Hiya! My new boss recently bought this exact printer and cutter. And I have a question, hoping you can help me out 😉 It's with regards to using liquid lamination on the HP's vinyl prints: Our current/other printer is a Solvent based one (Roland), and we always laminate the vinyl prints (which will be used outdoors, for vehicle decals or signage) with a Clearshield Liquid lamination. (We mainly use the Poliprint vinyl brand) So now, we've tried applying this liquid lamination to vinyl prints with the HP, and realised, to our horror, that the lamination comes off the printed parts, when we use transfer paper or transfer tape when applying the vinyl. Do you have any expert advice on which type of lamination to use, when printing with the HP? It'll be highly appreciated 👍🏼 Any other tips as well. Thanks in advance 😊
you can do that but after a few cuts and depending the size and spacing it could cause problems with your cutting keeping the media from getting jammed because the pinch wheels need the media to move it
@@DaPrintHouseGo into Menu - System Setup - Calibrations - Cal. Media , then Set. Press the down arrow to cycle through the 3 values, OPOS, Yellow, and Black. Those are the number I need. Mine worked great when I was on Black barcodes in Flexi 22, but now it will only print yellow ones and my cutter has a very hard time reading them. Thanks, Craig
Awesome to see a video of yours. Been a while.
Man, I miss our HP Latex 365. We don't have any wide format machines are the new shop. Always nice when Da Print House uploads a new vid!
Hiya!
My new boss recently bought this exact printer and cutter.
And I have a question, hoping you can help me out 😉
It's with regards to using liquid lamination on the HP's vinyl prints:
Our current/other printer is a Solvent based one (Roland), and we always laminate the vinyl prints (which will be used outdoors, for vehicle decals or signage) with a Clearshield Liquid lamination. (We mainly use the Poliprint vinyl brand)
So now, we've tried applying this liquid lamination to vinyl prints with the HP, and realised, to our horror, that the lamination comes off the printed parts, when we use transfer paper or transfer tape when applying the vinyl.
Do you have any expert advice on which type of lamination to use, when printing with the HP?
It'll be highly appreciated 👍🏼
Any other tips as well.
Thanks in advance 😊
did you once mention you have used a continuous cut around individual stickers - so cutting blade does not lift - might of been on a BN-20 vid?
you can do that but after a few cuts and depending the size and spacing it could cause problems with your cutting keeping the media from getting jammed because the pinch wheels need the media to move it
I wish my barcode reader worked that good. Can you tell me your media calibration settings for the three colors?
The barcode color?
@@DaPrintHouseGo into Menu - System Setup - Calibrations - Cal. Media , then Set.
Press the down arrow to cycle through the 3 values, OPOS, Yellow, and Black. Those are the number I need.
Mine worked great when I was on Black barcodes in Flexi 22, but now it will only print yellow ones and my cutter has a very hard time reading them.
Thanks, Craig
@ILapTiming oh i wasnt sure u meant that I'll have to look when home
Thanks
Hello, what's a good machine thats lower in price that does print and cut like this machine?
roland bn 20 for all in one unless u want a label printer then a LX610 print cut but not UV protected without lam