Help please, I am running into an issue where sections on the board just refuse to etch, the etchant removes most of the parts but there are some areas that refuse to come off
Use 300 grid sandpaper so that the blue film adheres well. because when the roughness on the PCB is thin because you used thin sand paper, the Blue film will not stick even if your PCB is still very clean, you need to roughen it completely. use 300 grid paper.
Ano o paano po ninyo nagawa yung ganyang pag print ng layout baliktad yung walang copper island yung na pprint para kapag na expose sa uv led maiiwan yung pinaka mismong layout.
@@diyelectronics5375 sa thickness po ba? May dapat po akong iconsider? 1.4mm po kasi normal na thickness ng pcb, tas puro mga 1?? Thickness po yung mga laminator sa shoppee
Anu gamit mo sabon? Kasi kung hndi siya natunaw sa Sabon malamang over exposure ka sa UV light ibig sabihin lahat ng blue film is naging plastic na. Na manipis dahil sa over exposure try mo kayurin ang film matigas nayan dapat malambot payan after ng exposure
@@diyelectronics5375 Tide po ung gamit ko. 20 - 25 sec ko din po ineexpose sa uv light. natunaw na po ung film kaso parang di dumidikit sa pcb, napuputol or naalis po ung iba lines ng design. Plantsa po ung gamit ko dahil wala pa ako laminator. Sinunod ko po ung steps sa vid nu po.
@@seandrixreyes9688 gamit ka 300 grid sand paper para mas malalim ang gaspang ng PCB kakapit ito need kasi soak sa water ang PCB bago apply ang blue film
Galing Idol salamat s educational video... Mabuhay.
so beautiful!
Bravooooooooooooooooooooooooooo
ممتاز شكراً لك
Hi, very nice job you’ve got here. I’m wondering are you using inkjet or laser jet. And how many watts has your UV lamp. Thanks.
This method is inkjet friendly
Hello! How thin can we go with the lines? Do we need a minimum distance between lines/ corners ? Thanks!
It's depends you watts of LED UV light you need more experiments to do this what exactly time to expose to UV light
130 degrees is the ideal temperature to attach the film to the copper?
I don't think so but in my laminated machine is in between yellow and green area
Hi, sa paglalagay ng silkscreen sa plastic side ng PCB, okay lang din ba gamitin itong dry film method?
are you printing that on normal white paper?
Yes ordinary A4 paper
What is the plastic sheet stuck there for?
Negative Photoresis search on Shopee apps
Help please, I am running into an issue where sections on the board just refuse to etch, the etchant removes most of the parts but there are some areas that refuse to come off
Use 300 grid sandpaper so that the blue film adheres well. because when the roughness on the PCB is thin because you used thin sand paper, the Blue film will not stick even if your PCB is still very clean, you need to roughen it completely. use 300 grid paper.
@@diyelectronics5375 Thank you for the reply. I tend to use 400 grit, would you suggest moving down to 300?
Ung pcb po ba ay naliha po ba?
what printer are you using?
Canon G1010
How you remove stuf from it to solder on pads?
Use lacquer tiner and soak aftet 2 min
Amazing job Po sir last na tanong nalang Po sir saan nyo Po nabili yang UV light nyo Po sir
If diy pa share Naman Po pls. Maraming salamat po sir🙏🙏🙏
Gawa ko lang bili ka UV LED sa shopee meron naman nabibili Buo na ginagamit pampatuyo na Nail art Paint search mo nalang
Is the PCB printed in mirror?
Use adobe photo shop edit by inverted settings
Ano o paano po ninyo nagawa yung ganyang pag print ng layout baliktad yung walang copper island yung na pprint para kapag na expose sa uv led maiiwan yung pinaka mismong layout.
gamit ka ng adobe photoshop tapos inverted mode nood kanalang ng youtube tutorial paano mag inverted mode sa photoshop
para sa mas madali PCB layout eto
th-cam.com/video/v6BHSXUr56Q/w-d-xo.html
How you determined exposing time plz give mi answer fast
i do trial and error until i got the exact time exposure. 20 or 30 sec depend of watts of UV LED
i dnt know tagalog, is 2:36 detergent ?
my english is not good but u can use english text for non ph viewers maybe help
usually the developer is 7 grams of sodium hydroxide diluted in 1 liter of water
Use powder washing machine soap with sodium carbonate ingredients read the ingredients at back of package soap label
Explain what you're doing
- anong app po yung pinang gawa sa layout tsaka paano po kukunin yung size na 3x5 para sa pcb size for project purposes po ty
EasyEDA search in Google
Sir paano Po mag print Ng pattern Po sir thank po
Saan niyo po nabili ung Dry Film dito sa philippines po? Baka pwede po bumi sainyo sir.
Shopee meron sa lazada
pagawa po ko pcb sir may layout na po ako
Wala pako stock fiber PCB
pag nakaroon na po kayo sir pa msg nlng po sa messenger ko or messenger nyo
ano ba ang wattage ng UV light? thnx
5watts
DIY
Say, what software you used, what paper to use, how you transfered the circuit to board, etc ... Don't keep quiet.
A4 Bond paper no software use PDF file
paano po gumawa ng LED UV Light? Salamat
Sa Shopee meron nabibili buo na search mo lang UV LED lights
Ano po gamit niyong laminator?
Para mag super flat siya wala bubble sa gitna kailangan din mainit siya
@@diyelectronics5375 i mean anomg brand and model po nang laminator amg gamitin niyo po? Plan ko rin po kasi mag buy
@@markallenalberto6398 sa shopee konsiya nabili kahit anu brand naman
@@diyelectronics5375 sa thickness po ba? May dapat po akong iconsider? 1.4mm po kasi normal na thickness ng pcb, tas puro mga 1?? Thickness po yung mga laminator sa shoppee
@@markallenalberto6398 kahit ako kapal bg PCB sinasalang ko sa lamination wala naman problema
Ayaw lumapat ng film sa PCB?
Gamit ka 300 grid na sand paper tapos kailangan laminator mainit nasa green area base sa laminator meter
Pa help po di natutunaw ung film sa sabon
Anu gamit mo sabon? Kasi kung hndi siya natunaw sa Sabon malamang over exposure ka sa UV light ibig sabihin lahat ng blue film is naging plastic na. Na manipis dahil sa over exposure try mo kayurin ang film matigas nayan dapat malambot payan after ng exposure
@@diyelectronics5375 Tide po ung gamit ko. 20 - 25 sec ko din po ineexpose sa uv light. natunaw na po ung film kaso parang di dumidikit sa pcb, napuputol or naalis po ung iba lines ng design. Plantsa po ung gamit ko dahil wala pa ako laminator. Sinunod ko po ung steps sa vid nu po.
@@seandrixreyes9688 gamit ka 300 grid sand paper para mas malalim ang gaspang ng PCB kakapit ito need kasi soak sa water ang PCB bago apply ang blue film