Mini Excavator Hydraulic Filter Install
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- These are the parts we used to install this filter.
One eachMetric adapters Brennan Industries 7005-08-L15-22, 7007-08-L15-22
Two Male NPT to Male JIC 3/4" to 1/2" Brennan 2404- 08-12
3 Each Gates 8G-8FJX hose end
1 each Gates 8G-8FJX 90 hose end
8MXT 1/2 Gate hose
Staff Hydraulic return line filter SAF-07-B1.7-O Rated at 25 GP and 200 PSI.
By the way it looks like there is a factory filter Inside the hydraulic oil tank itself. Your filter install looks better, but good to know another one exists. Here is their video.
th-cam.com/video/8O8tCzvUqgw/w-d-xo.html
Yes there is a filter in the tank but it's only a screen, I just call them "rock stoppers" and are very hard to service and access. Thanks for the link and watching.
That's weird they would install the oil cooler in front of the air intake for the motor. The motor will be sucking in hot air from the oil cooler. I would imagine it would be better to mount the oil cooler on the other side of the engine compartment? Am I wrong here?
@@skeller0160 I think the fan on the cooler draws air from the engine compartment and blows it out the side. But yes it still pulls hot air from that compartment past the cooler.
Merci pour les renseignements .
I looked at the parts list but specifically what fitting sizes for the frmale to connect to the hydraulic cooler the male size to go to the 90 that currently connects to cooler.
The fitting sizes end up being 1/2" to fit the relocated cooler return line which was also 1/2 "
Is there a place in Moose Jaw to get custom hydraulic lines made up? I know Princess Auto does but locally???
C & E Mechanical and some of the Ag dealerships do it.
@@Nova.1971 thanks my son needs a power steering line modified for a 2JZ swap.
@@InternetDude what you normally do is take the old hose if you have one and cut the tubes off and make a new hose with tube type ends or adapters. I would need to chat about it with you and get you on the right path. You can email me and we can exchange numbers.
Impala.ss@shaw.ca
thanks I think we have both old and new style end but need new rubber hose and crimped on in between @@Nova.1971
Hi can you please send me the part number and where I can buy it thank
The part numbers are in the description of the video. Parts were sourced at local hydraulic shops. You may be able to source them online also. Thanks for watching.
Nice work Mike very clean and tidy install, it certainly helps when you're a hydrolic expert thanks for sharing 👍
Thanks for watching Gary....
do know what size hydraulic cooler flow do you have thanks
The cooler came with the excavator so I’m not sure what the exact flow it can handle. As pumps on these machines are not that high of flow I’m sure they can handle it.
25 liters per minute