Sir Levi, try nyo po camber bolt sa harap para pasok yung fitment kung hindi kayo gagamit ng canber plates. Same comfort pero yung fitment sasakto kumpara sa likod.
You should have gone with 225/40/19, 235 gives you another .5 inch overall in diameter. offset does not look right at all, No way you can lower the car without having issues. Those wheels looks nice on the Mazda.
Boss levi tama po kau very accommodating po sila dyan. Sa kanila kami nag papalit ng gulong ng montero at cx5 namin pati na nga oner type jeep namin sa kanila na din ako bumili hehehe. Thank you sir nagka idea na ako magkano pag iipunan kung mags sa cx5 habang dipa expired yung mga gulong hehehe. Godbless po
nice build sir, im planning to get the same set of wheels for my mz3 pero hyper black, may i ask how is your experience with the switch from stock size mags to 19in, i own a 24 model and im looking for more ideas and how it feels against humps and small potholes.
For me di naman kailangan wala ka namang ginalaw kundi gulong lang kung pantay naman tangos nung stock na gulong di mo na kailangan magpaalign, papaalign kalang pag nagpalit ka ng suspension
Sir why dont go you go the extra mile than just have a lowered static stance and go for air suspension for your Mazda 3? With an air suspension set up and when the road before your Mazda 3 neccesitates a higher ground clearance, you can safely negotiate that urban terrain on the fly.
Yes air suspension gives you the adjustability on the fly but I’m fine with lowering springs as of now since I usually use this car only on good roads going to work especially bgc, and also for a piece of mind on maintenance, not saying that airsus is not reliable I support the technology 😀 just not what I need as of now and I’m more used to with static setups.
@@ridewithlevi6418 consider mo na sir ung coilover wag ka na mag lowering para nde mawala ung comfort oto mo ... check mo ung STD na brand check mo ung page ni coilover specialist... maganda ung after sales nya at sa shop nila mismo mag install para matimpla ng maayos..more power seo idol.....
Nice choice for the mag wheels. Sporty and clean look 👍 Did you use a hub centric ring for the wheel? Looking forward to see your M3 with lowering springs. I've been looking for a shop that sells the Eibach Pro Kit lowering spring but it's difficult to find a brand new stock here at NCR.
Masyadong aggressive ang thread pattern ng SS595 and based sa reviews maingay siya, federal st1 malabot compound/sidewall which has better ride quality and tahimik sa highway + mas malinis ang thread and side wall design.
Ah I see. Then why Federal tires po, how about the other brands? Been searching for my next tires po kasi, currently using SS595. Thanks for answering Sir
@@abdulqarnainmacasayon4460 it’s only the tire brand that have the tire spec that i want that performs well, mahirap kasi pag 19” ang mags limited lang ang tire availability
Love the new mags sir Levi though I also like your old Linea Corse sir, did you sell it ba sir kasi nakausli yung likod? Eto kasi ganda ng pagkaflush nya.
Sir di ba kau nababahala doon sa sinasabi nilang madaling matanggal yung center-cap pag nalubak? Pwede kaya lagyan ko ng silicon sealant yung VLF ko sa center-cap?
Hello po sir Levi,,pag po ba magpapalit ng mags and tires,,need na mag pa lowering springs agad? Salamat po in advance sa sagot sir🙂ride safe po always
with free endorsement pa ang swerte ng shop. magkano ba kadalasang presyo ng tire set sir levi? may nakikita kasi akong nasa 18k x4 ganun ba talaga yun ka mura o dapat mahal?
Depende naman sa brand and size ng tires yan sir, usually ang mga china branded tires ang 5k each 20k a set, pag quality tires na usually 10-14k+ each, pag highend tires naman nasa 20k pataas
@@ridewithlevi6418 ang bilis naman nasira sir, yun din kasi comment nila hindi daw pang matagalan lalo na't naka steady siya, parang may conversion pa daw para hindi uminit ng sobra, so stock nalang talaga, baka may link ka sir na pwede makabili online ng accessories na pang mazda bt50 or all mazda, thankyou in advance sir.
Sir levi, quick question. Possible po ba na mag palit ng mags lang, but not replace/increase the gulong mismo? Usually sa montero, ginagawang 20inches and replace yung mags. Gusto ko sana mags lang hehe possible ba? Thanks!
Bodykits na lang kesa lowering spring. Parang nakalowered na din yan sa laki ng mags and tires na fillin na fender well mga 2 to 3 fingers na lang gap nyan siguro sa fender
@@dbmscreen dudumi yung look pag nag bodykits pa, mas okay talaga pag nilowered night and day difference for me.. pag nilowered ni sir yan magiging 2 finger gap nalang yan as of now parang 4fingers pa
Still researching what would be perfect para sa current setup, pero mukhang promising yung eibach lowering springs based on reviews almost same sa stock ang ride.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
Iba talaga si sir levi taas ng taste pagdating sa kotse . Good choice sa mags at brand saka ganda ng kinalabasan. 👍
Thanks 🙂
Nice information about those dots. Thank you Sir.
Sir Levi, try nyo po camber bolt sa harap para pasok yung fitment kung hindi kayo gagamit ng canber plates. Same comfort pero yung fitment sasakto kumpara sa likod.
this setup is better and sportier than the looks of the top of the line mazda 3
Pogi na ng montero pogi p ng mazda 3! Wooo! More power sir levi!
maganda talaga ang taste mo sir levi. 🔥🔥🔥🔥
napakalinis lage ng setup nyo sir
Hi Sir Levi. Ako po yung bumati sayo na wine red mirage hatchback last friday sa taguig. More power sa channel niyo, Sir! ✨
Oh nice to you..ingat bro
Looks so good sobrang bagay ng mags sa kotse I thought its work emotion cr p2 nice upgrade u have really nice po talaga lowered na lang kulang
Same mags tayo sir vlf11 din sakin matte bronze sa vios gen 3 ko. Ibang size lang 16x7 et 38 din.
ok vlf underated ung rays masyado hyped! eh halos same lng sila ng vlf
Boss, dis one is much better....
Same rims for my mazda 3 2017 from VLF. 👏🍻
Sheeesh! tama sir ilowered na yan mas maapreciate mo pa lalo ganda ng wheels na yan
You should have gone with 225/40/19, 235 gives you another .5 inch overall in diameter. offset does not look right at all, No way you can lower the car without having issues. Those wheels looks nice on the Mazda.
I have lowered it by 1 inch and no problem at all
how is it with 5 people inside the car?@@ridewithlevi6418
+38 offset looks pogi pare. Nice
Sana lahat ng tito ganto ang taste hindi lang puro lagay ng nakakasilaw na FRTNER Or MNTERO tail strips haha. Ganda ng setup sir!
Boss levi tama po kau very accommodating po sila dyan. Sa kanila kami nag papalit ng gulong ng montero at cx5 namin pati na nga oner type jeep namin sa kanila na din ako bumili hehehe. Thank you sir nagka idea na ako magkano pag iipunan kung mags sa cx5 habang dipa expired yung mga gulong hehehe. Godbless po
Ganda sir
I saw your mazda kanina sa benilde parking open area ( yellow calipers with same wheels)
Yeah, gamit sir ng anak ko
Sana yung noise cancelling tires nabili nyo boss. Big difference
Saktong sakto sir. Yung shot sa parking lot bandang huli and yung 13:41 parang naka lowered na?
nice build sir, im planning to get the same set of wheels for my mz3 pero hyper black, may i ask how is your experience with the switch from stock size mags to 19in, i own a 24 model and im looking for more ideas and how it feels against humps and small potholes.
i am happy with it. but syempre hindi sya kasing smooth ng stock but its tolerable to me
Ganda sir😍
Thanks po
Would you recommend this car in 2024?
Yes, its a fun car
Mapapa hahaay nalang ako while nanonood, hindi na nga makaka afford ng mags, lalong hindi pa makaka afford ng Mazda 3 hehe
Sir nagpa alignment ka ba ulit kasi usually pag nagpalit Ng bagong gulong dapat I align
For me di naman kailangan wala ka namang ginalaw kundi gulong lang kung pantay naman tangos nung stock na gulong di mo na kailangan magpaalign, papaalign kalang pag nagpalit ka ng suspension
Hello sir Levi. May I ask what color are these?
Same tayo ng mags sir. Mazda 3 din yung unit ko
Sir, eto pdin ang gamit nyo now na mags/tire setup? after mag lowering spring? Kamusta po ang ride?
Ganda ng taste mo paps!
hi sir, may i ask hows the condition of your vlf mags as of now? planning to get the same type of vlf mags for my mx5
Ok naman sir, no issue
what did you do for your stock mags and tires? did you end up selling the set?
@@wkwk-hg6jeno, I kept it and I sometime use it when I go to the province with rough roads
classy!
Mas ok ung linea kung nasa tamang offset. Pero ok parin din nman kinalabasan
no need na ba for wheel alignment sir Levi after changing new wheels/tires?
It depends on you, kung wala namang kabig hindi ko pina pa align
Sir why dont go you go the extra mile than just have a lowered static stance and go for air suspension for your Mazda 3? With an air suspension set up and when the road before your Mazda 3 neccesitates a higher ground clearance, you can safely negotiate that urban terrain on the fly.
Yes air suspension gives you the adjustability on the fly but I’m fine with lowering springs as of now since I usually use this car only on good roads going to work especially bgc, and also for a piece of mind on maintenance, not saying that airsus is not reliable I support the technology 😀 just not what I need as of now and I’m more used to with static setups.
paps gnda mags pogi dating.ask po paps saan po location branch bili nyo mags
Novaliches branch sir quezon city
Sir bilhin ko na yung linea corse nyo, I want to put those mags on my mazda 3 fastback din
Nabenta ko na sir
Na try nyo na po ba mag apply ng SANGLA ORCR sa Global Dominion Financing, Inc.?
Hindi sir, mukhang nakakatakot magsangla
Ganda fitment. Curious ako on how sir Levi will lower his Mazda 3 . Air sus kaya?
Lowering spring lang sir either Eibach or H&R, pwede rin Tein
@@ridewithlevi6418 consider mo na sir ung coilover wag ka na mag lowering para nde mawala ung comfort oto mo ... check mo ung STD na brand check mo ung page ni coilover specialist... maganda ung after sales nya at sa shop nila mismo mag install para matimpla ng maayos..more power seo idol.....
Good day . Sir levi ano po recommended mo na 19” mags and tire sa brz 2024 ko yun pasok po sa fender. Thx po
Groupong n kami magbabarkada stance nation po godbless po
Sir would you consider remapping your Montero Sport?
Hindi sir, not a fan of remapping
why not rota sir?
lods mazda3 2024 ba new car u linis tignan
Nice choice for the mag wheels. Sporty and clean look 👍
Did you use a hub centric ring for the wheel?
Looking forward to see your M3 with lowering springs. I've been looking for a shop that sells the Eibach Pro Kit lowering spring but it's difficult to find a brand new stock here at NCR.
I did not install hun centric ring
Ask ko lang po Sir, bakit po Federal Evolution ST1 ang napili niyong tires? As compared to Federal SS-595.
Masyadong aggressive ang thread pattern ng SS595 and based sa reviews maingay siya, federal st1 malabot compound/sidewall which has better ride quality and tahimik sa highway + mas malinis ang thread and side wall design.
Ah I see. Then why Federal tires po, how about the other brands? Been searching for my next tires po kasi, currently using SS595. Thanks for answering Sir
@@abdulqarnainmacasayon4460 it’s only the tire brand that have the tire spec that i want that performs well, mahirap kasi pag 19” ang mags limited lang ang tire availability
Ohhh. Kaya po pala. Thanks Sir.
nice setup! member po ba kayo ng mazda club?
Love the new mags sir Levi though I also like your old Linea Corse sir, did you sell it ba sir kasi nakausli yung likod? Eto kasi ganda ng pagkaflush nya.
Yes I sold it
Sir ask ko lang kung maganda rin ang labas pag 35 ang off set na lenso?Wait ko povsagot nyo bago po ako bumili.
Nakalabas sya ng mga 1 inch, kung gusto mo naka flush sa fender +38 offset
ok din Rota KBF or rota torque... filipino made pa
Sir Levi, san mo nilagay ung stock mags pauwi? Sa Mazda3 mo rin sinakay? O sa Montero
Dito rin sa Mazda ko nilagay, kasya naman pag naka fold down ang rear seats
Hindi na ba kailangan ng hub centric rings Sir?
Do you consider changing your exhaust po to have a deeper tone?
I would love to but maybe in the future if I have the budget
@Ride with Levi looking forward to that upgrade!
Sir di ba kau nababahala doon sa sinasabi nilang madaling matanggal yung center-cap pag nalubak? Pwede kaya lagyan ko ng silicon sealant yung VLF ko sa center-cap?
Hindi naman sir
Mas maganda ba siya kaysa sa Rota? Nag bblak kasi ako mag palit ng rims
Ano sir levi ang latest year model ng mazda 3 hybrid or yung isang model nya? Salamat sir
2023 po yung Hybrid latest model
Idol di ka papakabit ng hub centric ring?
Sir Levi, mas okay ba ang hybrid na mazda 3 or yung conventional pa din?
To me ok ang conventional kasi mas cheaper to miamtain. mahal sin yung battery ng hybtid
san gawa vlf sir?
Okay ba vlf ? Hindi ba sya same lang ng mga cheap china copies
Sir levi, okay rin vlf noh? on par ata sa rota in terms of weight.
Mas lighter sya than Rota kasi flowform sya
Bumalik pala kayo sa stock na drl niyo? Bumili din kasi ako sa mikstore pero nasira na today :/
Yup balik syock muna hanggang hinsi pa nakakakita ng matibay na DRL
Sir sana manotice po. Ano pong color ng vlf mags mo? Thank you in advance.
nice❤
Mag ask po ako sir if may pang spare mags ang tire po sila.
Pang nissan terra
Sir Levi di mo na pina allign yung bagong gulong mo
Hindi na sir, wala namang kabig
Hello po sir Levi,,pag po ba magpapalit ng mags and tires,,need na mag pa lowering springs agad? Salamat po in advance sa sagot sir🙂ride safe po always
Hindi naman sir, depende yan sa iyo kung gusto mo i lowered
@@ridewithlevi6418.ah ok po.salamat po sir levi🙂.lagi ako nanunuod vlog nyo po.godbless po..🙏
Baka Levi gagawa ka stance Mazda 3
Ganda! Ano po size nung old niyong mags?
19x10 and 19x8.5
Sir anycplans on making it all LED na sa lights?
Already did dati kaso napundi yung isang bulb kaya binalik ko sa stock
@@ridewithlevi6418 Any recommendations sa brand ng LED sir?
@@potatodoppelganger keon sondra, aglint
sir safe ba ung te37 na made in thailand?
with free endorsement pa ang swerte ng shop. magkano ba kadalasang presyo ng tire set sir levi? may nakikita kasi akong nasa 18k x4 ganun ba talaga yun ka mura o dapat mahal?
Depende naman sa brand and size ng tires yan sir, usually ang mga china branded tires ang 5k each 20k a set, pag quality tires na usually 10-14k+ each, pag highend tires naman nasa 20k pataas
@@ridewithlevi6418 tires pala nailagay ko imbis mags normal lng ba yun na 14k sa apat na mags sir?
@@NERO-ez1mn masyadong mura ang 14k para sa mags sir, makakakita ka lang siguro niyan sa second hand or worse baka fake ang mags na ganyan.
@@ridewithlevi6418 ganun nga sir. magkano ba talaga yung legit sir? minimum price bago mo masabing legit
@@NERO-ez1mn 25-30k I suggest mas tingnan mo yung reputation ng shop na pagbibilhan mo if they’re selling quality wheels or not
San ka nakabili?
Sa RNH Tire supply
19" p rn po my 18"?
May 18” po and 8” lang ang lapad
Salamt po sir levi prob ko po my sensor po ksi un mags nun emgrand
@@rafinalgonzales6730 nalilipat naman ang tpms
Okay sir salamat po ng madami my design n ko nkita po thank you so much sir
anung nangyari sa led drl niyo sir?
plano ko sana palitan sa bt50 ko.
Napundi sir yung isa kaya back to stock ako
@@ridewithlevi6418 ang bilis naman nasira sir, yun din kasi comment nila hindi daw pang matagalan lalo na't naka steady siya, parang may conversion pa daw para hindi uminit ng sobra, so stock nalang talaga, baka may link ka sir na pwede makabili online ng accessories na pang mazda bt50 or all mazda, thankyou in advance sir.
@@sjlim1776 check mo kay Mikstore marami sya accesories dun
naka civic ako pero gwapong gwapo talaga sa ako mazda 3
Sir levi, quick question. Possible po ba na mag palit ng mags lang, but not replace/increase the gulong mismo? Usually sa montero, ginagawang 20inches and replace yung mags. Gusto ko sana mags lang hehe possible ba? Thanks!
Yes pwede mags lang as long as same size yung wheels sa stock na gulong mo or current na gulong mo
@@ridewithlevi6418 thank you sir! More power sa channel!
can't wait to see your car dropped on lowering springs!
Same
Bodykits na lang kesa lowering spring. Parang nakalowered na din yan sa laki ng mags and tires na fillin na fender well mga 2 to 3 fingers na lang gap nyan siguro sa fender
@@dbmscreen dudumi yung look pag nag bodykits pa, mas okay talaga pag nilowered night and day difference for me.. pag nilowered ni sir yan magiging 2 finger gap nalang yan as of now parang 4fingers pa
@@llyanjimenez4985 sabagay. Kakit side skirt sana masyadong mataas na groung clearance parang crossover na hehe
Baka naka hand break umaangat talaga likod. Pag moving siya parang 2 fingers na lang base sa video @13:40
Boss ano weight ng tire and wheel combo na yan?..
Hindi ko sir natimbang but its lighter than my previous mags
Ebebenta nyo ba ang old mags po?
Nabenta ko na sir
New subscriber nyo po🙂salamat po.
anu spec nyan boss?
Hyper black po kulay neto sir?
Silver sir
Mzta po ride quality? Mag matgtag po ba?
Hindi sir, ang ganda ng ride, actually mas prefer ko ride niya ngayon compared sa stock mas planted and stable ang handling.
Mas maganda pa din tingnan pag pasok sa fender ang mags and tires
buy ko na old linea corse mags mo levi
pwede?
Nabenta ko na sir
Mukhang binubudol ka sir ng anak mo na mg air sus….hehehe
Oo nga sir, panay ang research eh tapos panay ang padala sa akin ng mga options
Mas okay yung dati po
ABH 4660
maigay ung gulong mo sir
Tahimik sir, mukha lang maingay thread pattern pero tahimik sya
Promo SM
1st
ilan po ang difference ng fuel consumption compared sa stock wheels na 16s?
good question
@@miken.2847 ngtataka lang bakit walang nagtanong about difference in fuel efficiency kasi medyo malayo na ung bigat ng 19s compared sa 16s
Naka 19s din ako 234/35/19 - 12-13km/L ang average ko
Ano lowering spring kakabit mo dyan sir? kuha lang ako ng idea yung hindi matagtag o matalbog
Still researching what would be perfect para sa current setup, pero mukhang promising yung eibach lowering springs based on reviews almost same sa stock ang ride.