How to Replace Levolor Trim and Go Vertical Blind Wand Control Mechanisms

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ก.ค. 2024
  • Buy Levolor wand control mechanisms for Trim and Go vertical blinds: bit.ly/3tdVMrJ
    Learn how to replace wand control mechanisms in Levolor Trim and Go vertical blinds from Fix My Blinds.
    00:00 - Intro
    00:29 - Tools & parts you'll need
    00:37 - Repair Tips
    00:51 - Removing your broken mechanism
    02:42 - Installing your new mechanism
    04:57 - Replacing your wand
    05:29 - Testing your repair
    Visit Fix My Blinds for more blind parts, string, and instructions: bit.ly/3tbi4dN
    Visit our channel: / fixmyblinds
    Video ID: 381008
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    Copyright © Fix My Blinds Inc 2021 and Subsequent Years All rights reserved.
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 81

  • @SparkWorksnDesigns
    @SparkWorksnDesigns 5 วันที่ผ่านมา +1

    Love your teaching style! Even I got it!

  • @jerryschmidt4192
    @jerryschmidt4192 หลายเดือนก่อน +2

    Original Comment was in 2022. But, I Hit the Wrong Key and Deleted it. WELL DONE JOB. This is a GREAT Video. The one Thing you Missed was the Spring Clip on the Other End of the Rod to Keep the Last Blind on the End.

  • @t-bonet-bone713
    @t-bonet-bone713 2 ปีที่แล้ว +4

    It is wonderful to find this video of the exact product that I have, and the clear instructions to fix it!! I went straight to your web sight and bought the part. Great content with professionalism.

  • @spikebite785
    @spikebite785 9 หลายเดือนก่อน +2

    thank you so much for the video , couldn't even get any help from levolor , i bought my replacement part from your company

  • @civildissension
    @civildissension ปีที่แล้ว +1

    Nice. Found the part I needed on your website! It was buried in the description. Otherwise would've had no idea where to buy this thing. Thanks so much for posting a video about it. I just needed to know of a vendor.

  • @linan9290
    @linan9290 ปีที่แล้ว +1

    Thank you. One clip that just happens to be to close to the window post always gets caught. This time it actually won't turn back straight. Your video saved me a huge headache. Thanks again!

  • @traunerofh
    @traunerofh ปีที่แล้ว +2

    Easy to do, but I probably wouldn't have been able to without the video. Thank you.

  • @mitchgrossman7447
    @mitchgrossman7447 ปีที่แล้ว +1

    Huge help! My wand is now working again, thank you!

  • @scottstevens814
    @scottstevens814 2 ปีที่แล้ว +2

    This was great. This is exactly what I was looking for. Thanks!

  • @mjj817
    @mjj817 3 หลายเดือนก่อน +1

    Great video, thanks. Only trouble I had was getting the spacer strap into to the replacement part.

  • @Bllgl37
    @Bllgl37 ปีที่แล้ว +2

    Thank you. I found it real easy to follow your direction.

  • @guysevedz3581
    @guysevedz3581 2 ปีที่แล้ว +6

    Last week we bought the part from Fix My Blinds and the installation was just as easy as explained in this video. I even took a chance trying it with it still attached to the wall and I was done in I'd say 30 minutes, in no particular rush......

    • @guysevedz3581
      @guysevedz3581 ปีที่แล้ว

      Just bought two more controllers today, thank you.

  • @DebbieMartin-iu5hj
    @DebbieMartin-iu5hj 10 หลายเดือนก่อน +1

    Thank you so much for this vey helpful Visio. What a great service you are providing. I purchased the part from your site and now I am confident I can do the repair!!

  • @big_d4749
    @big_d4749 ปีที่แล้ว +1

    Thank you. Saved me tons of time fixing mine.

  • @joshuaking6631
    @joshuaking6631 ปีที่แล้ว +1

    Thanks so much for this video, it was exactly what I was looking for.

  • @JetUSA4815
    @JetUSA4815 4 หลายเดือนก่อน +2

    This was super helpful. Thank you!!

  • @fredericksullivan5762
    @fredericksullivan5762 2 ปีที่แล้ว +1

    Thanks for the video ! It was a big help!

  • @mandardeodhar400
    @mandardeodhar400 3 หลายเดือนก่อน +2

    Thanks for the video. It worked very well for me.👍

  • @patharlow766
    @patharlow766 ปีที่แล้ว +1

    Perfect. Thank you!

  • @vemce625
    @vemce625 2 ปีที่แล้ว +1

    A video on the initial setup of the trim and go blinds would be great, figured it out from the above video tho thanks

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว

      Thanks for the video idea! Glad to hear that you got your new blinds figured out.

  • @815donalduck
    @815donalduck ปีที่แล้ว +1

    I hate blinds! But you did an excellent RnR for the issue we are experiencing! 🙏 ➰

  • @MoMinor1
    @MoMinor1 3 หลายเดือนก่อน +2

    THANK YOU!!!!

  • @lindaager-yk4pi
    @lindaager-yk4pi ปีที่แล้ว +1

    Great video

  • @jerrysmission
    @jerrysmission 9 หลายเดือนก่อน +1

    Thank you. 👍🏽

  • @AndyRodriguez
    @AndyRodriguez 4 หลายเดือนก่อน +1

    thank you.

  • @rod78tube
    @rod78tube ปีที่แล้ว +1

    Good man!

  • @hoodlum2249
    @hoodlum2249 2 ปีที่แล้ว +1

    Nvm I see the link. Very helpful video!!

  • @nenaneno
    @nenaneno 5 วันที่ผ่านมา

    So this video about how to REPLACE to new Wand Control Mechanism than fixing the old one. I’m looking for how to fix it first.

    • @fixmyblinds
      @fixmyblinds  3 วันที่ผ่านมา

      Hi there, there's no way to repair the tilt mechanism. Once it's broken, the only fix is to replace it with a new one. You can find the part at this link: fixmyblinds.com/products/vertical-blind-tilt-mechanism-506

  • @lalithshorey
    @lalithshorey ปีที่แล้ว +1

    wow it helped

  • @wanderingsoul2909
    @wanderingsoul2909 2 ปีที่แล้ว

    Very good video ! I'm uncertain if I can remove/reinstall the bar from the window by myself without another person ?

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว

      Taking down a vertical blind by yourself can be difficult because it is typically at least six feet wide. Probably a good idea to ask a friend to help!

  • @renenetrosio7937
    @renenetrosio7937 2 ปีที่แล้ว +1

    Great

  • @montysprague7610
    @montysprague7610 2 ปีที่แล้ว

    This was helpful. Can you explain what the Vertical Blind Magnet Catch is for? It attaches itself to the Wand Control Mechanism and moves back and forth with it. But what does it do? Thanks!

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว

      Hi Monty, The magnet catch is to keep the blinds closed when they are fully covering the window. The tilt mechanism catches onto the magnet to keep the blinds in place.

  • @hoodlum2249
    @hoodlum2249 2 ปีที่แล้ว +1

    Where did you get the control mechanism?

  • @jedinielsen
    @jedinielsen ปีที่แล้ว

    Great video! I am unsure of the brand of my blinds. Is the part that part that you posted a link to specifically for Levolor, or is there a possibility it will work with other blinds?

    • @fixmyblinds
      @fixmyblinds  ปีที่แล้ว +1

      Hi Eric, the part in this video is for Levolor blinds. But, if your blinds don't have a brand shown on them, they could still be Levolor. If you're not sure which replacement part you need, feel free to email us some pictures of the part you need. Our email is service@fixmyblinds.com.

  • @Izmena34
    @Izmena34 2 ปีที่แล้ว

    Hi, Brian . I like your professionalism and way you fishing blinds . I have problem with mine , is it possible if i send u a video or picture of my problem and if u can, just gave me an advise if fixable. Thanks,

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว

      Hi Olga! Yes, you can email us at service@fixmyblinds.com. We are happy to take a look at your pictures and see what we can do to help!

  • @mcristinaurbina1294
    @mcristinaurbina1294 ปีที่แล้ว

    Just like in your video, my tilt/wand mechanism is extremely close to the first stem which happened to just break. Now I am unable to clip in the new stem because of how close the two are. Any suggestion on how to replace broken stem without taking the whole track down?

    • @fixmyblinds
      @fixmyblinds  ปีที่แล้ว

      Hi there, if you could email us a few pictures of your blinds where you need to snap in the new stem, we can give you some specific advice. Our email is service@fixmyblinds.com.

  • @napierdelticdiesel7909
    @napierdelticdiesel7909 2 ปีที่แล้ว

    What is the magnetic catch that slides along with the wand mechanism that stops half way when opening the blinds? What is its function and why does it stop half way (hits a small stopper screw mid-way)?

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว

      Hi there, the magnet catch keeps the blinds closed when the slats are totally covering the window. The tilt mechanism has a small metal plate on it and catches onto the magnet. It isn't designed to move back and forth. It stays on the end so that when the tilt mechanism can catch it. It was just moving around a bit during the video as we repaired the blind.

  • @tinkeringeekkissimmeefl4495
    @tinkeringeekkissimmeefl4495 2 ปีที่แล้ว

    Thanks for the great video. Just installed the Trim + Go vertical blind and found that one of the vertical rotating clip is not moving. There are a couple of clips moving at a different direction than the rest. Could you please make a video how to fix these issues? Thanks in advance.

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว +1

      If that is a brand new blind, I'd return it to the store. It sounds like it's defective as there is no way to realign the clips.

    • @tinkeringeekkissimmeefl4495
      @tinkeringeekkissimmeefl4495 2 ปีที่แล้ว +2

      @@fixmyblinds Thank you for your reply. It turns out that Levolor has a unique way of adjusting carrier orientation and I found it in their FAQs, with minor adjustment from their instructions. Here is the full excerpt from their site to share with the community:" Begin by positioning the mis-aligned vane(s) in the fully open position. Next, remove the misaligned vane from its clip, by gently pressing upwards and outwards until the vane releases from the clip. With a pair of pliers, grab the clip that previously held the vane and push it gently upwards until it snaps back into the headrail. Spin the wand until all vanes are in the fully opened position. Once that has occurred, grab your pliers and gently pull down on the clip so that the missing vane can be reattached to its clip." EXCEPTION: in my case for Trim + Go, I have to rotate the clip until the body is aligned with its holder, then using the pliers, push the pin upward. It will retract to the headrail. Then rotate the entire blind until all carriers are flat, then pull down the mis-aligned clip. After that, all will be aligned with each other.

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว +1

      Wow; those are great instructions! Thank you for sharing that information you found!

    • @tinkeringeekkissimmeefl4495
      @tinkeringeekkissimmeefl4495 2 ปีที่แล้ว +1

      @@fixmyblinds Glad to help! and again thanks for making the original video.

  • @gail6904
    @gail6904 ปีที่แล้ว

    hi BRIAN I broke some clips that snap in my square hole son top of vertical blinds..i found xtra clips but how in the heck do you remove or insert the plastic thin flat pieces..one has tabs on end like mushroom head and wont go into
    next new carrier pulley

    • @fixmyblinds
      @fixmyblinds  ปีที่แล้ว

      Hi Gail, I'm not sure which clips you mean. Would you please send some pictures of the parts you're trying to replace to our email? I'd love to give you any directions we may have. Our email is service@fixmyblinds.com.

  • @lleo9346
    @lleo9346 ปีที่แล้ว

    this video looks helpful, how we order these parts ?Home Depot? how to describe it while searching?

    • @fixmyblinds
      @fixmyblinds  ปีที่แล้ว

      You can order parts on our website at www.fixmyblinds.com.

  • @jimave
    @jimave 2 ปีที่แล้ว

    Question for you: I have vertical blinds and the thing that slides the blinds to the left and right is broken. I can slide them to the right so the blinds are collapsed but I can’t slide them back because the wand isn’t connected to the wand/title control. Do you have a video how to fix this?

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว

      Hi Jim, There could be a couple of different things broken on your verticals. Would you please email us some pictures of your broken blind and where the wand isn't connected any longer? Based on those pictures, we can let you know what is going on and if it can be repaired. Our email address is service@fixmyblinds.com.

    • @jimave
      @jimave 2 ปีที่แล้ว +1

      @@fixmyblinds I emailed it to you.

  • @joeinsocal
    @joeinsocal ปีที่แล้ว

    Is there a way to switch the orientation.
    I bought colored louvers.
    But the way it's set up when it's all the way open you just see the back side which is white.
    The only thing I can find is that the recommend a left to right opening.
    I have a right to left opening.

    • @fixmyblinds
      @fixmyblinds  ปีที่แล้ว

      Hi there; some blinds can be changed just by turning the headrail around and putting the control end of the headrail on your preferred side. But, not all work like that. If you'd like to see if you can do that, please email us a few pictures of your blinds. Our email is service@fixmyblinds.com.

  • @Welcome2us
    @Welcome2us ปีที่แล้ว

    Hi, My blind is not opening or closing, I have wand, I am not sure which piece I need to order. Also from where I can get this mechanism to replace it?

    • @fixmyblinds
      @fixmyblinds  ปีที่แล้ว

      Are the slats on your blinds not tilting opened and closed? If so, the tilt mechanism needs to be replaced. But, there are many different types of tilt mechanisms out there. Does your blind look just like the one in the video? Please email us some pictures of the tilt control in your blinds. We can let you know if we have the piece you need. Our email is service@fixmyblinds.com.
      The link to the tilt mechanism in this video is: fixmyblinds.com/products/vertical-blind-tilt-mechanism-506

  • @lindanack9407
    @lindanack9407 2 ปีที่แล้ว

    How do you remove the rail from the window

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว

      Hi Linda, This video and guide will show the basic steps for taking down a vertical blind: fixmyblinds.com/pages/how-to-remove-and-replace-a-vertical-blind.

  • @danielrush8804
    @danielrush8804 2 ปีที่แล้ว

    Does anyone know where to find the replacement part

    • @fixmyblinds
      @fixmyblinds  2 ปีที่แล้ว +1

      Hi Daniel, we sell the replacement parts in this video here: bit.ly/3tdVMrJ

  • @sfperalta
    @sfperalta 11 หลายเดือนก่อน

    Unfortunately I'm looking for a video specific to Levolor for replacing broken hanger-clips. I can't seem to figure out how to release the broken clip from its "car". All the videos I see that purport to show this are for other blind makers and the mechanical design is different from Levolor.

    • @fixmyblinds
      @fixmyblinds  11 หลายเดือนก่อน +1

      There's no way to remove the clip from the carrier it is attached to. Unfortunately, some blinds are made this way. You may be able to replace the whole carrier, but not just the clip. They only way I know to get parts is to purchase a new headrail at Lowes and use the parts it comes with.

    • @jentrezise6295
      @jentrezise6295 5 หลายเดือนก่อน

      ​@@fixmyblindsdo you have a video on how to replace several of the whole carriers? That's what I need to do as well as the wand control mechanism.

  • @djhigginz
    @djhigginz 8 หลายเดือนก่อน

    Why is the mechanism so close to the first blind slat? Won’t it hit when u try to close them?

    • @fixmyblinds
      @fixmyblinds  8 หลายเดือนก่อน

      Hi there; that's just the way that Levolor makes this particular headrail. Some verticals have the first slat attached very closely to the tilt mechanism. The wand may hit the slats when opening and closing the blinds.

  • @konaok1
    @konaok1 6 หลายเดือนก่อน +2

    Great Helpful Video! Could Levolor have made that part any cheaper or more vulnerable? When I installed the vertical blinds I just knew this part was doomed to failure. BIG THANKS!

  • @daniellebozella3995
    @daniellebozella3995 6 วันที่ผ่านมา

    Where can I get this mechanism? I went to Lowe’s and they wanted to sell the entire rail.

    • @fixmyblinds
      @fixmyblinds  5 วันที่ผ่านมา

      Hi! You can purchase it on our website at this link: fixmyblinds.com/products/vertical-blind-tilt-mechanism-506.

  • @GetAClueMarketingShow
    @GetAClueMarketingShow ปีที่แล้ว +1

    😢The problem with these wand controllers is how close they are to the 1st blind getting caught up into it and doesn’t hang correctly thus breaking it…Why does the first blind holder have to be attached to the wand controller?

    • @fixmyblinds
      @fixmyblinds  ปีที่แล้ว

      Hi there, If the first blind holder (carrier) wasn't attached to the wand controller, you wouldn't be able to use the wand to draw the blinds back across the window once they are opened.

  • @Welcome2us
    @Welcome2us ปีที่แล้ว

    I am not sure it is wand control mechanism?

  • @markreuter6929
    @markreuter6929 4 หลายเดือนก่อน

    Kinda defeats the purpose if I have to take it off I might as well just buy a new one.

    • @steveneal174
      @steveneal174 4 หลายเดือนก่อน +1

      Well Mr. Big bucks, go spend $100 on new one, I'm sure the company won't mind. The rest of us will spend $10.99 on a part. 😊

    • @markreuter6929
      @markreuter6929 4 หลายเดือนก่อน

      @@steveneal174 I already did, my time is worth more than that.

  • @bulldog9160
    @bulldog9160 6 หลายเดือนก่อน +1

    Great