the bandmates has a Mackie 12V3, and I do sound for the band, your video very helpful when I visit his place for practice.
Awesome video! Thank you for that. Just bought that unit a couple days ago for solo acoustic gigs. This helps a ton
Wat een geweldige uitleg, alleen iemand met veel kennis kan dit zo doen. Veel mogelijkheden nu duidelijk, hartelijk dank voor het posten ...............❤
That was a great tutorial; excellent work!
very broad explanation.thank you.But one question.There is a channel with only 3.55 aux jack.Does it sound good?
Excellent video!
Great job Sir...please do one for Mackie Onyx 8..Thank you!
Thanks. I have the profx10v3 and considering upgrading for the more channels, faders, solo, and sub group
Same scenario here. I need the pfl, subgroup, Bluetooth and faders instead of knobs would be nice. The usb interface works surprisingly well and you won't spend hours trying to set it up - plug and play on my Mac.
What a great video, ecxelent tutorial.
I love this, learnt a lot - thnks Kettner
I wonder where to connect cables to my stage monitors? I see levels for monitors but don’t see an output specific to monitors? I have the FX 12
Usually control rm
Thank you! Great Job!
Hello! My family and I enjoy watching your videos. I have a question if you don't mind. I have a berhringer 1204usb and I connect it to my smart phone with a USB cable from the mixer to the phone and I get good quality sound when I record music and down load it to TH-cam. However I'm not too satisfied with the picture size on the phone. I would like to use a more professional camera such as the canon EOS r50. My question to you is if I can connect the audio mixer to the canon camera as if I was using my smart phone and get the good stereo quality sound? Thank you I will appreciate your advice.
Hello. You mentioned setting up for streaming, but I did not see those instruction in your video. Do you have another video that covers adding the setup for attaching streaming devices.
Can you show how to connect monitors speakers with this mixer.. and control their volume separately from the main outputs ?
As for the effects. Can you assign different effects for each channel or are you stuck with the effect chosen across all channels?
Mannnnn Perfect demonstration...Thanks
Thank you for the excellent information you share.
I have a question: what is the best way to connect my Pioneer FLX-10 controller to a Mackie ProFXv3 12 mixer?
Thanks in advance, your content is always very helpful.
Very informative. Thanks.
wow, lot of information I did not know... thanks
Great video. I have the ProFX16v3, but would love to upgrade to the V3+. They haven’t released the V3+ on the 16, 22 or 30 though.
Also wondering if you can do an FX video like you did for the V3 but with the new GigFX+ effects and parameter options. Keep up with the great videos and thank you. 😊
hello, could you please make video on the rode streamer x with the shure sm7b?
could you use sub 1-2 for a 2nd pair of monitor speakers?
Very informative video. Really appreciate your efforts in creating high quality videos. Just subbed your channel. Would you be able to create a detailed tutorial on tweaking each preset in GIG FX+ Effects Engine of ProFX12V3+, thank you.😊
Thank you very much for your video. It helped me to be able to record 2 channels. My only question is when I try to listen what I have recorded, should I connect the headphones to the mixer or to the Mac directly? I tried to listen from the headphones output of the mixer and I can’t hear anything. I was wondering if I am doing something wrong. Thanks again!
Hi. Thanks for the tutorial. It’s been very helpful. How and when do I use buttons 1-2and L-R buttons near main fader? Thanks
We talk about it in this video at 3:00 and 14:32, but I also have a video coming out to explain it.
@@kettnercreativebrother one question to u .. sm58 with scarlet or podmic usb . For story telling and casual singing only vocals please reply i m too much confuse watch thousand videos or is there any other dynamic mic option from u then tell me please
when you connected the main speaker and the offsite recorder to their respective outputs does this automatically become a stereo signal or will the board treat it as two mono outputs?
For sound quality is it better than a Yamaha mg10xuf?
Hello :
I have a little mixer question for ya.
I have a small mixer for my live performance percussion playing.
The mixer has fx but once you choose an effect, that’s what goes to all the channels and you can only control how much or how little.
I need to put multi fx on all channels and on some of the channels, I need different fx than the other channels.
How can I achieve this ?
Is there a live performing mixer that can do this or do I need to chain pedals together and connect to the aux send of the mixer ?
( I need a small mixer that can handle my 6 mic inputs.)
I would love to be able to put a simple reverb on say…my congas, but then a flanged wilder reverb on my timbale. Those are the kind of things I’m trying to achieve while playing live.
Thanks for your help !
Just got the 12V3+ and I’m a DJ. From the controller output L and R should I got to 3 and 4 XLR Inputs on the Mackie ?
Hi How to connect Mixer to DBX 286s and to the audio interface to PC or Laptop
im thinking of getting this for my local church setup... but i need to plug in an ipad into a snake which has xlr inputs only. How best to do this? Should I bypass the snake and go straight to the mixer with the usb connection? Can you get a cable at least 15m long for this?
Hi. How should I connect 2 mic, 1 keyboard and one acoustic electric guitar? Thanks
I’ll be refering to the mixer in the video specifically, should be very similar for any other mixer.
For the acoustic guitar you should use one of the 2 combo inputs (first 2 inputs) with hi-z enabled. 2 mics can be connected to any channel with xlr input, but preferrably in channels 2, 3 or 4 because they have a compressor knob. Keyboard should be connected to a stereo channel, so either 5/6, 7/8 or 9/10 using both line inputs on those channels for left and right outputs of your keyboard.
Hope that helps :)
@@veljkonikolic7788 Yes, very helpful. Thanks. Blessings
On the New FX + Is the USB mode "Loop Back" the same as Mixed Minus?
Can u suggest some best eq setting for male & female voice using 3 band eq for speech application like interview
hi there I don't get the clear voice when some delivery a speech? what is the best way to clear actual voice output?
Hi, I have the profx12v3 and am struggling with routing to the usb interface and blend knob. I don’t have long before I can’t return it to the music store. What is the function of the control room/phones button? You don’t mention this, but I have got into a usb driver mess and don’t find it as easy to use as my current profx12v.
I also came across the same problem do you know how to fix it?
hello may i ask , can the sub 1/2 be used as a subwoofer out?
Explain how to use the fxs
Could you explain why when I go from my rev5 master out rca to this mixer with 1/4 red & black I get no signal at all. But if I switch from XLR out my rev5 to mixer with XLR I get signal and sound ?
Loving my ProFX12v3+ so far. For some reason, although I'm following your "Bluetooth Setup" section steps identically, I cannot get any audio out either on PFL or main L-R output, and nothing on the monitor LEDs/levels, or headphones, after pairing is successful. Anyone have ideas what I can check? Thanks!
The volume on the device itself
@@Str8_Harley Already checked and tinkered with that, but thank you. Any other suggestions, I will definitely try!
Very informative. Thanks a lot! Could you do the same for A&H CQ-18T? :)
nice one sir . thanks
Mackie pro fx12v3+
How to save the currently used reverb effect group in mackie pro FX12V3+, so that it will be in this group next time you start the machine
Hi can i ask you why may MR4 edifier monitoring speaker sound high using unbalanced RCA to 3.5mm cable but after replace to balance TRS 1/4 male to male the sound was low why?
It has been awhile since you uploaded a video, I hope you are doing well. I also hope that you will be uploading new videos soon.
Можно ли использовать андроид для записи? Можно ли в режиме разговора по телефону при общении например через Телеграмм, выводить в разговор любой канал или главный или мониторный выход? Можно ли с этим пультом записывать качественное аудиовидео на андроид?
Can you connect a pioneer xdj rx3 controller on the Mackie profx12v3+
Yes, here's a video showing you how: th-cam.com/video/qOEwMu4Myh0/w-d-xo.html
Can you please make a video on the Yamaha MG 12 XU teaching how to run an in ear monitoring mix where I can hear the metronome and backing tracks and other instruments without having the metronome come through the main speakers. What cables would I need to get? Where should I plug in my headphones so that the metronome is not only on the left but coming out on the left and right? I’m a worship leader and I know so many other worship leaders would appreciate an answer. Thank you for your videos!
You can use a group and connect it to the headphones or use the aux out, sending only the track with the metronome to group 1-2 and NOT the ST (buttons on the right of the fader) or just higher the volume of aux1 from the blue knob, then the main knob at the end of the blue knob line, and connect the headphones on the first left jack on the aux exits, you will hear the metronome in ear
Is blend Knob working in the same way pan Knob is working
Hi. Blend use is different than pan knob which controls L-R pan mains only.
What is the volume setting in your speakers?
I had it turned down super low because I’m in the studio. But 99% of the time they’re set to 0dB/Line Level
Hello , pls help me how to set up karaoke on this model V3 plus . thanks
Turning down the high in eq reduces 's' sound??
Yes but it takes away brightness in the vocals as well
Bluetooth is mono tho, i believe. My experience was that only one channel from my phone was being processed by the bluetooth receiver, and pumped into two channels of output. But the vocals were missing because it was an old school mix with vocals only in one channel. Can anyone confirm this?
👍👍
Никому не рекомендую этот пульт. Блютуз у него двусторонний только при первом включении, выходной эквалайзер работает некорректно и мало влияет на настройки хоть какого-нибудь выхода, а интерфейс USB Tupe-C оказался пустышкой - даже тестер показал, что в нём нет жизни ни на вход на него при нажатой кнопке его канала, ни на выходе. Это гнездо просто не работает. Буду возвращать это чудо китайского производства.
I like my Behringer qx better the mackie effects sound bad and the mic preamps don’t even seem as good, thin sounding
I get weird feedback off my Sennheiser EWD mics as well when I gain them up too much
I don’t know not real happy with it
I hate I have no slider and mute for my monitor
And when I mute a mic it also mutes the monitor it seems