ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- MK6 GTI footwell lights LED replacement, its a quick and easy way to change the standard yellow bulbs on your gti to some red, blue, green or any color you may want! Bought these 5 LED lights on ebay. Passenger side also has a red LED strip connected to its side for more lighting which I will also be adding to the drivers side.
Later I will be adding lights to the rear.
Lights bought on ebay:
www.ebay.com/it...
![Shareปลาวาฬ ส่งท้าย SS1 พาเปียโน ขึ้น Ferrari ก่อนไปขาย แลก Nissan l [Nickynachat]](http://i.ytimg.com/vi/KAknGkTNIvg/mqdefault.jpg)
Saved me so much time.. must watch if you are replacing these bulbs, thank you !!!!
Glad it helped you out, thanks for the good feedback 👍
@@esqu3l3to can you help me, the thing the light goes into in this video isn't holding my bulb anymore and the little metal pieces you bend outward to get the metal piece off broke, so you know what the piece the bulb goes into is called or where I can get a new one?
Message me on my fb page and I can send you a link or two for replacemenent units.
This is exactly what I needed to get the job done. Thank you!
+Ashley Gray - glad it helped you out.
This video is gold! Thank you so much
thanks! glad it helped you out
This video helped me so much!!! Thank you 👍🏻👍🏻👍🏻
Glad it helped you out
@ Stephen Bomba, sure I can. I will check out the bulb it uses to make sure I have one and I will make a video for it.
Thank you very much.
@ Stephen Bomba, Hey man, I will be doing the licence plate lights install in the next few days as I had my wisdom teeth removed recently and am still waiting for the lights to come in. Will post it as soon as I can for you.
Thanks bud I almost gave up on changing them lol my led bulbs didn't quite fit but I rigged it up
hey man, ya they do make these one bit weird to work on but glad you got yours to work!
Hi there
Nice car,I got CC 2009
Thanks! Ill check your out.
Are you still able to adjust the brightness in the MFI now that you're using LEDs?
Yes, you can still adjust the brightness. They work like the standard bulbs without issues.
Nice install vid
Thanks man!
Hi
Where did you take power for the strip light
Hello, I took the power for the strip directly from the light itself. When you remove the oem light, cut the led strip wire long enough to fold over then slide it into the connector for both negative and positive wires. Then you can push in the oem light, it will hold it in place while providing power to the led strip and work with dimming like the oem.
Hi ive done the passenger side but i dont have the right screwdriver for the driver side. Do you know what size it is to get the plastic tray covering the wires is?
You can use a butter knife, flat enough to bend the small tabs out. I used a small flat head one
wont work if you have the factory LEDs in the footwells only 9.8v
Thanks for the info. Are the factory one color or can you select different ones?
@@esqu3l3to the factory LEDS on the footwells are only 1 color there are about 6 or 8 fiber optic illumination strips on the door, the bottom door jam (not sure of the technical term) that glow red im not sure if its able to be changed color it was a customers car and i didnt play around with the settings
Ok so the ambient lighting. Not, I thought you could but I am not sure. Thats good to know tho.
where u get the led
I got them from an online store. You can get them from various online shops. If you need help message me on my FB page
I want to footwell light for car tell me where r u from
Would this be the same bulb as the Mk7 golf r??
Not sure but I can check
Where are you from u I need your help
+Koshy Thomas - I am in Canada. You can email me at chucho_301@hotmail.com
Done this and mine don’t work even old bulbs don’t now
did you try to flip the led over, remember some led are directional. Check you connections and fuse if needed. Unless you blew a fuse, even the oem lights should work.
What size and style are the footwelll bulbs?
+Andrew Gomez they Are wedge Bulbs, T10 style.
T10 red led? buying links please
And im mk6 jetta 2012. How to Foot well lights install?
The link is at the bottom of the description box. My gti came with oem footwell lights, I simply replaced the bulbs. You should be able to tell if your jetta has them, just have a look and then make sure on your MFI that they are turned up.
Esqu3l3to links 2pc. t10 red led buying?
Correct, two piece LED. You do however need to specify the color you want when you make the purchase.
Esqu3l3to ok. know the Led bulb size. 12v?
Yes they are 12v
what socket are those ? w5w ?
Yes w5w or t10
I check the ebay link, I have a 2014 MK6 Wolfsberg GTO and it's telling me it's not compatible. What model is your car? I thought all mk6 would generally be the same so I dunno how yours fit.
+Ron Tang hey man, mine is a 2011 mk6 gti. Do you happen to know the bulb type for yours? Some sites on ebay will say they are not compatible even tho they may be. Best thing to do is to search for the bulb type as I did. Some bulb numbers are interchangeable with others like the front park lights are T10 or w5w which are the same. I can't recall the type mine are but I will check again and they may be the same type for yours.
Thx if u can letme know what bulb type ill check what mine is
+Esqu3l3to t-45
+Esqu3l3to i found out what bulb i have, disregard the last message, its a Toshiba 12v3w wow E1 2pd 2pd and has 3t vertically on the side.
that is an odd bulb, where did you get the numbers from? If you can take a pic of the bulb and email it to me at esqueleto77@hotmail.ca as I think you will have a 5w5 bulb like mine does.
Do you have a link of where you bought the led's?
Leonardo Tovar yes I do, I will post it on the description.
+Esqu3l3to 👍🏽 thanks!!
No problem man
Can anyone help me please, I have LED strips under my dash and glove box and I'm connecting them to the fuse box but i cant find the right fuse to turn them on when i turn on my headlights. They come on when i turn on my car and stay on till the cars off. Any idea where that fuse would be?? Much appreciated!!
your best/easier solution would be to install a switch that you manually turn them on/off instead of splicing into your headlight harness. Do you have footwell lights? if you do you can tap into those instead so the LED strips will light up when you unlock your car and open your doors then turn off after you lock your door.
Esqu3l3to This is exactly what I want to do... Tie the led strip into factory footwell lights. On my footwell lights, which wire is positive and which is negative? Is it distinguished by color, or do I have to use a volt meter to check? Did u ground the negative wire to a bolt, or did u splice into both the positive and negative wires? Thank you!
I cannot recall which wire is which as I did not have to splice into the wires. Yes use a volt meter to find the positive wire. I have seen wirimg harnesses that piggy-back of the factory plug. Let me do some searching and see if I can find a link. If not you can just splice onto the harness.
Esqu3l3to Thank you for your help. A wiring harness would be even better...
+Esqu3l3to
Thanks for the video. Did you just solder the + and - onto the light bulb fixture? Min 3:35 is the part I am referring to.
If not how did you wire them?
+Mike Salapow you don't need to solder these lights in, they are wedge bulbs so you simply pull them out and push in the replacements. My gti came with the footwell lights already installed I simply changed the halogens to LED. If yours didn't come with factory lights you can still install them. Here is a link to one of my videos of my lancer.
th-cam.com/video/mFfCea-2kgo/w-d-xo.html
Thanks, I was referring to the LED Strip =)
+Mike Salapow hey man, sorry for the late reply but I just noticed your comment. I did not solder the wires, what I did was to connect them by first connecting the LED wires to the pins in the light assembly then sliding on the power connector. that way they stayed on without having to splice into the harness. hope that makes sense.
U call me ok 0