yea but he didn't explained who it was, how it happened etc...most of us know from comics, cartoons etc that hydra are bad and shield are good and the main plot....so he didn't really spoil stuff
Bob, thanks for your willingness to bring us along on the learning process with your projects instead of just the final-form! You continue to inspire our family!
Trick on VHB tape you may already know. Store the roll in the refrigerator. Heat is the VHB tape worse enemy before installed, it glued itself together. Looks awesome!
Uv ink is flourescent, you are probably thinking about phosphorescent ink. However this kind of ink isn't really translucent so you would see it. If you would really want to make it amazing you could probably go with electroluminescence.
I love the finger activated glowforge button!!! I laughed a replayed it twice. We have the same thing for our sound system minus the hilarious finger addition!!!!
Your wife and I think alike! I have an all-black Grand Cherokee (because I too have a love for secret agent looking vehicles) and it has a SHIELD decal on the back as well as a licence plate cover. I'm going to have to take it to the next level with this project! Thanks for the inspiration - this is an awesome idea!!
I got a notification that you posted a new video. I then left in the middle of a meeting at work to "find some information"..... Although I didn't get the information we needed for the meeting, I learned how to make custom car badges from you guys this morning and that's a win for me.
I work at a sign shop and we are always kicking around ideas kind of like this in the design department. I have been wanting to try using a comic bit to scribe a design into some clear acrylic and use led lighting from the side. After seeing the epoxy in your video i believe it would give me the depth I was looking for. Thank you all for sharing your ideas I really enjoy your videos
Hey, I was thinkin putting like LEDs in a small casing so you could turn it on and show it off with a press of a button. I don’t know if that’s possible on the exterior of a car though.
When you talked about it on the pod I couldn't visualize it, but this freaking rocks. One of my favorite projects of yours. Feels like it should be on tested/One Day Build!
Many moons ago I used pour epoxy onto brass name badges. We used to just pour enough epoxy so that when it got to the edge it would form its own edge a bit like an inverse meniscus.
I know this is an older (in TH-cam time) comment, but did you ever do this? I ran across this video because I've been wanting to replace my car's front grill emblem with an Autobot or Decepticon logo. Had no idea where/how to start, which is how I ended up here :)
really cool man! I really like that you admittedly show any flaws in your projects, whether they are a mistake, or it didn't go as planned and you go a different direction. Love your channel! Suggestion......build a custom fish and/or reptile tank
This is -- dare I say it -- MARVELous! I'm part of a Marvel podcast, and I'm going to be sharing this with my co-hosts when we meet to record later tonight.
Just an idea but could you pour a layer of epoxy than draw on it with the uv ink and build up a 3D picture using multiple pours, creating the illusion of a hologram?
I have some M3 fender vents on my C10 that I have been wanting to replace the bubble logo with a Chevy bow tie, and I think this is how I should do it! 👍🏼 great project Bob!
This paired with a ring of UV LEDs in a rechargable belt buckle format. It's on my list of things to learn, custom buckles, including ones with electronics.
First of all really enjoyed seeing the row of truly how many different things you tried...it was oddly encouraging. I'd like to see a bits video over pressure pots and vacuum chambers and stuff; at what level you really need them, and how to find a good one vs a "cheap" one. If I'm missing it and there's already one I'm sorry I did look and couldn't find anything.
Really cool. I have 65 beetle, I've been planning to but same type custom horn you did, but with transformers sound. (already have all the parts for it, just need to make the leap) This summer I also lost one of my wheel center caps, and been planning about doing new ones with transformers logo. But this gave me idea of doing vw logo, and hide that transformers logo behind....
This would make a great escape room puzzle. I have a world globe for a puzzle box thanks to you. Weird it changed colour. Must be something to do with the resin?
This is absolutely brilliant! I have a very black car too and it is often referred to as a 'bat mobile'. i am going to hide a batman logo behind the BMW badge! thanks for the inspiration!!
This would be so cool to add onto a shield agent uniform/cosplay
YES!!! That would be great!!
How about onto A Nomad (Captain America ) costume since it is mostly black and nobody would expect it.
Holy moley, this would sell like hotcakes, even just as a pin or badge at comic cons and comic stores.
Some after-parties at conventions have UV lights at them, too, so you would attend the con as a shield agent, and the after-party as a hydra agent!
But add UV leds + an Arduino to it. So it will randomly fade in sometimes for a brief moment :)
UV ink might be good to mark your tools in case someone will "borrow" them.
Michael Fairchild don’t get me started on Rick. He still hasn’t returned my tools from last August
@@MWB18 Ghat Dhammit, Rick!
This is why I pee on my tools, No one would dare touch them.
Just paint them bright pink because no one wants to be the guy who stole the pink tools.
@@tonysolar284 except if the dog got in your workshop then they'd just pee on them too so they'd be reclaimed for all dog kind 😂
I love how this project was an exercise in iterations and problem solving! FIRST!
Wonder how you got FIRST on this one? Great build for sure!
I love when people include process in their videos too! Makes it so much more engaging. Same reason I love Adam Savage's channel
*cop pulls me over*
Cop: License and registration.
Me: Hail Hydra.
Cop: You’re free to go.
i get it.! 😊
isn't it heil hydra since it is a german/nazi group?
What would you do if that happened?
@@hyrumdetton12 they're not nazis, and is Hail HYDRA
@@jahdielmedina3590 they started as Nazis but they separated quickly
Bob: I don't want to spoil the whole Hydra, Shield thing for you.
Also Bob: *Immediately spoils it.*
yea but he didn't explained who it was, how it happened etc...most of us know from comics, cartoons etc that hydra are bad and shield are good and the main plot....so he didn't really spoil stuff
Straight up Spoiler Alert ⚠ without warning then boom Plot decimated 😂
It's been SIX YEARS! If you haven't seen that (winter soldier) by now ...
I love that the simplest approach ended up working the best.
This is what gives me hope that mine will turn out ok. 😆
Pretty cool, id love to see this used in a future project with the light integrated into the object
Totally, I thought that would be cool if it could be controlled by a switch inside the vehicle.
Very cool project Bob. You've got my wheels spinning. Thanks!
Good! Glad to hear it!
Bob, thanks for your willingness to bring us along on the learning process with your projects instead of just the final-form! You continue to inspire our family!
Thank you so much!!
Trick on VHB tape you may already know. Store the roll in the refrigerator. Heat is the VHB tape worse enemy before installed, it glued itself together. Looks awesome!
Instead of UV ink if you had used fluorescent ink, it would show up during night time or in the dark.
Uv ink is flourescent, you are probably thinking about phosphorescent ink. However this kind of ink isn't really translucent so you would see it. If you would really want to make it amazing you could probably go with electroluminescence.
I wonder if he used a coat of seal on the uv ink would have prevented epoxy from altering the red
I love the finger activated glowforge button!!! I laughed a replayed it twice. We have the same thing for our sound system minus the hilarious finger addition!!!!
Your wife and I think alike! I have an all-black Grand Cherokee (because I too have a love for secret agent looking vehicles) and it has a SHIELD decal on the back as well as a licence plate cover. I'm going to have to take it to the next level with this project! Thanks for the inspiration - this is an awesome idea!!
You and his wife are just too cool for the room!
Every time I watch your videos, I learn something. 👍
That is FANTASTIC to hear!! Thank you!
Love that you guys showed the failures...It’s awesome to see the full process. The final version looks great!
I got a notification that you posted a new video. I then left in the middle of a meeting at work to "find some information"..... Although I didn't get the information we needed for the meeting, I learned how to make custom car badges from you guys this morning and that's a win for me.
Ha! Awesome :)
Imee, your boss here. Come see me in my office tomorrow.
Just kidding. I'm not your boss. Carry on.
I'd like to see you make
the Pokemon Gym Badges
Duchi I didn’t know I needed this from him until now
Like this so that bob see this
150 likes! It’s a sign
Or a pokeball with your fav pokemon using the UV ink.
@@SethPortland squrdle is the best
I LOVE this project and how the resin pour-over turned out.
I wonder if backlighting with some UV LEDs would disperse the UV light enough to highlight the logo on demand.
With a black transparent acrylic to start and a combo of opaque spray and uv pen you could probably do some really cool stuff
I work at a sign shop and we are always kicking around ideas kind of like this in the design department. I have been wanting to try using a comic bit to scribe a design into some clear acrylic and use led lighting from the side. After seeing the epoxy in your video i believe it would give me the depth I was looking for. Thank you all for sharing your ideas I really enjoy your videos
Those molds are the best looking molds I've ever seen😌
Hey,
I was thinkin putting like LEDs in a small casing so you could turn it on and show it off with a press of a button.
I don’t know if that’s possible on the exterior of a car though.
One of the coolest projects seen. Love the trial and error, trial and error = growth! Dig it.
When you talked about it on the pod I couldn't visualize it, but this freaking rocks. One of my favorite projects of yours. Feels like it should be on tested/One Day Build!
Many moons ago I used pour epoxy onto brass name badges. We used to just pour enough epoxy so that when it got to the edge it would form its own edge a bit like an inverse meniscus.
Beautiful, Bob! Fantastic job!!! 😃
Back to projects that are fun and practical! love this
This is pretty nice, love the fact that I don't need to have a laser cutter or any of that fancy stuff, thanks for sharing.
Always love your videos. Thanks for having little to no adds.
Love her style, reminds me of my wife. Amazing project Bob. Definitely going give this one a try with auto-bots/decepticons
I know this is an older (in TH-cam time) comment, but did you ever do this? I ran across this video because I've been wanting to replace my car's front grill emblem with an Autobot or Decepticon logo. Had no idea where/how to start, which is how I ended up here :)
Very cool project! Those UV pens are interesting...thanks for sharing!
You are very clever, and make an excellent job in what you’ve done. It looks amazing. 👍👍
Super cool. Good work Bob and the team!
I'm actually working on a dual-sided resin-coated coaster, so your paper backing tip just helped me. :D
Ok so your wife essentially has the greatest taste in vehicle colors. I love this. Project bob!!
really cool man! I really like that you admittedly show any flaws in your projects, whether they are a mistake, or it didn't go as planned and you go a different direction. Love your channel!
Suggestion......build a custom fish and/or reptile tank
That last drop synced with the music at 7:13 was amazing
This is one of the coolest projects you’ve done. Super super cool
I nerded out SO hard to this. This might be my favorite thing I've ever seen you do.
Fantastic tutorial video.
I am a huge Marvel and Agents of SHIELD fan so this was a really great bonus!
Thank you for sharing.
Its always fun to discover the partners are just as cool as the creators.
I'm not a Marvel fan, but an Autobot/Decepticon one would be awesome!
This is -- dare I say it -- MARVELous! I'm part of a Marvel podcast, and I'm going to be sharing this with my co-hosts when we meet to record later tonight.
Great video! That UV ink could be a surprise for birthday cards or party name badges
Best video in ages! And loved how the low tech solution won out!
Just an idea but could you pour a layer of epoxy than draw on it with the uv ink and build up a 3D picture using multiple pours, creating the illusion of a hologram?
Ummm YESSSS
Off topic but I fell for your avatar and tried to blow it off my screen.
Self-sponsored! Nice. Very refreshing. And confusing LOL. Cheers! Chris.
Cool! Love how the final ones turned out!
Shut the front door! 😮 Awesomesauce!
Very nice! A simple idea executed well.
I have so much fun learning from you and your team.
You are incredibly creative! Congrats
I have some M3 fender vents on my C10 that I have been wanting to replace the bubble logo with a Chevy bow tie, and I think this is how I should do it! 👍🏼 great project Bob!
I'mma do this to my car, but I'll do this with autobots and decepticons.
That's meta. The two logos will look incredible.
That seems difficult due to the symbols being extremely different. But if you pull if off I really want to see it!
@@wyattthayne7168 well, no luck just yet. But I am not giving up.
How us it going?
Hey, any progress?
I love looking forward to your videos every Thursday
This paired with a ring of UV LEDs in a rechargable belt buckle format. It's on my list of things to learn, custom buckles, including ones with electronics.
Wow, this is my favourite chanel for a reason! Cool projects well done.
Loved it. Well done ILTMS team, what a great idea
Awesome project at so many levels. I love it.
First came here for the wood working stuff, but man you do some cool stuff...
What a really cool project!
You are a genius!!!!!!!!!!!!!! I want one like those
This would be awesome for a autobot/decepticon logo
I was thinking the same thing. Like with their rub signs on the toys.
yes!!
@@Metalman200xdamnit excactly
Man that is super cool! ♥️♥️♥️
This is awesome in so many ways!!!! love it!
Coasters for your coffee table. That would be a cool idea.
Instead, you use heat reacting paint
Very cool project! Definitely going to experiment with this idea.
Awesome man. Nice new SUV
Love how you show bloopers, love from india
That’s pretty cool. I have been thinking to hide images without motorcycle. This is getting me started now.
OH MY GOD!!! YESS!! I loved the series soo much, I would totallyy do this to my car !! Or rather my partner's car haha!!
First of all really enjoyed seeing the row of truly how many different things you tried...it was oddly encouraging.
I'd like to see a bits video over pressure pots and vacuum chambers and stuff; at what level you really need them, and how to find a good one vs a "cheap" one. If I'm missing it and there's already one I'm sorry I did look and couldn't find anything.
Came out really good!
Keep up the great work guys!
Loved this project!
I always stay for the bloopers, they make me crack up
Really awesome project! I just finished an episode of shield went to youtube and saw this in my subscription box👏 ill try to copy this at home 😋
Really cool. Fun episode.
This is so cool.... congratulations!!!
This should go directly to the store! it is super awesome!
It would look even more badass with the other logos shaven, cool project!
Really cool. I have 65 beetle, I've been planning to but same type custom horn you did, but with transformers sound. (already have all the parts for it, just need to make the leap) This summer I also lost one of my wheel center caps, and been planning about doing new ones with transformers logo. But this gave me idea of doing vw logo, and hide that transformers logo behind....
Cool, basically something very few could even make. Great idea!
This would make a great escape room puzzle. I have a world globe for a puzzle box thanks to you.
Weird it changed colour. Must be something to do with the resin?
great video! would love to see more resin projects too.
Now that is just wicked cool stuff! Awesome stuff!
Okay that's freaking awesome
That was AWESOME!!
Really cool idea! Keep it up Bob!
LOVE it, this is awesome!
Dude I love badges in new Suburban! Good job man
Very interesting👍
And the result is so clean, Hydra is probably looking to hire you now.
Love the project, looking forward to seeing more of your work.
This was some of the coolest ish EVER!
You've already refinished a guitar, but now I think you should BUILD one!
That is a really cool and thoughtful project :D
And I like that you always mention alternative methods for the people with not your workshop ^^
Good job as always bob
Cool project! Nice truck.
What if you made the epoxy disc first then lightly super glued the badge with the ink together. Would that make a clearer image of the UV ink?
This is absolutely brilliant! I have a very black car too and it is often referred to as a 'bat mobile'. i am going to hide a batman logo behind the BMW badge! thanks for the inspiration!!
That is ridiculously cool ....
Dude, awesome idea and execution!!👍🏻👍🏻